United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Wilesco
Available
-
With this kit, young
steam fans are shown how
nostalgic energy is
created.For this purpose
every kit contains an
easy to understand and
illustrated instruction
pamphlet.Even the least
experienced model builder
can assemble this kit in
a very short time.The
assembly contains no
soldering work as all
components are screwed
together.This kit has the
same specifications as
the factory produced D 6
Steam Engine, and can be
used to drive the models
from the WILESCO range.
Manufacturer:
WilescoModel: Steam
Engine (D5)
Availability: In Stock
£87.99
Available
-
The Wilesco Steam
Traction Engine is a very
attractive steam traction
engine in a polished
brass and a matt black
finish. A quality model,
made to a high standard,
not only for play value,
but also as a superb show
piece, to grace any
cupboard, shelf or desk.
The technical
specifications are
identical to those of the
standard type Steam
Traction Engine. Running
time is about 15 minutes.
Length, width, Height:
300 x 150 x 200 mm,
Weight: 2, 1 kg, Special
gift box: 360 x 230 x 180
mm. Manufacturer:
WilescoModel: Steam
Traction Engine Black &
Brass (D406)
Availability: In Stock
£275.49
Available
-
The Wilesco Steam Engine
Vertical with mirror
polished and nickel
plated boiler, it has a
diameter of 2.6",
height 6.9", boiler
capacity 30.5 in, with
single boiler flue of
0.8" diameter,
built into the boiler to
improve efficiency and
for steam exhaust, with
elongated water gauge
glass. Boiler house true
to life, colored and
copper plated with
embossed brick type
walls. Footbridges with
railings and ladder.
Spring loaded safety
valve, dome whistle,
steam regulator, steam
jet oiler, flywheel of
3.1" diameter, with
large grooved pulley,
finely painted bearing
frame of cast aluminum.
Vertical, reversible
double-action brass
cylinder with flywheel.
Finely painted metal base
plate. Don't forget the
Esbit Fuel and the Steam
Oil! Manufacturer:
WilescoModel: Steam
Engine - Vertical
(D455)Base 5.7" x
8.1". Height,
including smoke stack,
13". Weight: 2 lbs.
13oz.
Availability: In Stock
£189.99
Available
-
The Wilesco D3 Steam
Engine is the smallest
and the latest Steam
Engines in the Wilesco
range with a mirror
polished brass boiler,
with a diameter of 45mm,
length 90mm and a boiler
capacity 50cmx3. The base
plate and the boiler
housing are made of
printed sheet steel. The
showing glasses are at
the same time the water
gauge glasses. Boiler
with spring loaded safety
valve, oscillating
cylinder and piston,
flywheel of 35mm diameter
and grooved pulley. Base
plate 160 x 125mm,
Height 190mm, Weight 0,
5kg Manufacturer:
WilescoModel: Steam
Engine (D3)
Availability: In Stock
£69.25
Available
-
The Wilesco D20 Steam
Engine has a mirror
polished and nickel
plated boiler, with a
diameter of 2.6",
length 6.5", boiler
capacity 30.5 in, with
water gauge glass, water
drain cock. Boiler house
true to life, colored,
and copperplate, with
embossed brick type
walls, 2 footbridges
with railing and 2
ladders. Double action
reversible brass cylinder
with flywheel, spring
loaded safety valve,
additional steam whistle
with chain, pressure
gauge, steam regulator,
flywheel of 3.9"
diameter with grooved
pulley, sturdy
attractive die cast
piston rods, centrifugal
governor, steam jet
oiler and railing. Finely
painted metal. New Steam
Exhaust! The steam is
exhausted through the
stack to make it look
realistic - picture is
not accurate - new
artwork coming soon.
Don't forget the Esbit
Fuel and the Steam Oil!
Base plate 11.4" x
13.8", Height
including smoke stack
12.6", Weight 5lbs
4oz
Availability: In Stock
£284.99
Available
-
The Wilesco D16 Steam
Engine with mirror
polished and nickel
plated boiler, has a
diameter of 2.25",
length 5.5", boiler
capacity 15in, with
water gauge glass. Boiler
house with embossed brick
type walls, 2
footbridges with ladder.
Double action reversible
brass cylinder with
flywheel, spring loaded
safety valve, additional
steam whistle with chain,
steam regulator,
flywheel of 3.25"
diameter with grooved
pulley, sturdy
attractive die cast
piston rods, centrifugal
governor, steam jet
oiler and railing. The
condensed water is fed to
a tank, hidden behind
the boiler house,
causing the chimney to
smoke realistically.
Finely painted metal.
Don't forget the Esbit
Fuel and the Steam Oil!
Base plate 9.75" x
12.25", Height
including smoke stack
11.0", Weight 3lbs
10oz.
Availability: In Stock
£227.99
Available
-
The Wilesco M72 Elephant
Roundabout is a varnish
and printed, tin plate
toy, which is driven by
your steam engine. This
Wilesco steam accessory
has an excellent finish
and would be a fantastic
addition to any Wilesco
Live Steam collection.
Manufacturer:
WilescoModel: M72
Elephant Roundabout
Availability: In Stock
£39.99
Available
-
The Wilesco Steam Turbine
has made the live steam
engine go into the new
millennium. They are the
successors of the
traditional steam engines
and replaced it more and
more during the last
decades. Turbines are
used today in the
aeronautics as well as in
power stations. The first
model of this range is
mounted on a
light-colored and printed
base plate. A graph shows
the course of the torque
dependent on the speed
and a manometer shows the
pressure in the nickel
plated boiler. Of course,
Wilesco's accessories -
which are of known
quality - can be operated
with the Steam Turbine.
Finely painted metal base
plate 12.5" x
10". Height,
including smoke stack,
12.5". Weight: 5
lbs. Manufacturer:
WilescoModel: Steam
Turbine (T90)
Availability: In Stock
£264.99
Available
-
Fully operational
steamroller in kit form,
for the enthusiast. With
clear and understandable
instruction pamphlet In
an attractive gift box
(590 x 510 x 60 mm).The
technical details are the
same as the finished
models. Manufacturer:
WilescoModel: Steam
Roller (D375)
Availability: In Stock
£234.99
Available
-
The Wilesco Steam Engine
Oil is for the
lubrication of pistons,
cylinders as well as all
other bearings. This is a
special oil designed for
all Wilesco live steam
engines. Purchase the
correct oil to ensure
long running life and
trouble free maintainence
of your model.
Manufacturer:
WilescoModel: Steam
Engine Oil (Z83)
Availability: In Stock
£2.99
Available
-
The Wilesco Steam Roller
Black & Brass Kit is a
quality model made to a
high standard, not only
for play value, but also
as a superb show piece,
to grace any cupboard,
shelf or deskIt has a
smoke stack and a
traditional steering
wheel chain drive.The
Flywheel has a Diameter
of 8cms with grooved
pulley.Clutch engaged
gear wheel, permitting
the use of the machine as
a stationary steam
engine.Operating time
about 15 minutes per fuel
charge.Length, width,
Height Weight Special
gift box: 320 x 150 x 200
mm: 2, 5kg: 360 x 230 x
180 mm Manufacturer:
WilescoModel: Steam
Roller Black & Brass
(D376)
Availability: In Stock
£275.99
Available
-
This kit is the best way
to begin for anyone who
is keen on steam
technologyThe mounted kit
has the same
specifications as the
factory produced D10
Steam Engine and has
power enough to run
models from the Wilesco
rangeIt is easy to
assemble even for an
inexperienced steam fan
using the illustrated
instruction pamphlet.
Manufacturer:
WilescoModel: Steam
Engine (D9)
Availability: In Stock
£149.99
Available
-
The Wilesco D24 Steam
Engine with a brass
boiler that is hard
soldered and with a
capacity of 34.8in with a
nickel plated mirror
polished brass jacket for
improved insulation, it
has a diameter of
2.8", length
6.5", with water
gauge glass, water drain
cock. Boiler house true
to life, colored and
copper plated, with
embossed brick type
walls, fire door, 2
footbridges with railing,
2 ladders. Double action
reversible brass cylinder
with flywheel, spring
loaded safety valve,
additional steam whistle
with chain, flywheel of
3.9" diameter with
large grooved pulley and
sturdy attractive die
cast piston rods,
centrifugal governor and
railing. instrument panel
with steam regulator,
pressure gauge and steam
jet oiler. Finely painted
metal. Don't forget the
Esbit Fuel and the Steam
Oil! Base plate
13.0" x 16.5",
Height including smoke
stack 15.7", Weight
7lbs 3oz. Manufacturer:
WilescoModel: Steam
Engine (D24)
Availability: In Stock
£598.49
Available
-
The Wilesco D22 Steam
Engine Twin Cylinder self
starting operation with
transmission. This live
steam engine is a
technically complete
model which is impressive
with its decorative
silver/black finish.
Brass boiler, highly
polished and nickel
plated, with a diameter
of 2.6", length
6.5", boiler
capacity 30.5in, sight
glass as water level
indicator, water
draining valve, spring
loaded safety valve,
steam whistle with chain,
pressure gauge, hand
wheel, steam shut off
valve, boiler housing in
black, 2 footbridges
with gallery rail and 2
ladders. The unit is
situated on a raised
metal base with two
double action fixed brass
cylinders, steam jet
oilers, flywheel
diameter 3.1", with
large drive plate,
forward and reverse
movement, collecting
tray for condensed water,
fixed transmission with
several drive wheels.
Silver colored metal
base. New Steam Exhaust!
The steam is exhausted
through the stack to make
it look realistic -
picture is not accurate -
new artwork coming soon.
Don't forget the Esbit
Fuel and the Steam Oil!
Base 11.4" x
13.8", height
including smoke stack
12.6". Weight: 5
lbs. 10oz. Manufacturer:
WilescoModel: Steam
Engine - Twin Cylinder
(D22)
Availability: In Stock
£414.99
Available
-
The Wilesco Steam Roller
Old Smokey toy steam
engine with a mirror
polished and nickel
plated boiler, It has a
diameter of 1.8",
length 7.3", boiler
capacity 14 in, with
water gauge glass. Double
action reversible brass
cylinder, with flywheel,
spring loaded safety
valve, steam regulator,
steam whistle, steam jet
oiler and footbridge.
Smoke stack, traditional
steering wheel chain
drive. Flywheel with a
diameter of 3.2"
with grooved pulley.
Clutch engaged gear
wheel, permitting the
use of the machine as a
stationary steam engine.
Operating time about 15
minutes per fuel charge.
Anodized aluminum
rollers. Finely painted,
matching colors.
Available in Green/Red or
Brass/Black. Length,
12.6" width
5.9", Height
7.9", Weight: 3
lbs. 13oz. Manufacturer:
WilescoModel: Steam
Roller - Old Smokey
(D365)
Availability: In Stock
£249.99
Available
-
The Wilesco D456 Steam
Engine Black & Brass. A
very attractive model
steam engine from Wilesco
which catches the eye
with the decorative color
combination of
black-brass. Fully
functional. The brass
parts are coated with a
clear varnish to prevent
discoloration or
oxidation.The technical
details, The brass
boiler has a 2.6"
diameter, height
6.9", boiler
capacity 30.5 in, flue,
water level indicator,
vertical, reversible
double action brass
cylinder, steam dome
whistle, spring safety
valve etc. Don't forget
the Esbit Fuel and the
Steam Oil! Brass base
plate 5.7" x
8.1". Height
including smoke stack
13", Weight: 2lbs
13oz. Manufacturer:
WilescoModel: Steam
Engine - Vertical Black &
Brass (D456)
Availability: In Stock
£260.99
Available
-
Wilesco Showman's Engine
Kit (D 419) The Wilesco
D419 Showmans Engine Kit
is a fully working live
steam engine from the
range of Wilesco Hobby
Technique. This
technically perfect model
D419 has been painted in
matching colors. This
build it yourself kit is
a new release for 2008
and offers the steam
enthusiast the
opportunity to build this
classic Showmans Engine
for themself. A
chemically black painted
brass boiler which has a
diameter of 1.8",
length 7.3", boiler
volume 14 in, with a
water gauge glass.
Powerful, double action
reversible cylinder.
Flywheel with a diameter
of 3.2". The
showman's engine can be
run in forward or reverse
depending on the movement
of the flywheel. Spring
loaded safety valve,
steam regulator, steam
whistle, steam jet oiler
and footbridge,
traditional chain
steering. A clutch
engaged gear wheel
permits the use of the
engine and the operation
of the dynamo either
stationary or driving.
The dynamo illuminates
the eight diodes mounted
around the canopy of the
engine. The condensed
water of this engine is
collected below the smoke
stack. Operating time
about 15 minutes per fuel
charge.All single parts
are manufactured from
finely painted metal. A
fully working live steam
engine from the range of
WILESCO Hobby TechnicThis
technically perfect model
has been painted in
matching coloursA
chemically black painted
brass boiler, diameter
45 mm, length 185 mm,
boiler volume 230 cm³
with water gauge
glassPowerful, double
action reversible
cylinderFlywheel with a
diameter of 80 mmThe
showman's engine can be
run in forward or reverse
depending on the movement
of the flywheelSpring
loaded safety valve,
steam regulator, steam
whistle, steam jet oiler
and footbridge,
traditional chain
steeringA clutch engaged
gear wheel permits the
use of the engine and the
operation of the dynamo
either stationary or
drivingThe dynamo
illuminates the eight
diodes mounted around the
canopy of the engineThe
condensed water of this
engine is collected below
the smoke stackOperating
time about 15 minutes per
fuel chargeAll single
parts are manufactured
from finely painted
metal.At the beginning of
the twentieth century,
this so called Showman's
Engine could be found at
every funfair It was used
to drive the showman's
roundabouts and to
provide illumination for
the fairground.The
oldtimers were decorated
with bright colours and
fitted with a dynamo so
that they could generate
their own electricity.
Manufacturer: WilescoPart
/ Model Number: D 419
Availability: In Stock
£399.99
Available
-
The Wilesco D14 Steam
Engine with a Mirror
polished and nickel
plated boiler, diameter
of 55mm, length 140mm,
boiler capacity 250cm,
with water gauge glass.
Boiler house true to
life, coloured and
copperplated, with
embossed brick type
walls, 2 footbridges.
Double action reversible
brass cylinder with
flywheel, spring loaded
safety valve, dome
whistle, flywheel of 80
mm diameter with grooved
pulley, steam jet oiler.
All condensed water is
collected in a gathering
tray below the smoke
stack and the chimney
smokes just like the
original. Finely painted
metal. Manufacturer:
WilescoModel: Wilesco
Steam Engine (D14)
Availability: In Stock
£142.49
Available
-
Through the steam engine
heat and water (steam)
are transformed into
mechanical energy, after
the dynamo is connected
mechanical energy is then
transformed into
electricity, bulb 1, 5
Volts.WARNING: This model
is not suitable for steam
engines D3, D5, D6,
D8, and D12 due to power
requirements
Manufacturer:
WilescoModel: Dynamo
(M66)
Availability: In Stock
£28.99
Available
-
The technology of this
engine represents a
combination of D20 and
D16 and is enhanced by a
number of technical
refinements. It has a
boiler capacity of 530
ccms with a dynamo to
supply the lamp with
current, water drain
cock, spring loaded
safety valve, steam
whistle with chain, shut
off valve, steam oiler
and piston rods made of
diecast metal. Height
including smoke stack 323
mm base, dimensions 300
x 350 mm. Manufacturer:
WilescoModel: Steam
Traction Engine Kit
(D415)
Availability: In Stock
£279.99
Available
-
The Wilesco D48 2
Cylinder Marine Steam
Engine Gas has a polished
and nickelplated boiler,
diameter of 55mm, length
140mm, boiler capacity
250cm, with water gauge
glass, spring loaded
safety valve, filler
cap. Boiler heated with
butane gas. Removable
nickelplated gas holder
with filler and
regulating valve,
suitable for all
conventional filling
devices. Gas consumption
about 20g, flywheel with
a diameter of 50 mm,
fully reversible
(allowing forward and
reverse), self starting
automatic drive.
Installation of an
universal coupling with a
diameter of 4mm is
possible on either side
of the drive shaft. Fully
reversible steam
regulator, infinitely
variable, RC-connection
can be joined to the
reversing lever. Don't
forget the Esbit Fuel and
the Steam Oil! Weight
(complete) 1, 0kg (1, 3kg
with filled boiler). Size
of base plate boiler and
gas holder: Length 180mm,
width 110mm, height
140mm, weight 0, 6kg.
Aggregate: Length 125mm,
width 90mm, height
100mm, weight 0, 4kg.
Manufacturer:
WilescoModel: Steam
Engine - Marine Twin
Cylinder (D48)
Availability: In Stock
£459.99
Available
-
The Wilesco D10 Steam
Engine, with mirror
polished and nickel
plated boiler, with a
diameter of 1.75",
length 4.5", boiler
capacity 9.4in, with
water gauge glass. Boiler
house true to life,
colored and copper
plated, with embossed
brick type walls, 2
footbridges.
Double-action reversible
brass cylinder with
flywheel, spring loaded
safety valve, dome
whistle, flywheel of
3.0" diameter with
grooved pulley,
centrifugal governor,
steam jet oiler. All
condensed water is
collected in a gathering
tray below the smoke
stack and the chimney
smokes just like the
original. Finely painted
metal. Base plate
7.75" x 10.0",
Height including smoke
stack 9.0", Weight
2.4 lbs. Manufacturer:
WilescoModel: Steam
Engine (D10)
Availability: In Stock
£161.49
Available
-
The Wilesco Steam Engine-
Oscillating has a Mirror
polished and nickelplated
boiler, with a diameter
of 45mm, length 100mm,
boiler capacity 135cm
with water gauge glass.
Boiler house, true to
life, coloured and
copperplated, with
embossed brick type
walls. Oscillating brass
cylinder and piston,
spring loaded safety
valve, dome whistle,
flywheel of 70mm diameter
with grooved pulley.
Finely painted metal.
Base plate 140 x 200mm,
Height including smoke
stack 220mm, Weight 0,
8kg, Special gift box
210 x 150 x 150mm
Manufacturer:
WilescoModel: Steam
Engine - Oscillating (D6)
Availability: In Stock
£94.99
Available
-
The Wilesco D49 2
Cyl-V-Marine Steam Engine
with a mirror polished
brass boiler, diameter
of 65mm, height 100mm,
capacity 300cm, with
water gauge glass,
spring loaded safety
valve, steam whistle
with chain. 2 double
action brass cylinders
with steam jet oilers in
a V-shape, self starting
automatic drive (allowing
forward and reverse),
infinitely variable.
RC-connection can be
joined to the reversing
lever. Suitable for model
boats of 800mm long.
Operating time approx. 15
minutes. Don't forget the
Esbit Fuel and the Steam
Oil! Base plate for
boiler 120 x 105 mm,
height (incl. funnel) 240
mm, weight (incl.
aggregate) approx. 0, 9
kg
Availability: In Stock
£313.49
Available
-
The Wilesco Steam Fire
Engine is based on an
original which was
produced by Magirus in
Germany at the beginning
of the last century. The
Fire engine is operated
by the steam engine. It
can be driven forward and
reverse. The speed is
regulated by using the
speed control valve.
Further details:Vertical
mirror polished brass
boiler with a diameter of
3.2"height
5.9"boiler capacity
27.5 inelongated gauge
glassSingle boiler flue
with a diameter of.
8" built into the
boiler to improve
efficiency and for the
escape of steam
exhaust.Safety flue
attachment. Vertical
reversible double action
brass cylinder. Flywheel
with a diameter of
3.2", spring loaded
safety valve, steam
whistle with chain,
steam regulator,
gathering tray for
condensed water, die
cast wheels with solid
rubber tires, wooden
seats, fire bell. Two
lacquered die cast lamps,
steering wheel for the
front wheels. Clutch
engaged gear transmission
with chain drive to the
rear axle. When the fire
engine is stationary and
the clutch is disengaged
the water pump can be
operated. The water tank
is under the front seat,
with hose leading to the
pump. Squirts up to 9.8
ft. Two removable reels,
each with a hose of
31.5" length,
coupling and jet. This
Wilesco model is finished
in red, black and brass.
Operating time approx. 15
minutes. Length
16.2",
width7.5", Height
9.8", Weight: 7
lbs. 3oz. Manufacturer:
WilescoModel: Steam Fire
Engine (D305)
Availability: In Stock
£449.99
Available
-
The Wilesco M70 Merry Go
Round is a varnish and
printed, tin plate toy,
which is driven by your
steam engine. This
Wilesco steam accessory
has an excellent finish
and would be a fantastic
addition to any Wilesco
Live Steam collection.
Manufacturer:
WilescoModel: Merry Go
Round (M70)
Availability: In Stock
£32.00
Available
-
The Wilesco Showman's
Engine is a fully working
live steam engine from
the range of Wilesco
Hobby Technique. This
technically perfect model
has been painted in
matching colors. A
chemically black painted
brass boiler which has a
diameter of 1.8",
length 7.3", boiler
volume 14 in, with a
water gauge glass.
Powerful, double action
reversible cylinder.
Flywheel with a diameter
of 3.2". The
showman's engine can be
run in forward or reverse
depending on the movement
of the flywheel. Spring
loaded safety valve,
steam regulator, steam
whistle, steam jet oiler
and footbridge,
traditional chain
steering. A clutch
engaged gear wheel
permits the use of the
engine and the operation
of the dynamo either
stationary or driving.
The dynamo illuminates
the eight diodes mounted
around the canopy of the
engine. The condensed
water of this engine is
collected below the smoke
stack. Operating time
about 15 minutes per fuel
charge. All single parts
are manufactured from
finely painted metal.
Length 13.0", width
5.9", Height
7.9", Weight: 4
lbs. Manufacturer:
WilescoModel: Showman's
Engine (D409)
Availability: In Stock
£379.99
Available
-
The Wilesco Steam
Traction Engine has a
mirror polished and
nickel plated boiler with
a diameter of 1.8",
length 7.3", boiler
capacity 14 in, with
water gauge glass. Double
action reversible brass
cylinder, with flywheel,
spring loaded safety
valve, steam regulator,
steam whistle, steam jet
oiler and footbridge.
Smoke stack, traditional
steering wheel chain
drive. Flywheel with a
diameter of 3.2"
with grooved pulley.
Clutch engaged gear
wheel, permitting the
use of the machine as a
stationary steam engine.
Operating time about 15
minutes per fuel charge.
Anodized aluminum wheels.
Finely painted, matching
colors. Available in
Blue/White or
Brass/Black. Length
11.8", width
5.9", Height
7.9", Weight: 3.7
lbs. Manufacturer:
WilescoModel: Steam
Traction Engine (D405)
Availability: In Stock
£246.99
Available
-
The Wilesco Steam
Locomobile was used
around the turn of the
century by farmers for
threshing and plowing. It
was horse drawn but was
also frequently self
propelled and was capable
of moving under its own
steam at speeds of 1.5 to
2.5 miles per hour. This
sophisticated steam model
has a wealth of technical
details and it looks good
too in its livery of
black combined with
brass. Details:Brass
boiler has a diameter of
2.2", length
9.1".This engine has
a partitioned smoke
chamber at the front for
the condensation and to
allow the smoke to escape
through the chimney,
which is hinged in the
middle.The sight glass
acts as a water gauge.
Reversible double action
cylinder with two
flywheels with a diameter
of 3.2" which can be
operated in forward and
reverse.Exact indicating
pressure gauge, spring
loaded safety valve,
whistle with chain,
governor (just for show),
steam regulator, steam
jet oiler, water drain
tap, black varnished
boiler house with
gangways and ladder. The
Wilesco locomobile is
driven by a chain and the
front axle can be
steered. Operating time
approx 15 minutes. The
model is heated by dry
spirit tablets. All parts
are either painted or
plated. Length
10.2", width
5.9", Height
8.3", Weight: 4
lbs. 7oz. Manufacturer:
WilsecoModel: Steam
Locomobile (D430)
Availability: In Stock
£349.99
Available
-
Mirror polished boiler,
diameter 65 mm, length
160 mm, capacity 530
ccms. Brick type walls,
two footbridges with
railings and two ladders.
Double acting reversible
brass cylinder with
flywheel, spring loaded
safety valve, additional
steam whistle with chain,
pressure gauge, steam
regulator, sturdy
diecast piston rods and
centrifugal governor.
Manufacturer:
WilescoModel: Steam
Engine - With Pump (D21)
Availability: In Stock
£384.99
Available
-
The Wilesco Esbit Fuel
Tablets differ from most
other solid fuel tablets
in that they are
non-toxic and completely
consume themselves when
burned. Most other fuel
tablets leave a toxic
residue behind. The
manufacturer states that
Esbit fuel tabs can be
safely burned inside a
properly ventilated room.
very small and extremely
light weight.burn for
about 15 minutes and are
a greatlive steam engine
fuel.Sold by the box. One
box contains 20 tablets 4
grams each.Shown in
picture is one CASE of
esbit which contains 36
boxes. Manufacturer:
WilescoModel: Esbit Fuel
Tablets (Z81)
Availability: In Stock
£3.50
Available
-
The Wilesco Water Cart
has a silver-coated brass
tank with water drain
cock, cast iron spoked
wheels, trailer
coupling, finely
painted, matching
colours. It is designed
as a trailer for Steam
Roller - Old Smokey or
Steam Traction Engine
which has a tremendous
play value. Manufacturer:
WilescoModel: Water Cart
(A385)
Availability: In Stock
£47.49
Available
-
The Wilesco Steam Engine
is a complete workshop.
The countershaft fitted
under the roof, drives
the circular saw, the
two-wheel grinder, the
drilling machine and the
hack saw, like in
grandpa's days. Technical
details:mirror polished
brass boiler, diameter
5, 5cms, length 13,
5cms, boiler capacity
320ccms, with water
gauge glass.Boiler house
true to life coloured and
copper-plated with
embossed brick type
walls, two foot-bridges
with ladder.Double-acting
reversible brass cylinder
with flywheel, spring
loaded safety valve,
pressure gauge, flywheel
of 8cm diameter with
grooved pulley, steam
jet oiler.All condensed
water is collected in a
sliding tray below the
smoke stack and the waste
steam is exhausted
through the smoke stack.
Manufacturer:
WilescoModel: Steam
Workshop (D141)
Availability: In Stock
£294.99
Available
-
Vertically mounted
reversible double-acting
brass cylinder, with
flywheel, flexible
plastic pipe to connect
the boiler and engine
assembly. Brass universal
coupling. Operating time
about 15 minutes per fuel
charge. Manufacturer:
WilescoModel: Steam
Engine - Marine (D52)
Availability: In Stock
£156.69
Available
-
The Wilesco Water Cart
Black & Brass is a
suitable water cart as an
accessory to the Steam
Roller - Black & Brass.
It has a Polished brass
boiler that is fitted on
a matt black chassis with
trailer coupling.
Manufacturer:
WilescoModel: Water Cart
- Black & Brass (A386)
Availability: In Stock
£52.19
Available
-
Limited EditionComplete
steamboat "African
Queen" with wooden
hull and fully
operational steam engine
from Wilesco. Technical
specifications:Height
40cmLength 70cmWidth
20cmScale1/12Weight
2kgBoiler capacity120
cm³ A rather lovely
model! Manufacturer:
WilescoModel: African
Queen Steam Boat (D70)
Availability: In Stock
£599.99
Available
-
The Wilesco Traction
Steam Engine Kit is fully
operational steam roller
and traction engine in
kit form, for the
enthusiast. With clear
and detailed easy to
follow assembly
instructions. In an
attractive gift pack with
large poster. The
technical details are
identical to the
assembled models. It's
not necessary to solder.
Manufacturer:
WilescoModel: Steam
Traction Engine Black &
Brass Kit (D416)
Availability: In Stock
£275.49
Available
-
The Wilesco Lumber Wagon
has Cast iron
spoked-wheels,
nickelplated chains with
clasps, 15 genuine
wooden logs of 16 mm
diameter, length 220 mm,
trailer coupling, all
metal parts finely
painted, matching
colours. It is a suitable
trailer for Steam
Traction Engine or for
Steam Roller - Old
Smokey. Length 330 mm,
width 110 mm, height 130
mm. Manufacturer:
WilescoModel: Lumber
Wagon (A425)
Availability: In Stock
£47.49
Available
-
The Wilesco M77 Swing
Boats is a varnish and
printed, tin plate toy,
which is driven by your
steam engine. This
Wilesco steam accessory
has an excellent finish
and would be a fantastic
addition to any Wilesco
Live Steam collection.
Manufacturer:
WilescoModel / Part No:
Swing Boats (M77)
Availability: In Stock
£49.99
Available
-
The Wilesco Steam Engine
with Accessories. All
units mounted on a finely
painted metal base plate.
Don't forget the Esbit
Fuel and the Steam Oil!
Base plate 13.4" x
16.5". Height
including smoke stack
11.0", Weight 6lbs
10oz. Manufacturer:
WilescoModel: Steam
Engine with Accessories
(D161)
Availability: In Stock
£303.99
Available
-
The Wilesco Lumber Wagon
Black & Brass is a lumber
wagon with 15 genuine
wooden logs as an
accessory to the Steam
Traction Engine - Black &
Brass. Polished brass
parts, off-set in black,
with trailer coupling.
Manufacturer:
WilescoModel: Lumber
Wagon - Black & Brass
(A426)
Availability: In Stock
£52.19
Denmark