Futaba S3010 Servo Std BB 0.16s/6.5Kg (P-S3010) Medium duty, standard sized servo with that bit of extra power and speed. Ideal for sport applications. Single ball bearing. Specification:Weight: 41gDimensions: 40 x 20 x 38.1mmSpeed: 0.16 sec/60° (6.0v)Torque: 6.5 Kg/cm (6.0v)Voltage: 4.8v/6.0v
Futaba 8ch MM Tx 2.4GHz FAAST (Tx-N) (P-T8FG2-4G) The new and innovative Futaba 8FG is the perfect radio for those sport pilots looking to take the next step forward in their flying, offering full 8-channel FASST 2.4GHz performance allied to trend-setting styling and fast, ultra-simple programming with its unique touch sensor input. Features:Big, 128 x 64 LCD with backlighting, adjustable contrast & auto-off Touch sensor programming 20-model memory (expandable with optional SD card) 10-character user name 10-character model name Basic and Advanced menus Enhanced aircraft, heli and glider software Mode 1-4 selectable (Modes 3 and 4 programmable) Assignable functions/switches 2 proportional sliders Digital trims on all 4 main channels Fail-safe, servo reversing and EPA Aircraft and heli gyro mixes
Futaba Servo HV Digital - 0.16s/10.5Kg (P-S3051HV) A competitively priced high voltage digital servo offering good speed and torque figures, with 3-pole motor for general applications. Specification:Weight: 49gDimensions: 40 x 20 x 38mmSpeed: 0.16 sec/60deg (7.4v)Torque: 10.5 kg/cm (7.4v)
Futaba 6ch Radio Control System S3003 x 4 FM40 (N) M2 R136F (P-FP6EXP/40L) Never ones to rest on their laurels, Futaba have continued to develop their market leading 6 channel set, and now proudly announce the release of the new 6EXP transmitter, which offers both aircraft and helicopter functionality, together with the ability to operate all Futaba PPM and PCM 1024 receivers (35/40MHz systems only). New additions to the already powerful functions include a second free programmable mix and twin rate flap trim in aircraft mode, and a third swashplate mode and swash/throttle mix in heli mode. Features:6 model memoryDual ratesExponentialPPM/PCM operationFailsafe (PCM only)Servo reverseEnd point adjustmentTrainer switch Specification: Channels: 6
Futaba S3001 Standard BB Servo 0.22s/3.0Kg (P-S3001) Economical servo for all applications. This ballraced servo has an exceptionally long service life. Ideal for use with cars, power boats, yachts, aircraft and helicopters. SpecificationWeight:45.1Dimensions:40.4 x 19.8 x 36mmSpeed:0.22 sec/60° (6.0v)Torque:3.0 Kg/cm (6.0v)Voltage:4.8v/6.0v
Futaba 6ch Rx Micro 2.4GHz FHSS (Air) (P-R2106GF/2-4G) This new 6 channel receiver is perfect for all type of park fly models, both fixed wing and helicopters. Weighing only 4 grams and with extremely compact dimensions this new FHSS receiver is going to be very popular! Specification:Range: 300mLength: 38mmHeight: 10mmWeight: 4gVoltage: 4.8 - 7.4VChannels: 6 ChFrequency: 2.4GHz FHSSWidth: 21mm
Futaba 2ch Radio Control System S3003x2 AM27 (D) (P-FP2ER) Futabas great value 2 channel radio control system includes a transmitter, R122JE receiver, 2 x S3003 servos, and battery box. Features:Digital proportional 2 channel systemNew easy grip streamlined profileShort stick length for precise controlServo reversers on both channelsExternally mounted charge socket for easy accessSupplied with R152 receiver and two standard size S3003 servosAluminium stick tops
Futaba CRS503/BB 7kg Retract Servo (P-CS503R/BB) The CS503 is a lightweight low profile servo with 180 degrees of travel designed specifically for use with mechanical retractable undercarriage & similar specialist functions. Fitted with nylon gears and a ballraced output, it also has a slower transit speed for greater realism. Specification:Weight: 28gDimensions: 42 x 21.5 x 22mmSpeed: 0.31 sec/60° (4.8v)Speed: 0.27 sec/60° (6.0v)Torque: 6.1 Kg/cm (4.8v)Torque: 7.0 Kg/cm (6.0v)
Futaba FP-S148 Standard Servo 0.22s/3.0Kg (P-S148) One of the most popular general purpose servos, with a reputation thats second-to-none. Ideal for use with cars, power boats, yachts, electric and i.c.- powered aircraft and helicopters. SpecificationWeight:44.4gDimensions:40.4 x 19.8 x 36mmSpeed:0.22 sec/60° (6.0v)Torque:3.0 Kg/cm (6.0v)Voltage:4.8v/6.0v
Futaba CRS503/BB 7kg Retract Servo (P-CS503R/BB) The CS503 is a lightweight low profile servo with 180 degrees of travel designed specifically for use with mechanical retractable undercarriage & similar specialist functions. Fitted with nylon gears and a ballraced output, it also has a slower transit speed for greater realism. Specification:Weight: 28gDimensions: 42 x 21.5 x 22mmSpeed: 0.31 sec/60° (4.8v)Speed: 0.27 sec/60° (6.0v)Torque: 6.1 Kg/cm (4.8v)Torque: 7.0 Kg/cm (6.0v)
CS703/MG 7.5kg Metal Geared Servo (P-CS703/MG) The CS703 has been developed to offer a mid range servo with a high specification at a low price, and includes such features as metal gears and ballraced output together with excellent speed and torque figures, making it an ideal upgrade from a standard servo. Specification :Weight: 56gDimensions: 41 x 20 x 38mm Speed: 0.22 sec/60° (4.8v)Speed: 0.18 sec/60° (6.0v) Torque: 5.5 Kg/cm (4.8v)Torque: 7.5 Kg/cm (6.0v)
Futaba CS704/MG 14.6kg Metal Geared Servo (P-CS704/MG) The most powerful servo in the Cirrus range is the CS704, which provides an incredible 14.6Kg/cm torque at 0.15sec/60 degree speed on 6.0 volts. This is the perfect servo for extreme applications such as steering on monster trucks, or primary controls on large aircraft. Specification:Weight: 56gDimensions: 41 x 20 x 38mmSpeed: 0.17 sec/60° (4.8v)Speed: 0.15 sec/60° (6.0v)Torque: 13 Kg/cm (4.8v)Torque: 7.5 Kg/cm (6.0v)
Futaba S3050 Servo Digital Mtl/Gear 0.16s/6.5Kg (P-S3050) This new digital servo gives the same high torque and speed as the very popular S3010 servo and then adds digital holding power and accuracy. With two ball bearings and metal gears, this versatile servo is ideal for a wide variety of applications. Specification:Weight: 48.8gDimensions: 40.0 x 20.0 x 38.1mmSpeed: 0.16 sec/60° (6.0v)Torque: 6.5 Kg/cm (6.0v)Voltage: 4.8v/6.0v
Futaba 8ch Rx 2.4GHz FASST (FS/HS Mode) (P-R6008HS/2-4G) This 8-channel receiver from Futaba differs from all previous receivers because it can run on 2 modes. Theres Normal Mode", where the receiver works like all previous Futaba 2.4 GHz receivers, but theres also a High Speed setting, with high resolution for the demanding modeller.Normal Mode accepts any type of servos or peripherals, as the output frame rate is 14ms. High Speed Mode only accepts digital servos (including BLS series) in channels 1 to 6, and most peripheral equipment such as the gyros or brushless ESCs.The frame rate of the outputs is 7ms (twice the standard speed). The outputs for other channels allow the use of any type of servo, as the frame rate of these outputs are still 14ms on the High Speed Mode. Specification:Channels: 8 Weight: 0.5oz (13.5g) Dimensions: 1.8 x 0.9 x 0.5" (45 x 22 x 13mm) Power Requirement: 4.8 or 6.0V battery, or regulated output from ESC
Futaba 2ch Radio System S3003x2 AM40 (D) (P-FP2ER/40A) Futabas great value 2 channel radio control system includes a transmitter, R122JE receiver, 2 x S3003 servo’s, and battery box. Features:Digital proportional 2 channel systemNew easy grip streamlined profileShort stick length for precise controlServo reversers on both channelsExternally mounted charge socket for easy accessSupplied with R152 receiver and two standard size S3003 servosAluminium stick tops
Futama Tx/Rx NiCad/Ni-MH Charger 600/600mA (P-FBC32D/4) This new dual output charger has been developed to suit the new Futaba 6J and 4YF radios as they use lower voltage transmitter packs than most previous radios. Both outputs are suitable to charge 4.8 or 6.0v Ni-MH battery packs, with a charge current of 600mAh and peak detect charge termination. Both output leads have standard Futaba sockets to suit receiver charging, but supplied complete with the charger is a transmitter adapter lead for use with the new lower voltage transmitters. Specification:Max Current: 600mAh
4ch Combo 2.4G FHSS (Dry) R2004GF (P-CB4YFG2-4G) The new 4YF 2.4GHz radio system makes Futaba quality FHSS (Frequency Hopping Spread Spectrum) technology even more accessible, with a low, low price for this high quality system. Supplied in combo format with the matching R2004GF receiver, this full-range set is equally suitable for regular club use or as a second set for park-fly or indoor models, just purchase the appropriate servos from the extensive Futaba range. Linking the transmitter and receiver requires only a simple button press to carry out, whilst the selectable "Power Down" mode simplifies range checking; features such as these make the 4YF the perfect first multi-channel step to the superb, market-leading Futaba radio control family.Please note that the 4YF and R2004GF are dedicated components, and are not compatible with other current Futaba 2.4GHz aircraft systems. Features:Servo Reversing Battery Level Indicator Easy Linking Sport 2.4GHz FHSS System Metallic Coloured Casing
Futaba S3003 Standard Servo 0.19s/4.1Kg (P-S3003) Standard-size economy servo for general applications. Ideal for use with cars, power boats, yachts, electric and i.c.-powered aircraft and helicopters.SpecificationWeight:37.2gVoltage:4.8v/6.0vDimensions:40.4 x 19.8 x 36mmSpeed:0.19 sec/60° (6.0v)Torque:4.1 Kg/cm (6.0v)
Futaba 3ch Rx 2.4GHz FHSS (P-R203GF/2-4G) Supplied as standard with the new 3PRKA radio system, the R203GF receiver utilises Futaba’s new S-FHSS transmission system for ultimate reliability and interference rejection qualities. Specification:Weight: 14gChannels: 3Dimensions: 39 x 26 x 10mm
Futaba 3ch Combo 2.4G FHSS (Dry) R203GF (P-CB3PR/2-4G) Utilising Futaba’s new FHSS 2.4Gz transmission system, this new 3 channel steerwheel system incorporates an internal transmitter aerial which allow a sleek new look, and comes complete with the new R203GF receiver. With the legendary Futaba quality and reliability this competitively priced system is perfect for those looking to buy their first radio, or to upgrade their RTR car or boat with this more dvanced set. Supplied as standard for dry battery operation but can have Ni-MH rechargeable cells/packs fitted. Features:3rd ChannelNo AerialServo ReverseSteering D/REPAErgonomic Grip