United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Warbirds
Available
-
P-47 Thunderbolt 4-Ch
Radio Control RC Scale
Brushed Fighter PlaneThe
P-47 Thunderbolt, (aka
the "Jug") was
the biggest, heaviest,
and most expensive
fighter aircraft in
history to be powered by
a single engine. It was
one of the main United
States Army Air Forces
(USAAF) fighters of World
War II.The P-47 was
effective in air combat
but also a very effective
plane for ground attack.
It had eight. 50-caliber
machine guns, four per
wing. When fully loaded
the P-47 could weigh up
to eight tons.This
aircraft became popular
with many air forces
around the world. The
prototype of the real
plane is pictured on the
right.Once you've opened
the box, this replica
P-47 will be ready for
take-off in only a few
minutes, everything you
need to fly (apart from 8
AA batteries for the
transmitter) is included
in the package. Nitrotek
have specified this plane
with the 35Hz controller
and brushed motor
options, making it an
affordable entry level
outfit, ideal for
someone wanting to buy
their first plane.This
model is lightweight,
extremely tough, and the
fuselage has been
finished, carefully
emulating the details of
the original aeroplane.
This plane features
excellent stability and
awesome aerobatic
capabilities. An
experienced pilot will
have it performing inside
loops, outside loops,
axial rolls, inverted
flight, knife edge,
stall turns,
hammerheads, and even
spins!.SpecsWing span:
830mmLength: 730mmFlying
Weight: 400gPower: 370
carbon brush motorSpeed
Controller: 25A speed
controllerServo:
3x10gBattery: 8.4 V
650mah Ni-MHControl: 4 CH
Multifunctional Radio
Tx/Rx Range: 500
feetFeatures4 CH Full RC
- Aileron, Elevator,
Rudder, ThrottleFull
aerobatic characteristics
Powerful brushed
motorExcellent
stabilityReady to Fly in
Just Minutes!Super
toughlightweightShock
Resistant FuselageStrong
WingsPre-installed
Electronics Suitable for
beginners and expertsOnly
required 8 AA batteries
for the transmitter to
start flyingThis plane is
described as RTF or ready
to fly, this means that
everything except
batteries for the
transmitter is included
in the box and that only
a few minor stages of
assembly remain, such as
attaching the wings and
tailplane. These steps
should take around 30
minutes to complete.
Manufacturer: Guan'Li
Model: P-47 Thunderbolt
4-Ch Radio Control RC
Fighter Plane
Availability: In Stock
£74.99
Available
-
The decal set enables you
to build the model of a
Fw 190A-8 that belonged
to the JG 10, based in
autumn 1944 in Parchim,
North Germany (see the
scheme on the box cover)
or a Fw 190A-7, one of
machines flown in April
1944 by Major Heinz Bär,
commander of the II/JG 1
(colour side view).Spec
CheckWing span: 850
mmLength: 730 mmWing
area: 12, 0 dm2El. motor:
(Not Included) series
280, 300, 330, MPJ,
Mega, AXI ACWeight: max.
440 gControls: Elevator,
ailerons, motor (Radio
Not Included)The model is
not suited for complete
beginners, but its
control with ailerons and
elevator would not bring
problems to any modeller
experienced enough with
elevator/rudder control
models, e.g.
slow-flyers. The flying
qualities and performance
of this scale model of
the Fw 190A-8 are close
to that of much larger
model, i.e. it is more
docile, and flying it
provides fine and
substantially more
colourful experience.The
model kit you have bought
has several typical
features:The semi scale
model is almost finished;
you only have to apply
decals, install the
propulsion unit and the
RC equipment. You can
utilise the kit’s box
as the transport and
storage container for the
finished model. The scale
model is moulded from the
extruded polystyrene foam
(EPSF) with a tougher
surface layer, making
the model less prone to
surface damage. Adding to
that, all exposed
surfaces are reinforced
with plastic covers.
Thanks to the ratio of
the all-up weight and of
the strength of the
material used the model
is quite compact, this
feature reducing the
danger of damage in
normal operation
substantially, to almost
negligible level. When
designing this model a
maximum attention was
devoted to its
aerodynamic layout (e.g.
the semi-symmetrical wing
section, the symmetrical
horizontal tail section),
ensuring high
aerodynamic finesse,
with the resulting wide
band of operational
speeds and docile flying
characteristics typical
for large models.The
range of proven power
units offered enables to
build a scale model
possessing a flight
performance corresponding
to that of the best slow
flyers, as well as to
the fully aerobatic
models.To control the
model you need the RC
equipment suitable for
controlling the
slow-flyers – it would
enable you to fly
majority of the aerobatic
figures (with the
possible exception of
those that require the
rudder control).One of
the decisive factors,
affecting the flight
performance and behaviour
of the model, is its
weight. Due to the
multitude of possible
combinations of the RC
equipment, motors and
power sources (battery
packs) it is impossible
to exactly state the
final weight. In any
case, the weight of the
model without the battery
pack should not exceed
320 grams. With a
double-cell LiPol 1500mAh
battery would probably
weigh in at 380 grams,
with the six-cell 500mAh
NiCd pack about 420
grams. The specified
maximum weight should in
no case be exceeded –
the flight behaviour of
heavier models
deteriorates
accordingly.Model: Alfa
Model Focke Wulf Fw
190A-8 Scale AirplanePart
No: AM0205
Availability: In Stock
£99.99
Available
-
4 CH 2.4G Tiger Moth
Radio Control Brushless
BiplaneThe de Havilland
DH 82 Tiger Moth is a
1930s biplane designed by
Geoffrey de Havilland and
was operated by the Royal
Air Force and others as a
primary trainer. Over
4000 Tiger Moths were
made for the RAF during
World War II, and the
plane remained in service
until 1952. Tiger Moths
are still used
recreationally today.This
replica of the classic
aircraft is virtually
ready to fly straight out
of the box, only about
45 minutes of tinkering
will be required to get
this compact, and quiet
aeroplane in the air.This
model has a tough, but
lightweight airframe,
and the outer shell has
been finished, emulating
the details of the real
thing. The Tiger Moth is
incredibly stable and
will fly at remarkably
low speeds, and at low
altitude making it
simple, safe and fun,
even for the beginner.The
Tiger Moth's design also
makes it an excellent 3D
aerobatic performer for
the experienced pilot:
inside loops, outside
loops, axial rolls,
inverted flight, knife
edge, stall turns,
hammerheads, and spins
are possible; it can roll
very quickly and is super
stable even when flying
upside down.This model
has been specified by
Nitrotek with a powerful
brushless motor, and a
2.4Ghz radio transmitter,
making it a perfect
choice for the enthuiast.
We have also upgraded the
charger from a standard
one, to a balanced
charger included in the
price. This makes
charging safer and better
for the battery.SpecsWing
span: 800mmLength:
670mmFlying weight:
400gBattery: Li-Po
11.1V-1000mAhPower: C2410
brushless motor Control:
4CH RC system4 servos25A
brushless ESCRange: 1000
feetFeatures4 CH Full RC
- Aileron, Elevator,
Rudder, ThrottleFull
aerobatic characteristics
Powerful brushless
motorExcellent
stabilityReady to Fly in
Minutes!Super
toughlightweightShock
Resistant FuselageStrong
WingsPre-installed
Electronics Suitable for
beginners and expertsOnly
required 8 AA batteries
for the transmitter to
start flyingThis plane is
described as RTF or ready
to fly, this means that
everything except
batteries for the
transmitter is included
in the box and that only
a few minor stages of
assembly remain, such as
attaching the wings and
tailplane. These steps
should take around 30
minutes to complete.
MANUFACTURER: Guan'Li
Model: 4 CH 2.4G Tiger
Moth Radio Control
Brushless Biplane
(G408)
Availability: In Stock
£124.99
Available
-
Top Flite P-40E Warhawk
(A-TOPA0120) Now modeller
with even limited
building experience can
successfully create a
realistic,
high-performance version
of WWII's Flying Tiger.
Featuring Top Flite's
computer-designed,
interlocking Gold Edition
kit construction and
thorough and
photo-illustrated
instructions makes this
Warhawk so simple to
build. Computer-designed,
interlocking kit
construction features
precisely die-cut,
perfectly fitting
partsDetailed,
photo-illustrated manual
covers assembly step by
stepIncludes thirteen
separate precision-formed
parts cowl, canopy,
exhaust ports, landing
gear pods, carb intake
scoop and moreThree huge
full-colour decal sheets
reproduce the P-40E
markingsRequires 4~8
channel radio systems
with 5~8 servos
Specification:Wingspan:
1620mm (64")Weight:
4700gRadio System: 4-8
ChannelIC Motor.61-.91
Two Stroke MANUFACTURER:
TOP FLITE PRODUCT CODE:
A-TOPA0120
Availability: In Stock
£249.99
Available
-
Top Flite Supermarine
Spitfire MkIX 62"
(A-TOPA0140) Developed in
1942 to equalize the
threat of the German
Focke Wulf, the Spitfire
MkIX proved to be the key
factor in England's air
defense. Top Flite has
now brought the Spitfire
to life in a stunning R/C
kit. By combining the
Spitfire's rich combat
history with Gold Edition
assembly ease and
authenticity, Top Flite
has created a superb
reproduction of this most
celebrated aircraft.
Perfectly fitting,
CAD-engineered wood parts
ease building.A
precision-formed ABS
cowl, wing fairings and
exhaust stacks, along
with a clear canopy and
many other details,
supply impressive scale
realism.An elliptical
wing with Selig wing
section provides a
stable, forgiving
warbird flight
performance.An extensive
hardware package,
complete with wire
rod-in-tube pushrods
comes with the kit,
along with a
high-quality,
photo-illustrated manual
and full-size plans.
Specification:Wingspan:
1600mmWeight: 3860gRadio
System: 4-8 ChannelIC
Motor.61-.78 Two Stroke
MANUFACTURER: TOP FLITE
PRODUCT CODE: A-TOPA0140
Availability: In Stock
£199.99
Available
-
A very close to scale
model that fully captures
the lines of the original
– with a performance to
match! The tip ailerons
not only improve the roll
characteristics, but
look great too. Supplied
factory built from
lightweight,
hand-selected balsa and
ply components, then
covered in pre-printed
Oracover in a
characteristic 109E
scheme, together with
large, pre-painted
fibreglass cowl.Perfect
for a 600 class brushed
motor or, for optimum
performance, your choice
of brushless motor, 3S
3200~4000mAh Li-Po and
four channel radio system
with 4 micro servos with
40Amp ESC.Features:•
Factory built and covered
– almost ready to
fly.• Lightweight all
built-up balsa and ply
structure.• Pre-printed
109E camouflage film
covering.• Ideal for
KMS 2814/06 brushless
motors and four channel
radios with 40A ESC and 4
micro servos.• Minimum
final assembly time.•
Simple hand launch and
belly
land.SpecificationWingspan:
1220mmWeight:
1550gElectric Motor: 600-
8.4v or KMS 2814/06 B
less motor Manufacturer:
RipmaxModel: Bf-109 EP
600 ARTF (A-ARTF6462)
Availability: In Stock
£99.99
Available
-
And now for something
very different! The
unusual lines of the
HE162 are faithfully
recreated in highly
detailed moulded foam and
factory painted ready for
you to assemble! Offering
truly outstanding value
this model features
factory fitted servos,
fan assembly and a
brushless motor with a
perfectly matched
electronic speed
controller. Flight
performance is best
described as excellent,
with good speed and solid
handling that will
inspire all that fly her!
The accurate scale
appearance makes it a
real eye catcher at the
flying field. This highly
prefabricated ARTF model
only requires a few hours
simple assembly to
complete and is supplied
very comprehensive
instructions. A perfect
choice for the pilot who
craves originality and
appreciates the
staggering level of
performance and value on
offer.
SpecificationWingspan:
790mmLength: 988mmRadio
System: 4 Channel Tx & Rx
req.Electric Motor: 14L
In-Runner Brushless
(Inc.) Manufacturer:
RipmaxModel: A-STAD05A
Availability: In Stock
£119.99
Available
-
This exciting Grippen
ARTF ducted fan model is
supplied complete with
three 9 gram servos
pre-installed and is
Transmitter and Receiver
ready, which allows you
to head for the skies in
the shortest time!
Featuring a custom ducted
fan unit and
hi-performance brushless
motor and ESC, which
combine to provide plenty
of power for rolls,
loops and inverted
flight. The large delta
wing makes landings slow
and predictable. Simply
glue on the wings and
tail fin, connect the
pushrods to the elevons
and rudder, fit your
receiver and suitable
flight battery. Created
from lightweight but
extremely durable EPS
foam, the Grippen has
lots of moulded-in
detailing and is factory
painted to this exciting
scheme. Requires 4
channel transmitter and
receiver with
elevon/delta mixing
function. Supplied
complete with decals and
illustrated assembly
instructions, this
exciting model represents
remarkable value.
Specification Wingspan:
671mmLength: 1073mmRadio
System: 4 Channel Tx
w/Delta Mix & Rx
req.Electric Motor: 14L
In-Runner Brushless
(Inc.) Manufacturer:
RipmaxModel: StarMax JAS
39 Gripen EDF ARTF
(A-STAD02A)
Availability: In Stock
£119.99
Available
-
My Hobby Store is proud
to offer these fantastic
foam wing Thunder Tiger -
Warbirds. These kits will
need some further parts
before they are ready to
fly, but at these prices
they just can’t be
missed!Fly your own piece
of aviation history, own
one of these amazing
fighting legends of the
sky!With the distinctive
painted shark’s mouth,
the P-40 has always been
one of the
mostrecognizable single
engine fighters of WW2 as
wellas a rugged
dependable aircraft which
providedinvaluable
service to the allied war
effort.Capture the
history of WW2 in a RC
flying fighterat your
local field. Get in the
air and experienceThunder
Tiger’s replica of the
P-40 Flying
Tiger.Features:* Pre
painted wing and
fuselage* 3 blade
propeller* Two landing
gear designs* One piece
foam wing with aileron
control surfaces* Factory
pre painted
pilotSpecifications:*
Wing span: 863.6mm*
Length: 738mm* Wing area:
226.4 sq”* Weight: 500g
Availability: In Stock
£59.99
Available
-
Top Flite P-47D
Thunderbolt Gold Edition
(A-TOPA0135) Though it
may not have been
considered 'sleek', the
P-47D Thunderbolt was
nonetheless a durable,
dependable fighter during
WWII, with a reputation
for returning pilots home
alive. Top Flite has
brought this nostalgic
aircraft back to life
with an authentic 1/8
sport scale version of
the 'Bonnie' P-47D-23
Razorback. As with all
Top Flite Warbirds,
careful attention to
detail is evident
throughout and Gold
Edition kit engineering
means modellers will
enjoy building and flying
this faithful
reproduction of a vintage
warrior.
Computer-designed
interlocking parts allow
the P-47D to go together
quickly and
accuratelyPhoto-illustrated
instructions and
full-size, rolled plans
help the assembly process
go smoothlyMany
precision-formed scale
parts add to the
authenticity of the
plane's appearanceStable,
forgiving flight
performance
Specification:Wingspan:
1600mm (63")Weight:
4760gIC Motor.61-.91 Two
Stroke MANUFACTURER: TOP
FLITE PRODUCT CODE:
A-TOPA0135
Availability: In Stock
£219.99
Available
-
With that beautiful
rounded fuselage, twin
engines and highly
tapered wing, there is
no doubt that this is the
famous Mosquito! By
utilising extensive laser
cutting and careful wood
selection, the Black
Horse Mosquito assembles
into a really lightweight
model.That weight,
combined with the chosen
wing section makes a very
docile model that is just
so easy to fly! The
unique and
super-lightweight GRP
cowlings/nacelles can be
installed and removed in
less than a minute,
making easy access to
your motors and speed
controllers. We recommend
KMS Quantum 2814/06 (x2)
& KMS Sentry 40
(x2).Flaps (4 sections)
are standard and
mechanical retracts are
included as well Although
the wings are removable
for transport, the model
is compact enough to be
transported in one piece
in many cars. Access to
the single Li-Po battery
(Impulse 3S 4000-4800mAh
recommended) is via an
easily removable nose
cone, which is
magnetically retained.
With all the small scale
details that are
included, the Black
Horse Mosquito becomes a
practical, yet
surprisingly scale-like
model of this famous
aircraft without any bad
flying attributes!
Specification:Wingspan:
1600mm (63in) Length:
1230mm (48.5in) Weight:
2500g (5.5lbs) Radio
System: 5/6 Channel with
6 Servos Electric Motor:
KMS Quantum 2814/09 (x2)
LiPo: Impulse 3S
4000-4800mAh Propeller
Range: 10 x 6, 10 x7
(x2) S/C Rec: KMS Sentry
30 (x2)
Availability: In Stock
£199.99
Available
-
Focke-Wulf FW-190 4 CH
Radio Control RC Scale
Brushed Fighter PlaneThe
Focke-Wulf Fw 190 Würger
was a German single-seat,
single-radial engine
fighter aircraft designed
by Kurt Tank in the late
1930s. It was used by the
Luftwaffe during the
Second World War, and is
up there with the
Spitfire and the P-51D
Mustang as one of the
best fighter planes of
the period.The Fw 190 had
a top speed of over 400
mph and could undertake
sorties of around 500
miles. To take down its
target the Focke was
equipped with two 13 mm
MG 131 machine guns with
475 rpg (rounds per gun),
and four 20 mm MG 151/20
E cannons with 250 rpg in
the wing root and 140 rpg
outboard.Once you've
opened the box, this
replica Fw 190 will be
ready for take-off in
only a few minutes,
everything you need to
fly (apart from 8 AA
batteries for the
transmitter) is included
in the package. Nitrotek
have specified this plane
with the 35Hz controller
and brushed motor
options, making it an
affordable entry level
outfit, ideal for
someone wanting to buy
their first plane.This
model is lightweight,
extremely tough, and the
fuselage has been
finished, carefully
emulating the details of
the original aeroplane.
This plane features
excellent stability and
awesome aerobatic
capabilities. An
experienced pilot will
have it performing inside
loops, outside loops,
axial rolls, inverted
flight, knife edge,
stall turns,
hammerheads, and even
spins!.SpecsWing span:
1010mmLength: 890mmFlying
Weight: 410gPower: 370
carbon brush motorSpeed
Controller: 25A speed
controllerServo:
3x10gBattery: 8.4 V
600mah Ni-MHControl: 4 CH
Multifunctional Radio
Tx/Rx Range: 500
feetFeatures4 CH Full RC
- Aileron, Elevator,
Rudder, ThrottleFull
aerobatic characteristics
Powerful brush
motorExcellent
stabilityReady to Fly in
Just Minutes!Super
toughlightweightShock
Resistant FuselageStrong
WingsPre-installed
Electronics Suitable for
beginners and expertsOnly
required 8 AA batteries
for the transmitter to
start flyingThis plane is
described as RTF or ready
to fly, this means that
everything except
batteries for the
transmitter is included
in the box and that only
a few minor stages of
assembly remain, such as
attaching the wings and
tailplane. These steps
should take around 30
minutes to complete.
Manufacturer:
Guan'LiModel: Focke-Wulf
FW-190 4 CH Radio Control
RC Scale Brushed Fighter
Plane (G604)
Availability: In Stock
£74.99
Available
-
Using the same
construction and covering
techniques as the
Spitfire, the brand new
Mustang 600 EP comes
completely factory
finished in printed film
with its light weight
laser cut balsa and ply
parts jig built for
you.Perfect for your
choice of 600 class
electric motor and 9.6v
Ni-Cad or Ni-M Hand four
channel radio system with
2 or 3 micro servos with
30Amp ESC.Despite being a
small semi-scale model,
there's plenty of printed
detail in the
covering!Features:•
Lightweight all built-up
structure• Pre-printed
invasion striped film
covering• Minimum final
assembly time• Simple
hand
launchSpecificationWingspan:
1200mmWeight:
1.4kgElectric Motor: 600
Manufacturer:
RipmaxModel: P-51 Mustang
EP 600 ARTF (A-ARTF6461)
Availability: In Stock
£94.99
Available
-
No warbird parkfly series
would be complete without
the Hellcat – so the
third model in this WWII
line up is the easily
recognised F6F. Again,
it is manufactured from
smooth lightweight
pre-painted foam and
supplied complete with a
high perfomance
ball-raced motor and
gearbox combination.
Features: • 90%
preassembled and ready
for flight in just a few
hours • Smooth,
lightweight foam
construction with plenty
of moulded scale detail
• All major components
supplied pre-painted with
decals for scale insignia
• On-board radio housed
in a compartment located
in front of the canopy
• Replica radial engine
is moulded in for added
realism without added
work Specification
Wingspan: 810mm
(31.9")Length: 630mm
(28")Radio System: 3
Channel with 2 Micro
Servos + 5A ESC (req)
Manufacturer: RipmaxModel
/ Part No: Great Planes
F6F Hellcat EP ARTF
(A-GPMA1159)
Availability: In Stock
£66.49
Available
-
Using the same airframe
as the standard E-DO F15
Eagle this model has the
extra advantage of 4-cell
Li-po power! With 4-cells
on tap this eagle
performs justice its full
sized counterpart, the
worlds fastest climbing
jet.Just an hour will
have this beautiful scale
model in the air from the
the time you open the
box. The injection
moulded EPS parts have
been mostly factory
assembled and all are
fully painted in an
aggressive US Air Force
colour scheme.The
fan/powerful out runner
brushless motor and ESC
are all pre-installed.
What's more... so are the
servos. The biggest job
you have to do is fit the
stickers, and there's a
very complete set of
them!Supplied without
undercarriage for hand
launching as standard,
but an optional fixed
undercarriage set is
available it
required.SpecificationWingspan:
740mm
(29.13")Length:
1100mm
(43.3")Weight: 870g
(24.6oz) ApproxRadio
System: 5x 9g Servos
(Inc.)Electric Motor:
4800KV (Inc.)LiPo: 3 –
4S 2200mAh 20C (Req.)S/C
Rec: 40 – 50A (Inc.)
Manufacturer: E-DoModel:
F-15E Eagle EP ARTF 3-4
Cell (A-ED025)
Availability: In Stock
£109.99
Available
-
Jaguar 3 CH Military J3
Piper Cub RC Warbird
AeroplaneThis Jaguar is a
Piper Cub based military
aeroplane, it is factory
finished in its United
States Air Force livery
and looks like an
authentic World War II,
Warbird.This is a great
beginners plane and comes
nearly fully assembled in
the box, all you have to
do is snap on a few final
parts, and you're off!
No tools are required.Its
two-stick three channel
transmitter allows you to
simply control up, down,
left and right, so even
a novice should have it
flying in minutes. This
plane has been configured
with brushed motor/35Hz
combination making it an
ideal, low cost, entry
level option for someone
wanting to sample the
world of radio controlled
aeroplanes for the first
time.SpecsWing span:
955mmLength: 730mmWeight:
640g Battery: 8.4v-650mAh
NI-MHPower: 380 brushed
motor4 channel TX6
channel RX2*9g servo,
1*25A brush ESC Flying
weight:450gFeaturesFlying
time: approx. 15
minsFlying height:
approx. 300mRange:
500mMillitary USAF
LiveryCan take off from
the ground or hand
Manufacturer:
Guan'LiModel: Jaguar 3 CH
Military J3 Piper Cub RC
Warbird Aeroplane
(G401-1)
Availability: In Stock
£64.99
Available
-
One of the most instantly
recognisable jets of all
time, recreated by
Starmax, experts in EDF
technology. The F4
Phantom ARTF features a
super lightweight foam
airframe, with a host of
scale detail moulded-in.
Factory painted to great
effect in this realistic
scheme, this terrific
model can be made ready
for action with just a
few hours of enjoyable
assembly. Supplied
complete with a factory
fitted hi-performance fan
unit, brushless motor,
ESC, and 3 x nine gram
servos. Simply add a
suitable receiver and
flight battery for head
turning performance that
won't fail to impress.
Supplied complete with
decals and easy-to-follow
assembly instructions.
SpecificationWingspan:
542mmLength: 788mmRadio
System: 4 Channel Tx & Rx
req.Electric Motor: 14L
In-Runner Brushless
(Inc.) Manufacturer:
RipmaxModel: A-STAD07A
Availability: In Stock
£119.99
Available
-
Messerschmitt T-109 4 CH
Radio Control RC Scale
Brushed Fighter PlaneThe
T-109, otherwise known
as the Messerschmitt Bf
109Z, is a heavy fighter
which was designed by
joining two Bf 109
(Me-109) fighters
together. The T-109 was
the result, on paper at
least it was a single
seater with the pilot
sitting in the left
fuselage. The T-109 would
have been heavily armed
with five 30 mm
cannons.Four versions of
this plane were planned,
but only one prototype
was ever built in
1942-43. Eventually the
project was cancelled due
to the arrival of the
Messerschmitt Me 262,
which was expected to
perfom better. So here is
your chance to fly the
fighter plane that never
was!Like many of our
planes this model is
virtually ready to fly
straight from the box,
all you'll need is 8 AA
batteries to power the
transmitter. Nitrotek
have specified this plane
with the 35Hz controller
and brushed motor
options, making it an
affordable entry level
outfit, ideal for
someone wanting to buy
their first plane.This
model is lightweight,
extremely tough, with a
reinforced fuselage and
wings, so it's as crash
resistant as possible.
The fuselage has been
factory finished, and
the details of original
design have been
carefully reproduced..
This plane features
excellent stability and
amazing aerobatic
capabilities. Once you've
become experienced, you
will have it performing
inside loops, outside
loops, axial rolls,
inverted flight, knife
edge, stall turns,
hammerheads, and even
spins!.SpecsWing span:
1200mmLength: 780mmFlying
Weight: 410gPower: twin
370 carbon brush
motorGearbox: 1:5.33 gear
w 1080 propellerSpeed
Controller: 40A ESCServo:
3x10gBattery: 9.6V 650mAh
Ni-MHControl: 4 CH
Multifunctional Radio
Tx/Rx Range: 500
feetFeatures4 CH Full RC
- Aileron, Elevator,
Rudder, ThrottleFull
aerobatic characteristics
Powerful brushed
motorExcellent
stabilityReady to Fly in
Just Minutes!Super
toughlightweightShock
Resistant FuselageStrong
WingsPre-installed
Electronics Suitable for
beginners and expertsOnly
required 8 AA batteries
for the transmitter to
start flyingThis plane is
described as RTF or ready
to fly, this means that
everything except
batteries for the
transmitter is included
in the box and that only
a few minor stages of
assembly remain, such as
attaching the wings and
tailplane. These steps
should take around 30
minutes to complete.
Manufacturer: Guan'Li
Model: Messerschmitt
T-109 4 CH Radio Control
RC Scale Brushed Fighter
Plane (G606)
Availability: In Stock
£89.99
Available
-
PRE-ORDER: This product
is currently out of
stock, new stock will be
arriving May 2010. The
menacing lines of the
F-35 are faithfully
reproduced in stunning
detail with this new high
performance ARTF EDF jet.
Supplied complete with
3000KV brushless motor,
high performance 70 mm
fan, dual axis 360°
vectored thrust unit,
ESC and all control
servos. But it doesn't
end there! Also includes
retracting undercarriage
and factory applied paint
scheme with authentic
decals. Simply add Tx,
Rx and your choice of 4S
2200mAh 20C Li-Po. It's a
steal!• 360° vectored
thrust unit• Retracting
undercarriage• All
servos included• High
performance motor and fan
includedSpecification:Wingspan:
800mmLength:
1200mmWeight:
1000gServos: 9 x 9g
(Inc.)Retracts:
IncludedLiPo Recommended:
O-IT4S1P250025ALiPo: 4S
2200mAh 20CVectored
Thrust: Dual AxisSpeed
Controller: 45A (Inc.)KV
RPM: 3000KVEDF Fan
Diameter: 70mmChannels: 7
Manufacturer: Ripmax -
FreewingModel / Part No.:
A-FR-1201C
Availability: In Stock
£189.99
Available
-
West Wings Spitfire 22/24
1:18 Kit - 625mm (A-WW04)
The West Wings Spitfire
is a great model that has
undoubted 'Spitfire'
presence and combines
that with superb flying
performance. That
characteristic
'Elliptical' wing is
faithfully recreated,
down to the curved upper
surface of the main wing
spar and the often
overlooked straight
centre section. The wing
fairings are carefully
constructed from a
combination of balsa
formers and curved paper.
The paper areas are
printed on the plan to
make this easy for you.
All wing components are
derived from printed
balsa sheets and the
supplied strip wood. The
fuselage is built up in
our familiar 'half shell'
construction over the
plan using printed sheets
and strip.
Specification:Wingspan:
625mmRubber: Rubber Power
MANUFACTURER: WEST WINGS
PRODUCT CODE: A-WW04
Availability: In Stock
£74.99
Available
-
The fierce Luftwaffe
Stuka dive-bomber struck
fear into the hearts of
Allied troops during WW2
– and now it returns to
the skies over your
flying field! From the
fibreglass cowl and wheel
pants to the underslung
flaps and ailerons on the
gull wing, this Great
Planes almost ready to
fly model remains true to
the full size fighter.
With an all wood
construction and
interlocking parts to
keep the airframe light
and strong, the model is
fully sheeted and
supplied pre-covered to
shave the final assembly
time to just 20-25 hours.
A wide range of engines
can be used to power the
Stuka – and it flies
just as well as it looks.
Large control surfaces,
separate aileron servos
and a long tail moment
add stability and
precision to your
dramatic dogfight
manoeuvres! Features: •
The wings and fuselage
are fully sheeted and
factory covered in an
intricate camouflage trim
scheme created with
Coverite Flat covering
• Pre-painted
fibreglass cowl and wheel
pants • Large
'greenhouse' style canopy
Requires four to seven
channel radio system with
5 to 7 servos.
Specification Wingspan:
1780mm (70")Length:
1400mm (55")IC
Motor. 61-.75 Two Stroke
/. 91 Four Stroke
Availability: In Stock
£279.99
Available
-
Great Planes' new Combat
Series of 1:12 scale
fighters are easy to
assemble, very
affordable and with their
compact sizes, sport
pilots will want to keep
one in their car for
spontaneous flying.
Features: • Each model
comes factory assembled
from lightweight ply and
balsa components •
Factory covered in high
quality, lightweight
film • Quick and easy
to assemble – combat
ready in just 7-10 hours
• Micro radio required
with two aileron servos
– one mounted in each
wing – to give crisp,
instant aileron control
•Supplied complete with
premium quality hardware
package, fibreglass
cowl, clear canopy and
decals Specification
Wingspan: 980mmLength:
864mmRadio System: 3
Channel with 4 ServosIC
Motor. 15-.25 Two Stroke
Manufacturer: RipmaxModel
/ Part No: Great Planes
Combat P-51 Mustang ARTF
(A-GPMA1475)
Availability: In Stock
£104.99
Available
-
Top Flite F4U Corsair
Gold Edition Revised
(A-TOPA0101) This is the
updated Sport Scale Model
of the famous gull-wing
fighter flown in WWII and
Korea. This kit now
accepts Topflite's
optional cockpit kit and
builds even easier.
flighter aircraft
appearance.
Computer-designed from
the ground up, its
interlocking parts
simplify assembly and
increase durability. The
kit features an injection
moulded ABS cowl and
vacuum-formed wing air
scoops (oil-coolers) for
authentic detail.
Requires a. 60-.80 2
stroke or. 91-1.20 4
stroke engine with
'Pitts' style muffler and
four to seven channel
radio with All balsa and
plywood easy to assemble
this kitABS cowl and air
scoopsCAD-drawn rolled
plansPushrods, hardware,
hinges, engine mount
includedPhoto illustrated
instruction manual
explains installation of
optional retracts and
flaps
Specification:Wingspan:
1575mmWeight:
3175-4310gRadio System:
4-7 ChannelIC
Motor.60-.80 two stroke
or. 91-1.20 four stroke
MANUFACTURER: TOP FLITE
PRODUCT CODE: A-TOPA0101
Availability: In Stock
£209.99
Available
-
With a Big Stik, you can
fly slow and easy or set
the sky on fire – and
do both after just 12-15
hours of assembly. It is
90% pre-built, with
interlocking wood
airframes that run
arrow-straight and
super-strong. The finish
offers the glossy good
looks and
puncture-resistant
strength of MonoKote with
the traditional 'Maltese
Cross' markings. A high
wing design and massive
wing areas make them
stable and easy to
control – even at low
speeds. And with the dual
aileron servos, huge
control surfaces and
virtually symmetrical
airfoils, you can reach
the outer limits of 3D
manoeuvres. But the
biggest Big Stik benefit
is its performance!
Requires 4-5 channel R/C
with 5 servos.
Specification Wingspan:
1486mm
(58.5")Length:
1295mm (51/59")IC
Motor. 40-.51 Two Stroke
/. 60-.80 Four Stroke
Manufacturer: RipmaxModel
/ Part No: Great Planes
Big Stik 40 ARTF
(A-GPMA1220)
Availability: In Stock
£132.99
Available
-
With a Big Stik, you can
fly slow and easy or set
the sky on fire – and
do both after just 12-15
hours of assembly. Both
versions are 90%
pre-built, with
interlocking wood
airframes that run
arrow-straight and
super-strong. The finish
offers the glossy good
looks and
puncture-resistant
strength of MonoKote with
the traditional 'Maltese
Cross' markings. But the
biggest Big Stik benefit
is their performance! A
high wing design and
massive wing areas make
them stable and easy to
control – even at low
speeds. And with their
dual aileron servos,
huge control surfaces and
virtually symmetrical
airfoils, you can reach
the outer limits of 3D
manoeuvres. Requires 4-5
channel R/C with 5
servos.Specification
Wingspan: 1689mm
(66.5")Length:
1499mm (59")IC
Motor. 60-.91 Two Stroke
/. 91-1.20 Four Stroke
Manufacturer: RipmaxModel
/ Part No: Great Planes
Big Stik 60 ARTF
(A-GPMA1221)
Availability: In Stock
£142.49
Available
-
The single-engine Curtiss
P-40 Warhawk took its
maiden flight in 1938,
and its fierce reputation
continues to this day.
Used by many Allied
countries during WWII,
its "Warhawk"
nickname came courtesy of
the U.S. Army Air Corps.
After production ceased
in November, 1944, 13,
738 P-40s remained to
fight in the front lines
for the final months of
the war. This exceptional
Top Flite ARF comes
loaded with scale details
which will impress even
the most discriminating
warbird modelers. Gold
Edition ARF warbirds are
famous for their
authentic details, and
the Warhawk is no
exception. A realistic,
eye-catching cockpit is
just one of the notable
features ready for your
favorite pilot figure.
The painted fiberglass
cowl recreates the iconic
"shark's mouth"
design used by the Flying
Tigers. A painted
aluminum spinner also
comes standard. Top Flite
includes flat-finish
decals seen on real
WWII-era P-40 Warhawk
aircraft. Assembles in as
little as 15-20
hours.Built-up and
sheeted wood
construction, covered in
flat-finish
MonoKote.Highly detailed
cockpit.Painted
fiberglass cowl, exhaust
ports, landing gear pods
and aluminum spinner.
Product
Specification:Wingspan:
1640mm
(64.5")Length:
1395mm (55")Weight:
4.4 - 4.5kg (9.75 -
10lb)Servos: 7 - 8Radio
System: 5 CIC Engine. 60
-. 91 2-StrokeIC Engine.
90 - 1.20 4-StrokeWing
Loading: 95 - 98 g/dm²
(31 - 32 oz/ft²)Wing
Area: 46.6 dm² (722
in²) Manufacturer: Top
FliteModel / Part No:
P-40 Warhawk 60 ARTF
(A-TOPA0970)Product
Manual: Click here
Availability: In Stock
£374.99
Available
-
Great Planes' new Combat
Series of 1:12 scale
fighters are easy to
assemble, very
affordable and with their
compact sizes, sport
pilots will want to keep
one in their car for
spontaneous flying.
Product Features: •
Each model comes factory
assembled from
lightweight ply and balsa
components • Factory
covered in high quality,
lightweight film •
Quick and easy to
assemble – combat ready
in just 7-10 hours •
Micro radio required with
two aileron servos –
one mounted in each wing
– to give crisp,
instant aileron control
• Supplied complete
with premium quality
hardware package,
fibreglass cowl, clear
canopy and decals Product
Specification:Wingspan:
1100mm24237860mmRadio
System: 3 Channel with 4
micro servosIC Motor.
15-.25 Two Stroke
Manufacturer: RipmaxModel
/ Part No: Great Planes
Combat Corsair ARTF
(A-GPMA1470)
Availability: In Stock
£109.99
Available
-
Top Flite T-34B Mentor
1:5 Kit (A-TOPA0160) Take
flight with an American
military classic trainer!
For almost 50 years the
T-34 Mentor was a primary
trainer for new U.S. Air
Force and Navy pilots.
Though many full-size
Mentors still exist
today, there are few R/C
models of this plane
around. But Top Flite is
proud to announce the
unveiling of a 1/5 scale
replica of this legendary
trainer that performs as
realistically as it
looks. With its Gold
Edition engineering and
lots of scale touches,
this T-34 Mentor makes
for a proud addition to
your military model
hangar. The fuselage and
wings are fully sheeted
in 3/32" balsa for
added strength, while
the tail section is
sheeted in 1/16"
balsa for lighter weight.
The cowl and tail cone
are made of heavy-duty
ABS plastic for
durability. Selig 3086
and 3087 airfoils deliver
comforting stability for
smooth flight and basic
aerobatics. The large
canopy can be installed
to slide open and closed,
and can be enhanced with
a full cockpit kit.
Performance options
include operational flaps
and retractable landing
gear. Requires.61-.91 cu
in (10-15cc) 2-stroke or.
91-1.20cu in (15-20cc)
4-stroke engine, 4-6
channel radio with 5~9
servos
Specification:Wingspan:
2030mmLength:
1600mmWeight: 4.5-6.4kg
MANUFACTURER: TOP FLITE
PRODUCT CODE: A-TOPA0160
Availability: In Stock
£279.99
Available
-
Sometimes the best things
come in small
packages....the F-35 Mini
EDF is no exception! All
the usual Freewing scale
detailing is present and
correct! It Includes a
factory installed high
performance brushless
motor, ducted fan unit,
servos and ESC. Just add
your Tx, Rx and a 3S
1300mAh Li-Po and you're
good to go! With all this
power and performance on
offer at such a
remarkeable low price,
the only difficulty will
be choosing between the
two colour options.....or
why not have both!•
3900KV motor included•
Servos included• High
performance ESC
included• Factory
applied
schemeSpecificationWingspan:
590mmLength: 700mmWeight:
400gServos: 2 x 9g
(Inc.)LiPo Recommended:
O-IT3S1P160020ALiPo: 3S
1300mAh 15CSpeed
Controller: 25A (Inc.)KV
RPM: 3900KVEDF Fan
Diameter: 64mmChannels: 3
Manufacturer: Ripmax -
FreewingsModel / Part
No.: Freewing F-35 Mini
EDF ARTF (A-FR-7001C)
Availability: In Stock
£94.99
Available
-
Sometimes the best things
come in small
packages....the F-35 Mini
EDF is no exception! All
the usual Freewing scale
detailing is present and
correct! It Includes a
factory installed high
performance brushless
motor, ducted fan unit,
servos and ESC. Just add
your Tx, Rx and a 3S
1300mAh Li-Po and you're
good to go! With all this
power and performance on
offer at such a
remarkeable low price,
the only difficulty will
be choosing between the
two colour options.....or
why not have both!•
3900KV motor included•
Servos included• High
performance ESC
included• Factory
applied
schemeSpecificationWingspan:
590mmLength: 700mmWeight:
400gServos: 2 x 9g
(Inc.)LiPo Recommended:
O-IT3S1P160020ALiPo: 3S
1300mAh 15CSpeed
Controller: 25A (Inc.)KV
RPM: 3900KVEDF Fan
Diameter: 64mmChannels: 3
Manufacturer: Ripmax -
FreewingModel / Part No.:
Freewing F-35 Mini EDF
ARTF-US Flag (A-FR-7002C)
Availability: In Stock
£94.99
Available
-
The legendary F-15 Eagle
superbly modelled by the
EDF experts at Freewing.
With a host of scale
features including a
factory applied colour
scheme, crisp panel
lines and cockpit
detailing, the F-15 is
real treat for EDF jet
enthusiasts. Just add Tx,
Rx and a suitable Li-Po
flight pack• High
performance brushless
power• Factory fitted
servos•
Pre-paintedSpecificationWingspan:
740mmLength:
1100mmWeight:
680-720gServos: 5 x 9g
(Inc.)Speed Controller:
45A (Inc.)KV RPM:
3500KVEDF Fan Diameter:
64mmChannels: 4LiPo
Recommended:
O-IT4S1P250025ALiPo: 4S
2200mAh 20C Manufacturer:
Ripmax - FreewingModel /
Part No.: Freewing F-15
EDF ARTF-Advers(4 cell)
(A-FR-8002C)
Availability: In Stock
£139.99
Available
-
Electric Ducted Fan Jet!:
The straightforward
design of the L-39
fighter makes it an
excellent match for R/C
model reproduction.
ElectriFly's sport-scale
version combines extreme
brushless motor
performance with advanced
HyperFlow ducted fan
technology — or a
wide-open flight envelope
that all jet pilots will
enjoy. Magnet-secured
hatch covers make the
L-39's battery and ducted
fan compartments easily
accessible. Plenty of
room is available for
installing a wide range
of battery sizes. The
L-39’s smooth
AeroCell™ surface comes
already finished with a
military-style camouflage
trim. Decals are also
factory applied and
detachable display
magnetic armament is
included. The HyperFlow
ducted fan and Ammo
brushless motor
combination produces
impressive thrust and
speed. Without the cost
or complexity of many
ducted fan jets, the
L-39 is capable of
blistering speed without
sacrificing flight time.
It performs well
throughout the flight
envelope, on power and
off. When you can’t be
out performing rocketing
climbs and high-speed
passes, admire your L-39
on the included display
stand.
SpecificationWingspan: 25
in (635 mm)Length: 31 in
(780 mm)Weight: 17.5-18.5
oz (500-520 g)Radio
System: Micro Reciever,
3 Micro Servos, 25A
Brushless ESCElectric
Motor: HyperFlow Fan &
20-40-3500 Ammo Motor
(Included)LiPo:
910-1250mAh 11.1V LiPo
battery Manufacturer:
Great PlanesModel: Great
Planes L-39 Albatross EDF
EP ARTF (A-GPMA1869)
Availability: In Stock
£99.99
Available
-
One of the most popular
jets, and with good
reason! Purposeful lines,
stunning performance and
a simply amazing
specification make this
L-39 Albatross completely
irresistable. Factory
finished in the the
famous Breitling colours
and supplied complete
with a high performance
64mm ducted fan with a
perfectly matched 4300KV
brushless motor. Includes
factory fitted servos,
and ESC. All you need is
a suitable transmitter,
receiver and flight pack
(3S 1800mAh 15C
recommended). For
intermediate to advanced
pilots.• 4300KV
brushless motor
included• High
performance ESC
included• Factory
installed servos•
Famous Breitling
schemeSpecificationWingspan:
800mmLength: 960mmWeight:
650gServos: 4 x 9g
(Inc.)LiPo Recommended:
O-IT3S1P210020ALiPo: 3S
1800mAh 15CSpeed
Controller: 30A (Inc.)KV
RPM: 4300KVEDF Fan
Diameter: 64mmChannels: 4
Manufacturer: Ripmax -
FreewingsModel / Part No:
Freewing L-39 Albatros
EDF ARTF (A-FR-3001C)
Availability: In Stock
£94.99
Available
-
The iconic F6F Hellcat
accurately bought to life
in this delightful 980 mm
(38.5") span model.
Crafted from lightweight
and highly detailed foam,
the Freewing F6F Hellcat
comes complete with
factory fitted brushless
motor, ESC, scale three
blade propeller and four
pre-installed servos.
Supplied in this classic
Naval scheme, just add
Tx, Rx and a 3S 1300mAh
Li-Po.• Three blade
propeller• Factory
installed servos•
Authentic Naval
schemeSpecificationWingspan:
980mmLength: 800mmWeight:
620gServos: 4 x 9g
(Inc.)Speed Controller:
18A (Inc.)KV RPM:
1250KVLiPo Recommended:
O-IT3S1P160020ALiPo: 3S
1300mAh 15CChannels: 4
Manufacturer: Ripmax -
FreewingsModel / Part
No.:Freewing F6F Hellcat
EP ARTF (A-FR-4001C)
Availability: In Stock
£94.99
Available
-
PRE-ORDER: This product
is currently out of
stock, new stock will be
arriving May 2010. It's
all in the detail....and
no-one gives you more
high level scale detail
than Freewing! Accurately
moulded from robust EPS
foam, the stunning F-16
has an amazing
specification. It
includes a dual axis
360° vectored thrust
unit, factory fitted
servos for all flight
controls, high
performance brushless
motor, 70 mm fan, ESC,
and a superb factory
applied colour scheme
with accurate decals.
Simply add your choice of
Tx, Rx and 4S 2200mAh
20C Li-Po.• 360°
vectored thrust unit•
2750KV brushless motor•
Factory applied colour
scheme• ESC and servos
includedSpecificationWingspan:
800mmLength: 1150gWeight:
900gServos: 7 x 9g
(Inc.)Speed Controller:
45A (Inc.)LiPo
Recommended:
O-IT4S1P250025AKV RPM:
2750KVEDF Fan Diameter:
70mmLiPo: 4S 2200mAh
20CVectored Thrust: Dual
Axis Channels: 6
Manufacturer: Ripmax -
FreewingModel / Part No.:
A-FR-1102C
Availability: In Stock
£169.99
Available
-
The legendary F-15 Eagle
superbly modelled by the
EDF experts at Freewing.
With a host of scale
features including a
factory applied colour
scheme, crisp panel
lines and cockpit
detailing, the F-15 is
real treat for EDF jet
enthusiasts. Just add Tx,
Rx and a suitable Li-Po
flight pack. • High
performance brushless
power• Factory fitted
servos•
Pre-paintedSpecificationWingspan:
740mm (29")Length:
1100mm
(43.3")Weight: 680g
(24oz.)Servos: 4x 9g
(Inc.)Radio System: 4 Ch.
(Rec.)Electric Motor:
4300KV 14L Brushless
(Inc.)LiPo: 4S 2200mAh
20C (Req.)S/C Rec: ESC
(Inc) Manufacturer:
FreewingModel: F-15EDF
ARTF Blue(4 cell)
(A-FR-8003C)
Availability: In Stock
£139.99
Available
-
At Black Horse, we like
Trojans and this one is
the biggest of the three
sizes available. That
combination of impeccable
flying manners, simple
ground handling and a
dramatic colour scheme
are too hard to resist!
Bolt in a powerful 1.20
two stroke like the OS
120AX and you have the
right power for this
amazingly scale aircraft
to roar around the sky
with complete authority.
That scale dihedral angle
and tricycle
undercarriage layout make
her easy to operate from
small fields by offereing
a stable approach and
Carefully-jig built at
the factory by highly
skilled workers in
selected balsa and ply
wood, with all
components CNC laser cut
for complete accuracy.
You would be hard pressed
to build her better
yourself. When you factor
in the time and component
costs, together with the
genuine Oracover film,
the price starts to look
amazingly cheap for such
a large scale model.
Flaps are fitted as
standard, and a set of
scale air retracts are
also included. It doesn't
get more complete than
that!
Specification:Wingspan:
2000mm (78.4in) Length:
1620mm (63.78in) Weight:
5.4kg (11.38lbs) Servos:
10 Radio System: 7
Channel IC Motor: 1.20
2-stroke Petrol Engine:
26cc Manufacturer: Black
Horse Model / Part No:
T-28 Trojan 120 ARTF
(A-BH059)
Availability: In Stock
£349.99
Available
-
Black Horse T-28 Trojan
120 ARTF (A-BH059)At
Black Horse, we like
Trojans and this one is
the biggest of the three
sizes available. That
combination of impeccable
flying manners, simple
ground handling and a
dramatic colour scheme
are too hard to resist!
Bolt in a powerful 1.20
two stroke like the OS
120AX and you have the
right power for this
amazingly scale aircraft
to roar around the sky
with complete authority.
That scale dihedral angle
and tricycle
undercarriage layout make
her easy to operate from
small fields by offereing
a stable approach and
Carefully-jig built at
the factory by highly
skilled workers in
selected balsa and ply
wood, with all
components CNC laser cut
for complete accuracy.
You would be hard pressed
to build her better
yourself. When you factor
in the time and component
costs, together with the
genuine Oracover film,
the price starts to look
amazingly cheap for such
a large scale model.
Flaps are fitted as
standard, and a set of
scale air retracts are
also included. It doesn't
get more complete than
that! Black Horse T-28
Trojan 120 ARTF (A-BH059)
Specification Servos: 10
Radio System: 7 Channel
IC Motor: 1.20 2-stroke
Petrol Engine: 26cc
Length: 1620mm (63.78in)
Weight: 5.4kg (11.38lbs)
Wingspan: 2000mm (78.4in)
Manufacturer: RipmaxModel
/ Part No: Black Horse
T-28 Trojan 120 ARTF
Availability: In Stock
£328.99
Available
-
Based on one of the great
post-war piston engine
trainers, the compact
Trojan can be either
electric or IC powered.
Its compact size makes
her ideal for sneaking in
the car for a quick
flight on the way home
from work!With CNC cut
components - factory
built and expertly
covered - you can be sure
of an accurate model that
will fly well from day
one. Its all built-up
construction ensures
it’s both light and
strong. Perfect for
electric conversion with
a brushless motor and
Li-Po battery. Very
little work required to
complete - buy today and
fly next
weekend!Recommended EP
Conversion• Motor: KMS
Quantum 2814/08• ESC:
KMS Sentry 40• Battery:
Impulse 3S 2500mAh LiPo
Specification:Wingspan:
1, 250mm Radio System: 4
Channel with 5 mini
servos IC Engine. 25~.39
2 Stroke or Brushless
Electric Manufacturer:
Black Horse Model / Part
No: T-28 Trojan EP ARTF
(A-BH040)
Availability: In Stock
£124.99
Available
-
A favourite with
modellers for many years
and now the F4U Corsair
is available as an easy
flying ARF that is small
enough to fly in you
local park or sports
field. Manufactured from
smooth lightweight
pre-painted foam, the
Corsair's performance is
sprightly with the
supplied ball-raced motor
and gearbox combination.
Product features: • 90%
preassembled and ready
for flight in just a few
hours. • Smooth,
lightweight foam
construction with plenty
of moulded scale detail.
• All major components
supplied pre-painted with
decals for scale
insignia. • On-board
radio housed in a
compartment located in
front of the canopy. •
Replica radial engine is
moulded in for added
realism without added
work. Specification
Wingspan: 826mm
(32.5")Length: 686mm
(27")Radio System: 3
Channel – 2 micro
Servos 5A ESC required
Manufacturer: RipmaxModel
/ Part No: Great Planes
F4U Corsair EP ARTF
(A-GPMA1157)
Availability: In Stock
£54.99
Available
-
West Wings Hawker Hunter
EDF 1:14.5 Kit 707mm
(A-WW33) Re-creating the
most famous British jet
fighter of them all -
arguably one of the most
attractive jets ever
built - the West Wings
Hawker Hunter retains
that 'character' while
keeping the design as
close to scale as
possible. Flight
performance can be
'sedate' if you use a
good 480 class ferrite
motor and 8 cells, right
up to 'ballistic' with a
Quantum 380/14 brushless
motor and 3 Li-Po cells.
Recommended fan is the
Wemotec 480 MiniFan.
Designed for lightweight
micro R/C (and a pair of
wing servos that are no
more than 9mm thick) the
Hunter is not a
beginner's model, but
perfect for intermediate
and experienced pilots
that can handle small,
fast models.
Specification:Wingspan:
707mmElectric Motor:
480BB Brushed or KMS
Quantum 380/14Scale:
1:14:5 MANUFACTURER: WEST
WINGS PRODUCT CODE:
A-WW33
Availability: In Stock
£74.99
Available
-
With all the character of
the original, this
lightweight model comes
factory finished and
almost ready to fly -
with a powerful brushless
motor and electronic
speed controller
included. The performance
is nothing less than
breathtaking, but come
off the throttle and the
low-speed handling is a
joy. No nasty vices here!
Simple hand launch &
belly land for maximum
fly-anywhere fun! With a
surprisingly accurate
outline and incredibly
lightweight construction,
the Mustang requires
only the minimum of final
assembly and installation
of your choice of micro
radio. Its fully
aerobatic performance
means it is not suitable
for beginners but is
perfect for intermediate
and experienced pilots.
Features: • Almost
Ready to Fly• Durable,
Lightweight Foam
Construction• Highly
Detailed Finish•
Pre-Hinged Control
Surfaces• Factory
Fitted Canopy• Powerful
Brushless Motor & Speed
Controller Included•
Comprehensive Hardware
Pack Included
SpecificationWingspan:
795mmLength: 895mmWeight:
445g ApproxLiPo: 3S
1300-1800mAh
Manufacturer: Ripmax -
Flying LegendsModel /
Part No.: A-FLMS002
Availability: In Stock
£74.99
Available
-
Developed as a fighter,
the F7F Tigercat was
notable for its twin
engines, slim fuselage,
tricycle undercarriage
and shoulder mounted
wings. Fast, powerful
and well armed, the
Tigercat arrived in
service just too late to
see action in WW2,
consequently many orders
were cancelled,
resulting in a total of
only 364 being built –
6 still being airworthy
at the time of
writing.The ASM F7F is an
exciting replica of the
original. Its impressive
2, 090mm wingspan results
in a model that is big
enough to fly superbly,
with a low wing loading
for docile stall and
landing characteristics,
yet due to the three
piece wing, it breaks
down easily to fit into
most vehicles. Although
not a beginner's model,
the F7F is the ideal
intro into the world of
scale twins as its flying
performance is so good,
even if one engine stops
in flight.Due to ASM's
unique airframe design,
it is substantially
lighter than
traditionally built
examples, which all
translates into easier
flying, gentler landings
and better aerobatic
performance. The ASM F7F
Tigercat comes fully
built and covered,
leaving only final
assembly plus radio,
engine, and optional
retract installation.The
model can be finished
with working retract
doors and beautiful
aluminium frame
air-retracts (sold
separately) to achieve a
truly scale
appearance.(Note:
Prototype Shown in
Images)SpecificationWingspan:
2090mm (82")Electric
Motor: 2 x KMS 4120/06
(Optional)LiPo: 2 x
Impulse 5S 4000mAhS/C
Rec: 2 x KMS Sentry 60IC
Engine: 2 x. 53~.61
2-Stroke or 2x. 70~.90
4-Stroke Manufacturer:
RipmaxModel: ASM F7-F
Tigercat ARTF (A-ASM006)
Availability: In Stock
£359.99
Available
-
The Avro Lancaster is
probably the most famous
of all the British four
engine heavy bombers of
the war years and was
possibly the most
effective bomber of the
period. It became world
famous for its role in
one of the most audacious
raids of the war, the
attack against the Mohne,
Eder and Sorpe Dams on
the Ruhr by Lancasters
from 617 Squadron, this
being immortalised in the
1955 film of the raid,
entitled “The
Dambusters”.This superb
1/10th scale replica
comprises a fuselage with
an internal structure of
ply formers and carbon
fibre longerons, with
the outer skin being
moulded from tough ABS
plastic. Wings and tail
surfaces are all built up
and sheeted, using laser
cut ribs for accuracy,
prior to being sheeted
with best quality balsa,
following which they are
covered in film and the
final paint finish is
applied.To assist in both
transport and storage the
model breaks down into
manageable sections, the
tailplane halves being
removeable, the fuselage
separating into two
pieces and the wing into
three, with assembly at
the field taking just a
few minutes. With a
wingspan of a full ten
feet, the ASM Lancaster
is an imposing sight in
the air, and with the
relatively low wing
loading is an easy to fly
and very stable model.
The flaps are highly
effective, enabling the
model to fly into and out
of fairly restricted
runways, and the low
speed handling is
excellent, making take
off and landing simple.
Either two or four stroke
engines can be used, or
as an alternative,
modern electric power is
eminently suitable giving
the additional benefits
of lack of noise and
almost complete
reliability.Options
available include
retracting undercarriage,
spring loaded struts,
bomb door opening kit and
scale bomb load.
SpecificationWingspan:
3050mm (120")Length:
2032mm (80")Weight:
13kg (28.7lb)Servos: 17
(8x6kg, 2x3kg mini,
7xstd) - GPRadio System:
7 - 9 Ch.IC Engine. 40
2-Stroke, . 52-.56
4-Stroke x 4
Manufacturer:
RipmaxModel: ASM Avro
Lancaster ARTF (A-ASM011)
Availability: In Stock
£749.99
Available
-
Following the lead of the
very successful Hercules,
the new Advanced Scale
Models 1/10th scale B-17
Flying Fortress is the
second in the four
engined series of models
from this innovative
manufacturer. The full
size B-17 is one of the
all time classic military
aircraft and was made
famous during WW2, when
it was a common sight in
European skies.Designed
to suit either. 40-.46
two stroke or. 52-.56
four stroke engines, the
B-17 is equally suitable
for electric power, with
its light weight and
substantial wing area
making it a stable and
easy to fly scale
replica. Flaps are fitted
as standard and are very
effective, reducing both
take off and landing
distances, and lowering
the stalling speed,
meaning that the B-17 can
be flown at many sites
previously off limits to
large multi engine scale
models.Construction
utilises the proven ASM
system of a fuselage
consisting of ply formers
with carbon longerons,
this substructure being
clad in ABS plastic,
accurately simulating the
curvaceous shape of the
full sized aircraft.
Flying surfaces are of
conventional
construction, being
fully built up from high
quality balsa and ply,
and being completely
sheeted prior to covering
in film, which is then
painted to match the
finish on the fuselage
and the fibreglass engine
nacelles and
cowlings.With a superb
flying performance and
amazing presence in the
air, the ASM B-17 is the
ideal way to own and fly
your own large scale
multi engine bomber, and
to allow easy transport
and storage the model can
be broken down into
surprisingly small
components, the wing
being in three sections
whilst the two part
fuselage is simply bolted
together, and the
tailplane halves are also
removable.Options
available include
retracting undercarriage
and spring loaded
struts.SpecificationWingspan:
3050mm (120in)Weight:
11.3kg (25lbs)Servos: 12
(8 x 6Kg minimum, 4 x
std) – GPRadio System:
6-8 ChannelElectric
Motor: KMS Quantum
2826/05 x 4IC Engine. 40
2-Stroke, . 52-.56
4-Stroke x 4LiPo: Impulse
4S 4000mAh x 4S/C Rec:
KMS Optima 60 Opto x 4
Manufacturer:
RipmaxModel: ASM B-17G
Flying Fortress ARTF
(A-ASM010)
Availability: In Stock
£699.99
Available
-
With all the character of
the original, this
lightweight model comes
factory finished and
almost ready to fly -
with a powerful brushless
motor and electronic
speed controller
included. The performance
is nothing less than
breathtaking, but come
off the throttle and the
low-speed handling is a
joy. No nasty vices here!
Simple hand launch &
belly land for maximum
fly-anywhere fun! With
its distinctive
elliptical wing, the
Spitfire’s unique
silhouette helped it
achieve legendary status
during the Battle of
Britain. One of the
finest fighters of its
day, the streamlined
Spitfire was fast and
manoeuvrable - and so too
is this latest model in
the Flying Legends Mini
Scale Series. Supplied
Almost Ready To Fly, it
simply requires final
assembly and installation
of your choice of micro
radio. Like the Mustang,
it comes complete with
powerful brushless motor
and electronic speed
controller. Neat scale
touches include the
cannons and radio mast
which, together with the
panel line detail,
enhance the Spitfire’s
scale appearance. Simple
to hand launch, the
Spitfire has a very low
wing loading, making it
stable and controllable
at low speeds.
Features:• Almost Ready
to Fly• Durable,
Lightweight Foam
Construction• Highly
Detailed Finish•
Pre-Hinged Control
Surfaces• Factory
Fitted Canopy• Powerful
Brushless Motor & Speed
Controller Included•
Comprehensive Hardware
Pack Includes Propeller,
Spinner, Linkages,
Horns and More!
SpecificationWingspan:
900mmLength: 765mmWeight:
500g ApproxLiPo: 3S
1300-1800mAh
Manufacturer: Ripmax -
Flying LegendsModel /
Part No.: A-FLMS001
Availability: In Stock
£74.99
Available
-
Black Horse T-28 Trojan
60 ARTFThe Black Horse
T-28 Trojan 60 ARTF is a
larger version of the
Black Horse T-28 Trojan
has all balsa and ply
construction covered in
Oracover with a factory
painted fibreglass cowl
and fitted cockpit. This
is a big model - but
despite being over
51" (1, 300mm) in
length the weight is a
very reasonable 7lbs
(3.3Kg).Recommended EP
Conversion• Motor: KMS
Quantum 4120/06• ESC:
KMS Sentry 60• Battery:
Impulse 5S 4800mAh LiPo
Specification:Wingspan:
1, 630mm Radio System: 6
Channel with 7 Servos IC
Engine. 61 2 Stroke / 91
4 Stroke Manufacturer:
Black Horse Model / Part
No: T-28 Trojan 60 ARTF
(A-BH045)
Availability: In Stock
£144.99
Available
-
Probably one of the most
easily recognisable jet
aircraft ever produced,
the Bae Hawk is the
choice of the Royal Air
Force and numerous other
air forces for use as a
jet trainer, or in an
upgraded form, a
low-cost but extremely
competent combat
aircraftSupplied factory
painted in this simple
yet elegant black RAF
colour scheme, this
brilliant EDF model from
FlyFly is supplied
complete with a
hi-performance 92mm fan
unit suitable for use
with your choice of
either a B36 1800kv
brushless motor, which
is perfect for the sport
flyer, or the amazing
B36 1600kv motor for the
pilot who demands even
more power!Assembly of
the lightweight EPS
airframe can be completed
in the shortest time and
features moulded-in scale
detailing such as panel
lines, inspection
hatches etc.A fixed
undercarriage
manufactured from durable
and lightweight aluminium
with factory assembled
sprung oleo legs is
included, and for those
who want to further
enhance the Hawk's scale
appearance an optional
air-operated retract
system is also
available.At 1365mm span
(53.5'') the Hawk is a
large EDF model, and
features an easily
removable wing to ease
transportation and
storage.Supplied complete
with illustrated assembly
instructions, decals and
a comprehensive hardware
pack, this model
represents remarkable
value.
SpecificationWingspan:
1365mmLength:
1465mmHeight:
535mmWeight: 2030gServos:
5 x 9g, (+
Retracts)Radio System: 4
- 5 Ch (Req.)Electric
Motor: Brushless B36
Inrunner 1600/1800kvLiPo:
5S 3200mAh 20CS/C Rec:
60AWing Area: 29dm2
Manufacturer:
FlyFlyModel: Bae Hawk EP
DF ARTF(Black)
(A-FFD006B)
Availability: In Stock
£169.99
Available
-
A striking model of the
F-5E, designed by
Starmax to offer you
stunning flight
performance combined with
quick and easy assembly.
This quality ARTF model
is supplied complete with
4 x servos, 64mm
hi-performance fan
assembly, efficient
brushless motor and
matching electronic speed
controller all
pre-installed! With the
vast majority of the work
already done at the
factory, you'll be
heading for the skies in
no time! The F-5E will
delight any experienced
pilot as the efficient
computer enhanced wing
design aids slow speed
handling for easy
landings. Simply glue on
the wings, tail and fin,
connect the pushrods to
control surfaces and fit
your receiver and
suitable flight battery.
The F-5E is a stunning
model you will be proud
to own and fly! •
Accurate scale appearance
with great attention to
detailing• Computer
designed aerofoil section
for excellent flight
performance•
Comprehensive assembly
instructions included
SpecificationWingspan:
532mmLength: 939mmRadio
System: 4 Channel Tx & Rx
(Req.)Electric Motor: 14L
Brushless Inrunner
(Inc.)LiPo: 3s (11.1V)
1300mAh (Req.)S/C Rec:
25A Brushless (Inc.)
Manufacturer:
RipmaxModel:StarMax F-5E
(Tiger Meet) EDF ARTF
(A-STAD18B)
Availability: In Stock
£119.99
Available
-
The addition of the
futuristic F-35 JSF
completes the line-up of
brilliant EDF jets from
Starmax. The ultra-modern
lines of this awesome
aircraft have been
faithfully recreated from
super-lightweight EPS
foam, with a host of
scale detail moulded-in
and then factory painted
in a very realistic
scheme. Supplied complete
with a hi-performance fan
unit, quality brushless
motor, ESC, and 2
servos, the F-35 not
only looks fantastic,
but represents terrific
value too! Flight
performance is
spectacular, with a host
of power available that
enables the experienced
pilot to fully explore
the limits of the flight
envelope! Novice EDF
pilots will appreciate
the cleverly designed
wing section that permits
steady slow speed flight
for easy landings.
SpecificationWingspan:
608mmLength: 840mmRadio
System: 4 Channel Tx
w/Delta Mix & Rx
req.Electric Motor: 14L
In-Runner Brushless
(Inc.) Manufacturer:
RipmaxModel: StarMax F-35
JSF EDF ARTF (A-STAD04A)
Availability: In Stock
£119.99
Available
-
With its built-up
structure offering light
weight with plenty of
strength and the highly
detailed invasion striped
scheme factory printed
and applied for you,
there really can't be a
quicker way of getting a
semi-scale Spitfire into
the air!Even better than
that is the fact that
it's exclusively designed
for electric power... so
it's quiet and clean to
operate too. Perfect for
your choice of 600 class
electric motor and 9.6v
Ni-Cad or Ni-MH and four
channel radio system with
2 or 3 micro servos with
30Amp ESC.No
undercarriage or retracts
to worry about – simply
hand launch and belly
land.• Wooden built up
structure for light
weight with maximum
strength• Pre-printed
invasion striped film
covering• Fuselage top
hatch for easy battery
pack access• Launch
holes in wing
undersurface to aid hand
launchingSpecificationWingspan:
48" (1.2m)Weight:
1.45KgRadio System: 3~4
channelBuild Type:
ARTFSkill: Intermediate
Manufacturer:
RipmaxModel: Spitfire 600
EP ARTF
Availability: In Stock
£89.99
Available
-
My Hobby Store is proud
to offer these fantastic
foam wing Thunder Tiger -
Warbirds. These kits will
need some further parts
before they are ready to
fly, but at these prices
they just can’t be
missed!Fly your own piece
of aviation history, own
one of these amazing
fighting legends of the
sky!The Focke-Wulf Fw 190
Würger (“shrike”),
often called
Butcher-bird, was a
single-seat,
single-engine fighter
aircraft of
Germany’sLuftwaffe,
and one of the best
fighters of
itsgeneration. Used
extensively during the
SecondWorld War, over
20, 000 were
manufactured, including
around 6, 000
fighter-bomber
models.Features:* Factory
pre-painted*
Comprehensive hardware*
One piece foam wing*
Mullet blade prop* WWII
pilot
includedSpecifications:*
Wing span: 863mm* Length:
750mm* Wing area:
192.2sq.in* Weight: 500g
Availability: In Stock
£59.99
Available
-
My Hobby Store is proud
to offer these fantastic
foam wing Thunder Tiger -
Warbirds. These kits will
need some further parts
before they are ready to
fly, but at these prices
they just can’t be
missed!Fly your own piece
of aviation history, own
one of these amazing
fighting legends of the
sky!Pappy Boyington swore
the F4U Corsairwas the
best fighter ever
produced.Today, the
legacy lives on and the
Corsairfeatures authentic
US Navy decals,
killmarkings and panel
lines. Its
instantlyrecognizable
gull wing design
deliversexcellent flight
characteristics
andawesome
looks.Features:* The most
popular gull wing WWII
fighter* Pre-painted
fuselage and wing*
Standard aluminium
4-blade propeller and
prop hub* Two landing
gear design; fixed and
retracted* One piece gull
wing with aileron control
surfaceSpecifications:*
Wing span: 863.6mm*
Length: 731.6mm* Wing
area: 14.6dm2* Weight:
550g
Availability: In Stock
£59.99
Available
-
Extremely tough and
well-suited for
dive-bombing ground
targets, the USAAF P-47
"Jug" destroyed
over 7, 000 enemy
aircraft in the European
Theater alone. This
sport-scale model
captures the WWII
fighter's menacing looks
in a high-quality ARF
design -and lets you
quickly turn your
low-wing skills loose
with a fighting
legend.• Features
built-up and covered
balsa/ply main assemblies
(with factory-hinged
control surfaces) and
painted fiberglass parts.
• Includes fixed wire
landing gear and mounting
components for both glow
and electric power
options. This model's
colors are inspired by
those of the 353rd
Fighter Squadron, one of
the most highly decorated
fighter groups of WWII.
Included die-cut decals
recreate the markings of
ace Glenn Eagleston's
aircraft.Great Planes
includes laser cut parts
for easily mounting your
on-board gear, whether
you choose glow or
electric power
options.Accessing the
flight battery in an
electric set-up is as
simple as removing the
magnetic hatch -you don't
have to remove the wing!
Specification Wingspan:
1005 mm (39.5 in)Length:
865 mm (34 in)Weight:
1160-1275 g (41-45
oz)Radio System:
4-channnel radio w/4-5
servos (Req.)Electric
Motor: 1200kV Outrunner
Brushless (Req.)Wing
Area: 18.7 dm (290 sq
in)LiPo: 11.1V, 3200mAh
(Req.)S/C Rec: 45A
Brushless (Req.)IC
Engine. 25 engine
2-Stroke (Req.)Wing
Loading: 62-68 g/dm
(20.4-22.3 oz/ft)
Manufacturer: Great
PlanesModel: P-47
Thunderbolt. 25/EP ARTF
(A-GPMA1479)
Availability: In Stock
£134.99
Available
-
The world of 1/5th scale
warbirds has suddenly
become very affordable
with the launch of the
new, big, Black Horse
Corsair. At 90 inch span
this is a serious size
model, but by careful
use of laser cut, balsa
and ply components,
weight has been kept down
to an amazing 18 1/2lbs.
This low weight allows
the use of affordable
50cc engines that are
becoming so popular now.
Fit a 62cc engine an you
have real performance in
the vertical. The outline
has been kept as close to
scale as possible to keep
the classic look 'all
Corsair' as she grooves
around the sky in a
manner that only big
models like this can.
Black Horse made sure
that the gull wing angle
was correct as the easy
option was never a
consideration. Not only
are the multi-section
flaps true to the
original, there are air
operated, twist and turn
retracts included
complete with functioning
oleo legs. These are
items that are nearly
always a major additional
cost in many models of
this size, not so with
Black Horse, they're
there as standard!! For
easy of transpotation,
the individual wing sides
can be easily removed.
The whole model is
clothed in duarble
Oracover covering, so
she will retain her looks
for many years to come.
The use of Oracover means
that damaged covering is
easily and exactly
matched by a visit to
your local model shop.
Flying is so predictable
and easy that you could
even make her your first
warbird. The stall is
benign and she handles
predictably and stabiliy
at all speeds.
SpecificationWingspan:
2310mm (90.04in)Length:
1750mm (68.90in)Weight:
8.4kg (18.52lbs)Servos: 9
Servos (8kg min on
elevator/aileron)Radio
System: 6/7 ChannelIC
Engine: 50 -62cc Petrol
Manufacturer: RipmaxModel
/ Part No: Black Horse
Corsair 50/62cc ARTF
(A-BH064)
Availability: In Stock
£519.99
Available
-
Top Flite P-51D Mustang
60 (1:7) Kit 65"
(A-TOPA0110) The P-51D
was designed for new and
established scale
modelers—anyone who
doesn't have time to
create scale detail from
scratch. Its
computer-simplified
design brings the most
popular WWII fighter to
life with unparalleled
building ease and
authenticity.
Photo-illustrated manual
speeds hobbyists through
assembly, and includes
steps for optional
retract and flap
installation Molded ABS
half-cowl and 1-piece
radiator scoops, plus
precision-formed exhaust
ports and wing guns, add
detail without
work...clear canopy
includes molded-in relief
details Wings are fully
sheeted for additional
authenticity Optional
Conversion Kit converts
this well known P-51D
version to the earlier
P-51B "razor
back" "Just
about all kit
manufacturers produce
Mustangs, and while they
all have at least one
virtue...Top Flite has
managed to combine all
these features and more
into one neat (and
affordable)
package." — Radio
Control Modeler
Magasineand flaps
Specification:Wingspan:
1650mm (65")Weight:
4530gRadio System: 4-8
ChannelIC Motor.60-.90
Two Stroke MANUFACTURER:
TOP FLITE PRODUCT CODE:
A-TOPA0110
Availability: In Stock
£199.99
Available
-
Introduced in 1985, the
full-size Lancair ES
homebuilt kit enjoys a
very high rate of
successful customer
completion a reputation
shared by Great Planes
R/C models. This
easy-to-assemble ARF
duplicates the smooth
lines and curves of the
original aircraft in
strong, lightweight
fibreglass… expertly
capturing the original's
"racy" looks
and swift aerobatic
performance Features: •
Assembles in as little as
six hours • Includes a
perfectly matched Speed
400 motor with gearbox,
spinner, and propeller
• Wing panels remove
for easy transport, and
plug-in quickly and
easily for flight •
Clear canopy locks in
place with magnetic
power, but removes
effortlessly for quick
battery access
Recommended EP Setup •
Motor: Speed 400 Supplied
• ESC: Jeti JES350 Eco
• Battery: Impulse 3S
1450mAh LiPo
Specification Wingspan:
1090mmWeight: 735 –
905gRadio System: 4
Channel radio with 4
micro servos
Manufacturer: RipmaxModel
/ Part No: Great Planes
Lancair EP ARTF
(A-GPMA1165)
Availability: In Stock
£85.49
Available
-
Flight Ready in as little
as 30 minutes! With its
B2 bomber inspired
appearance and compact
dimensions, you'll be
able to make the most of
tiny flying fields and
fleeting free moments.
The new Mini Slinger
offers a lively
performance, so it's
ideal for intermediate
pilots and can be flight
ready in as little as 30
minutes. Supplied
complete with its 180
class motor already
installed and with
durable foam
construction, the Mini
Slinger features a twin
carbon rod wing joining
system and upswept ABS
winglets. The centre
section moulding has
plenty of room for your
ESC and on-board radio.
Specification Wingspan:
805mmWeight:
213~240gRadio System: 3-4
Channel Mixing Radio with
2 Sub-Micro Servos
Manufacturer: RipmaxModel
/ Part No: Great Planes
Mini Slinger EP ARTF
(A-GPMA1178)
Availability: In Stock
£34.99
Available
-
In early 1942, the
American Volunteer
Group's success over
China did wonders for
U.S. morale following
Pearl Harbor. The Flying
Tigers and their
shark-mouthed P-40
warhawks destroyed nearly
300 enemy aircraft while
losing only 21 of their
own. This sport-scale
P-40 ARF does the WWII
legend proud -with a
high-quality design and
the versatility to please
every low-wing pilot.
Great Planes includes a
fiberglass cowl and
lightweight, balsa/ply
main structures covered
in an attractive Flying
Tigers trim scheme. The
camouflage color scheme
is topped off with such
instantly identifiable
details as this
"Flying Tigers"
insignia -lending just
enough realism to turn
each flight into a WWII
adventure. You can
assemble this model for
belly landings or with
the fixed wire landing
gear provided. Warbird
models of this size are
typically foam or
plastic, but the P-40
Warhawk is all-wood. Its
construction quality and
performance are superb
-equal to any sport-scale
model in the popular
Great Planes lineup! The
P-40 Warhawk comes
covered in a trim scheme
that captures the
camouflage colors of the
WWII Allied fighter.
Decals shown are included
and die-cut for easy
application. For an
outstanding brushless
electric power system,
outfit the P-40 with a
1450kV out-runner
brushless motor, 45A
ESC, and 3200mAh LiPo
battery. Laser-cut parts
for installing a complete
brushless electric power
system are supplied.
Accessing electronics for
maintenance is as simple
as removing the wing. If
you prefer to fly using
glow power -as required
for AMA-sanctioned combat
contests -Great Planes
provides the mounting
materials needed to
install a 2-stroke. 25 cu
in (4 cc) engine. Enjoy
thrilling sport action or
cut your combat
competition's ribbon to
shreds! Specification
Wingspan: 39 in (985
mm)Length: 34.5 in
(875mm)Weight: 38-46 oz
(1080-1300 g)Radio
System: 4-channel radio
reqElectric Motor: 1450kV
out-runner brushless
motorBattery: 2000mAh
9.6V NiMH or 3200 11.1V
LiPo batteryS/C Rec: 45A
brushless ESCIC Engine:
2-stroke. 25 cu in (4
cc)Wing Loading: 23-27
oz/ft2 (69-84 g/dm2)Wing
Area: 242 in2 (15.6 dm2)
Manufacturer: RipmaxModel
/ Part No: Great Planes
P-40 Warhawk EP/GP ARTF
(A-GPMA1472)
Availability: In Stock
£113.99
Available
-
The latest exciting
addition to the FlyFly
range of high performance
EDF jets, the stunning
F-100 Super Sabre. This
larger than average EDF
has real presence in the
air, and offers the
experienced pilot
outstanding levels of
flight performance
combined with masses of
authentic scale detail.
Created from lightweight
moulded foam then factory
painted in this accurate
silver scheme the F-100
Super Sabre is a breeze
to assemble and is
supplied complete with a
high performance 90 mm
fan unit, fixed gear,
quality hardware pack and
full instructions.•
Outstanding flight
performance• 90 mm fan
unit included• Factory
painted• Quality
hardware pack
SpecificationWingspan:
1220mm
(70.9")Length:
1520mm (57.9")Radio
System: 3 - 5 Ch.
(Req.)Electric Motor: B36
Brushless (Recommended)
Manufacturer:
FlyflyModel: F-100 Super
Sabre EP DF ARTF
(A-FFD009 )
Availability: In Stock
£189.99
Available
-
One glance tells you that
Starmax have reproduced
the distinctive delta
lines of the Mirage 2000
to great effect. This
very sleek and
aerodynamic model is
powered by a factory
fitted hi-output fan
assembly matched to an
efficient brushless motor
and electronic speed
controller. 2 x nine gram
servos are installed,
ready to give positive
control from the pilots
inputs. This great value
model is moulded from
lightweight foam for the
lightest possible weight
whilst remaining
extremely durable, and
factory painted in this
exciting colour scheme.
Just glue on the flying
surfaces, connect the
pushrods to the controls,
and add a suitable
receiver and flight
battery! The computer
enhanced wing section
ensures handling
characteristics of the
Mirage are excellent
across a wide speed
range. This highly
prefabricated ARTF model
can be complete in just a
few hours and includes
authentic decals and
detailed assembly and
set-up instructions.
Requires 4 channel
transmitter with
delta/elevon mixing
function, or separate
on-board mixer.
SpecificationWingspan:
575mmLength: 830mmRadio
System: 4 Channel Tx
w/Delta Mix & Rx
req.Electric Motor: 14L
In-Runner Brushless
(Inc.) Manufacturer:
RipmaxModel: StarMax
Mirage 2000 EDF ARTF
(A-STAD09A)
Availability: In Stock
£119.99
Available
-
Top Flite Sea Fury Gold
Edition. 61-.91
(A-TOPA0155)In 1942,
Britain's Royal Air Force
saw the need for a good
long-range fighter... but
it was the Royal Navy
which picked up the Fury
and introduced it to
their Air Fleet in 1948.
Christened 'Sea Fury',
it proved a capable
warrior, and in 1949 set
a speed record flying
from London to Rome. No
surprise, then, that
the former warbird is
often seen today at such
events as the Reno Air
Races - which in 1999
featured no less than
eight Sea Fury
contenders.
CAD-engineered wood parts
interlock perfectly for
fast, easy
assemblyFiberglass cowl
and ABS detail parts add
impressive realismDual
aileron servos simplify
set-upSlow stall speed
and superior handling
throughout the rpm range
Specification:Wingspan:
1650mm (65")Weight:
4530gRadio System: 4-7
ChannelIC Motor.61-.91
Two Stroke MANUFACTURER:
TOP FLITE PRODUCT CODE:
A-TOPA0155
Availability: In Stock
£229.99
Available
-
Primary U.S. Army and
Navy trainer during WW2,
Boeing's PT-17 Stearman
enjoyed a thriving second
career as a crop duster.
Hundreds still fly today
in private hands. This
spectacular one quarter
scale ARF version form
Great Planes makes an
ideal first biplane
model... and assembles
easily in as little as
12-15 hours. Features:
• Features high quality
balsa, ply and
fibreglass construction
with MonoKote film
covering • Performs
loops, rolls, spins,
stall turns, inverted
flight and other crowd
pleasing scale aerobatics
• Rivet decals and easy
to install replica radial
engine add impressive
realism and the main
landing gear further
enhances this with its
scale shape • Spacious
radio compartment allows
easy installation of
on-board radio Requires 4
channel radio with 5
servos.
Specification:Wingspan:
1815mm and 1755mmLength:
1450mm (57")IC
Motor. 91-1.20 Two or
Four Stroke Manufacturer:
Great PlanesStock No:
Great Planes Stearman
(Military) ARTF
(A-GPMA1349)
Availability: In Stock
£357.00
Available
-
The Supermarine Spitfire
is a British single-seat
fighter plane used by the
RAF during WW2. It is
undoubtedly one of the
most famous aircraft ever
built. Its graceful lines
combined with outstanding
handling qualities to
produce a "dream
plane" extremely
fast, and in comparison
to contemporary types was
second to none.One of the
last remaining Spitfires
at an airshow in 2005The
Spitfire was produced in
greater numbers than any
other British war plane
and was used by many of
Britain's Allies. It has
an elliptical wing cross
section, which allowed
it to fly at higher
speeds than the Hurricane
and other fighters of the
time, which had a more
traditional wing
shape.Once you've opened
the box, this replica
Spitfire will be ready to
grace the skies in only a
few minutes, everything
you need to fly (apart
from 8 AA batteries for
the transmitter) is
included in the
package.This Spitfire is
lightweight, extremely
tough, and the fuselage
has been finished,
carefully emulating the
details of the original
aeroplane. This plane
features excellent
stability and awesome
aerobatic capabilities.
An experienced pilot will
have it performing inside
loops, outside loops,
axial rolls, inverted
flight, knife edge,
stall turns,
hammerheads, and even
spins are
possible!SpecsWing span:
870mm Length: 720mmFlying
weight: 390g (14
oz)Power: 370 carbon
brush motorSpeed
Controller: 25A speed
controllerServo:
3x10gBattery: 8.4 V
600mah Ni-MHControl: 4 CH
Multifunctional Radio
Tx/Rx Range: 1000
feetFeatures4 CH Full RC
- Aileron, Elevator,
Rudder, ThrottleFull
aerobatic characteristics
Powerful brush
motorExcellent
stabilityReady to Fly in
Just Minutes!Super
toughlightweightShock
Resistant FuselageStrong
WingsPre-installed
Electronics Suitable for
beginners and expertsOnly
required 8 AA batteries
for the transmitter to
start flyingThis plane is
described as RTF or ready
to fly, this means that
everything except
batteries for the
transmitter is included
in the box and that only
a few minor stages of
assembly remain, such as
attaching the wings and
tailplane. These steps
should take around 30
minutes to complete.
Manufacturer: Guan'Li
Availability: In Stock
£74.99
Available
-
Topping the extensive
range of EDF jets from
Freewing is the awesome
SU-34 EDF VT. This has to
be the best specified
electric jet in its
class! Features 2 x
3500KV brushless motors,
2 x 70 mm ducted fans, 2
x high performance ESCs,
2 x 180° vectored thrust
units, retracting
undercarriage and no less
than 11 factory installed
servos. As you might
expect, the performance
on offer is also
top-of-the-line, with
speed and maneuvrability
to satisfy even the most
demanding jet pilot.
Perfect for use with your
choice of Tx, Rx and 4S
3000mAh Li-Po flight
pack.• 2 x brushless
motors• 11 factory
fitted servos• 2 x
vectored thrust units•
Awesome
performanceSpecificationWingspan:
900mmLength:
1450mmWeight:
1500gServos: 11 x 9g
(Inc.)Retracts:
IncludedLiPo Recommended:
O-IT4S1P330025ALiPo: 4S
3000mAh 20CVectored
Thrust: Twin Single
AxisSpeed Controller: 2 x
45A (Inc.)KV RPM:
3500KVEDF Fan Diameter: 2
x 70mm Manufacturer:
Ripmax - FreewingModel /
Part No.: Freewing SU-34
EDF VT ARTF-Blu Camo
(A-FR-9002A)
Availability: In Stock
£259.99
Available
-
Semi scale model of the
famous german areoplane.
The fuselage is laser cut
ply and Balsa planked.
Fully build up wings with
laser cut ribs, extra
light with Flaps. Comes
with all the hardware and
decals.Length = 1400mm
Wing span = 2080mm Motor
size =. 45 -.60 2stroke
or. 60 -. 90 4stroke
Weight = 4500 grms
Availability: In Stock
£159.00
Denmark