Specification Wingspan: 78 in (1980 mm) Length: 74.5 in (1890 mm) Weight: 13-15 lb (5.9-6.8 kg) Electric Motor: 63-62-250k V out-runner brushless Required Channels: 4+ channel radio – Required Li Po: 33.3V – 44.4V 3200m Ah (Electric Option) Required S/C Rec: 100A brushless ESC (Electric Option) Required Petrol Engine: 1.9-2.6 cu in (32-43 cc) gasoline Required IC Engine: 4-stroke 1.8-2.1 cu in (30-34 cc) Required IC Engine: 2-stroke 1.6-1.8 cu in (26-30 cc) Required Wing Loading: 28-32 oz/in (84-97 g/dm) Wing Area: 1088 in (70.2 dm A popular competitor on the Unlimited Class circuit & at international air races, the Edge 540 is a world-class aircraft known for exceptional aerobatics & precision maneuvers. Great Planes has captured every detail of this spirited performer in a stunning replica that is a worthy addition to the Performance Series of high-quality R/C models that combine easy assembly with realistic flight! Designed to be both lightweight & durable. Capable of extreme aerobatics as well as precision maneuvers. Unparalleled quality in an ARF -plus genuine Great Planes brand hardware. Outstanding manufacturing, parts fit & prefabrication allow the Performance Series Edge 540 to be flight ready in about 20-25 hours. Composite landing gear evenly distributes landing stresses, with a flowing shape that enhances the plane's overall appearance. The rudder & each elevator half utilize independent servos for consistent yaw & pitch control. Servos can be mounted in the fuselage for a lightweight pull-pull setup, or in the tail for a shorter, more direct linkage. Each aileron is controlled by an individual servo. Short, direct linkages make roll control precise, positive, dependable & easy to set up. Large control surfaces & full deflection throws enable the Edge 540 to react quickly to 3D control inputs. Knife edge, high alpha, inverted, upright...these & any other extreme maneuvers you can think of are at your command with this exciting aerobat! The beautifully molded fiberglass cowl & wheel pants are expertly painted to match the trim scheme. Easy to see in any attitude, the Edge 540 trim scheme is simple yet attractive. Sheeted foam core construction gives the turtledeck exceptional strength while adding minimal weight. Three different options are available for powering your Edge 540: glow, gasoline or brushless electric. The highest recommended power option within the specified ranges for each will deliver exceptional 3D flight performance. Manufacturer: Ripmax Model: Great Planes 27% Edge 540 ARTF (A-GPMA1414) ...

Originally designed for the Army Air Corps, the B-25 was known world-wide as the most devastatingly effective medium-range bomber of its time. By the end of the war, nearly 10, 000 B-25s had been manufactured for use as bombers, naval anti-submarine patrols, Air Force reconnaissance platforms, air-to-ground attack/strafing asset & VIP transport. To date, it is the only military aircraft ever named for an individual. Interior detail like this would cost extra on any other ARF, but it’s a built-in bonus on the Top Flite B-25. It’s an “inside look” at wartime design that

Includes:: a deck, bulkhead, 4 ammo boxes — & a pivoting. 50 caliber machine gun. The B-25’s trademark split flaps are included & the functioning gear doors. Working flaps mean shorter takeoff rolls & lower landing speeds — & both are big advantages for small-field flying. If the vertical fins won’t clear your storage rack, there’s a simple answer: remove them. Remove two screws from each fin, & height & depth problems disappear! A scratch-built kit with this level of detail would require hundreds of hours of work, but you can have the Top Flite B-25 ARF mission-ready in a fraction of that time. Finishing is done, the ply engine nacelles are prebuilt & the nose compartment is ready to assemble. • The most detailed B-25 ARF ever — inside & out!•

Includes:: functional fiberglass gear doors, painted replica radial engines, . 50 machine guns & more.• Ready for first flights — or additional scaling out — after only 50 hours of easy assembly. Specification Wingspan: 88.5 in (2255 mm) Length: 70.5 in (1795 mm) Weight: 17-19 lb (7.7-8.6 kg) Radio System: 13 servos Channels: 8-channel radio IC Engine: 2x 2-stroke. 46-.50 cu in or 2x 4-stroke. 70 cu in Manufacturer: Great Planes Model: Great Planes B-25 Mitchell Bomber 46-70 ARTF (A-TOPA0980 )



...

With a Big Stik, you can fly slow & easy or set the sky on fire – & do both after just 12-15 hours of assembly. It is 90% pre-built, with interlocking wood airframes that run arrow-straight & super-strong. The finish offers the glossy good looks & puncture-resistant strength of Mono Kote with the traditional ' Maltese Cross' markings. A high wing design & massive wing areas make them stable & easy to control – even at low speeds. & with the dual aileron servos, huge control surfaces & virtually symmetrical airfoils, you can reach the outer limits of 3D manoeuvres. But the biggest Big Stik benefit is its performance! Requires 4-5 channel R/C with 5 servos.

Specification Wingspan: 1486mm (58.5") Length: 1295mm (51/59")IC Motor. 40-.51 Two Stroke /. 60-.80 Four Stroke Manufacturer: Ripmax Model / Part No: Great Planes Big Stik 40 ARTF (A-GPMA1220)

...

Power – Poise – Precision The Great Planes 27% CAP 232 ARTF has them all – & they're at your command after only 20-24 hours of easy assembly. Like the full-size World Aerobatic Competition winner, this model leaves contest judges looking for new words to praise its graceful aerobatics. Your friends at the local flying field? They'll be in absolute awe!

Features: • Expertly engineered for low weight & high performance • Excellent "step up" for pilots eager to try a large, 3D-capable model • Superior ARTF quality -complete with proven Great Planes brand hardware Specification Wingspan: 2, 005mm Length: 1, 995mm IC Engine: 1.5-1.8 Two Stroke / 1.8-2.14 Four Stroke

...

American Airlines Captain Matt Chapman spends his weekends thrilling crowds with the action-packed aerobatics of his colourful CAP 580. Now you can do the same at your own flying field with this sport scale ARF model of his famous aircraft
- officially licensed & available ONLY from Great Planes!
Features:• Flies well with a. 46-.61 Two stroke engine
- or go for a. 70 class four stroke for unlimited aerobatic potential • Large radio compartment provides plenty of room for effortless installation of your 4+ channel system's on-board components • Assembly takes as little as 15-20 hours• The built-up wooden airframe arrives expertly factory covered in Mono Kote &

Includes:: a painted pilot figure, nylon spinner, & complete Great Planes hardware package Specification: Wingspan: 1410mm (55.5") Length: 1335mm (52.5")IC Motor. 41-.61 Two Stroke /. 52-.70 Four Stroke Manufacturer: Ripmax Model: Great Planes CAP 580 Chapman – 50 ARTF (A-GPMA1280)




...

Exceptional quality. Fine scale detail. Fast, almost ready to fly assembly! Rarely does one model earn all three of those descriptions but the Great Planes Cessna 182 is no ordinary ARF. It only takes 15-20 hours to assemble, but is built even better than most kits. Skillfully designed structures come prebuilt of strong, lightweight woods. The generously sized radio compartment allows easy on board gear installation & scale detailing. Each wing has its own aileron servo – which shortens & simplifies linkages & speeds & strengthens response. The hardware installed is Great Planes' own, & the convenience parts – Hoerner-style wing tips, cowl, tail cone & wheel pants – are formed of long lasting fibreglass, not plastic. Most are pre-painted in 3 colours to match the trimcolour Mono Kote trim scheme – which accents the Skylane's sport-scale looks without requiring any workbench time. Airfoil shaped struts & supplied fairings enhance the Skylane's aerodynamic profile.

Specification Wingspan: 1665mm (65.5") Radio System: 4-5 Channel with 5 Servos IC Motor. 40-.51 Two Stroke /. 52-.80 Four Stroke Manufacturer: Ripmax Model / Part No: Great Planes Cessna 182 40 ARTF (A-GPMA1228)

...

The Cherokee ARF is a great step up from your basic trainer -and one of the few realistic sport-scale alternatives for low-wing flight training. Its fast 4-6 hour assembly & steady performance provide the right foundation for success, complemented by quality wood & fibreglass construction plus the freedom to choose between glow or electric power.• Ideal for everyday sport flying & aerobatics -perform loops, rolls, inverted flight, stall turns & more!• Bolt-on wing & tail simplify assembly & transport• Operate the included flaps with a 5-channel radio for even greater realism & flight control• Tricycle landing gear provides positive handling on grass or tarmac Manufacturer: Ripmax Model / Part No: Great Planes Cherokee 40 ARTF (A-GPMA1033) ...

Great Planes Christen Eagle 46 ARTF (A-GPMA1431) Like the hot rod, the Christen Eagle is an all-American creation. Self-made millionaire Frank Christensen designed it as an unlimited-class aerobat that pilots could build at home. It was an immediate hit with pilots & air show crowds — & this ARF promises to be just as popular. Its designed to deliver the same adrenaline-charged aerobatics as the original, as well as the amazing assembly ease Great Planes is famous for! Faster to attach — easier to remove! Unique interplane struts do away with clumsy brackets, tiny screws & wasted time. Just slide it into the bottom wing. Putting the top wing in place "traps" it in place with a fit that holds tight whether its upright, inverted or on knife-edge.
Features: Designed for fast-paced aerobatics & easy assembly. Captures the trademark " Eagle" trim scheme in bright Mono Kote colors!A great performer with glow engines or brushless power! Innovative interplane struts eliminate brackets & tiny screws, speeding assembly & teardown. Comes with a painted pilot figure already installed. Specification: Wingspan: Top
- 1080mm (42.5") Wingspan: Bottom
- 1015mm (40") Length: 1005mm (39.5") Weight: 2610
- 2830g (5.75
- 6.25lb) Servos: 2-3 Standard & 2-4 Micro Radio System: 4 Ch.IC Engine. 46
-. 55 2-Stroke IC Engine. 70
-. 72 4-Stroke






...