Art Tech Cessna 182 500 class electric trainer is what you need if you believe in the bigger the better!The new Art Tech Cessna 182 500 class electric trainer is our largest plane yet, complete with full livery and markings, the details go as far as to include wing support, wheel covers, radio aerials, a 3 bladed propellor and even the passenger seats! The Art Tech Cessna 182 comes in at 1030mm long and with its enormous wingspan of 1290mm, this is one of the most stable trainers out there, and includes fully functioning brake flaps and navigational LEDS on the wings and tail fin. The Art Tech Cessna 182 is made from EPO foam, so is tougher and more durable than most other 'foamy' models, meaning it will absorb the bumps and knocks of the training process without resulting in total disaster.A massive 11.1v 2400mah Li-Po flight pack provides the go to the powerful 500 class come fitted with a servo slow giving a brushless motor and 40a brushless ESC, hidden under the cowling, to drive the scale 3 bladed prop round. The controls are handled by a 5 channel 2.4GHz transmitter paired with a 2.4GHz receiver pre-installed into the model along with 6 servos to move the control surfaces of the model to ensure you have the best possible control at all times. The flaps even come fitted with a servo slow giving a more scale appearance. The box for this beast includes a Li-poly balance charger, the 8 'AA' dry cell batteries to power your transmitter are also included, and of course the obligatory instruction manual for whilst you wait for a fully charged flight pack. Manufacturer: Century UK Ltd.Model: Cessna 182 500 Class (Epo Complete) (1-CESSNA-500)
Enjoy the thrill of R/C model flying with this Ready-To-Fly semiscale Cessna 400. In a matter of minutes you can be ready to take off as all electronics are pre-installed at the factory and adjusted for ease of use.The Cessna is the ideal choice for beginners or scale enthusiasts alike. Pleasing on the eye, its gentle and forgiving flight characteristics are perfect for pilots to enjoy flying, while coming to terms with a completely new experience.Product Features:Ready-To-Fly with all electronics pre-installedPowerful brushless direct drive system25 amp brushless speed control4 channel F.M. proportional radio system11.1v 1250mAh Lipo battery90 minute auto peak detection chargerSteer-able nose wheel for greater control on the ground Product Sepcification:Radio: 4 Channel Servos: 8.4g, 1.5kg torque/0.12 sec Motor: Brushless motor Battery: 11.1v 1250mAh 10c Lipo ESC: 25amp Brushless Charger: Lipo 12v Wingspan: 960 mmLength: 762 mmWing Area: 15.3 dm²Weight: 430gIncludes FREE Reality Craft Trainer Simulator. Learn to fly without the expense of crash damage!TGP0030 Cessna EP RTF
Art-Tech Decathlon (ARTF) will cut through the air with grace and agility.The Art-Tech Decathlon (ARTF) is a lovely looking aircraft painted with the classic sun burst on the flying surfaces. With a trainer type high wing the Art-Tech Decathlon (ARTF) can be used as a beginner’s plane but with a few adjustments of the large control surfaces it can give a whole lot of fun for the more experienced pilots as well. Long flight times, easy to fly, good looking and bursting with get up and go, it’s time to find more room in your hanger. Specification:WingspanF970mm/38.2inLengthF770mm/30.3inWeightF580g/20.5 ozMotorF390 BrushedBatteryFNi-MH 9.6V, 1000mAhR/C SystemFETB41-2.4GHzESCF30A BrushedServoF9gx3Art-Tech Decathlon (ARTF) requires beginner skill levels. MANUFACTURER: Century UK Ltd / Art-TechModel: Art-Tech Decathlon (ARTF) (1-DECATH) TO SEE A VIDEO OF THIS PLANE IN ACTION CLICK HERE: Click Here
Following on from the Cessna 182, ST Models have now created this fabulous model of one of the all time favourite light aircraft, the Piper J-3 Cub. Moulded in impact resistant EPO foam and with a superb semi-scale shape, this new Cub can be assembled in minutes, thanks to the factory installation of the motor, ESC, 4-channel AFHSS 2.4gHz radio, 3 servos and cables. All you need is a receiver, transmitter and flight battery. From out of the box to in the air will be limited by how long it takes to charge a battery, assembly is that fast! Scale details include moulded surface features in the foam and a clever sprung undercarriage. The powerful, brushless outrunner motor and 10A ESC give spritely power and great endurance from the recommended low cost 950mAh Impulse Li-Po battery. Like all Cubs, this is not a model for beginners, but would make a good step up after a trainer. SpecificationWingspan: 1210mm (47.6in)Length: 835mm (32.9in)Weight: 840gServos: 3 x Micro (Inc)Radio System: ST 2.4GHz Tx & Rx (Included)Electric Motor: Brushless 1120kv Outrunner (Inc)LiPo: Impulse 3S 950/1330MahLi-Po Wing Loading: 39g/dm2Wing Area: 21.5dm2S/C Rec: 10A Brushless (Inc) Manufacturer: Ripmax - St ModelModel / Part No.: ST Model Piper Cub EP ARTF 2.4G (A-STM040A)
Top Flite Beech Bonanza (A-TOPA0305) Exceptionally detailed sport 1/5 scale kit that shares many of the features that inspired the original 40's timeless classic that boasted luxuries and long life well beyond the norm of the time. A true flyer's delight. Build your Top Flite Bonanza with the Model V35B V-tail or Model F33A straight tail- all parts for both configurations are included. CAD-engineered for nearly automatic parts alignment, an easy, impressive scale project for intermediate builders. Custom-designed Selig S8036 (root) and S8037 (tip) airfoils provide excellent stall resistance and superior handling throughout the speed range. Specification:Wingspan: 81 in (2060 mm)Length: 63.6 in (1615 mm)Weight: 11-13 lb (4990-5900 g)Radio System: 4-6 channel radio with 6-9 servos (Required)IC Engine: 2-stroke. 61-.91 cu in (10.0-15.0 cc)IC Engine: 4-stroke. 91-1.20 cu in (15.0-20.0 cc)Wing Area: 1040 in² (67.1 dm²) MANUFACTURER: TOP FLITE PRODUCT CODE: A-TOPA0305
Top Flite Cessna 182 81" (A-TOPA0300) First time giant-scale builders and experienced scale modelers alike will find the classic plane they want in the Cessna 182 Skylane. The massive, 81" span, precision-formed ABS parts and decals (for items even as tiny as door hinges) make it easy to add detail for judging. An impressive project that the average builder can complete - and a smooth, easy flyer that virtually any pilot can enjoy! 3D CAD-engineered constructionConcealed linkages, 'ABS cowl, tailcone, wheel spats and strut fairings ease the creation of a true-scale appearanceTwo-piece, pre-drilled aluminum main landing gear bolts from inside the fuselage to maintain perfect scale linesEngine can be completely concealed within the cowl using optional header and in-cowl mufflerMoulded-in 'bowls' with clear lenses make adding (optional) landing lights easy Specification:Wingspan: 2050mm (81")Weight: 540gRadio System: 4-6 ChannelIC Motor.61-.91 Two Stroke MANUFACTURER: TOP FLITE PRODUCT CODE: A-TOPA0300
4 CH Catalina RC 2.4G Brushless Electric Twin Power Sea Plane w/ FloatsThe Catalina was an American flying boat of the 1930s and 1940s, produced by Consolidated Aircraft. It was such a versatile aeroplane that it performed numerous functions during WWII, and was used by the Air Forces, Armies and Navies of many countries.Catalinas were used in anti-submarine warfare, patrol bombing, convoy escorts, search and rescue missions and cargo transport. It was the most successful aircraft of its kind and produced in greater numbers than any other flying boat. Some remained in military service until the 1980s and even today the Catalina continues to be used as an airtanker in some parts of the world.The Catalina has full four channel radio control allowing adjustment of the aileron, elevator, rudder, and throttle; it can even be steered when floating on the water. Yes, water! This model sea plane has been designed so that it can actually take off and land on water, the twin brushless motors it is powered with can send it soaring effortlessly from your local lake or pond, into the sky. With its wingspan of just over four and a half feet it really does look spectacular, see the video below!The design of this aeroplane does not make it as agile as some other models, but it can pull a loop from a shallow dive and looks fantastic doing a low flypast either over land or water. In any case the power of the twin brushless motors enables it to be flown in many conditions, even when it is windy.The Catalina is nearly ready to fly straight from the box, all the necessary glue and tools are included in the in the carton and you will have it flying in no more than a few minutes. All you'll need are 8 AA batteries for the transmitter.The Catalina has been specified by Nitrotek with a powerful brushless motor, and a 2.4Ghz radio transmitter, making it a perfect choice for the enthuiast. We have also upgraded the charger from a standard one, to a balanced charger included in the price. This makes charging safer and better for the battery.SpecsWing span: 1380mmLength: 880mm Flying Weight: 780g Battery: Li-po 11.1V-1500mAhPower: twin C2410 brushless motorsControl: 4CH RC system, 4 servos2 x 25A brushless ESCRange: 1000 feetFeatures4 CH Full RC - Aileron, Elevator, Rudder, ThrottleRudder can steer on ground and waterPowerful brushless motorExcellent stabilityReady to Fly in Just Minutes!Super toughlightweightShock Resistant FuselageStrong WingsPre-installed Electronics Suitable for beginners and expertsOnly required 8 AA batteries for the transmitter to start flyingThis plane is described as RTF or ready to fly, this means that everything except batteries for the transmitter is included in the box and that only a few minor stages of assembly remain, such as attaching the wings and tailplane. These steps should take around 30 minutes to complete. Manufacturer: Guan'LiModel: 4 CH Catalina RC 2.4G Brushless Electric Twin Power Sea Plane w/ Floats (G607)
A model based on one of the prettiest modern light aircraft in the world today. The ST Model Cessna 350 combines graceful elegance with spritely performance and forgiving manners. Those complex, curvy lines are accurately moulded in the tried and tested ST Model EPO moulding technique to give a 'ding' resistant finish combined with a smooth surface that readily accepts the stunning decal colours. The tinted canopy, wheel spats and fully sprung noseleg are the finishing touches that ST Model have become famous for. When you add in the amazing 'Fowler' type flaps and lights set, the Cessna 350 becomes an irresistable package that appeals to all levels of pilot skill beyond the basic trainer. Power comes courtesy of a 1320kv brushless, outrunner motor and an 30A ESC which are factory installed and ready to be hooked up to a 1600/1800mAh 3 cell Li-Po of your choice. There is a 5 channel, 2.4gHz AFHSS radio and four 9G servos fitted and ready to go. As the model requires no glue, just one screwdriver will have her ready to fly in 15 minutes. OK, adding the decals may take a little longer, but you might not want to wait!! Specification Wingspan: 1435mm (56.5in)Length: 970mm (38.2in)Weight: 980g (34.57oz)Servos: 4 x 9g (Included)Radio System: ST 2.4GHz Tx & Rx (Included)Electric Motor: Brushless Outrunner 1320kv(Inc)Wing Loading: 44g/dm2Wing Area: 22.3dm2 (346sq.in)S/C Rec: 30A (Included)LiPo: 3S Intellect 1600mAh 25C required Manufacturer: RipmaxModel /Part No: ST Model Cessna 350 ARTF 2.4G (A-STM080A)
Exceptional quality. Fine scale detail. Fast, almost ready to fly assembly! Rarely does one model earn all three of those descriptions but the Great Planes Cessna 182 is no ordinary ARF. It only takes 15-20 hours to assemble, but is built even better than most kits. Skillfully designed structures come prebuilt of strong, lightweight woods. The generously sized radio compartment allows easy on board gear installation and scale detailing. Each wing has its own aileron servo – which shortens and simplifies linkages and speeds and strengthens response. The hardware installed is Great Planes' own, and the convenience parts – Hoerner-style wing tips, cowl, tail cone and wheel pants – are formed of long lasting fibreglass, not plastic. Most are pre-painted in 3 colours to match the trimcolour MonoKote trim scheme – which accents the Skylane's sport-scale looks without requiring any workbench time. Airfoil shaped struts and supplied fairings enhance the Skylane's aerodynamic profile. Specification Wingspan: 1665mm (65.5")Radio System: 4-5 Channel with 5 Servos IC Motor. 40-.51 Two Stroke /. 52-.80 Four Stroke Manufacturer: RipmaxModel /Part No: Great Planes Cessna 182 40 ARTF (A-GPMA1228)
Produced in semi scale, this scale ABS model of the Cessna 177 is made using modern polymers and sophisticated moulding technologies. If you are looking for a durable sport scale plane then look no further. Features: Semi scale sport planeABS blow moulded fuselageMoulded main wingComprehensive hardware packSemi-symmetrical airfoil Specs: Wing Span: 1700mmLength: 1250mmWing Area: 682sq.inWeight: 3000gRec. Engine: PRO-61 Manufacturer: Thunder TigerModel: TT4595
A large Classic pre-decorated 3 Channel Aeroplane featuring proportional rudder, elevator and motor control. Outstanding performance for the real enthusiast.Wingspan: 860mm Length: 530mm Weight: 325g8.4v Ni-Cad 600 mAh Flight Battery & UK Mains Charger.Charging Time: 20-30 minutes for full charge.Flight Duration: Approximately 10 minutes.Charging Time: 30-60 minutes for full charge.Flight Duration: Approximately 10 minutes.3 Channel 35MHz Transmitter, Receiver and Instructions.8 x AA Alkaline Batteries required for Transmitter Manufacturer: JamaraModel: Cessna 182 (J007031)
Easy to assemble and fly pre-decorated polystyrene electric Aeroplane with particularly stable flight characteristics. Suitable for beginners with rudder and motor control.Wingspan: 550mm Length: 420mm Weight: 108g4.8v Ni-Cad180mAh Flight Battery.Charges direct from the Transmitter.Charging Time: 20-30 minutes for full charge.Flight Duration: Approximately 10 minutes.2 Channel 27MHz Transmitter, Receiver and Instructions.8 x AA Alkaline Batteries required for Transmitter. Manufacturer: JamaraModel: Cessna 182 Mini (J005223)
A fantastic full four function flyer with aileron, elevator, rudder and motor control, providing a natural progression from the smaller 2 Channel Jamara Trainers Wingspan: 1020mm Length: 750mm Weight: 610g 9.6v Ni-Cad 600 mAh Flight Battery4 Channel 35MHz TransmitterReceiver and Instructions 8 x AA Alkaline Batteries required for Transmitter Manufacturer: JamaraModel: Bellanca Decathlon 480 (J005795)
When it comes to producing innovative models, Black Horse are famed for their out-of-the-box thinking. This time they have created a real beauty! A stunning recreation of one of the fastest and most highly regarded experimental home built aircraft of all time. This Glasair features a host of scale features including fully functioning flaps, cockpit detailing, crystal clear canopy, crew figures, and working lights. Crafted from the lightest balsa and quality plywoods, then hand finished to this authentic scheme in smooth glossy Oracover, this model is the treat that scale ARTF fans have been waiting for. • Host of scale detailing• Working flaps and lights• Comprehensive pack of quality hardware• Minimal assembly time SpecificationWingspan: 1860mm (73.23in)Length: 1470mm (57.87in)Weight: 5.2kg (7.92lbs)Servos: 8 ServosRadio System: 6 ChannelIC Engine. 91 – 1.20 2 Stroke, 1.20-2.00 4 Stroke, 20cc Pet. Manufacturer: RipmaxModel /Part No: Black Horse Glasair 120 ARTF (A-BH074)
If you are looking for a Nitro powered trainer that doesn’t look like the box it came in, then the Ready trainer is the one for you. Featuring a fully blow moulded wing and fuselage, the Ready trainer benefits from high wing stability and ease of construction. With a comprehensive hardware set and eye catching decals, the Ready trainer really is the best choice entry level trainer. Features:ABS Blow moulded fuselageMoulded main wingHardware and decals included Specs:Wing Span: 1570mmLength: 1200mmWing Area: 605 sq.inWeight: 2800gRec.Engine: GP42/PRO46 Manufacturer: Thunder TigerModel: TT4591
Featuring the same blow moulded technique as the Ready Trainer; the Jupiter is a low wing, sleek fuselage aerobatic capable airplane. Features:Can be installed with 2 servos for aileron and flapron.Blow moulded fuselage Semi symmetrical airfoil Specs:Wing Span: 1570mmLength: 1200mmWing Area: 605sq.inWeight: 2800gRec.Engine: PRO-46 Manufacturer: Thunder TigerModel: TT4592
Produced in semi scale, this scale ABS model of the Beaver Experimental is made using modern polymers and sophisticated moulding technologies. If you are looking for a durable sport scale plane then look no further. Features:Semi scale sport planeABS blow moulded fuselageMoulded main wingComprehensive hardware packSemi-symmetrical airfoil Specs: Wing Span: 1570mmLength: 1200mmWing Area: 605sq.inWeight: 2800gRec. Engine: PRO-46 Manufacturer: Thunder TigerModel: TT4593
Black Horse ChipmunkThe Black Horse Chipmunk is one of the most recognisable and charismatic trainers of the last 40 years whether training RAF pilots or giving ATC youngsters their first flight.The BlackHorse Chipmunk re-captures that charisma in a good size model that the average club pilot can fly. She has a 64.5” span, and you’ve even got flaps for those really slow flypasts or short landings.It’s hand built from accurate laser cut parts and GRP mouldings to ensure absolute accuracy and when you add that dramatic RAF training colour scheme in durable Oracover it becomes really hard to resist!Recommended EP Conversion• Motor: KMS Quantum 4120/05• ESC: KMS Sentry 60• Battery: Impulse 4S 4000mAh LiPo Black Horse Chipmunk Specification:Wingspan: 1, 640mm Length: 1, 350mm Radio System: 5~6 Channel with 8 Servos Electric Motor: KMS Quantum 4120/05 IC Engine. 52~.61 2 Stroke /.70~.90 4 Stroke S/C Rec: KMS Sentry 60 LiPo: Impulse 4S 4000mAh
The Art Tech Wing Dragon 4 has a full compliment of 4 proportional channels allowing full control of the model, the model aircraft is able to perform a full range of aerobatic manoeuvres.The Art Tech Wing Dragon 4 comes supplied with a 9.6v 1000mah battery, but you can also use the 8.4v pack if you want to slow things down a little.The Art-Tech Wing Dragon is a novice to intermediates plane.Everything required to fly the Art Tech Wing Dragon 4 is included with the model and the model requires minimal final assembly. All Art Tech models have 35 MHz receivers and comply with CE standards.Specifications.Length: 860mm (34")Wing span: 1080mm (42")Weight: 510g (18oz)Average flight time: ten minutes Manufacturer: Century UK Ltd / Art TechModel: Art Tech 4Channel WingDragon4 (1-WINGDRA/4CH /)
The Art Tech SU-27 (1-SU27) is a fast and superior model aircraft that will excite you on every flight!The Art Tech SU-27 is the first ducted fan model to be developed by Art Tech. The Art Tech SU-27 is a dream to fly and powers through the sky with ease. With enough power to take of from short grass or tarmac you will have hours of fun flying this model. The Art Tech SU-27 comes complete with battery, charger and all radio installed and is ready to fly as soon as the battery is charged and you have glued the wings on. Available with or without transmitter. Manufacturer: Century UK Ltd / Art TechModel: Art Tech SU-27 (1-SU27)
Length = 1560mm Wing span = 2120mm Motor size =. 60 -.90 2stroke or. 90 -.120 4stroke Weight = 4850 grms Stand off scale model with elegant lines and astonishing flying qualities. Duraflex fuselage, Foam wings, and comes with all the hardware and Decals.
Semi scale rc model of the famous twin engine Cessna. It was originally projected as a civillian aircraft, but later used by the USA Air force and also in the Vietnam war by the navy. The fuselage is wood construction with laser cut parts. The wings are balsa and vinyl covered foam core. The kit contains all the neccessary accessories with plans and building instructions in English. Wing span: 2200mm Length: 1160mm Weight: 6100grms Radio: 6ch Engine: 2 x. 46 two stroke upwards or 2 x. 65 four stroke upwards.