My Hobby Store | Arrowind

Price: £ - £

Sort By

Show

Arrowind

Available

Arrowind Brushless ESC-80A(SW)
(P-AWDFC8006SW)

Arrowind Brushless
ESC-80A(SW)
(P-AWDFC8006SW) Arrowind
ESCs are built to
extremely accurate
standards and very high
quality materials are
used throughout. Arrowind
are proud of that quality
and are happy to display
it to you by the use of
clear heatshrink outer
covering. That quality
results in predictable,
high performance time
after time.The setup of
each ESC can be made
using stick commands, or
in a much more
user-friendly way, with
the optional program
card. The LCD display on
the card is easy to read
and the program steps are
logical. The program card
has all the options
written on it to save you
always carrying the
instructions!Each ESC
comes pre-programmed for
Li-Po cells as part of
the default. All other
battery types can be used
by programming the exact
low voltage cut-off value
you require relative to
the type of battery. You
can of course course use
Li-pos at a different
cut-off value as well.By
selecting the correct
combination of
parameters, these ESCs
can be used for Aircraft,
gliders and helicopters
alike.Programmable
Features: Cut Off
Voltage: Low voltage
protection threshold,
User can set voltage
threshold according to
cell quantity within a
range of
00.0~49.9v.Default is
00.0V (Li-Po
automatic)Start Power
Position Percentage:
(00%~29%)Default is
00%Timing Mode:
Low/Mid/High/HighestDefault
is MiddleBrake Type:
Off/Soft/HardDefault is
Off (brake disabled)Start
Mode: Fast Start/Soft
Start/Very Soft
StartDefault is
FastCutoff Type:
Soft-Cut/Cut-OffDefault
is to reduce the output
power (Soft-Cut)Throttle
Curve Mode:
CURVE1/CURVE2/CURVE3Default
is curve1 (Linear)Motor
Rotation: Forward and
ReverseDefault is Forward
SpecificationWeight:60gMax
Continuous Amps:80AMax
Burst Amps:100ALi-XX Cell
Count:2-6

Availability: In Stock

£66.99

Available

Arrowind Brushless ESC-100A
Opto (P-AWDFC10006L)

Arrowind Brushless
ESC-100A Opto
(P-AWDFC10006L) Arrowind
ESCs are built to
extremely accurate
standards, and very high
quality materials are
used throughout to ensure
predictable, high
performance. Arrowind are
proud of that quality and
are happy to display it
by the use of clear
heatshrink outer
covering.The setup of
this ESC can be made
using stick commands, or
in a much more
user-friendly way, with
the optional program
card. The cards LCD
display is easy to read,
and the program steps are
logical; all the options
are written on the card
to save you always
carrying the
instructions!The ESC-100A
Opto comes pre-programmed
for Li-Po cells as part
of the default. All other
battery types can be used
by programming the exact
low voltage cut-off value
you require relative to
the type of battery. You
can of course course use
Li-pos at a different
cut-off value as well.By
selecting the correct
combination of
parameters, these ESCs
can be used for Aircraft,
gliders and helicopters
alike.Programmable
Features:Cut Off Voltage:
Low voltage protection
threshold, User can set
voltage threshold
according to cell
quantity within a range
of 0 - 49.9V.Default is
0V (Li-Po automatic)
Start Power Position
Percentage: (0 -
29%)Default is 0% Timing
Mode:
Low/Mid/High/HighestDefault
is Middle Brake Type:
Off/Soft/HardDefault is
Off (brake disabled)
Start Mode: Fast
Start/Soft Start/Very
Soft StartDefault is Fast
Cutoff Type:
Soft-Cut/Cut-OffDefault
is to reduce the output
power (Soft-Cut) Throttle
Curve Mode:
CURVE1/CURVE2/CURVE3Default
is curve1 (Linear) Motor
Rotation: Forward and
ReverseDefault is Forward
Specification: Weight:
160g Max. Continuous
Current: 100A Max. Burst
Current: 120A Li-XX cell
count: 2-6 NiCad / NiMH
cell count: 5-18 BEC:
Opto Programming: Yes
Dimensions: 70 x 55 x
20mm

Availability: In Stock

£97.99

Available

Arrowind Brushless ESC-HV80A
Opto (P-AWDFC8010HV)

Arrowind Brushless
ESC-HV80A Opto
(P-AWDFC8010HV) Arrowind
ESCs are built to
extremely accurate
standards and very high
quality materials are
used throughout. Arrowind
are proud of that quality
and are happy to display
it to you by the use of
clear heatshrink outer
covering. That quality
results in predictable,
high performance time
after time.The setup of
each ESC can be made
using stick commands, or
in a much more
user-friendly way, with
the optional program
card. The LCD display on
the card is easy to read
and the program steps are
logical. The program card
has all the options
written on it to save you
always carrying the
instructions!Each ESC
comes pre-programmed for
Li-Po cells as part of
the default. All other
battery types can be used
by programming the exact
low voltage cut-off value
you require relative to
the type of battery. You
can of course course use
Li-pos at a different
cut-off value as well.By
selecting the correct
combination of
parameters, these ESCs
can be used for Aircraft,
gliders and helicopters
alike.Programmable
Features:Cut Off Voltage:
Low voltage protection
threshold, User can set
voltage threshold
according to cell
quantity within a range
of 00.0~49.9v.Default is
00.0V (Li-Po automatic)
Start Power Position
Percentage:
(00%~29%)Default is 00%
Timing Mode:
Low/Mid/High/HighestDefault
is Middle Brake Type:
Off/Soft/Hard Default is
Off (brake disabled)
Start Mode: Fast
Start/Soft Start/Very
Soft StartDefault is Fast
Cutoff Type:
Soft-Cut/Cut-OffDefault
is to reduce the output
power (Soft-Cut) Throttle
Curve Mode:
CURVE1/CURVE2/CURVE3Default
is curve1 (Linear) Motor
Rotation: Forward and
ReverseDefault is Forward
Specification: Weight:
160g Max. Continuous
Current: 80A Max. Burst
Current: 100A Li-XX cell
count: 2-10 NiCad / NiMH
cell count: 5-36 BEC:
Opto Programming: Yes
Dimensions: 71 x 55 x
20mm

Availability: In Stock

£139.99

Home
Contributors
International Sites
- United Kingdom
- France
- Germany
- Netherlands
- Denmark
- Sweden
- Italy
- Spain
Account
Information

Filters

Contact Us

Information

My Account