An amazingly accurate scale model of one of the all-time favourite light aircraft of the 20th Century. Moulded in durable EPO foam to help re-create those compound fuselage curves as well as the characteristic ribbing on the ailerons, elevators and fowler flaps, this is a model to admire as well as fly! Just 20-30 minutes will have her assembled and ready to accept the battery of your choice. Supplied mostly pre-assembled at the factory, she comes complete with a 5 channel 2..4gHz AFHSS radio four servos (Elevator, ailerons, Rudder and Flaps), an powerful brushless motor and ESC as well as a full compliment of lights! There are two wing top lights, wing tip nav lights, a fin light and a powerful landing light, all controlled by a single electronic unit running off the flight battery. The brushless motor and ESC provide more than enough power for spritely scale flight as well as aerobatics! All this from a 3 cell 1600mAh Li-Po. When you factor in the aluminium main undercarriage and sprung, steerable nose leg (all with spats) it becomes amazing value for money. SpecificationWingspan: 1206mmLength: 960mmWeight: 950gServos: 4 x 9g (Included) Radio System: ST 2.4GHz Tx & Rx (Included)Electric Motor: Brushless (Included)Wing Loading: 44.4g/dm2Wing Area: 21.4dm2S/C Rec: 20A Brushless (Included)Recommended Propeller: 9 x 5 (Included)LiPo: Impulse 3S 1600/2100mah required Manufacturer: RipmaxModel /Part No: ST Model Cessna 182 EP ARTF 2.4G (A-STM020A)
Using a highly detailed, all-moulded ABS fuselage and factory built wooden wings and tail group, the Staggerwing manages to combine traditional and modern construction techniques that result in a light, strong model that requires very little work to complete. Supplied with a powerful 400 class cobalt motor, it requires 4 channel radio with suitable electronic speed controller and micro servos. Manufacturer: RipmaxModel /Part No: Wattage Beech Staggerwing (A-WATTSTAGG)
The ultimate model designed for the ultimate engine! The Flying Legends’ Gipsy Moth and the OS IL-300 Dia Star are the perfect complimentary combination and that is why the Gipsy Moth exists. This model has been designed to show off the IL-300 by choosing a subject that allows a simple yet visible installation and an aeroplane that flies in a way that the IL-300 can exploit. For those that find the IL-300 a little out of their reach, there is also provision to fit an FS200 Surpass as an alternative. At 2170mm span, this is a big model! Every effort has been made to incorporate as much scale detail as possible. With the designer being none other than scale legendary David Boddington, what else would you expect! The most dramatic and innovative feature is the fully-folding wing mechanism (a world first for an ARTF biplane!) No more de-rigging and disassembly for transport just fold the wings and slide her into your hatchback or estate car. SpecificationWingspan: 2170mm (85.43")Length: 1860mm (73.23")Weight: 8.5kg (18.5lbs) with engineIC Engine: OS IL-300 Dia Star or OS FS-200 SurpassManufacturer: Ripmax - Flying LegendsPart Number: A-FL001
West Wings Hawker Hart 1:18 Kit 632mm (A-WW09) This Hawker Hart is a builder's delight and requires more skill to build than most of our kits. Particular care must be taken in building and jigging the wings to ensure the correct flight performance. You really need to like building wings with this one. The beautiful fuselage shape is created by the standard method of formers and stringers etc. built over the plan to arrive at two half shells, which are then joined together. All tail surfaces are built up and the final structure covered in doped tissue. Specification:Wingspan: 622mmRubber: Rubber Power MANUFACTURER: WEST WINGS PRODUCT CODE: A-WW09
A Brilliant big Biplane completely pre-decorated, with polystyrene wings and tough flexible plastic fuselage that may be assembled in a matter of minutes Amazing aerobatic performance & detailed Pilot.Wingspan: 820mm Length: 540mmWeight: 525g Battery: 8.4v Ni-Cad 600mAh Flight Battery, 3 Channel 35MHz Transmitter, Receiver and Instructions 8 x AA Alkaline Batteries required for TransmitterManufacturer: JameraModel: Pitts Special (J005850)
Reactors have established a reputation for classic lines and a wide flight envelope, and the Reactor Biplane. 61 GP/EP ARF continues the tradition! It's based on the Reactor Bipe EP, but larger in size and with the capability for smooth sport maneuvers and 3D aerobatics with an outrunner brushless motor as well as a 2-stroke or 4-stroke glow engine. Lots of fiberglass parts add quality touches, and pre-hinged ailerons speed final assembly. It's the rock star of hybrid ARFs! The servo mount cutouts in the fuselage are sized for “mini” servos. Templates are included for enlarging them to accommodate standard size servos as well. The large, airfoiled tail surfaces allow for smooth sport flying all the way up to incredible aerobatics, before slowing down for soft 3-point landings. Quality construction is evident in the fiberglass cowl, wheel pants and upper wing mounting pylon. The pylon is glued in place to speed wing installation, with the servo leads inside for a cleaner, more aerodynamic look. •From sport to pattern to 3D — this beauty does them all.•Excellent performance with a glow engine or brushless electric power.•Sized and styled to rock! Manufacturer: Great PlanesModel: A-GPMA1023
Long considered the 'classic' biplane, the full size Super Stearman still thrills onlookers with its aerobatics. Now available as a high quality ARF from Great Planes, with all main sections featuring built-up balsa and ply construction, covered in MonoKote film and complimented by a painted fibreglass cowl, wheel spats and landing gear fairings. Other scale touches include a dummy radial engine, polished aluminium spinner and a pair of painted scale pilot figures. A plywood ring glued inside the cowl strengthens the nose assembly and eliminates visible screw heads. Four ailerons help give this Stearman 'super' agility, especially when each is powered by its own servo. Features: • The dual cockpits feature vacu-formed windscreens with painted frames, and come complete with a pair of scale pilot figures • A plywood carrying handle is included that makes for easy transport of the fuselage and interplane struts Requires a minimum of four channel R/C with 5 to 7 servos. Specification Wingspan: 1815mm and 1755mmLength: 1400mm (55")IC Motor. 61-.75 Two Stroke /. 91 Four Stroke Manufacturer: RipmaxModel /Part No: Great Planes Super Stearman ARTF (A-GPMA1350)
Push the sticks to the stops and the Ultimate Biplane will deliver spectacular aerobatic performance. Riveting rolling Harriers, tantalizingly slow torque rolls -with the Ultimate Biplane and your skills, the sky's no limit! Its compact size lets you push the limits, almost anytime and anywhere. Designed to deliver the best in brushless performance, it's also factory-built with the quality Great Planes is famed for. Light, straight wood structures. Painted fiberglass parts. And light, molded hardware for strong, split-second response. Specification Wingspan: 850 mm (33.5 in)Weight: 780-880 g (27.5-31 oz)Radio System: 4+ channel radio w/4 micro servos Manufacturer: RipmaxModel /Part No: Great Planes Ultimate EP ARTF (A-GPMA1546)