Great Planes P-51 Mustang. 46-70 ARTF (A-GPMA1205) Combat-tough & easy to assemble, this 56" span P-51 combines smooth sport flight habits with looks that evoke edge-of-your-seat warbird excitement. Its two-piece, balsa-sheeted foam wing has been covered in Mono Kote film, while the detailed cockpit

Includes:: an instrument panel, headrest & "ace" pilot figure. Performance is first-rate, too
- whether you install glow or electric power! Great Planes packs plenty of warbird realism into "sport scale". Check out the semi-scale trim scheme, created with Top Flite Mono Kote film
- & the detailed cockpit with instrument panel, headrest & installed pilot figure! The horizontal & vertical stabilizers are factory-hinged & bolt to the fuselage, aligning automatically. Assembly moves quickly
- you can be ready for your first dogfight in a matter of hours. The durable wing is constructed of balsa-sheeted foam, in two sections that assemble quickly & align automatically. It can also be taken apart for easy transport to your favorite flying field. Engineered for strong flight performance rather than precise scale accuracy, the Sport Scale Mustang makes an ideal step up from models such as the Great Planes Escapade or Cherokee. It goes where you point it, with aggressive looks but no bad habits. Specification: Wingspan: 1420mm (56") Length: 1270mm (50") Weight: 3.0
- 3.3kg (6.5
- 7.25 lb) Servos: 6 Radio System: 5 Ch.IC Engine. 40
-. 55 2-Stroke IC Engine. 70 4-Stroke Wing Area: 35 dm² (543 in²)







...

Accurately recreating the look of the 1930s-era naval military/sea rescue plane, the Great Planes PBY Catalina features a lightweight h&-crafted fibreglass fuselage, with traditionally constructed flying surfaces finished in durable film. Install twin brushless motors & you will be rewarded with an excellent power-to-weight ratio for exciting water takeoffs & landings. Supplied complete with a handy model cradle, generous hardware accessory pack & highly detailed photo-illustrated instructions. The PBY Catalina can be made flight-ready in as little as 10 hours. Perfect for 4 channel R/C with 4 mini servos. For super performance & great value we recommended installing twin KMS Quantum 2212/12 brushless motors, two KMS Sentry 18 brushless ESC, & an Impulse 3S 2100 -3200m A Li-Po battery. Specification Wingspan: 1360mm Length: 870mm (34.25") Radio System: 4 channel with 4 mini servos Manufacturer: Ripmax Model / Part No: Great Planes PBY Catalina EP ARTF (A-GPMA1154) ...

Just 105cm (41.5") across the wing tips, the Reactor 3D ARTF flies like a big plane but offers the "grab n' go" convenience of a park flyer. Generously sized for easier tracking & handling, it's designed for brushless power & spectacular 3D brilliance. Purpose-made hardware & a built-up balsa airframe provide a perfect balance of smooth, precision control & durable, lightweight construction. Ideal for intermediate pilots who want to master 3D skills
- & move beyond flat foamy looks & limits.
Features:• Factory-built & covered for minimum box-to-flight-line times!• Painted wheel pants & cowl enhance looks while eliminating extra work• Generous fuselage side area provides the lift needed for precision manoevres such as point rolls & knife-edge flight•

Includes:: a complete hardware package designed for maximum assembly convenience & absolute performance perfection• Designed for in-runner & out-runner brushless motors, without modification to mounts• For the perfect combination of performance, duration & excellent value we recommend a KMS Quantum 2820/05 brushless motor, Sentry 40 brushless ESC & an Impulse 3S 1450~2100m A Li-Po battery Specification Wingspan: 41.5 in (1055 mm) Length: 42 in (1065 mm) Weight: 24-27 oz (680-765 g) Radio System: 4+ channel micro radio (Req) Wing Loading: 9-10 oz sq/ft (27-31 g/dm) Manufacturer: Ripmax Model / Part No: Great Planes Reactor 3D EP (A-GPMA1540)



...

The Reactor has excelled with glow & electric power & now it really hits the "big time" -expanding to over 2m span with performance that's better than ever. At low speeds, the giant-scale Reactor flies solid & true. But for an all-out 3D machine, install a 50 cc petrol engine & increase the throws! • Excellent step up to giant-scale • Lightweight & durable to handle high-stress manoeuvres • Assembles in only 15-20 hours! • Large tail control surfaces increase the ability to fly demanding 3D aerobatics • Its two-piece, bolt-on wing allows easy transport to your favourite flying site Specification Wingspan: 84.5 in (2146 mm) Length: 85 in (2159 mm) Weight: 14-17 lb (6.35-7.71 kg) Radio System: 5-ch radio (6-ch rec); 7 Servos with 7.2 kg-cm Petrol Engine: 43 – 50cc IC Engine: 1.6 – 2.2 (2-Stroke) or 2.0 – 2.2 (4-Stroke) Wing Loading: 21-25 oz/in (63-77 g/dm) Wing Area: 1556 in (100.4 dm) ...

Accomplished pilots know that most planes designed for 3D maneuvers do not transition well into precision/pattern flying. But the Reactor Bipe is not like most planes. It's slightly larger & stronger than a park flyer, so it tracks better – especially in windy conditions. It also offers fresh perspectives in prefabrication which enhance assembly ease & overall quality of construction. With its good looks & broad flight envelope, the Reactor Bipe is one versatile performer that's also easy on the eyes! • Evolved from the original Reactor – one of the best 3D/precision airplanes ever engineered!• Ultra-strong, & capable of extreme maneuvers – without sacrificing the ability for precision flight.• Highly prefabricated with a dazzling, original trim scheme.• Loaded with finest top quality fiberglass parts & composite hardware. The battery compartment's roomy

Dimensions make it easy to access for quick battery changes. Quality lightweight materials – fiberglass wheel pants, landing gear, cowl & airfoil-shaped upper wing pylon. Not only is the Reactor Bipe expertly covered in metallic trim, it features an attractive, contemporary scheme. Die-cut decals are included for peel-&-press customization. While still being compact enough for easy transportation & spontaneous flying at a park or field, the Reactor Bipe is slightly larger & stronger than typical park flyers in its class. Specification Wingspan: 890 mm (35 in) Length: 1080 mm (43 in) Weight: 970-1085 g (34.2-38.2 oz) Radio System: 4-5 channels w/4 micro servos (Req.) Wing Loading: 25-28 g/dm² (8.3-9.3 oz/ft²) Wing Area: 38.7 dm² (600 in²) Manufacturer: Ripmax Model: Great Planes Reactor Bipe E-Performance 3D ARTF (A-GPMA1580)

...

It's true: bigger is better. The bold, sleek looks & pilot-friendly handling of the mid-size Revolver is now available in. 60 size. It's more impressive in the air, easier to track in the sky & less affected by wind – & that's not all. It's a great choice for everything from simple sport flying to air show aerobatics – & capable of bigger, better performance with either glow or electric power! Impressive size & traditional trim scheme are easy to track & see in most flight conditions. The fiberglass cowl, wheel pants & landing gear are painted to match the trim scheme. A built-up balsa/ply fuselage & a low parts count speed up final assembly time. The balsa-sheeted, foam-core, two-piece wing allows each wing panel to slide onto a joiner tube for transportation & storage ease. The Revolver performs equally well with glow or electric power, & either power option installs with virtually “foolproof” ease.

Specification Wingspan: 1780mm (70") Length: 1460mm (58.5") Weight: 3850-4190g (8.5-9.3lb) Servos: 5 Servos Radio System: 4 Channel (Req.)IC Engine. 61-.75 cu.in. 2-Stroke IC Engine. 81-.91 cu.in. 4-Stroke Manufacturer: Great Planes Model: A-GPMA1019

...

The Revolver from Great Planes is a real 'sports car' of an aerobatic model. Beautifully styled, this model will be much admired by fellow modellers. Once in the air it really takes centre stage. Whether it's equipped with a glow engine or brushless motor, the Revolver is capable of firing-off one crowd pleasing manoeuvre after another. The two piece plug-in wing is wire cut from foam & balsa sheeted, with the fuselage & tail surfaces featuring traditional all-wood construction & hand finished to this exciting scheme in glossy Monokote. Perfect for. 46~.55 two strokes or. 70 size four strokes. For the electric enthusiast we recommend a KMS Quantum 4120/05 brushless motor, KMS Sentry 60 brushless ESC & 4S 3200~4000m A Li-Po battery. Specification Wingspan:59 in (1500 mm) Length:48 in (1220 mm) Weight:6-7 lb (2720-3180 g) Radio System:4+ Channels with Mini Servos Electric Motor:800k V brushless out-runner motor Wing Loading:25-29 oz/ft (76-88 g/dm) Wing Area:563 in (36 dm)IC Engine:4-stroke. 70 cu in (11.5 cc) engine IC Engine:2-Stroke. 46-.55 cu in (7.5-9.0 cc) ...

Great Planes Rifle EP ARTF (A-GPMA1805) Electri Fly brings speed to the masses with fast, nimble Rifle — an envelope-pushing addition to your aircraft options that will definitely get attention at the flying field. The Rifle offers " White knuckle" speed, with predictable handling & tracking. A Lightweight, factory-finished composite construction, which is compact, fast & easy to assemble. The machined aluminum spinner shown here is only one example of the included, high-quality hardware & accessories that contribute to the Rifle’s sleek looks & superior performance. A single screw allows easy access to your on-board equipment. The fuselage has been engineered to accept widely available, economical electronics. " Live hinge" control surfaces maximize control effectiveness while minimizing deflection drag. Both the wing & the stabilizer bolt into place & align automatically. The Rifles fiberglass fuselage, wing & tail are factory-finished in a trim scheme that helps you stay oriented during flight. Take a fast, full-throttle thrill ride...then chill out, charge up & fly again! ...

A 1/4 scale model for glow or electric power. A favorite for recreation & cross-country travel, the full-size RV-4 is the most popular homebuilt in the world. This IMAA-legal, 1/4 scale model likewise earns high marks for versatility -- offering a realistic flight envelope whether you install a glow engine or electric brushless motor system. An ideal first 1/4 scale model -- & for learning how to fly with flaps. Assembles in as little as 20 hours, from factory-built & covered balsa/ply main structures & high-quality fiberglass parts.

Includes:: an aluminum spinner, durable formed aluminum landing gear & high-quality Great Planes brand hardware. The RV-4 ARF's cockpit

Includes:: a rollover bar & an instrument panel whose gauges appear realistically recessed -- an effect gained by placing the instrument panel decal behind the laser-cut dashboard. In addition to being an excellent first large-scale model, the RV-4 ARF is a fine choice for learning to add flaps to your control options. They aren't required for flight but can be used to slow the model for easier landings. Despite its 1/4 scale

Dimensions, the RV-4 ARF is also designed for convenient transport. Its wing halves detach easily for fitting the model into your vehicle. At the field, the halves plug quickly & securely onto aluminum joiner tubes. The removable radio compartment hatch allows for easy access when installing the wing bolts. Specification Wingspan: 70 in (1780 mm) Length: 63 in (1600 mm) Weight: 9.5-11.5 lb (4310-5217 g) Electric Motor: Equivalent to recommemded IC setup. Li Po: 6S1P 3200 m Ah Li Po S/C Rec: 80 Amp ESCIC Engine: 4-stroke. 91 (15 cc) IC Engine: 2-stroke. 61-.75 cu in (10-12 cc) Wing Loading: 21-26 oz/ft (64-78 g/dm) Wing Area: 1036 in (67 dm) Manufacturer: Ripmax Model / Part No: Great Planes RV-4 ARTF (A-GPMA1357)





...

Your next trip to the park or field can be more than just flying fun you can give chase to the Red Barons Flying Circus Electri Flys prebuilt, all-wood model of the S.E. 5a comes ready to take advantage of the latest breakthroughs in electric power for long flight times & dogfight-winning maneuverability.

Features: • Performs realistic WWI fighter aerobatics spins, sharp loops, Immelmanns & more • Assembles quickly from prebuilt structures of laser-cut, film-covered balsa ply •

Includes:: easy-to-install cabanes, struts & molded details for vintage warbird looks • KMS Quantum 2212/12 brushless motor, KMS Sentry 18 ESC & Impulse 3S 1300m A Li Po recommended Specification Wingspan: 34 in (864 mm) Length: 25.5 in (648 mm) Weight: 1.3-1.5 lb (595-680 g) Radio System: 4 Channel with 4 Mini Servos



...