The RC SYSTEM Twin Charger is the perfect choice to anyone who has an EP powered model. Especially designed to allow you to charge a NiMh race packs and Transmitter at the same time.(Transmitter must have charging port and be fitted with rechargeable batteries) Product Features:Input: 110-240v ~ 50/60HzOutput Battery: 4-7 Cells (4.8v-8.4v) – 950mAOutput TX: 8 Cells (9.6v) 120mA
The Ansmann Super Fast Delta-Peak ACX-1 Charger is perfect for charging your Tamiya radio control car battery packs. It will charge your 7.2 or 8.4 Volt batteries either from the mains or alternatively from a 12 volt source. This battery charger is electronically timer controlled and can charge Nicad or NiMH battery packs in approximately 30 minutes. Product Specification:Suitable for NiCd/NiMH battery packs 7.2-8.4v 1400 - 3000mAhMicropreoccessor controlled detection of battery charge statusAC (230v mains) or DC (12-16v) inputCharging current 3A Fast, 200mA SlowIntegrated safety timerAutomatically switches to trickle charge when pack is fully chargedCharging time max 30 min for 2000mAhFitted with standard plug Manufacturer: Ansmann RacingModel: 67P+ Super Fast Delta-Peak ACX-1 Charger
The Ansmann Racing Delta Pro 6 Mains Fast Charger is a radio control battery charger. Features: Charges 7.2 volt nicads or NiMH batteries, comes complete with a Tamiya plug. Charging current: 900mAh. Image shows EU model, our model comes with UK plug. Manufacturer: Ansmann RacingModel: Delta Pro 6 Mains Fast Charger (152100080)
The Ansmann Racing Powerjack 6-8 battery charger is for 6-8 cell rechargeable radio control battery packs. Product Specification:Charging time: 1 hour per 100 mAhCharge display: by red LEDInput voltage: 230 V~50 Hz +/-10%Output voltage: 7.2 - 9.6Nominal V DC Charging current: 180 - 140 mA Manufacturer: Ansmann RacingModel / Part No: 152100002 Powerjack 6-8 Charger
The Ansmann Racing xBase Deluxe Battery Charger is an affordable, computer-controlled universal quick charger that allows you to charge traditional NiCd, NiMh and Pb battery packs as well as the new rechargable Li-Ion and LiPo battery packs from a fixed mains supply, a car battery or another 11-15V DC power supply. It provides RC enthusiasts with a high degree of flexibility for charging batteries both indoors and outdoors. Product Specification: Operating Voltage: 230V AC 50hz 11-15V DCBattery types: 1-14 NiCd Cells 1-14 NiMh Cells 1-5 Li-Ion/LiPo Cells 1-6 Pb CellsCharging Current: 100mA - 5A (Max 50W)Trickle Charge (NiCD/NiMh): 100mAWeight: 590gDimensions (LxWxH): 119 x 102 x 85mm Audible signal and LCD indication for complete charge, wrong polarity, overheating abd wrong number of cells, automatic recognition of wrong polarity cells. Manufacturer: Ansmann RacingModel / Part No: Xbase Deluxe Charger (151100001)
Reactor 500 AC/DC Charger Lipo/NiMH/NiCd/Pb (UK 3-Pin)The HPI Reactor 500 is the ultimate charging companion for every RC hobbyist's toolbox!With universal voltage input, total compatibility with all available battery types (including Li-Ion, LiPo, LiFE and Pb), fast charging up to 5 amps, discharging, balancing, cycling, multiple profiles and microprocessor control, you won't have a need for any other charger on your pit table. Power Input: AC 11-18V or auto-switching DC 100-240VBattery Types Supported: Li-Po, Li-Ion & LiFe (1S-6S), Pb (2V-20V), NiCd & NiMH (1-15 cells)Up to 5 amp Charge RateBalance ChargingDischargerLiPo Storage CyclingPerfect for All RC HobbyistsWith the ability to charge a wide variety of battery types in various sizes and capabilities, the Reactor 500 is ideal for all car, airplane and boat RC enthusiasts. Microprocessor ControlledThe optimized microprocessor controller perfectly controls the charging, balancing and discharging, and prevents the overcharging of all types of batteries. The microprocessor disconnects the charge current and sounds and alarm if there is a malfunction. LiPo & Li-Ion Charger/BalancerSafe charging of lithium polymer (LiPo) or Lithium-Ion (Li-Ion) batteries from 1S up to 6S. Maximum charge voltage of 4.2V/cell for LiPo, 4.1V/cell for Li-Ion; up to 1C fast charge per cell.A123/LiFe Charger/BalancerCharge the latest LiFe batteries (up to 6S) with complete confidence. Maximum charge voltage of 3.6V/cell up to 4C fast charge per cell.NiMH & NiCd Battery ChargingCharge all current NiMH or older NiCd cells at up to 5 amps for safe and fast charging, from 1 to 15 cells.Pb Battery ChargingPb (lead-acid) batteries from 2-20V can be easily charged fro engine starters, etc.DischargerDischarge cells at a safe rate to maximize capacity and lengthen life. NiMH and NiCd discharging from 0.1 to 1 amp. Individual lithium battery cell discharging fro maximum safety. Lithium Battery BalancingThe internal lithium battery balancer eliminates the need for a separate cell balancer, allowing you to totally balance your LiPo, Li-Ion or LiFe batteries at any time.Storage ModeChoose this easy storage charge mode for confident long-term lithium battery storage.Extra-Safe ChargingSafety limits include: voltage, current, capacity, time and input power. Delta-peak sensitivity prevents too much voltage going into the battery; automatic cutoff when the battery reaches maximum capacity; maximum charge time can be set; lower input voltage level. Multiple Charging ProfilesSimplify charging my storing up to 5 battery pack profiles for charging different types of car/plane batteries, transmitter pack, receiver batteries and more. Easy Cycling of Battery PacksRevive battery packs for periodic maintenance or after a long storage. The charger safely charges the battery to full capacity, then slowly discharges it to a safe level up to 5 times. Ideal if you don't use your batteries regularly. Multiple Connectors IncludedPower inputs: Standard 3-pin laptop power supply connection fo