A pilot may own many planes, but there's always one that stands out as the all-time favorite. & that's what the Escapade was meant to be. Any pilot who's mastered a trainer can fly it with complete confidence -- & any pilot who's flown it once will want to fly it again. Easy handling & aerobatic performance are two good reasons. Assembly ease & incredible value -- & mounts for both glow & electric power -- make it a hands-down choice now & a take-along favorite anytime.• Assembles in just 4-6 hours -- & excels with 2-stroke, 4-stroke or brushless power! • Time-savers include prehinged control surfaces, an assembled fuel tank & bolt-on wing & tail surfaces, landing gear & wheel pants. • All control surfaces are prehinged.• Ailerons can be set up for single-servo simplicity or dual-servo authority with no modification. • Built-up airframe offers fast, bolt-together assembly & a striking Mono Kote trim scheme. • Other performance & appearance pluses: painted fiberglass wheel pants; a painted pilot bust; aluminum landing gear; easy-access Li Po battery hatch; steerable tailwheel assembly; & easy-to-install mounts for glow engines & brushless motors. Specification Wingspan: 1340 mm (52.5 in) Length: 1160 mm (46 in) Weight: 2, 270 – 2, 495 g (5.0-5.5 lb) Radio System: 4-channel radio w/3-5 servos (Req) Electric Motor: 800k V outrunner brushless (Rec) Li Po: 14.8V, 3200m Ah (Rec)S/C Rec: 60A brushless (Rec)IC Engine. 40-.55 2-Stroke or. 52-.70 4-Stroke (Req) Wing Loading: 73 – 80 g/dm (24-26 oz/ft) Wing Area: 31.2 dm (483 in) Manufacturer: Great Planes Model: Escapade. 40~.56 Low Wing Sport ARTF (A-GPMA1200) ...

Satisfy your urge for jet looks & speed, while enjoying "goes where you point it" stability & thrilling sport aerobatics. With its highly streamlined profile, the Evader looks fast even when sitting still. The highly visible trim scheme & tracking marks aid in following the model through high-speed maneuvers. The Evader can be h&-launched — or you can use the included 15-foot bungee for even easier launching. The Hyper Flow™ ducted fan unit with Ammo™ 24-45-3790 motor produces impressive thrust & speed — & provides "jet" excitement in a convenient size.* Compact, lightweight design.* Hyper Flow™ fan unit & Ammo™ brushless motor included.* 100+ mph straight-&-level speed! (At sea level with recommended electronics.) The magnetically secured hatch maintains the sleek lines of the fiberglass fuselage while allowing quick battery installation & removal.
MANUFACTURER: Great Planes Model / Part No: Evader EP ARTF (A-GPMA1800)
...

An authorised quarter scale replica of three times US & Canadian national champ Gene Soucy's aircraft. stunning looks & show-stopping ...

Performance equals fun
- & the Extra 330S EP ARF offers plenty of both! What's more, performance can be tailored to the pilot's
...

To prevent front-line fighter technology from falling into the wrong hands, the U.S. Department of Defense launched a project in the late 1970s that would produce less advanced aircraft for sale to our allies. Approximately $1.2 billion was spent by Northrop developing the F-20. But when policy changes during the Reagan administration left it competing directly for sales with the superior F-16, the project was abandoned. Just three prototypes had been built — & only one survives. Still, the F-20's speed & aggressive lines captured the hearts of military aircraft enthusiasts — & of like-minded R/C modelers, who'll find plenty of both available in this Electri Fly EDF.*

Includes:: Hyper Flow™ ducted fan unit with powerful Ammo™ 24-45-3790 inrunner brushless motor.* Strong, lightweight Aero Cell™ foam construction.* Fast, easy assembly. Aero Cell may be the finest material ever created for electric aircraft! This closed-cell foam delivers the benefits of costly composite construction in a more pilot-friendly, easy building form. Aero Cell offers the structural strength & rigidity of traditional structures without building...the weight advantages of foam without the brittleness & breakage...and a paintable surface that comes out of the box factory-finished. The Hyper Flow ducted fan unit was designed by our engineering department using flow analysis & state-of-the-art computer modeling to identify the parameters for high performance. The result is the ultimate ducted fan design. With the Hyper Flow & our efficient Ammo 24-45-3790 brushless motor, the F-20 is primed for hyper speeds! The Aero Cell™ surface comes already finished in high-visibility colors. Decals & removable magnetic wingtip missiles are included. When you can't be out performing rocketing climbs & high-speed passes, admire your F-20 on its included display stand! Optimized air intake & exhaust areas contribute more than exciting realism — they help draw maximum speed from the F-20's Hyper Flow ducted fan system. Assembly of the F-20 Tigershark can be completed in as little as 4 to 6 hours. As with all Electri Fly models, a complete package of high-quality hardware is included. Manufacturer: Great Planes Model / Part No: F-20 T'shark EP ARTF (A-GPMA1875)

...

No warbird parkfly series would be complete without the Hellcat – so the third model in this WWII line up is the easily recognised F6F. Again, it is manufactured from smooth lightweight pre-painted foam & supplied complete with a high perfomance ball-raced motor & gearbox combination.

Features: • 90% preassembled & ready for flight in just a few hours • Smooth, lightweight foam construction with plenty of moulded scale detail • All major components supplied pre-painted with decals for scale insignia • On-board radio housed in a compartment located in front of the canopy • Replica radial engine is moulded in for added realism without added work

Specification Wingspan: 810mm (31.9") Length: 630mm (28") Radio System: 3 Channel with 2 Micro Servos + 5A ESC (req) Manufacturer: Ripmax Model / Part No: Great Planes F6F Hellcat EP ARTF (A-GPMA1159)



...

Great Planes Falcon EP ARTF (A-GPMA1940) The plane that taught thousands of modelers to fly. Introduced in 1962, the Goldberg Falcon was a mainstay at the flying field — becoming the plane that took countless numbers of R/C pilots from the beginning stages into basic aerobatics. The Falcon has now been re-engineered with todays technology, including foam construction & brushless electric power. But the Falcons classic profile & gentle flight characteristics are just like you remember them...only better.
Features: Pro-Formance foam makes the airframe extremely strong & lightweight The Electri Fly™ Rim Fire™ 250 outrunner brushless motor is an economical choice for power An agile indoor flyer, the EP Falcon comes with a wing doubler that expands your flying options to include rigorous outdoor flying Rubber bands make attaching the wing simple & fast, & allow the wing to pop off in a crash, preventing excess damage Specification: Wingspan: 940mm (37") Length: 760mm (30") Weight: 240
- 285g (8.5
- 10 oz) Electric Motor: KMS 2205/21 (Rec.) Li Po: 7.4V 800m Ah Speed Controller: 8A Wing Area: 18.4 dm² (286 in²)


...

This is the glider you have been waiting for! It has the simplicity of a two channel trainer, the performance of a high-end kit & the affordability & ease of assembly that all the Flings offer. Start assembly in the morning & you'll be soaring in the afternoon! Supplied factory built & covered with a fibreglass & carbon fibre pod & boom fuselage. All hardware included, together with multi-position tow hook.

Features: • Factory assembled & covered • Strong, lightweight fibreglass & carbon fibre pod & boom fuselage • More than enough room for standard servos • Quick to assemble – flight ready in 1 to 2 hours! Specification Wingspan: 1, 995mm Weight: 565g Radio System: 2 Channel with Standard or Micro Servos Manufacturer: Ripmax Model: Great Planes Fling 2M Glider ARTF (A-GPMA1062)

...

Light & compact, the Fling ARF can be up & thermalling from the tiniest of fields after just a few hours of simple assembly.

...

The Fokker DR-1 will be forever tied to the famous Rittmeister Baron Manfred von Richthofen...the Red Baron. The leader of the Flying Circus had 80 confirmed victories, to make him the most successful pilot in World War I! This prebuilt R/C park flyer version takes advantage of breakthroughs in electric power for long flight times
- &, like its inspiration, dogfight-winning maneuverability.• Performs realistic WWI fighter aerobatics
- spins, rolls, loops, Immelmanns & more. • Perfectly suited for flying at a local field or nearby park. • Spanning under 30", the Fokker DR-1 can stay in one piece for transport in most vehicles. Built much like larger models, the EP Fokker DR-1's airframe is constructed of balsa & plywood materials. Its lightweight design & attention to detail stand this model apart from the rest. The prebuilt main structures are covered in high-quality film. Scale-shaped landing gear with an airfoiled center section, & lightweight scale wheels are included. To further speed & simplify assembly, the Fokker DR-1's cabanes & interplane struts come factory finished
- ready for easy installation & proper alignment. A complete package of high-quality hardware that's specifically designed for light weight & precise control response is included. A vacuum-formed replica radial engine, cowl, along with h&-crafted machine guns & other details enhance the Fokker DR-1's already impressive appearance.

Specification Wingspan: 745 mm (29.5 in) Length: 600 mm (23.5 in) Weight: 680 g (1.5 lb) Radio System: 4-channel radio w/4 micro servos (Req) Electric Motor: KMS Quantum 2122/12 Li Po: Impulse 3S 1300m Ah S/C Rec: KMS Sentry 18 ESCWing Loading: 10 oz/ft (30 g/dm) Wing Area: 20 dm (315 in) Manufacturer: Ripmax Model / Part No: Fokker DR1 WWI Triplane EP ARTF (A-GPMA1142)




...