The Wilesco Steam Engine- Oscillating has a Mirror polished & nickelplated boiler, with a diameter of 45mm, length 100mm, boiler capacity 135cm with water gauge glass. Boiler house, true to life, coloured & copperplated, with embossed brick type walls. Oscillating brass cylinder & piston, spring loaded safety valve, dome whistle, flywheel of 70mm diameter with grooved pulley. Finely painted metal. Base plate 140 x 200mm, Height including smoke stack 220mm, Weight 0, 8kg, Special gift box 210 x 150 x 150mm Manufacturer: Wilesco Model: Steam Engine
- Oscillating (D6)
...

The Wilesco D22 Steam Engine Twin Cylinder self starting operation with transmission. This live steam engine is a technically complete model which is impressive with its decorative silver/black finish. Brass boiler, highly polished & nickel plated, with a diameter of 2.6", length 6.5", boiler capacity 30.5in, sight glass as water level indicator, water draining valve, spring loaded safety valve, steam whistle with chain, pressure gauge, hand wheel, steam shut off valve, boiler housing in black, 2 footbridges with gallery rail & 2 ladders. The unit is situated on a raised metal base with two double action fixed brass cylinders, steam jet oilers, flywheel diameter 3.1", with large drive plate, forward & reverse movement, collecting tray for condensed water, fixed transmission with several drive wheels. Silver colored metal base. New Steam Exhaust! The steam is exhausted through the stack to make it look realistic
- picture is not accurate
- new artwork coming soon. Don't forget the Esbit Fuel & the Steam Oil! Base 11.4" x 13.8", height including smoke stack 12.6". Weight: 5 lbs. 10oz. Manufacturer: Wilesco Model: Steam Engine
- Twin Cylinder (D22)


...

The Wilesco Steam Engine Vertical with mirror polished & nickel plated boiler, it has a diameter of 2.6", height 6.9", boiler capacity 30.5 in, with single boiler flue of 0.8" diameter, built into the boiler to improve efficiency & for steam exhaust, with elongated water gauge glass. Boiler house true to life, colored & copper plated with embossed brick type walls. Footbridges with railings & ladder. Spring loaded safety valve, dome whistle, steam regulator, steam jet oiler, flywheel of 3.1" diameter, with large grooved pulley, finely painted bearing frame of cast aluminum. Vertical, reversible double-action brass cylinder with flywheel. Finely painted metal base plate. Don't forget the Esbit Fuel & the Steam Oil! Manufacturer: Wilesco Model: Steam Engine
- Vertical (D455) Base 5.7" x 8.1". Height, including smoke stack, 13". Weight: 2 lbs. 13oz.
...

The Wilesco D456 Steam Engine Black & Brass. A very attractive model steam engine from Wilesco which catches the eye with the decorative color combination of black-brass. Fully functional. The brass parts are coated with a clear varnish to prevent discoloration or oxidation. The technical details, The brass boiler has a 2.6" diameter, height 6.9", boiler capacity 30.5 in, flue, water level indicator, vertical, reversible double action brass cylinder, steam dome whistle, spring safety valve etc. Don't forget the Esbit Fuel & the Steam Oil! Brass base plate 5.7" x 8.1". Height including smoke stack 13", Weight: 2lbs 13oz. Manufacturer: Wilesco Model: Steam Engine
- Vertical Black & Brass (D456)
...

The Wilesco D49 2 Cyl-V-Marine Steam Engine with a mirror polished brass boiler, diameter of 65mm, height 100mm, capacity 300cm, with water gauge glass, spring loaded safety valve, steam whistle with chain. 2 double action brass cylinders with steam jet oilers in a V-shape, self starting automatic drive (allowing forward & reverse), infinitely variable. RC-connection can be joined to the reversing lever. Suitable for model boats of 800mm long. Operating time approx. 15 minutes. Don't forget the Esbit Fuel & the Steam Oil! Base plate for boiler 120 x 105 mm, height (incl. funnel) 240 mm, weight (incl. aggregate) approx. 0, 9kg ...

The Wilesco Steam Engine with Accessories. All units mounted on a finely painted metal base plate. Don't forget the Esbit Fuel & the Steam Oil! Base plate 13.4" x 16.5". Height including smoke stack 11.0", Weight 6lbs 10oz. Manufacturer: Wilesco Model: Steam Engine with Accessories (D161) ...

Mirror polished boiler, diameter 65 mm, length 160 mm, capacity 530 ccms. Brick type walls, two footbridges with railings & two ladders. Double acting reversible brass cylinder with flywheel, spring loaded safety valve, additional steam whistle with chain, pressure gauge, steam regulator, sturdy diecast piston rods & centrifugal governor. Manufacturer: Wilesco Model: Steam Engine
- With Pump (D21)
...

The Wilesco Steam Fire Engine is based on an original which was produced by Magirus in Germany at the beginning of the last century. The Fire engine is operated by the steam engine. It can be driven forward & reverse. The speed is regulated by using the speed control valve. Further
Details: Vertical mirror polished brass boiler with a diameter of 3.2"height 5.9"boiler capacity 27.5 inelongated gauge glass Single boiler flue with a diameter of. 8" built into the boiler to improve efficiency & for the escape of steam exhaust. Safety flue attachment. Vertical reversible double action brass cylinder. Flywheel with a diameter of 3.2", spring loaded safety valve, steam whistle with chain, steam regulator, gathering tray for condensed water, die cast wheels with solid rubber tires, wooden seats, fire bell. Two lacquered die cast lamps, steering wheel for the front wheels. Clutch engaged gear transmission with chain drive to the rear axle. When the fire engine is stationary & the clutch is disengaged the water pump can be operated. The water tank is under the front seat, with hose leading to the pump. Squirts up to 9.8 ft. Two removable reels, each with a hose of 31.5" length, coupling & jet. This Wilesco model is finished in red, black & brass. Operating time approx. 15 minutes. Length 16.2", width 7.5", Height 9.8", Weight: 7 lbs. 3oz. Manufacturer: Wilesco Model: Steam Fire Engine (D305)
...

The Wilesco Steam Locomobile was used around the turn of the century by farmers for threshing & plowing. It was horse drawn but was also frequently self propelled & was capable of moving under its own steam at speeds of 1.5 to 2.5 miles per hour. This sophisticated steam model has a wealth of technical details & it looks good too in its livery of black combined with brass.
Details: Brass boiler has a diameter of 2.2", length 9.1". This engine has a partitioned smoke chamber at the front for the condensation & to allow the smoke to escape through the chimney, which is hinged in the middle. The sight glass acts as a water gauge. Reversible double action cylinder with two flywheels with a diameter of 3.2" which can be operated in forward & reverse. Exact indicating pressure gauge, spring loaded safety valve, whistle with chain, governor (just for show), steam regulator, steam jet oiler, water drain tap, black varnished boiler house with gangways & ladder. The Wilesco locomobile is driven by a chain & the front axle can be steered. Operating time approx 15 minutes. The model is heated by dry spirit tablets. All parts are either painted or plated. Length 10.2", width 5.9", Height 8.3", Weight: 4 lbs. 7oz. Manufacturer: Wilseco Model: Steam Locomobile (D430)
...

Fully operational steamroller in kit form, for the enthusiast. With clear & understandable instruction pamphlet In an attractive gift box (590 x 510 x 60 mm). The technical details are the same as the finished models. Manufacturer: Wilesco Model: Steam Roller (D375) ...