The Wilesco Steam Engine Oil is for the lubrication of pistons, cylinders as well as all other bearings. This is a special oil designed for all Wilesco live steam engines. Purchase the correct oil to ensure long running life & trouble free maintainence of your model. Manufacturer: Wilesco Model: Steam Engine Oil (Z83) ...

The Wilesco Steam Engine with Accessories. All units mounted on a finely painted metal base plate. Don't forget the Esbit Fuel & the Steam Oil! Base plate 13.4" x 16.5". Height including smoke stack 11.0", Weight 6lbs 10oz. Manufacturer: Wilesco Model: Steam Engine with Accessories (D161) ...

Mirror polished boiler, diameter 65 mm, length 160 mm, capacity 530 ccms. Brick type walls, two footbridges with railings & two ladders. Double acting reversible brass cylinder with flywheel, spring loaded safety valve, additional steam whistle with chain, pressure gauge, steam regulator, sturdy diecast piston rods & centrifugal governor. Manufacturer: Wilesco Model: Steam Engine
- With Pump (D21)
...

The Wilesco Steam Fire Engine is based on an original which was produced by Magirus in Germany at the beginning of the last century. The Fire engine is operated by the steam engine. It can be driven forward & reverse. The speed is regulated by using the speed control valve. Further
Details: Vertical mirror polished brass boiler with a diameter of 3.2"height 5.9"boiler capacity 27.5 inelongated gauge glass Single boiler flue with a diameter of. 8" built into the boiler to improve efficiency & for the escape of steam exhaust. Safety flue attachment. Vertical reversible double action brass cylinder. Flywheel with a diameter of 3.2", spring loaded safety valve, steam whistle with chain, steam regulator, gathering tray for condensed water, die cast wheels with solid rubber tires, wooden seats, fire bell. Two lacquered die cast lamps, steering wheel for the front wheels. Clutch engaged gear transmission with chain drive to the rear axle. When the fire engine is stationary & the clutch is disengaged the water pump can be operated. The water tank is under the front seat, with hose leading to the pump. Squirts up to 9.8 ft. Two removable reels, each with a hose of 31.5" length, coupling & jet. This Wilesco model is finished in red, black & brass. Operating time approx. 15 minutes. Length 16.2", width 7.5", Height 9.8", Weight: 7 lbs. 3oz. Manufacturer: Wilesco Model: Steam Fire Engine (D305)
...

The Wilesco Steam Locomobile was used around the turn of the century by farmers for threshing & plowing. It was horse drawn but was also frequently self propelled & was capable of moving under its own steam at speeds of 1.5 to 2.5 miles per hour. This sophisticated steam model has a wealth of technical details & it looks good too in its livery of black combined with brass.
Details: Brass boiler has a diameter of 2.2", length 9.1". This engine has a partitioned smoke chamber at the front for the condensation & to allow the smoke to escape through the chimney, which is hinged in the middle. The sight glass acts as a water gauge. Reversible double action cylinder with two flywheels with a diameter of 3.2" which can be operated in forward & reverse. Exact indicating pressure gauge, spring loaded safety valve, whistle with chain, governor (just for show), steam regulator, steam jet oiler, water drain tap, black varnished boiler house with gangways & ladder. The Wilesco locomobile is driven by a chain & the front axle can be steered. Operating time approx 15 minutes. The model is heated by dry spirit tablets. All parts are either painted or plated. Length 10.2", width 5.9", Height 8.3", Weight: 4 lbs. 7oz. Manufacturer: Wilseco Model: Steam Locomobile (D430)
...

The Wilesco Steam Roller Old Smokey toy steam engine with a mirror polished & nickel plated boiler, It has a diameter of 1.8", length 7.3", boiler capacity 14 in, with water gauge glass. Double action reversible brass cylinder, with flywheel, spring loaded safety valve, steam regulator, steam whistle, steam jet oiler & footbridge. Smoke stack, traditional steering wheel chain drive. Flywheel with a diameter of 3.2" with grooved pulley. Clutch engaged gear wheel, permitting the use of the machine as a stationary steam engine. Operating time about 15 minutes per fuel charge. Anodized aluminum rollers. Finely painted, matching colors. Available in Green/ Red or Brass/ Black. Length, 12.6" width 5.9", Height 7.9", Weight: 3 lbs. 13oz. Manufacturer: Wilesco Model: Steam Roller
- Old Smokey (D365)
...

The Wilesco Steam Roller Black & Brass Kit is a quality model made to a high standard, not only for play value, but also ...

The Wilesco Steam Traction Engine has a mirror polished & nickel plated boiler with a diameter of 1.8", length 7.3", boiler capacity 14 in, with water gauge glass. Double action reversible brass cylinder, with flywheel, spring loaded safety valve, steam regulator, steam whistle, steam jet oiler & footbridge. Smoke stack, traditional steering wheel chain drive. Flywheel with a diameter of 3.2" with grooved pulley. Clutch engaged gear wheel, permitting the use of the machine as a stationary steam engine. Operating time about 15 minutes per fuel charge. Anodized aluminum wheels. Finely painted, matching colors. Available in Blue/ White or Brass/ Black. Length 11.8", width 5.9", Height 7.9", Weight: 3.7 lbs. Manufacturer: Wilesco Model: Steam Traction Engine (D405) ...

The Wilesco Steam Traction Engine is a very attractive steam traction engine in a polished brass & a matt black finish. A quality model, made to a high standard, not only for play value, but also as a superb show piece, to grace any cupboard, shelf or desk. The technical specifications are identical to those of the standard type Steam Traction Engine. Running time is about 15 minutes. Length, width,

Height: 300 x 150 x 200 mm, Weight: 2, 1 kg, Special gift box: 360 x 230 x 180 mm. Manufacturer: Wilesco Model: Steam Traction Engine Black & Brass (D406)

...