United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Stuarts Models - Ready to run
Available
-
The Stuart 10H is a
development from the
popular 10V Engine. It is
more than capable of
'doing work' and can
easily power a small
dynamo or pump. This
small horizontal engine
offers both power when
run at high speed and
visual interest when
operated at slow
crankshaft speeds. Engine
Description: Stuart 10H
Ready to Run.
Specifications:Length: 6
Inches.Flywheel: 3 Inch
Diameter.Bore: 3/4
Inch.Stroke: 3/4 Inch.
Contents:Cast Iron:
Boxbed, soleplate,
cylinder, valve chest
and cover, top and
bottom cylinder covers,
flywheel.Brass: Slide
valve, piston,
connecting rod,
eccentric rod, valve
operating block, glands,
crosshead, crankshaft
bearings.Steel:
Crankshaft, crankwebbs,
eccentric sheave,
crosshead pin, piston
and valve rods.Sundries:
Detailed drawings,
gaskets, cylinder
lagging, gland packing,
fixings pack.
Manufacturer: Stuart
ModelsModel / Part No:
10H Ready to Run Models
(34-50-71197)
Availability: In Stock
£589.85
Available
-
For customers who want to
build their own boiler or
have a very specific
application we are able
to offer the Pintail
engine without a boiler.
In a suitable
installation a pair of
Pintails could be used to
power a twin screw boat.
As with all our model,
the Pintail engine is
fully tested before being
dispatched. Engine
Description: Ready to Run
Pintail Marine Engine
Specifications:Length: 3
1/4 inches.Width: 2 1/4
inches.Height: 3 1/8
inches.Weight: 320g.Bore:
Twin 5/16 inch
dia.Stroke: 7/16 inch.
Contents: Pintail in-line
twin cylinder oscillating
engine with displacement
lubricator, exhaust
pipe, lubricator syringe
& needle, cylinder oil,
bearing lubricating oil
and preservative fluid.
Manufacturer: Stuart
ModelsModel / Part No:
Pintail Marine Engine
Ready to Run Models
(34-50-10174)
Availability: In Stock
£421.75
Available
-
For customers who want to
build their own boiler or
have a very specific
application we are able
to offer the Puffin
engine without a boiler.
In a suitable
installation a pair of
Puffins could be used to
power a twin screw boat.
As with all our models,
the Puffin engine is
thoroughly tested before
being dispatched. Engine
Description: Ready to Run
Puffin Marine Engine.
Specifications:Length: 3
1/2 inches.Width: 2 1/4
inches.Height: 3 3/16
inches.Weight: 380
g.Bore: Twin 7/16 inch
dia.Stroke: 7/16 inch.
Contents: Puffin in-line
twin cylinder oscillating
engine with displacement
lubricator, exhaust
pipe, lubricator syringe
& needle, cylinder oil,
bearing lubricating oil
and preservative fluid.
Manufacturer: Stuart
ModelsModel / Part No:
Puffin Marine Engine
Ready to Run
(34-50-10015)
Availability: In Stock
£468.75
Available
-
The Iver is the first in
our range of radio
controlled live steam
locomotives. Originating
from the well respected
Cheddar Models range we
have continued to use the
same high quality
suppliers and materials,
whilst taking the
opportunity to improve
the overall appearance.
Each model is supplied
complete with a Futaba
radio control system as
standard. The boiler is
powered by a ceramic gas
burner and is fitted with
a pressure gauge, water
gauge and safety valve.
Engine Description: Ready
to Run 'Iver' Radio
Controlled Steam Powered
Locomotive.
Specifications: Length:
11 inches.Height: 6
inches.Width: 4 5/16
inches.Weight: 2.65
kgs.Cylinder Bore: Twin
5/16 inch
diameter.Cylinder Stroke:
Twin 3/4 inch. Contents:
Locomotive: Complete and
ready to run Iver
locomotive with ceramic
gas burner, refillable
gas tank, pressure gauge
& syphon, water gauge,
safety valve,
displacement lubricator
and radio control
handset.Accessories: Gas
refill adaptor, Gas
burner, supply pipe,
jet & disposable gas can
valve, lubricator
syringe & needle,
cylinder oil, bearing
oil, boiler test
certificate and
instructions.
Manufacturer: Stuart
ModelsModel / Part No:
Iver Steam Locomotive
Ready to Run Models
(34-50-10261)
Availability: In Stock
£728.50
Available
-
The James Coombes is
based on a table engine
reputed to have worked
for more than a century
at a Bristol colliery.
The original engine
developed approximately
20 horsepower at 60 psi
running at 40 r.p.m. This
model is scaled down one
inch to the foot
(1:12).As with all Stuart
Models finished engines
it is supplied ready to
run complete with a hand
numbered certificate of
authentication.Engine
Description: Stuart James
Coombes Ready to Run.
Specifications: Height:
14 1/8 Inches.Flywheel: 7
Inches.Bore: 1
Inch.Stroke: 2 Inches.
Contents: Cast Iron:
Baseplate, crosshead
guides, pedestal,
pulley, crank,
cylinder, valve chest
and cover, top cylinder
cover, piston,
flywheel.Brass: Slide
valve, eccentric strap,
valve operating block,
glands, conrod bush,
crossheads, crankshaft
bearings.Steel:
Crankshaft, connecting
rod, eccentric sheave,
eccentric rod, clevis,
crankpin, top and bottom
plates, piston and valve
rods, all materials for
valve gear.Sundries:
Detailed drawings,
gaskets, viton O ring,
gland packing, fixings
pack. Manufacturer:
Stuart ModelsModel / Part
No: James Coombes Ready
to Run Models
(34-50-71409)
Availability: In Stock
£1722.55
Available
-
The Stuart D10 is well
suited to all kinds of
stationary and marine
work, being able to
reach speeds of up to
2000 rpm. This model must
be seen to be fully
appreciated. It is both
elegant and well designed
in addition to being
thoroughly practical. As
with all Stuart Models
finished engines it is
supplied ready to run
complete with a hand
numbered certificate of
authentication. Engine
Description: Stuart D10
Ready to Run Engine.
Specifications:Height: 6
Inches.Discwheel: 1 5/8
Inch Diameter.Bore: 3/4
Inch.Stroke: 3/4 Inch.
Contents:Cast Iron:
Boxbed, soleplate,
standards, cylinders,
valve chests and covers,
top and bottom cylinder
covers, flywheel.Brass:
Slide valves, pistons,
connecting rods,
eccentric rods, valve
operating blocks,
glands, crossheads,
crankshaft
bearings.Steel:
Crankshaft, crankwebbs,
eccentric sheaves,
crosshead pins, piston
and valve rods.Sundries:
Detailed drawings,
gaskets, cylinder
lagging, gland packing,
fixings pack.
Manufacturer: Stuart
ModelsModel / Part No:
D10 Ready to Run Models
(34-50-71209)
Availability: In Stock
£1108.00
Available
-
The Stuart 10V has for
many years been the most
popular engine in our
range. It is powerful
enough to drive a 48 inch
model steam boat. As with
all Stuart Models
finished engines it is
supplied ready to run
complete with a hand
numbered certificate of
authentication. Engine
Description: Ready to Run
Stuart 10V.
Specifications:Height: 6
Inches.Flywheel Diameter:
3 Inch Diameter.Cylinder
Bore: 3/4 Inch.Cylinder
Stroke: 3/4 Inch.
Contents:Cast Iron:
Boxbed, soleplate,
standard, cylinder,
valve chest and cover,
top and bottom cylinder
covers, flywheel.Brass:
Slide valve, piston,
connecting rod,
eccentric rod, valve
operating block, glands,
crosshead, crankshaft
bearings, Oil Cups and
Drain Cocks.Steel:
Crankshaft, crankwebbs,
eccentric sheave,
crosshead pin, piston
and valve rods.Sundries:
Detailed drawings,
gaskets, cylinder
lagging, gland packing,
fixings pack.
Manufacturer: Stuart
ModelsModel / Part No:
10V Ready to Run Models
(34-50-71187)
Availability: In Stock
£589.85
Available
-
For many years we were
asked to produce a twin
cylinder horizontal
engine, the Stuart Score
was the answer. It is
closely related to the
Stuart D10 but is
distinctive enough to be
attractive in its own
right. As with all Stuart
Models finished engines
it is supplied ready to
run complete with a hand
numbered certificate of
authentication. Engine
Description: Stuart Score
Ready to Run Engine.
Specifications: Length: 6
Inches.Flywheel: 3 Inch
Diameter.Bore: 3/4
Inch.Stroke: 3/4 Inch.
Contents: Cast Iron:
Boxbed, soleplate,
cylinders, valve chests
and covers, top and
bottom cylinder covers,
flywheel.Brass: Slide
valves, pistons,
connecting rods,
eccentric rods, valve
operating blocks,
glands, crossheads,
crankshaft
bearings.Steel:
Crankshaft, crankwebbs,
eccentric sheaves,
crosshead pins, piston
and valve rods.Sundries:
Detailed drawings,
gaskets, cylinder
lagging, gland packing,
fixings pack.
Manufacturer: Stuart
ModelsModel / Part No:
Score Ready to Run Models
(34-50-71218)
Availability: In Stock
£1108.00
Available
-
The Stuart Beam is a
relatively simple engine
to construct. The use of
Watts parallel motion
makes this engine
fascinating to watch,
particularly at slow
speeds. As with all
Stuart Models finished
engines it is supplied
ready to run complete
with a hand numbered
certificate of
authentication. Engine
Description: Stuart Beam
Finished Engine
Specifications:Length: 13
Inches.Flywheel Diameter:
7 Inches.Bore: 1 Inch
Diameter.Stroke: 2
Inches. Contents:Cast
Iron: Bedplate, column,
beam, pedestal, pulley,
crank, cylinder, valve
chest and cover, top and
bottom cylinder covers,
piston, flywheel.Brass:
Slide valve, eccentric
strap, valve opperating
block, glands, conrod
bush, crankshaft
bearings, beam bearings,
entablature bearings,
valve gear
bearings.Steel:
Crankshaft, connecting
rod, eccentric sheave,
eccentric rod, clevis,
crankpin, beam shaft,
entablatures, piston and
valve rods, valve gear
and parallel
motion.Sundries: Detailed
drawings, gaskets,
viton "O" ring,
gland packing, fixing
pack. Manufacturer:
Stuart ModelsModel / Part
No: Beam Ready to Run
Models (34-50-71392)
Availability: In Stock
£1722.55
Available
-
The Puffin engine is a
twin in-line oscillating
engine. We offer it
mounted on a baseplate
complete with a
Horizontal Boiler. The
plant is suitable for
powering small steam
launches of approximately
3 feet length. As with
all our model it is fully
tested before being
dispatched.Engine
Description: Ready to Run
Puffin Horizontal Marine
Power Plant
Specifications:Length: 11
1/4 inches.Width: 4
inches.Height: 8 1/4
inches.Weight: 2.1
kgs.Bore: Twin 7/16 inch
dia.Stroke: 7/16 inch.
Contents:Power Plant:
Puffin twin cylinder
oscillating engine on a
baseplate complete with
horizontal boiler and
lubricator.Accessories:
Gas burner, supply pipe,
jet & disposable gas can
valve. Exhaust pipe,
boiler filling funnel,
lubricator syringe &
needle, cylinder oil,
bearing oil,
preservative fluid,
boiler test certificate
and instructions.
Manufacturer: Stuart
ModelsModel / Part No:
Puffin Horizontal Marine
Power Plant Ready to Run
Models (34-50-10143)
Availability: In Stock
£897.75
Available
-
Vertical power plants are
well suited to launch
style boats where their
open decks allow for
taller boilers. The plant
is suitable for powering
small steam launches of
approximately 3 feet
length. As with all our
models, it is supplied
fully tested and complete
with everything you need
for running except water
and gas. Engine
Description: Ready to Run
Puffin Horizontal Marine
Power Plant
Specifications: Length: 9
inches.Width: 4 3/8
inches.Height: 10 1/8
inches.Weight: 2.2
kgs.Cylinder Bore: Twin
7/16 inch dia.Cylinder
Stroke: 7/16 inch.
Contents:Power Plant:
Puffin twin cylinder
oscillating engine on a
baseplate complete with
vertical boiler and
lubricator.Accessories:
Gas burner, supply pipe,
jet & disposable gas can
valve. Exhaust pipe,
boiler filling funnel,
lubricator syringe &
needle, cylinder oil,
bearing oil,
preservative fluid,
boiler test certificate
and instructions.
Manufacturer: Stuart
ModelsModel / Part No:
Puffin Vertical Marine
Power Plant Ready to Run
Models (34-50-10090)
Availability: In Stock
£897.75
Available
-
The Stuart S50 is an
elegant model 'Mill
Engine' of the type used
to power small factories
in the north of England
during the mid-nineteenth
century. As with all
Stuart Models finished
engines it is supplied
ready to run complete
with a hand numbered
certificate of
authentication. Engine
Description: Ready to Run
Stuart S50
Specifications: Length: 8
1/2 inches.Flywheel Dia.:
3 inches.Cylinder Bore:
5/8 inch.Cylinder Stroke:
1 1/4 inch. Contents:Cast
Iron: Soleplate,
cylinder, valve chest
and cover, front and
rear cylinder covers,
flywheel.Brass: Slide
valve, piston,
eccentric strap, valve
operating block, glands,
crosshead, Oil
cups.Steel: Crankshaft,
crankwebb, connecting
rod, eccentric sheave,
eccentric rod, distance
pieces, slide bars,
crankpin, piston and
valve rods.Sundries:
Detailed drawings,
gaskets, fibre washer,
cylinder lagging, gland
packing, fixings pack.
Manufacturer: Stuart
ModelsModel / Part No:
S50 Ready to Run Models
(34-50-71317)
Availability: In Stock
£589.85
Available
-
The Twin Victoria is
essentially two Stuart
Victorias running side by
side. This makes for a
very impressive model
which will be the center
piece of any collection.
As with all Stuart Models
finished engines it is
supplied ready to run
complete with a hand
numbered certificate of
authentication. Engine
Description: Stuart Twin
Victoria Ready to run
Model.
Specifications:Length: 15
1/2 Inches.Flywheel: 7
Inch Diameter.Bore: 1
Inch.Stroke: 2 Inches.
Contents: Cast Iron:
Baseplates, cranks,
cylinders, valve chests
and covers, front and
rear cylinder covers,
pistons, flywheel.Brass:
Slide valves, eccentric
straps, valve operating
blocks, glands, conrod
bushes, crossheads,
crankshaft
bearings.Steel:
Crankshaft, connecting
rods, eccentric sheaves,
eccentric rods,
clevises, crankpins,
piston and valve rods,
all materials for valve
gear and crosshead
guides.Sundries: Detailed
drawings, gaskets,
viton O rings, gland
packing, fixings pack.
Manufacturer: Stuart
ModelsModel / Part No:
Twin Victoria Ready to
Run Models (34-50-71427)
Availability: In Stock
£2805.00
Available
-
The Stuart Victoria
follows closely the
design of low pressure
horizontal engines used
throughout the nineteenth
century, to provide
power in workshops and
factories. The large
flywheel allows the
engine to run smoothly at
low speeds where the long
elegant stroke can be
appreciated. As with all
Stuart Models finished
engines it is supplied
ready to run complete
with a hand numbered
certificate of
authentication. Engine
Description: Stuart
Victoria Ready to Run
Engine. Specifications:
Length: 15 1/2
Inches.Flywheel: 7 Inch
Diameter.Bore: 1
Inch.Stroke: 2 Inches.
Contents:Cast Iron:
Baseplate, pedestal,
pulley, crank,
cylinder, valve chest
and cover, front and
rear cylinder covers,
piston, flywheel.Brass:
Slide valve, eccentric
strap, valve operating
block, glands, conrod
bush, crossheads,
crankshaft
bearings.Steel:
Crankshaft, connecting
rod, eccentric sheave,
eccentric rod, clevis,
crankpin, piston and
valve rods, all
materials for valve gear
and crosshead
guides.Sundries: Detailed
drawings, gaskets,
viton O ring, gland
packing, fixings pack.
Manufacturer: Stuart
ModelsModel / Part No:
Victoria Ready to Run
Models (34-50-71421)
Availability: In Stock
£1667.00
Available
-
The Stuart Half Beam is a
recent addition to our
range. Based on the
Stuart Beam this engine
is relatively slow moving
with the advantage of
only requiring a small
boiler to run. Under
steam the intricate
movement of the valve
gear combined with the
elegant rocking of the
beam make this engine
almost mesmerizing to
watch. As with all Stuart
Models finished engines
it is supplied ready to
run complete with a hand
numbered certificate of
authentication. Engine
Description: Stuart Half
Beam Rady to Run Engine.
Specifications:Width: 11
3/4 Inches.Flywheel: 7
Inch Diameter.Bore: 1
Inch.Stroke: 2 Inches.
Contents:Cast Iron:
Baseplate, beam, beam
support, ?A? frames,
pedestal, pulley,
crank, cylinder, valve
chest and cover, top and
bottom cylinder covers,
piston, flywheel.Brass:
Slide valve, eccentric
strap, valve operating
block, glands, conrod
bush, beam pivot
support, crankshaft
bearings, beam support
bearings, valve gear
bearings.Steel:
Crankshaft, connecting
rod, eccentric sheave,
eccentric rod, clevis,
crankpin, piston and
valve rods, all
materials for valve gear
and beam pivot.Sundries:
Detailed drawings,
gaskets, viton O ring,
gland packing, fixings
pack. Manufacturer:
Stuart ModelsModel / Part
No: Half Beam Ready to
Run Models (34-50-71458)
Availability: In Stock
£1722.55
Denmark