United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Steam & Electric Motors
Available
-
1-1/4" Exhaust Oil
TrapThe exhaust oil trap,
from Miniature Steam,
separates the oil from
the water in the exhaust
system of the engine and
is a mandatory item in
many countries that
permit use of steam
engine models for hobby
use.Lubrication oil,
that is essential to
prevent wear of engine
components during use,
is carried to the exhaust
with the steam and must
be separated for
ecological reasons.The
engine exhaust gases pass
through this product and
it gather the excess
lubricating oil. It must
therefore be removed from
time to time and a 10 ml
syringe is supplied with
the unit to enable
periodical removal of
extracted oil through the
port shown in the
image.Inlet and exhaust
pipes are a standard
4.7mm (3/16”) copper
tube and are normally
made with “slip on”
rubber tube supplied with
the unit.This is
essentially a passive
item in a power assembly
and is suitable for up to
twin cylinder engines
with bore/stroke up to 11
mm.Dimensions:Cylinder
Diameter: 1-1/4"
(31.8mm)Cylinder Height
2" (51mm)Height
Overall 3 "
(75mm)Piping 3/16"
(4.7mm) for connection
with "slip on"
rubber hose supplied
Manufacturer: JotikaModel
/ Part No: Exhaust Oil
Trap (MS4001)
Availability: In Stock
£32.20
Available
-
Miniature Steam Clyde
Twin Cylinder Oscillator
Engine, fully machined
for assemblySupplied
fully machined, ready
for assembly, this kit
builds into the same high
quality Clyde Twin
Cylinder Oscillator
Engine as the fully
assembled MS5009. So
simple to build from the
supplied instructions,
the only tools needed for
assembly are a 3mm hex
set key (supplied), a
small flat blade
screwdriver and a small
adjustable
spanner!Overall
Dimensions:Height -
85mmWidth (with
displacement lubricator)
- 80mmLength - 90mmWeight
- 390g Manufacturer:
JotikaModel / Part No:
Clyde Assembly Kit
(MS5300)
Availability: In Stock
£281.75
Available
-
Thunder Tiger is proud to
introduce the all-new
PRO-46M Two-Stroke marine
engine. The anodized
water cooling cylinder
head helps to make the
engine run more stable
which in turn enables
quick and powerful
acceleration. An extra
long, SG type crankshaft
is fitted so can be
adapted for multiple
boats, this engine has
been especially designed
for radio control model
sport racing boats.
Features:Side exhaust.ABN
construction: Aluminium
piston with Nickel-plated
brass cylinder
liner.Hypereutectic
machined Al-Si ringed
piston.High strength
connecting rod with
bushings pre-installed.SG
crankshaft for clutch
system.Water-Cooled
Cylinder Head.Dual ball
bearing-supported
crankshaft.2 Needle
valves carburettor. W/9mm
carb bore.Vertical
mounted main needle
valveRedline R2 glow plug
included.
Specifications:Displacement
(cc/
cu.in.)7.47/0.455Bore:
21.8mmStoke:
20.0mmPractical RPM4,
500~24, 000Output
(BHP/RPM)2.46/23,
000Weight, (g/oz) w/o
Muffler: 350g
Manufacturer: Thunder
TigerModel / Part No:
(TT954)PRO -46M Two
Stroke Marine Engine
Availability: In Stock
£119.99
Available
-
This horizontal boiler
steam plant kit, from
Miniature Steam,
features the Horizontal
Boiler Mounting Tray
(MS4040), the fully
machined Clyde Twin
Cylinder Oscillator
Engine for assembly
(MS5300) and the 3”
Horizontal Centre Flue
Boiler (MS5045) which
also includes the
1-1/4” Ceramic Burner
(MS5092).NOTE: The
Horizontal Boiler is
pressure tested before
shipping and is therefore
supplied with test
certificate.Dimensions:Length:
280mm or 320mm (approx)
depending on boiler
orientationWidth:
120mmHeight: 220mm
(approx) over boiler
stack Manufacturer:
JotikaModel / Part No:
Clyde Horizontal Assembly
Kit (Box Standard)
(MS4049)
Availability: In Stock
£770.59
Available
-
Bruma 600 motor unit.
This motor has been
designed for the bruma
kit; it allows one motor
through gears to drive
both propshafts. It runs
on a nominal 6volts and
needs a 15amp speed
controller. Manufacturer:
Mantua ModelModel / Part
No :Bruma motor unit
(600)
Availability: In Stock
£47.00
Available
-
This horizontal boiler
steam plant kit, from
Miniature Steam,
features the Exhaust Oil
Trap (MS4001), the 2”
Refillable Gas Tank
(MS4500), the standard
refillable gas tank
adaptor (MS5058), the
Horizontal Boiler
Mounting Tray (MS4040),
the fully assembled Clyde
Twin Cylinder Oscillator
Engine (MS5009) and the
3” Horizontal Centre
Flue Boiler (MS5045)
which also includes the
1-1/4” Ceramic Burner
(MS5092).NOTE: The
Horizontal Boiler and
Refillable Gas Tank are
pressure tested before
shipping and are
therefore supplied with
test
certificates.Dimensions:(excluding
refillable gas
tank)Length: 280mm or
320mm (approx) depending
on boiler
orientationWidth:
120mmHeight: 220mm
(approx) over boiler
stackManufacturer:
JotikaModel / Part No:
Clyde Horizontal
Assembled Kit (Box
Deluxe) (MS4046)
Availability: In Stock
£1020.65
Available
-
Miniature Steam Clyde
Twin Cylinder Oscillator
Engine, fully
assembledSupplied fully
assembled the Clyde twin
cylinder oscillator
engine, from Miniature
Steam, has an 11mm
bore/stroke and is
designed to operate on
steam pressures between
30 and 45psi. The
engine’s cast
components are from a
marine grade
non-corrosive alloy which
will not tarnish or
corrode like traditional
brass alloys often used
in inferior model
oscillator designs. The
crankshaft is from
stainless steel and the
remainder of the machined
components from brass.
This combination gives
maximum protection from
corrosion and helps to
give excellent life to
the engine.Overall
Dimensions:Height -
85mmWidth (with
displacement lubricator)
- 80mmLength - 90mmWeight
- 390g Manufacturer:
JotikaModel / Part No:
Clyde Fully Assembled
(MS5009)
Availability: In Stock
£402.50
Available
-
This refillable gas tank,
from Miniature Steam,
is designed to accept
approximately 75% of its
volume as a full charge;
this prevents excessive
pressure build up in high
ambient temperatures
(such as in an enclosed
model) and prevents
liquid gas from reaching
the burner!NOTE: The
refillable gas tank is
pressure tested before
shipping and is therefore
supplied with test
certificate.Dimensions/Capacity:Body
diameter 50mmOverall
length 95mmOverall height
(including tap)
85mmMaximum width (over
mounting plate)
60mmWeight (empty)
260gPractical gas
capacity - 120ml
Manufacturer: JotikaModel
/ Part No: Refillable Gas
Tank (MS5400)
Availability: In Stock
£90.28
Available
-
As well as welded corners
to retain condensate,
this horizontal boiler
mounting tray, from
Miniature Steam,
features multiple
mounting holes for easy
installation of the 3”
Horizontal Centre Flue
Boiler (MS5045), Exhaust
Oil Trap (MS4001) and
Clyde Twin Cylinder
Oscillator Engine
(MS5009/MS5300).
Manufacturer: JotikaModel
/ Part No :Horizontal
Boiler Mounting Tray
(MS4040)
Availability: In Stock
£32.20
Available
-
This horizontal boiler
steam plant kit, from
Miniature Steam) features
the Horizontal Boiler
Mounting Tray (MS4040),
the fully assembled Clyde
Twin Cylinder Oscillator
Engine (MS5009) and the
3” Horizontal Centre
Flue Boiler (MS5045)
which also includes the
1-1/4” Ceramic Burner
(MS5092).NOTE: The
Horizontal Boiler is
pressure tested before
shipping and is therefore
supplied with test
certificate.Dimensions:Length:
280mm or 320mm (approx)
depending on boiler
orientationWidth:
120mmHeight: 220mm
(approx) over boiler
stackManufacturer:
JotikaModel / Part No:
Clyde Horizontal
Assembled Kit (Box
Standard) (MS4051)
Availability: In Stock
£886.51
Available
-
This burner, from
Miniature Steam, has a
spun brass body with a
cast ceramic insert that
has been specifically
designed to provide
optimum burning
characteristics in
enclosed spaces such as
the centre flue or
firebox of a boiler. They
are entirely different to
inferior ceramic burners
made from heating tiles
designed for radiant room
heaters! The gas/air
mixture of the Miniature
Steam ceramic burner
burns outside the ceramic
insert. This results in a
more efficient transfer
of heat to the boiler’s
heating surface. The
burner also remains
relatively cool, thus
improving the thermal
efficiency of the burner
and minimising the chance
of back burning.
Manufacturer: JotikaModel
/ Part No: 1-1/4' Ceramic
Burner (MS5092)
Availability: In Stock
£65.78
Available
-
Venice motorboat 601.
This motor has been
designed for the Venetian
motor boat kit. The kit
includes the laser cut
ply mounting plate and
flexible coupling. It
runs on a nominal 6volts
and needs a 15amp speed
controller.Venice motor
boat 730 Scale 1:28
Length 830mm. This is an
accurate reproduction of
a typical venetian
passenger motor boat
VAPORETTO VENIZIANO.
These boats were
originally designed and
built prior to the 1940
and produced until the
1960. This kit is
designed for radio
control but is equally
detailed enough to make a
fine display model. A
plank on frame
construction, the kit
contains:- Building plans
with general details
English instructions,
walnut or lime planking,
brass and walnut
fittings, rigging cord
and silk flag. All sheet
ply sections are laser
cut for accuracy.The
motor kit is available as
a separate item, part
No. 601. Manufacturer:
Mantua ModelModel / Part
No: Venice Motorboat
motor unit (601)
Availability: In Stock
£32.50
Available
-
Miniature Steam 3"
Centre Flue Style
Horizontal BoilerThis
3” horizontal centre
flue style boiler system,
from Miniature Steam,
is designed to run small
medium pressure model
steam engines of up to
19mm (3/4”) bore/stroke
in Single Cylinder and
16mm (5/8”) bore/stroke
in Twin Cylinder with an
operating pressure of up
to 60psi. As shown, the
traditional design of
this boiler system - the
steam dome with collar
and flue with collar and
the integral cast feet -
will add to the charm and
feel of any model you
care to mount it in. The
cast feet also mean that
the boiler can be mounted
anywhere, there is no
need for a specialised
mounting tray, making
installation a simple
process, even in tricky
models. Pressure gauge,
walnut lagging timber and
brass securing straps are
also included.The boiler
also features the
Miniature Steam Ceramic
Burner (MS5092). This
burner is cast from
ceramic and has been
specifically designed to
provide optimum burning
characteristics in
enclosed spaces such as
the centre flue or
firebox of a boiler. They
are entirely different to
inferior ceramic burners
made from heating tiles
designed for radiant room
heaters! The gas/air
mixture of the Miniature
Steam ceramic burner
burns outside the ceramic
insert. This results in a
more efficient transfer
of heat to the boiler’s
heating surface. The
burner also remains
relatively cool, thus
improving the thermal
efficiency of the burner
and minimising the chance
of back burning.NOTE: The
Horizontal Boiler is
pressure tested before
shipping and is therefore
supplied with test
certificate.DetailsDiameter3
inch76.2mm Width
(including stand) 3.5
inch 90mmHeight (to top
of steam pressure gauge)
4.9 inch 125mmHeight (to
top of steam flue) 8.7
inch220mmLength (without
burner) 5.9 inch
150mmLength (with burner
attached) 7.3 inch
185mmWeight (dry) 1.2
kgWorking pressure 60psi
(4 bar) 400 kPaTest
pressure 120psi (8 bar)
800 kPa Manufacturer:
JotikaModel / Part No: 3'
Horizontal Boiler
(MS5045)
Availability: In Stock
£488.75
Denmark