United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Radio Control Model Boat Kits
Available
-
Deans MarineThe Badger
customs cutter is a
Customs & Excise launch
based in Plymouth and in
the service of Her
Majesties Customs and
Excise.The launch is
designed for handling all
but the worst conditions,
and is renowned for her
sea kindliness.As far as
we know the Badger was
stationed at Plymouth
with her near sisters,
but at the present time
we cannot obtain any
further information for
the Custom & Excise.
Details of the kitScale
1/15 Length 949mm Beam
255mm Sailing weight
5.1kgThe kit is based on
a glass fibre hull,
glass fibre deck moulding
with access hatch moulded
in the deck. plus a
complete glass fibre
moulding for the
superstructure.The
wheelhouse & funnel is
moulded from clear
styrolux, the brass
framing is from pre-cut
brass vinyl.A full set of
detailed fitting cast in
light alloy is included
in the kit along with all
running gear, prop and
rudder.As with all kits
in our range, a
comprehensive instruction
book and full size plan
is included. plus the
Deans renowned
performance on the water.
Manufacturer: Deans
MarineModel: HMCC Badger
(403)
Availability: In Stock
£269.10
Available
-
Paradise Yacht RTS –
Yellow (B-AQU901A4)It's
the ultimate R/C pleasure
cruise! Not only does the
Paradise come with radio
system already installed,
but even the rigging has
been done for you.
Factory-finished, the
model requires no sanding
or painting... and
because it's powered by
the breeze, you'll need
nothing more than a few
ordinary "AA"
batteries to get your
voyage under way •
Assembles quickly -
factory-finished, with
radio gear and ballast
installed •
Lightweight, strong
fibreglass hull arrives
beautifully
factory-finished •
Low-drag keel and boom
disconnect for easy
transporting Sail for
pleasure - leave work
behind..... Required for
operation (Not included):
12 AA batteries.
Manuafcturer: RipmaxPart
/ Stock No.: Paradise
Yacht RTS – Yellow
(B-AQU901A4)
Availability: In Stock
£149.99
Available
-
Deans MarineThe two boats
in the class 93 & 94 of
the 46ft Crash & Rescue
tenders were constructed
by Vosper Ltd of
Portsmouth in1952 for the
R.A.F. The hulls were of
double skin mahogany on
birch plywood framing.
Powers was from two Rover
Metorite engines of 375
hp each, This was a 8
cylinders V type engine
of 18 litres Drive was to
2 X 3 blade props (both
rotating the same way)
Giving a top speed of 28
+ knots Fire fighting was
from two 3.5” fire
monitors that could spray
water of foam. The power
for the pumps was from a
Ford V8 engine to give
5-600 g.p.m. This pump
was also be used as a
salvage pump. For rescue
work she was fitted with
a spring tow hook, line
throwing equipment and
rockets, stretchers and
a portable davit. The two
craft were taken into
service in 1952-53 at
Calshot. They spent many
year as experimental
craft for it is alleged
that they were designed
to complement the SARO
princess flying boats
that spent many years at
Calshot. The craft were
reported to have
startling acceleration
and could stop in there
own length once the
automatic 7 sec time
delay came into effect on
the reverse gear. They
had a turning circle of
three boat lengths at 28,
5 knots.Both boats were
sold from service in
1958.Details of the
kitScale 1/24 Length
610mm Beam 180mm Sailing
weight 2kgs The kit is
based on a detailed
glassfibre hull with
rubbing strip, fender
strip, proptube and
rudder exits, moulded
into the hull.The Deck is
from 1mm printed plastic.
Vac-fomings supply the
nicads battery tray,
rudder servo mount and
motor mounting for the
internals. Vacformings in
clear styrolux form the
forward and aft cabin
assembly. Printed plastic
supplies the construction
for the aft cockpit. A
new system for clear
windows has been
developed for this model
consisting of computer
cut masking film which is
fitted onto the clear
mouldings, the cabin is
then primed and painted
and the film removed.
Computer cut
"aluminum"
frames fitted onto the
clear plastic for
windscreens etc, cabin
windows, skylights etc.
Cut window frames are
then applied over the
edge of the clear parts.
This removes one of the
jobs that modelers tell
us they dislike, that of
cutting our complicated
windows from mouldings,
all similar sizes, with
complex corners. A full
set of fittings in cast
alloy and resin is
included in the kit,
along with propshaft,
proellor, rudder, and
tillers arm, plus decals
for that finishing touch
to this colourful
model.To aid construction
a comprehensive
instruction book and full
size plan is included.The
full size craft were
noted for their rocket
like acceleration and
stopping ability, plus
outstanding handling.The
model with its boat
weight of 970gms and
powered by its
recommended black 400
motor and nicads gives
all handling
characteristics of the
full size craft, i, e it
is a delight to drive.
MANUFACTURER: Deans
MarineModel: Crash Tender
(176)
Availability: In Stock
£116.41
Available
-
Deans MarineThe design of
these Air Sea Rescue
launches was an
adaptation of a Motor Gun
Boat being developed by
British Power Boats for
the Royal Navy, (see the
M.G.B. in our range
).These craft were the
first to be fitted with
aircraft type turrets
from the start. After
experience in the Channel
these vessels earned a
great reputation amongst
their crew members. The
racy lines of the craft
added a touch of glamour
when the outline of the
type was used for the arm
badge worn by the
crews.Although the
Whalebacks saw service
around the coasts of
Britain, some of the
type were sent to the Med
and to the coasts of
India.During the Dieppe
raid when some of the
craft were attacked and
sunk with loss of life
they were more heavily
armed with a 20mm machine
cannon on the stern (see
the B.P.C.63ft)Details of
the kitScale 1/24 Length
812mm Beam 215mm Sailing
weight 1.8kg The 2 models
in this range of craft
are based on a
lightweight glass fibre
hull capturing the racy
lines of the prototype.
The deck is of 1/8"
resin bonded marine
plywood fitted to the top
of the rubbing strip
which is moulded into the
hull for easy
construction.The complete
superstructure moulding,
along with the carly
float, battery box, are
all in vacformed plastic
to speed construction.
The gun turrets are
formed in clear acrylic
along with a full set of
weapons and fittings to
complement the FULL SIZE
PLAN and instructions.
Manufacturer: Deans
MarineModel: Whaleback
63ft (193)
Availability: In Stock
£179.25
Available
-
These small seaworthy
ships were originally
designed along trawler
lines to protect the
extensive British
interests in the North
Sea oil installations and
to patrol the 200 miles
fishery limits. They
displace 925 tons with
two Ruston diesel engines
of 2190BHP each driving
one variable pitch
propeller giving a top
speed of 17 knotsWeapons
fit is a single 40mm
bofors gun and light
weapons. The normal
compliment is 39 officers
and men.Details of the
kitScale 1/72Length
820mmBeam 160mmSailing
weight 5kgThe fiberglass
hull in this kit is with
full plating and port
detail. Computer
generated printed plastic
forms the main
superstructure along with
the 1mm plastic deck.To
complete the construction
of the model all complex
parts are vacformed in
1mm plastic for funnel,
boats, turret etc.A
complete set of fittings
are included in the kit
with all detail parts
such as weapons, deck
fittings, etc, cast in
light alloy. Larger item
such as lockers, floats,
and gun bases are
moulded in plastic
castings for light
weight.Ladders and
stanchions are also in
etched brass to give a
final showcase
finish.Propshaft in
stainless steel are cased
in a brass proptube with
fitted an oiler and
replaceable bearing along
with rudder and tiller
arm.These, together with
a comprehensive
instruction book and a
FULL SIZE PLAN assist in
the assembly of this
impressive model.A colour
chart and a set of precut
decals for the pennant
numbers are included in
the kit to add the
finishing touch to this
most attractive addition
to our warship range.
Manufacturer: Deans
MarineModel: HMS Guernsey
(433)
Availability: In Stock
£252.75
Available
-
In 1942 the RAF were
looking for a suitable
type of HSL to replace
existing 64ft and 63ft
designs. Three designs
were chosen the 67ft
Thornycroft being one of
them. The specs called
for a craft more suited
for use in the western
approaches in its
particular severe weather
conditions.It had better
accommodation for the
crew and more space in
the sick bay. This type
of launch was well liked
by its crew for its
gentle ride and its well
equipped galley.As can be
expected from a builder
with such a renowned
reputation for the
construction of motor
yachts the 67ft had a
“yacht” like
appearance and superb
detailing and finish.The
67ft was designed from
the outset for rescue
work. Speed was
sacrificed for greater
range and comfort. The
MK1B was powered by twin
non-handed Thornycroft
RY/12/1 engines giving
650BHP at 2000 rpm
through Vee drives giving
a max sped of 24.5 knots
with a range of 350
miles, extra fuel was
carried on the deck in
racks to extend the range
when required.Most of the
class in this range were
stationed in UK waters
for WWII, and were
disposed of in 1946/47,
HSL 2661 was recoded as
being written off in May
1947.SCALE 1/24 Length
850mm Beam 210mmThe Kit
is based on a lightweight
glass fibre hull
capturing the racy lines
of the prototype. The
deck is of 1.5mm H.I.P.
plastic fitted to the top
of the rubbing strip
which is moulded into the
hull for easy
construction.The complete
superstructure moulding,
along with the gun cabs
and the dinghy, plus the
battery boxes, are all
in vacformed plastic to
speed construction.The
gun turrets are formed in
clear acrylic along with
a full set of weapons and
fittings.A Full size
COLOUR Plan and
comprehensive
instructions including
many digital pictures,
plus a set of decals to
give a colorful finished
model.As in all of the
Deans range, the on the
water performance is
outstanding.
Manufacturer: Deans
MarineModel: 2661 HSL
Availability: In Stock
£225.00
Available
-
Level: ExperiencedModel
Number:
BB528CManufacturer:
Billing BoatsThis level
is for those who have
tried to build a model
ship before, or perhaps
one of plastic. These
models also have a simple
construction, though you
will meet a number of
’challenges’ on the
way!The Smit Nederland
was built in 1979 at the
BV Scheepswerft &
Machinefebriek "De
Merwede" in
Hardinzveld, Holland.
Length 28.40 m, breadth
8, 85 m, draught 3.85 m.
The vessel is driven by
two "Stork
Werkspoor" diesel
engines, whose 1000 rpm
yield 1800 HP. Top speed
is 12 knots; the acting
radius is 2, 250 miles. A
special detail of this
ship is the propellors,
which are equipped with
reversible blades in jet
streams, and two basin
rudders which ensure good
manoeuvrability.Specification:Height
- 52Length – 87Width
– 27Laser Cut
PartsScale: 1:33 ABS
HullModel suitable for
R/C.
Availability: In Stock
£319.00
Available
-
A 1938 stepped hydroplane
driven by Harold Wilson,
and designed by Douglas
van Patten for Gold Cup
racing.Hull construction
of plywood with mahogany
deck and vac formed
parts, the kit features
laser cut components,
genuine copper exhaust
pipes, scale vinyl
decals, display stand,
motor mount (for 500-600
motors) and scale cockpit
interior with cloth
seats.Kit also includes
the running pack which
features motor to shaft
coupler, thrust bearing,
drive shaft, stuffing
tube, prop, prop nut,
rudder and mounting
hardware.Scale:
1:12Length: 648mm
(25.5")Beam: 178mm
(7") Model Suitable
for R/C. Manufacturer:
Osborn Model KitsModel:
Model Kits Miss Canada
III (1:12 Scale Inc Drive
Kit) (OSB-2502)
Availability: In Stock
£205.04
Available
-
Never before has it been
easier to try your hand
at the exciting world of
r/c electric boats.
FastWave’s new budget,
entry level CubShark
provides everything you
need to be out on the
water in no time. Just
add AA batteries to the
transmitter and receiver
box, charge the 7.2v
battery and away you go.
This may be an entry
level boat, but you will
be churning up the water
and watching the
Cubshark’s sleek hull
cut through the surface
just like the real
thing.Features:2-channel
radio installed Separate
3kg servos and receiver
units Radio box Water
cooled 540 motor Quick
release motor mount
Lightweight ABS moulded
hull design with hatch
Wall charger and 7.2v
battery included
Specifications:Length:
650mm Width: 200mm
Height: 140mm Weight:
1270g (approx) FW0100
Cubshark EP 650mm
Ready-To-Run Racing Boat
- White Manufacturer:
Fast WaveModel / Part No:
Cubshark EP 650mm
(FW0100)
Availability: In Stock
£77.99
Available
-
Level: ExperiencedModel
Number:
B478CManufacturer:
Billing BoatsThis level
is for those who have
tried to build a model
ship before, or perhaps
one of plastic. These
models also have a simple
construction, though you
will meet a number of
’challenges’ on the
way!Smit Rotterdam was
built in 1975 for Smit
International BV in
Holland, and was at the
time of its completion
the largest and most
powerful tugboat in the
world - with a tonnage of
2, 273 tons, a length of
75 m, a 22, 000 HP
engine and a top speed of
16.5 knots. The ship is
built with bulb stern and
stern nozzle; inboard
equipment includes the
most modern gear for
navigation, steering and
radio communication.
Specification:Height -
50Length - 90Width -
20Laser Cut PartsScale
1:75 Model suitable for
R/C.
Availability: In Stock
£266.95
Available
-
FastWave’s first
release is the exciting
Tigershark EP racing
boat. Factory assembled
with 2-channel radio the
electric powered version
features a water cooled
540 motor providing power
through a specially
designed gearbox for
optimum performance. A
sealed radio box provides
protection for the
replaceable servos and
receiver, while the
rudder and prop assembly
features adjustable angle
for different settings
depending on the water
conditions. Charger and
7.2v 1800mah battery
included.If you want a
more thrilling boating
experience then maybe the
GP Nitro powered
Tigershark is the model
for you. Powered by a
pull start. 18 water
cooled engine it provides
the power and realism
associated with racing
power boats. Includes
water proof radio box and
adjustable rudder/prop
positions as the EP
version. Glow start and
fuel bottle included.
Features2-Channel Radio
Installed Seperate Servo
and Receiver Waterproof
Radio Box Adjustable
Thrust Angle Propulasion
Unit Geared 500 Class
electric Motor or. 18
Pull Start Water Cooled
Nitro Engine Lightweight
Moulded hull Quick
Release Hatch 7.2v
Battery & Charger
Included Spare Parts
Available Manufacturer:
Fast WaveModel / Part No:
Tigershark 920mm GP Nitro
RTR Racing Boat - White
(FW0005)
Availability: In Stock
£129.99
Available
-
Fast ready-to-run speed
boat with 2.4 GHz remote
controlThe Fast Man
offers everything that is
needed to get started
quickly in High Speed
Racing. A smart design,
high-quality work and a
streamlined hull for
competitions complete the
features of this
Ready-to-Run model. A
future-proof 2.4 GHz
remote control system
saves you the tiresome
business of checking for
a free channel for your
model. You can start
racing immediately and
can also run several
boats at once. A real
racing experience with
the Fast
Man.Specification:Length:
600 mmWidth: 180
mmHeight: 130 mmTotal
displacement: 830
gManufacturer:
RobbeModel: Robbe Fast
Man 2, 4 GHz RTR (1-1128)
Availability: In Stock
£179.99
Available
-
This beautifully finished
model is supplied in
Ready-To-Run format with
included radio control
and 26cc pullstart petrol
engine – just fuel it
up and you're ready to
go! The fibreglass
composite hull and
cockpit is supplied
factory finished and
painted. Waterproof radio
boxes protect onboard
R/C. All screws and nuts
are stainless steel to
avoid corrosion.Includes
CNC aluminium alloy
rudders are fitted for
sharp handling and added
durability. Supplied with
a boat
stand.Specification
Length: 1280mmHeight:
280mmWeight: 13.36KgRTR
IC Engine: 26cc Petrol
Width: 440mmManufacturer:
RipmaxPart No:
B-VAN001E-GPR
Availability: In Stock
£384.99
Available
-
The Abdiel class of fast
minelayers was a most
successful design of
ship, the first group
being launched in 1940.
The class of ship was
dependent of sustained
high speed for mine
laying operations.Manxman
was constructed at
Stephen Hawthorn Leslie
works and launched 0n
5/9/40 She was powered
with 2 shaft geared
turbines with 72, 000
S.H.P giving a top speed
of 40 + knots with a full
load of 156 mines.Manxman
served through-out WW 11
and lasted until the 70s
as m/S support ship based
in Malta.This class of
successful ships will
always be remembered for
their wartime exploits.
Built for mining
operations in enemy
waters they were
exceedingly effective in
that role. Their
outstanding attributes of
very high speed and
considerable enclosed
carrying capacity only
added to their usefulness
when it came to running
troops and supplies
through enemy defensives
in the Mediterranean sea,
the first four the class
made a very important
contribution helping to
sustain Malta in
1942Details of the
kitScale 1/96Length
1.34mBeam 150mmSailing
weight 5kgsThe fiberglass
hull in this kit is with
full plating and port
detail. The large stern
mine laying doors and all
outlets are moulded into
this hull. Computer
generated printed plastic
forms the main
superstructure along with
the 1mm plastic deck. To
complete the construction
of the model all complex
parts are vacformed in
1mm plastic for funnel,
boats, turrets etc.A
complete set of fittings
are included in the kit
with all detail parts
such as weapons, deck
fittings, etc, cast in
light alloy. Larger item
such as lockers, floats,
and gun bases are
moulded in plastic
castings for light
weight.The two large mine
loading cranes, such a
notable feature of this
class of ship are
assembled from etched
brass in 9 parts for
simple assembly.Ladders
and stanchions are also
in etched brass to give a
final showcase
finish.Propshafts in
stainless steel are cased
in brass proptubes with
fitted oilers and
replaceable bearings
along with rudder and
tiller arm.These,
together with a
comprehensive instruction
book and a FULL SIZE PLAN
assist in the assembly of
this impressive model.A
colour chart and a set of
decals for signal flags
are included in the kit
to add the finishing
touch to this most
powerful looking model as
a worthy and much
requested addition to our
warship range.
Manufacturer: Deans
MarineModel: HMS Manxman
(441)
Availability: In Stock
£322.15
Available
-
Racy water sportsman with
brushless electric
driveAfter many
successful years, the
time is ripe for a
successor to the robbe
Sea-Jet - the
Evolution.The new Sea-Jet
has been both optically
and technically
overhauled and
re-designed. Learning
from the modern
competition Race-Jets,
the optical appearance is
significantly racier than
its predecessor To
improve its roll
stability, the hull has
been made wider and
lower. To give the
Evolution the power it
deserves, we have
equipped the Evolution
with twin brushless
drives. So that the power
can be translated into
thrust, the props are
directly mounted to the
motors, therefore no
gear boxes or
drive-shafts to sap the
power. A centrally
mounted rudder and
optimised hull shape
guarantee high
manoevrability.With these
attributes, the new
robbe Sea-Jet is best
prepared to take part in
the Evolution class of
the Sea-Jet
Cup.Specification:Length:
685 mmWidth: 240
mmHeight: 370 mmTotal
displacement: 2100 g
Manufacturer:
RobbeModel:Robbe Sea-Jet
Evolution (1-1266)
Availability: In Stock
£199.99
Available
-
Enjoy the relaxing and
fulfilling enjoyment of
wind driven boating with
the University Club. For
the purist there is no
better way than to judge
the wind, angle the sail
and take flight across
the water. With its
classic yacht design and
scale detailing the
University Club presents
beautifully both on the
water or on its special
display stand.Spec
Check:Full-Function
Digital
ProportionalLength
515mmWidth 120mmHeight
857mm120m RangeChangeable
crystalsTotal Sail Area -
9.7 dm2Requires 12 AA
pencells for TX and RX
Manufacturer: Hobby
EngineModel / Part No:
University Club Yacht
(HE0905)
Availability: In Stock
£74.99
Available
-
Deans MarineThe
"D" class
destroyers were typical
of the whole series of
successive classes from A
to I built for the R.N.
in the 1930's. In general
these were economy
designs and tended to be
smaller and less well
armed than destroyers of
other major foreign
powers. H.M.S. Daring was
commanded by Lord Louis
Mountbatten in 1934. She
was torpedoed by a U boat
on the 18th February 1940
off Duncansby Head
Scotland.Daring was
launched by Thornycroft
in 1932 on a Displ of
1.375 tons. Her main
weapons were 4x 4.7"
guns and 8 x 21in torpedo
tubes, with geared
turbines on 2 shafts
giving 36, 000 s.h.p. and
a top speed of 36 knots.
When placed along side
the V & W in our range,
this shows how the
destroyers progressed in
the 1920/30's.Details of
the kitScale 1/96 Length
1.02m Beam 107mm Sailing
weight 2.82kgsThis model
is based on a plated
glass fibre hull, with
the superstructure and
decks in 1mm plastic.
Vac-forms for the
funnels, boats, etc,
cast alloy main weapons
and close range armament.
To add the final crisp
finish to the model,
brass etchings are
supplied for all
stanchion, ladders etc.
A full set of
instructions, plus a
FULL SIZE PLAN are
included in this kit
along with stainless
steel propshafts,
proptubes and rudder.
This kit makes into a
superb model of this
classic British destroyer
and as with all the DEANS
range, has superb on the
water performance.
Manufacturer: Deans
MarineModel: HMS Daring
(428)
Availability: In Stock
£250.94
Available
-
The Volvo Ocean Race
(formerly the Round the
World Race) is an
international yacht race
around the world, held
evey four years. It is
legendary amongst sailing
fans and takes in all the
major oceans of the
world.The Killer Whales
scale Volvo Open class
model captures all the
details of the exciting
world of full size racing
yachts.Spec CheckLength:
960mmHeight:
1550mmFibreglass
hull2-channel radio and
rudder and winch servo
included 1.7m high
sailWinch servo
controlAdjustable side
stabalizersPlease note:
This model comes with all
parts supplied but
requires at least 6 hours
build time. Therefore we
only recommend this yacht
for the serious modeller.
Manufacturer: Hobby
EngineModel: (HE0913)
Availability: In Stock
£164.99
Available
-
This beautifully finished
model is supplied in
Ready-To-Run format with
included radio control
and 26cc pullstart petrol
engine – just fuel it
up and you're ready to
go! The fibreglass
composite hull and
cockpit is supplied
factory finished and
painted. Waterproof radio
boxes protect onboard
R/C. All screws and nuts
are stainless steel to
avoid corrosion.Includes
CNC aluminium alloy
rudders are fitted for
sharp handling and added
durability. Supplied with
a boat stand.
SpecificationLength:
1300mmHeight:
280mmWeight: 13.8Kg RTRIC
Engine: 26cc PetrolBeam:
380mm Manufacturer:
RipmaxPart / Stock No.:
B-VAN046B-GPR
Availability: In Stock
£384.99
Available
-
It's the ultimate R/C
pleasure cruise! Not only
does the Paradise come
withradio system already
installed, but even the
rigging has been done for
you.Factory-finished,
the model requires no
sanding or painting...
and becauseit's powered
by the breeze, you'll
need nothing more than a
few
ordinary"AA"
batteries to get your
voyage under way.•
Assembles quickly -
factory-finished, with
radio gear and
ballastinstalled•
Lightweight, strong
fibreglass hull arrives
beautifully
factory-finished•
Low-drag keel and boom
disconnect for easy
transportingSail for
pleasure - leave work
behind.....Required for
operation (Not
included):12 AA
batteries. Manuafcturer:
RipmaxPart / Stock No.:
Paradise Yacht RTS –
Orange (B-AQU901A6)
Availability: In Stock
£149.99
Available
-
Venom’s new electric
King of Shaves, Class 1,
34 inch scale racing
catamaran, officially
licensed by King of
Shaves® and accurately
replicates the 2006-2007
King of Shaves® Class 1
Powerboat. The Venom
electric C1 racing boat
King of Shaves has many
high performance
features, including a
scale fiberglass
composite catamaran hull
combined with twin Venom
60A Pro Marine brushless
speed controls and dual
Venom V380 Marine motors
turning 2880KV each. This
powerful combination
turns twin glass filled
nylon counter rotating
propellers through CNC
machined fully adjustable
Arneson style drives to
rocket the King to speeds
in excess of 40mph!King
of Shaves
Features:Fiberglass
Composite Hull with scale
King of Shaves
graphicsSecured top hatch
with pin and Neodymium
magnetsTwo water cooled
Venom 60A Pro Marine
Brushless Speed
ControlsTwo water cooled
Venom V380 2880KV
Brushless Motors with 4mm
shaftsTwo Arneson style
CNC machined aluminum
fully adjustable drives
with ball bearingsCNC
machined aluminum motor
mountsAluminum ESC and
servo mountsComposite
nylon counter rotating
propellersLaser cut and
sealed plywood battery
tray with integrated
receiver mountVR3T
Digital FM transmitter
and receiverLaser cut and
sealed plywood boat
standSpecifications:Length:
34" (86.4cm)Beam:
9.5" (24cm)Height:
4.5" (11.4cm)Overall
Height: 6.5"
(16.5cm)Weight: 4.5 lb
(2.04 kg)Chassis:
Hand-Laid Fiber
GlassMotor or Engine:
Brushless, Electric
Direct DriveRadio: Venom
VR3T 3-Ch FM Radio
TransmitterServos: (1)
Metal Gear High Torque
(VEN-1825)Requires
batteries for completion.
Manufacturer: VenomModel
/ Part No: King of Shaves
C1 Racing 34' RTR
Electric Boat (VEN1810)
Availability: In Stock
£399.99
Available
-
Deans MarineThis craft
was constructed by the
Vosper yard in 1938 as
the tender to the Royal
Yacht "Victoria and
Albert" and at the
time was the last word in
seakeeping qualities.She
was designed and
constructed as a triple
screw vessel and was
extensively tested by
Vospers in all sea
conditions. Legend has it
that she is one of the
finest small craft ever
constructed.The barge was
placed in store during
W.W.11 after which she
was refitted with more
modern engines and
automatic fire
extinguisher systems.In
1947 H.M.S. Vanguard
carried her for the Royal
tour of South Africa and
later the Royal Yacht
Brittannia was modified
to carry her on its
davits.The barge has
since been replaced by a
more modern craft in the
Royal Yacht and this
vessel again is in store
to be used for special
occasions until a
decision is made as to
her future.Deans Marine
wish to express their
thanks to Vosper
Thornycroft for the kind
assistance in the
research for this
kit.Details of the
kitScale 1/15 Length
762mm Beam 203mm Sailing
wieght 1.9kg This model
is constructed on a
glassfibre hull with the
chine strips and the deck
fender as part of the
hull moulding. The superb
hull lines of the
original Vosper design
have been faithfully
reproduced to give this
model the outstanding sea
keeping qualities of the
original vessel.The deck
is of 1/16th marine
whitewood ply, with a
novel method of
simulating the deck
planking.The complete
superstructure, the
cabin wells and the spray
dodger are in 1mm
vacformed plastic to give
fast assembly.To complete
this model a full set of
fittings in cast light
alloy and plastic are
supplied, along with
decals for the boat's
crest. To add the
finishing touch, sets of
standards for 3 members
of the Royal family, and
the board of Admiralty
are provided. A FULL SIZE
PLAN and comprehensive
instructions are included
to assist the modeller
with the construction of
this most attractive
model. Manufacturer:
Deans MarineModel:Royal
Barge (190)
Availability: In Stock
£200.34
Available
-
Level: ExpertModel
Number:
BB560Manufacturer:
Billing Boats The
well-trained model
builder will find many
challenges - and many
hours of intensive
occupation - with these
large and impressive
models. These sets
require lots of dexterity
and a perfect technique.
And you’ll be on your
own with a lot of the
details in the models.The
Calypso was built in the
USA in 1942 as a
minesweeper. She was
bought in 1950 by
Jacques-Yves Cousteau,
and after extensive
changes and modifications
has become a fully
equipped ocean research
vessel, complete with
observation chamber in
the stern, oval diving
bell, Galaezzi diving
chamber, inflatable boat
for shallow waters,
helicopter and much other
submarine equipment.
Length 42 m, tonnage 360
tons, speed 12
knots.Specification:Height
- 33Length – 94Width
– 17Laser Cut
PartsScale: 1:45ABS
HullModel suitable for
R/C.
Availability: In Stock
£319.00
Available
-
Stir up the pond with
this completly and ready
to run round nose
"thunder boat"
hydroplane. A retaining
pond or any nearby small
body of water is a great
place to run!Includes:•
2-Channel AquaCraft FM
pistol grip radio•
Waterproof receiver•
Mini servo• 380-size
water-cooled motor•
Waterproof electronic
speed control• 1100mAh
NiMH battery• 12V DC
chargerSpecification
Width: 203mm (8 in)
Length: 444mm (17.5 in)
Height: 126mm (5 in)
Weight: 522g (18.4
oz)Manufacturer:
RipmaxStock / Part no.:
B-AQUB16
Availability: In Stock
£94.99
Available
-
This new addition to the
Compact kit range is to
the slightly larger scale
of 1/72 to give more
working room in the model
and to make the kits more
suitable for the railway
modeler.The details and
construction methods used
in the craft are the same
as in all the kits in the
Compact Kit range.The
craft is based on one of
the tugs used by the
Dutch navy in Den Helder
dockyard, The tugs are
constructed by the DELTA
shipyard for the Navy.The
ships are called the
“Linge” Regge Hunze
Rotbe and the Gowe. The
one this model is based
on a craft called the
“GOWE” The ship has
two powerful diesel
engines driving twin
screws and are capable of
handling the largets of
ships in confined waters
She is based on a
standard private design
and many have been
constructed and sold for
private service.The color
scheme shown on this
model is fictional as the
variations and colors
used in the full size
craft are to numerous to
mention.Details of the
kitScale 1/72Length
320mmBeam 115mmSailing
weight 857g Manufacturer:
Deans MarineModel: Mastif
(135)
Availability: In Stock
£89.74
Available
-
Level: ExperiencedModel
Number:
BB526Manufacturer:
Billing BoatsThis level
is for those who have
tried to build a model
ship before, or perhaps
one of plastic. These
models also have a simple
construction, though you
will meet a number of
’challenges’ on the
way!The Andrea Gail, an
un-inspected commercial
fishing vessel departed
Gloucester Harbour,
Massachusetts, September
20, 1991 with six
crewmembers on board. The
crew intended to make a
fishing trip for
swordfish in the area of
the Grand Banks of
Newfoundland, Canada.
The vessel began its
return voyage to
Gloucester, MA. on
October 26-27, 1991. On
October 30, 1991, the
vessel was reported
overdue by the owner,
Mr. Robert Brown. An
extensive air and sea
search was conducted
utilizing U.S. and
Canadian Cape Cod MA.
However, the search did
not locate the vessel or
any of the crewmembers.
The vessel and six
crewmembers remain
missing and are presumed
lost at sea in a major
storm, referred to as
the “Perfect Storm”
by a meteorologist and
made famous by Sebastian
Junger’s book (the book
was later turned into a
Hollywood movie). The
sword fishermen were
Captain William
“Billy” Tyne, Robert
“Bobby” Shatford of
Gloucester, Dale Murphy
and Michael “Bugsy”
Moran of Bradenton Beach
FL., David “Sully”
Sullivan and Alfred
Pierre of New York
City.Specifications:Height
- 55Length – 72Width
– 21Laser Cut
PartsScale: 1:30Plastic
HullModel suitable for
R/C.
Availability: In Stock
£200.00
Available
-
Off shore powerboat
racing is a high risk and
expensive sport. With the
Sea Knight you can enjoy
the thrills and spills
that these beasts provide
but with safe in the
knowledge that the only
risk you might endure is
too much fun. Easy to use
and drive, the scale,
race livered, twin
cockpit design is sleek
and fast as it cuts
through the water. Spec
Check:Full-Function
Digital ProportionalWater
cooled motorLength
525mmWidth 150mmHeight
130mmScale 1:25120m
RangeChangeable
crystals9.2v 600mah Ni-Cd
battery includedAC
Charger included
Manufacturer: Hobby
EngineModel / Part No:
Sea Knight (HE0906)
Availability: In Stock
£69.99
Available
-
Mini Rio
(B-AQUB15)Perfect even
for small ponds, the
Mini Rio makes it easy to
make waves. It's
low-priced and
ready-to-run, with
sturdy ABS construction
and a watertight,
low-maintenance design.
There's plenty of sizzle
in the Superboat styling
to turn serious racers'
heads...plus a Dual Wedge
rudder that delivers
precise turning power for
an untouchable edge!•
Ready-to-run, no
building required• Easy
to manoeuvre for
realistic, non-stop
racing action• Durably
designed for low
maintenance and long run
timesIncludes: 2-channel
AquaCraft FM pistol grip
radio with waterproof
receiver and 1 mini
servo; 380-size
water-cooled motor;
waterproof electronic
speed control; 1100mAh
NiMH battery; 12V DC
charger Requires: 8
"AA" batteries
for the
transmitterIncludes a
high-quality AquaCraft
2-channel FM radio.
Converts easily for left-
or right-hand use.
Proportional throttle and
steering. Audible low
battery alarm. Steering
trim control
knob.Assembled and
complete with:380-size
water-cooled
motorElectronic speed
control1100mAh NiMH
battery12V DC peak
chargerPre-applied decals
Specification Width: 4.75
in (108 mm) Length: 16 in
(406 mm) Height: 3.25 in
(82 mm) Manufacturer:
RipmaxModel: Mini Rio
(B-AQUB15)
Availability: In Stock
£86.99
Available
-
Beautifully crafted 1:10
scale radio controlled
model kit of Art Ashby's
famous 266 class
hydroplane.The model is
made from 3mm (1/8")
plywood frames and 0.8mm
(1/32") plywood
decking and also features
a vac formed
cowl.Designed to run on
a. 05 or brushless motor
system, this kit also
includes the running pack
which features rudder
set, turn fin, drive
shaft, stuffing tube,
motor to shaft coupler,
prop, prop nuts, strut,
antenna mount and
mounting hardware.Scale:
1:10Length: 635mm
(25")Beam: 280mm
(11")Vinyl decals
are not includedModel
Suitable for R/C.
Manufacturer: Osbourne
Model KitsModel: Miss
Canadiana (1:10 Scale Inc
Drive Kit) (OSB-2505)
Availability: In Stock
£133.05
Available
-
There's a right tool for
every job - and when the
job is diving straight
into offshore action,
the only tool you need is
the Hammer RTR. No
assembly or finishing is
needed and all the
on-board electronics come
already installed. It's
an easy way to break into
R/C boating... and a rush
for experienced skippers,
too!•Radio and drive
equipment come already
installed from the rudder
servo and
reverse-equipped
electronic speed control
to the water-cooled, 550
size electric motor•
The waterproof radio
compartment features a
screw down cover that
allows easy access to the
on-board radio gear•
Realistic deep vee racer
looks -complete with twin
cockpits -add to the
excitement• Done
carving into the current
for the day? Admire the
Hammer at home on its
supplied display stand!t
home on its supplied
display stand!Required
for operation (Not
included):8 AA batteries,
6~7 cell battery and
charger. Specification
Electric Motor: 550 Size
Beam: 220mm Length: 24 in
(610 mm) Manufacturer:
RipmaxModel: Nitro Hammer
RTR – Blue (B-AQUB25A2)
Availability: In Stock
£124.99
Available
-
Deans MarineThe Rix
Harrier was constructed
by the Yorkshire dry-dock
company in 1979 as the
Merchant ship WIB. She
was renamed the Breydon
Enterprise. Her
propulsion was by Holland
Roe machinery.In 1996 she
was purchased by T & S
Rix company of Hull and
converted to a bunkering
tanker for service in
Hull docks.She was
re-engined with two
caterpillar 1036 diesels
driving podded propellors
with a s.h.p. on each
prop of 480 H.P. giving a
service speed of 9 knots.
Auxillary power supply is
by Cummins diesels.She
now has a deadweight of
1009 tons, gross tonnage
is 572 and nett tonnage
0f 354 tons.The Rix
Harrier can be seen
servicing larger ships in
and around Hull docks,
her and her near sister
have been seen Details of
the kitScale 1/50 Length
915mm Beam 195mm Sailing
weight 8.5.kgs The model
of the M.V RIX HARRIER is
constructed on a
glassfibre hull with
bulwarks and freeing
ports moulded into the
hull. The decks and
superstructure are in 1mm
&. 5mm computer generated
printed plastic. Ships
inflatable and assorted
other fittings are cast
in acrylic resin for
extremely sharp and
accurate detailing. The
H.I.A.B. crane is a kit
in its own right cats in
plastic and white
metal.Cast metal
stanchions, and deck
fittings add the truly
professional touch to
this hard working
merchant ship model. The
complicated deck piping
is assembled from styrene
plastic tube and
completed with all the
valves, wheels and vents
in metal, and using a 3
colour printed layout on
the tank deck.Propeller
tubes, fitted with
oiling points and
stainless steel shafts
are included together
with a comprehensive
instruction book and a
FULL SIZE plan. Full
details are supplied for
the fitting of motors,
nicads and radio
equipment. Manufacturer:
Deans MarineModel: Rix
Harrier (341)
Availability: In Stock
£288.43
Available
-
The Canadian One Design
racing mono hull was one
of the most popular
racing boats in
Canada.Designed in the
1950's, its simple build
and low cost attracted
the average working
person onto the racing
scene.Kit uses all laser
cut parts and detailed
instructions take you
through the simple build
process.Kit also includes
the running pack which
features motor to shaft
coupler, thrust bearing,
drive shaft, stuffing
tube, prop, prop nut,
rudder and mounting
hardware. Scale:
1:8Length: 559mm
(22")Beam: 229mm
(9")Suitable for RC.
Manufacturer: Osbourne
Model KitsModel: Canadian
One Design (1:8 Scale Inc
Drive Kit) (OSB-2509)
Availability: In Stock
£133.05
Available
-
Scale: 1/20, Length
950mmBeam: 250mmWeight:
7kg (R.A.M.B. kit )The
R.A.M.B. type of kits is
a new venture in the
Deans Marine range of
kits. The format of these
kits is to choose a model
that contains some very
complicated construction
parts, and do all the
very difficult parts as a
completed assembly.This
kit come with a moulded
hi-impact styrene hull
and deck, props shafts,
rudders and all linkages
are pre -installed, the
deck is fitted and the
hull is painted, the
superstructure is
assembled and painted,
the window frames and
glazing are pre-fitted,
The mast assembly is
constructed from soldered
brass tube/rod and is a
complete item, with a
folding top mast, all
lights and Ariel's are
pre-fitted, this is also
painted, all that is
required to do, is bolt
the mast to the rear of
the cabin and fit the top
mast, the HI-HAB crane
is pre-assembled and only
requires fitting in place
along with the pre-made
sea raider inflatable,
all railings are again
pre-soldered and only
require fittings to the
pre-drilled holes in the
deck. Stainless steel
prop-shafts are included
in the kit along with 2
handed brass propellers,
with recommendation for
motors, couplings,
speed controllers,
alternative power units
and propellers. An
instruction book with
assembly details plus
hints/tips, there is
also a set of colour
decals included to
complete this attractive
and colourful model of
the latest high speed
Police Launch in service
in Holland.Fitted with
the recommended twin
motors and multi channel
radio gear this
outstandingly fast and
manoeuvrable model is a
joy to drive.
Manufacturer: Deans
MarineModel / Part No:
STAN P 47 Dutch Police
Launch
Availability: In Stock
£334.99
Available
-
Never before has it been
easier to try your hand
at the exciting world of
r/c electric boats.
FastWave’s new budget,
entry level CubShark
provides everything you
need to be out on the
water in no time. Just
add AA batteries to the
transmitter and receiver
box, charge the 7.2v
battery and away you go.
This may be an entry
level boat, but you will
be churning up the water
and watching the
Cubshark’s sleek hull
cut through the surface
just like the real
thing.Features:2-channel
radio installed Separate
3kg servos and receiver
units Radio box Water
cooled 540 motor Quick
release motor mount
Lightweight ABS moulded
hull design with hatch
Wall charger and 7.2v
battery included
Specifications:Length:
650mm Width: 200mm
Height: 140mm Weight:
1270g (approx) FW0101
Cubshark EP 650mm
Ready-To-Run Racing Boat
- Yellow Manufacturer:
Fast WaveModel / Part No:
Cubshark EP 650mm
(FW0101)
Availability: In Stock
£77.99
Available
-
Level: ExperiencedModel
number:
BB592Manufacturer:
Billing BoatsThis level
is for those who have
tried to build a model
ship before, or perhaps
one of plastic. These
models also have a simple
construction, though you
will meet a number of
’challenges’ on the
way!The Zwarte Zee was
built in 1963 at J. & K.
Smit’s Scheepswerven
N.V. in Kinderdijk,
Holland. Length 77.50 m,
breadth 12.35 m, draught
6.90 m and gross tonnage
1, 539 tons. Driven by
two Smit-M.A.N. turbo
diesel engines yielding
9, 000 HP. These machines
drive a single propeller
shaft through Vulcan
fluid clutches and
reduction gears. When a
fast manoeuver is
necessary, one of the
engines can drive
forwards, the other
reverse. Speed 18
knots.Specification:Height
– 37Length – 90Width
– 15.5Laser Cut
PartsScale: 1:90Plastic
HullModel suitable for
R/C.
Availability: In Stock
£197.95
Available
-
Flash by name, Flash by
nature. Pound through the
wake as your trail your
buddy in an attempt to
catch him coming into the
next turn. High octane
powerboat racing is just
a battery charge away,
The rest is up to
you.Spec
Check:Full-Function
Digital ProportionalWater
cooled motorLength
525mmWidth 150mmHeight
130mmScale 1:25120m
RangeChangeable
crystals9.2v 600mah Ni-Cd
battery includedAC
Charger
includedManufacturer:
Hobby EngineModel / Part
No: Flash Speedboat
(HE0904)
Availability: In Stock
£69.99
Available
-
Mimic the rich and famous
with the Saint Tropez
cruiser yacht. In reality
millionaires host parties
and drink champagne
aboard, but you can
bring Monte Carlo to your
local pool or canal,
with this highly detailed
cruiser. Deck detail is
so good you will feel
like you are onboard,
enjoy the party. No need
to worry about space in
the mariner here, just
charge and go!Spec Check:
Full-Function Digital
ProportionalLength
670mmWidth 215mmHeight
400mmScale 1:20120m
RangeChangeable
crystals9.2v 600mah Ni-Cd
battery includedAC
Charger included
Manufacturer: Hobby
EngineModel / Part No
:Saint Tropez Cruiser
(HE0902 )
Availability: In Stock
£134.99
Available
-
Deans MarineThis model of
the HUDSON RIVER has been
added to a range of ships
from this famous company
to make a collection in
the same livery. With the
assistance of the Hudson
Steamship Co we introduce
the second of their fleet
and although she looks
similar to the Hudson
Sound she is a
considerably larger and
more modern vessel. She
was built by the Ailsa
Shipbuilding Co, at
Troon and was completed
in 1949 on a gross
tonnage of 3, 128 tons
and capable of a cruising
speed of 11 knots. The
Hudson River had the
reputation of being the
last of the large coal
burning colliers on the
English coast. In the
late 1960's she was
converted to oil burning
as good quality bunkering
coal was becoming hard to
obtain. The noticeable
lack of derricks was part
of her design since coal
in that period was
unloaded by dockside
grabs and this gave them
clearance. For those who
wish to modify the kit,
the derricks were
refitted in her later
life when she went on to
normal cargo traffic.
Details of the kitScale
1/96 Length 1.09m Beam
146mm Sailing weight
6.1kgThe model of this
fine lined and graceful
merchant ship is based on
a plated and detailed
glassfibre hull with all
freeing ports moulded in.
Decks and the
superstructure are in
printed 1mm plastic for
ease of construction.For
those difficult items a
sheet of vac-formings in.
75mm plastic is included
to construct items such
as ships boats, funnel
and hatch covers. When
constructed the completed
model captures all the
grace of the prototype
which is thought by many
to be one of the most
elegant of merchant
ships. Manufacturer:
Deans MarineModel: Hudson
River (331)
Availability: In Stock
£249.52
Available
-
Deans MarineThe last sea
going steam tug of the
Netherlands.The FURIE was
built in 1916 by
G.H.Bodewen at
Martenshoek as the
"Bodewes 6" and
sold to Holmen Bruke in
Norrkoping Sweden when
she was renamed
"Holmen 3"The
ship changed hands again
in 1969 to A Akerlund in
Stockholm and was named
"Holvick", she
was used to tow timber
rafts to the sawmills. In
1976 she was purchased by
AVRO television to play
the leading part in the
T.V. series
"Hollands
Glorie" after the
book of the same name.
She changed hands again
in 1977 to Handels Mij.In
1978 she was purchased by
the Foundation Hollands
Glorie in Maassluis whose
aim is to preserve the
ship in her original
condition. The ship is
now in Maasluis and open
to the public where she
gives frequent trips on
the river and is part of
the Tug Museum in
Maasluis.Details of the
kitScale 1/48 Length
698mm Beam 140mm Sailing
weight 3.3kgThe model is
based on a glassfibre
hull with full plating,
freeing ports, bulwarks
and port detail moulded
into the hull. Computer
generated plastic printed
in 6 colours is used for
the decks and
superstructure to give
quick and crisp assembly.
Vacformed plastic
mouldings supply the
ships boat hulls, engine
casings, skylights,
motor mount and trays for
the nicad batteries. A
full set of fittings in
cast light alloy and
plastic give the
finishing touch to the
model adding the vital
clutter that is so much
part of the
"TUG" appeal.
As in all of the Deans
kits a set of running
gear is included,
consisting of the
propshaft, tiller and
full instructions keyed
to a FULL SIZE plan to
assist in the
construction of the
model.The sailing
qualities of the Furie
are excellent, as is the
standard for all the kits
in the range.Painting
instructions are part of
the construction notes
with tips for using the
latest car spray ACRYLIC
paint which gives a fast
and hard wearing finish.
Manufacturer: Deans
MarineModel: SS Furie
(263)
Availability: In Stock
£204.26
Available
-
The RC SYSTEM "Blue
Whale " power boat
has it all, stunning
racing lines with the
performance to match.
Underneath the deck of
this boat is a water
cooled 540 motor coupled
to an adjustable outboard
drive system. Also under
deck is the electronics,
all safley housed in a
water proof box...just
incase. The boat is
powered by a 7.2v racing
pack, which is included
along with the mains
charger. The Blue Whale
is the boat to have so
lets go ride some
waves!!Features:Fully
Assembled Pistol grip
radio supplied All
electronics supplied and
fitted Water proof radio
box Water cooled motor
Outboard drive system
7.2v Battery & Charger
supplied Crash resistant
hull Length: 920mm Width:
255mm Motor: Water cooled
540 Manufacturer: R/C
SystemsModel: Blue Whale
Power Boat (KL120001)
Availability: In Stock
£129.99
Available
-
This vessel was built in
1965 at the N.V.
Scheepswerven in
Millingen, Holland, and
called
"Maasbank". In
September 1977 it was
renamed
"Banckert". The
Maasbank served for 12
years in the Western part
of Holland. Length 32.75
m, breadth 7, 85 m,
draught 3, 40 m. The
engine yields 1800
HP.Scale 1:50 Length 65cm
Beam 16cm Height: 42cm
The Billing Boats kit of
the Banckert features:
ABS hull, wooden
superstructure and decks,
hull and deck fittings
in brass and/or plastic,
ramin mast, rigging cord
in various sizes,
propshafts, rudders and
propellers. Includes Full
size plan sheets and an
instruction manual with
English Text. Billing
Boats Level:
ExperiencedThis model is
suitable for Radio
Control Manufacturer:
Billing BoatsModel: BB516
Availability: In Stock
£157.00
Available
-
The Utility Runabout is a
1:12 scale model of the
classic Canadian design
runabouts popular during
the 1940's and 1950's.
The model features a
planked mahogany hull,
laser cut parts, top
quality select wood and
detailed hardware
package.Kit also includes
the running pack which
features motor to shaft
coupler, thrust bearing,
drive shaft, stuffing
tube, prop, prop nut,
rudder and mounting
hardware.Scale:
1:12Length: 406mm
(16")Beam: 140mm
(5.5")Model Suitable
for R/C. Manufacturer:
Osbourne Model KitsModel:
Utility Runabout (1:12
Scale Inc Drive
Kit)(OSB-2503)
Availability: In Stock
£123.40
Available
-
Recommended Age: 14+CHINA
TEAM, as the first
syndicate ever to carry
the Chinese Flag in the
history of the Americas
Cup.The boat of CHINA
TEAM is called Longtze,
which means son of the
dragon. In the 32nd
America’s Cup, the
Chinese dragon which is
the only Asian racing
yacht participate in this
competition and reconnect
with their ancient and
prestigious maritime
tradition.Requires:AssembleyRadio
EquipmentFeatures:Quality
Factory Pre-painted
Fibreglass HullHigh
Performance Plus “Tear
Resist” Racing
SailsLight yet Rigid
Extruded Aluminium Booms
and MasterStabilized Low
Drag Hydrodynamic Steel
BallastBlack Anodized
Aluminium Stand
IncludedOfficially
Licensed by China
TeamProduct
SpecificationLength
993mmBeam 172mmMast
Height 306mmOverall
Height 1700mmOverall
Weight 7.7lb.
Manufacturer:THUNDER
TIGERModel: TEAM CHINA 1M
Racing Yacht (TT5564)
Availability: In Stock
£204.99
Available
-
Take the boat out for a
spin with the Sport Club
fast electric. The Sport
Club captures the classic
powerboat runabout that
is so often the play toy
of fun loving boat fans
worldwide. Spec
Check:Full-Function
Digital
ProportionalLength
510mmWidth 150mmHeight
130mmScale 1:25120m
RangeChangeable
crystals9.2v 600mah Ni-Cd
battery includedAC
Charger
includedManufacturer:
Hobby EngineModel / Part
No: Sport Club Speed Boat
(HE0903)
Availability: In Stock
£69.99
Available
-
Earthrace 1300 RTR w/26cc
Petrol (B-VAN060A-GPR).
This beautifully finished
model is supplied in
Ready-To-Run format with
included radio control
and 26cc pullstart petrol
engine – just fuel it
up and you're ready to
go! The fibreglass
composite hull and
cockpit is supplied
factory finished and
painted. Waterproof radio
boxes protect onboard
R/C. All screws and nuts
are stainless steel to
avoid corrosion.Includes
CNC aluminium alloy
rudders are fitted for
sharp handling and added
durability. Supplied with
a boat stand.
Specification:Length:
1400mmHeight:
340mmWeight: 15.78Kg
RTRIC Engine: 26cc
PetrolBeam: 700mm
Manufacturer:
RipmaxModel: Earthrace
1300 RTR w/26cc Petrol
(B-VAN060A-GPR)
Availability: In Stock
£514.99
Available
-
Introducing the Joysway
Off-Shore Warrior
electric brushless boat!
The Joysway boats are
perfect for your local
pond, river or model
boating area. Seriously
fast, easy to control
and great fun... but
don't be fooled into
thinking they are toys,
because they aren't! With
an extremely durable
fiberglass hull, water
cooled brushless motor
and ESC, installed
steering servo and
precision CNC machined
anodised hardware these
are serious competitors -
They even come with a
free boat stand for
maintenance! All
preassembled, including
the 2.4GHz Radio just add
a suitable 3S LiPo
battery of your choice to
get running. Available in
different colours to suit
your personal taste and
allowing you to race your
friends! Product
Specification:Length:
450mmWeight: 550gRadio
System: 3 Ch.
(Inc.)Electric Motor:
3000KV Brushless
(Inc.)LiPo: 3S1P 11.1V
2500mAh 25CS/C Rec: 30A
(Inc.)Width: 125mm Just
watch the video and
you'll be sold!
Manufacturer:
JoyswayModel / Part No:
Offshore Warrior RTR -
Black 2.4GHz
(B-JS-9301BR/2-4G)
Availability: In Stock
£144.99
Available
-
The hull is of GRP fully
detailed on the exterior
with plating, double
riveting and strakes. The
whole package is complete
with CNC cut plywood,
printed overlays, funnel
material, hatch cover,
moulded ships boats,
mast and boom material,
cargo material, rigging
cord, transfers,
detailed drawings and
instruction book, crew
members and all cast
white metal fittings to
complete.Scale:
1:48Length: 863mmBeam:
152mmThe SS Talacre is a
typical single hatch
coaster used in the coal
trade of a type that was
found by the hundreds
around the coast of the
U.K. in the golden era of
steam. Designed for Point
of Ayr Collieries by
Crichton, Thompson & Co
Ltd., of London she was
built by Crabtree &Co.,
of Great Yarmouth in
1917. Talacre was named
after a small village
near the colliery.
Talacre was finally
scraped in 1959 by the
Hammond Lane Foundry in
Dublin. Realism leaps out
of the completed model,
as if a turn of a valve
will start the anchor
windlass or the cargo
winch clattering away and
the lagged steam pipes to
begin steaming and drying
out.This model is
supplied as a kit and
will require assembly,
model suitable for R/C.
MANUFACTURER:
Caldercraft ClassicModel
/ Part No: 7005
Availability: In Stock
£258.95
Available
-
A GRP hull with moulded
external detail forms the
basis of the model plus
styrene funnel, carley
float, and boat
mouldings. Superstructure
and deck are of CNC cut
ply with a printed deck
overlay. Complete with
all necessary rod,
dowel, wire etc. and a
comprehensive cast white
metal fittings pack allow
the builder to create
their own
masterpiece.Scale:
1:48Length: 933mmBeam:
165mmOne of eight vessels
named after the Knights
of the Round Table and
which were to be known as
the Round Table Class of
minesweeper. Based on a
well proven hull design
of a trawler 'The Star of
Orkney' built by Hall
Russell of Aberdeen. Our
kit is based on one built
by Hall Russell & Co.
Ltd. and given the
pennant no T241. All
eight of the Round Table
Class minesweepers
survived the war and were
sold out of service and
conserved to conventional
steam trawlers. Every
inch of this model is
stamped with realism and
is a feast of detail.This
model is supplied as a
kit and will require
assembly, model suitable
for R/C.
MANUFACTURER:
Caldercraft ClassicModel
/ Part No: 7011
Availability: In Stock
£299.95
Available
-
This kit brings marine
model kits into the 21st
century, with seven
sheets of CNC cut ply
including panelling for
the various cabins and
screen printed overlays
where necessary. Over 300
brass etched fittings and
over 750 white metal
fittings (forward anchor
windlass has over 40
parts alone) make this
the most detailed
Caldercraft kit to-date.
Funnels and hull are
moulded in GRP with
plating detail. All wood,
dowel, rod, rigging
cord and ships boats to
complete the kit are
provided.Scale:
1:48Length: 1165mmBeam:
230mmDue to the depletion
of the naval tug fleet
during the 1914 - 1918
war, the Royal Navy
decided to replace the
older tugs with several
classes of purpose built
naval tugs. Largest and
most powerful of these
were the 'Resolve' class.
Six were built in this
class between 1917 and
1919. Resolve was fitted
with a quick firing
12pdr. gun for defence
when on convoy duty or
coastal tows during war
time, (the Resolve can
also be painted with a
war time colour scheme).
Resolve remained in the
Royal Navy until 1950
when she was sold to
messers James Scott and
Co. Ltd. for breaking
up.This model is supplied
as a kit and will require
assembly, model suitable
for R/C.
MANUFACTURER:
Caldercraft ClassicModel
/ Part No: 7024
Availability: In Stock
£464.95
Available
-
The hull is a fully
detailed GRP moulding.
Superstructure and deck
are CNC cut ply with
printed ply overlays.
Ships boats are styrene
mouldings. Bow and stern
decorative scroll work,
ships name, saloon
windows and door
furniture are etched
brass. Over 800 fittings
are cast from high
quality white metal (with
34 for the anchor
windlass alone). All wood
dowel, rod, wire and
cordage are supplied to
make this a model to be
proud of.Scale:
1:35Length: 1140mmBeam:
180mmSchaarhorn was built
in 1908 and used as the
Hamburg state Yacht. In
1973 Schaarhorn was sold
and brought to the U.K.
In 1990 she was sold to a
preservation society in
Hamburg and fully
restored. It is now used
for pleasure cruises. The
model was built using
original drawings as well
as photographs taken of
the restored vessel.This
model is supplied as a
kit and will require
assembly, model suitable
for R/C.
MANUFACTURER:
Caldercraft ClassicModel
/ Part No: 7021
Availability: In Stock
£345.96
Available
-
Kit contains all
necessary mouldings,
printed overlays, CNC
cut wood parts, drawings
and diagrams for
assembly. There are over
200 white metal fittings
and it is in their
authenticity and feel
that the charm of this
finished model shows.
Awarded a gold medal at
the Nuremburg Toy Fair of
1984, it was a first for
any British kit
manufacturer and a first
for any marine model kit
from around the world.
This kit also fills a
corner for the static
modeller looking for a
cased model that is a
little different. Crew
member figures are
included.Part No.:
7001Scale: 1:32Length:
660mmBeam: 178mmThis is a
representative model of a
typical small coaster
from the Western Isles of
Scotland, known to all
ship lovers as a 'Clyde
Puffer'. The GRP hull
carries full external
detail, riveting,
strakes etc.This model is
supplied as a kit and
will require assembly,
model suitable for R/C.
MANUFACTURER:
Caldercraft ClassicModel:
(7001) Northlight
Availability: In Stock
£258.95
Available
-
Model hull is fully
detailed, as is the two
part superstructure and
funnel. All these parts
are moulded in GRP. Deck
and bridge are ply, with
a printed ply overlay.
Fittings are cast white
metal. The superstructure
is easily removable to
allow easy access to the
hull making this model
ideal for steam
propulsion. The kit is
available in either
single or twin screw
versions.Scale:
1:32Length: 1105mmBeam:
292mmThe Marie Felling
was built by Earls of
Hall and launched in
1928. Designed by the
same team as the Imara,
she was a Crown Colony
Contracts vessel and
judging by the margin
notes of the contract,
gave rise to the many
improvements incorporated
in the later Imara,
especially with regard to
accommodation. Both were
designed for the same
type of harbour work.
From the deck layout up,
the Marie Felling is an
unusual and appealing
vessel. The single
lifeboat carried cross
ship on the sub deck atop
the forward saloon and
the raised bridge on
stilts, not to mention
the cross passage through
the single
superstructure, the
massive plain funnel and
open funnel deck all
combine to give this
vessel a unique
charm.This model is
supplied as a kit and
will require assembly,
model suitable for R/C.
MANUFACTURER:
Caldercraft ClassicModel
/ Part No: 7003
Availability: In Stock
£409.95
Available
-
The hull is a fully
detailed GRP moulding
with CNC cut ply deck and
superstructure. A full
set of white metal
fittings, dowel, tube,
rod etc. to complete the
model as illustrated. The
Milford Star benefits
greatly from the added
paraphernalia of nets,
buoys and ropes. Internal
lighting can be added to
give additional realism
to those late night
Summer and Autumn
sailings.Scale:
1:48Length: 933mmBeam:
165mmThis small
attractive side trawler,
so typical of the
thirties and forties was
a conversion to a peace
time trawler from one of
eight Round Table Class
minesweepers built around
1943 for war service. The
design is based on the
hull lines of Star of
Orkney, a trawler built
in 1936.This model is
supplied as a kit and
will require assembly,
model suitable for R/C.
MANUFACTURER:
Caldercraft ClassicModel
/ Part No: 7019
Availability: In Stock
£215.95
Available
-
The hull is of GRP with
full plating and rivet
detail on the exterior.
Ships boat and funnel are
styrene mouldings. The
remainder of the model
consists of die-cut ply
parts, printed deck and
wheelhouse overlays and
all associated materials
that are required.
Instruction booklet and
drawings, dowel, wire,
rod, chain, rigging
cord, transfers, prop
and prop shaft make up
our usual kit package
topped off with a
comprehensive set of
white metal fittings.
Drop the side gratings
and watch your pilot grab
the hand rails and step
back aboard.Scale:
1:32Length: 864mmBeam:
203mmA working boat with
the lines and elegance of
a yacht this Clyde Pilot
cutter of the 60's - 70's
era can be summed up as a
'boaters' boat. It looks
like a modern motor
vessel designed and built
by an Edwardian yard and
it has to be seen on the
water to be appreciated
to the full.This model is
supplied as a kit and
will require assembly,
model suitable for R/C.
MANUFACTURER:
Caldercraft Classic Model
/ Part No: 7009
Availability: In Stock
£275.95
Available
-
Although impossible to
describe in detail the
features of a model with
over 1, 400 parts, the
the following are the
most outstanding. Hull,
main and rear deckhouse
and funnel are moulded in
GRP with all rivet and
plating detail faithfully
reproduced. All decks,
wheelhouse etc. are CNC
cut from high quality
Birch ply. Deck overlays
are pre-printed with
planking detail. Almost
800 fittings manufactured
in high grade alloy of
superb quality, with
many unique features too
numerous to list. It even
includes the pantry,
sink, jugs, cups,
saucers, plates, tables
and chairs for the
saloon. Lifeboats are
moulded in styrene with
separate interior
mouldings and all
furniture included.Scale:
1:32Length: 1105mmBeam:
292mmTypical of many of
the period 'Imara' was a
twin screw harbour tug,
built to a Crown Colonies
contract for delivery to
Dares-Salaam. Thereafter
she had a colourful
history, ultimately
entering Royal Naval
service where she was
renamed 'Perseverance'.A
comprehensive instruction
book including a detailed
history of the full sized
vessel and two highly
detailed construction
drawings. Single and twin
screw versions of the
hull are available. The
twin twin screw version
is true to scale, and
the single screw version
allows for easy
installation of a steam
plant, both versions
look superb on the
water.This model is
supplied as a kit and
will require assembly,
model suitable for R/C.
MANUFACTURER:
Caldercraft ClassicModel
Part No: 7012
Availability: In Stock
£479.95
Available
-
Introducing the Joysway
Off-Shore Warrior
electric brushless boat!
The Joysway boats are
perfect for your local
pond, river or model
boating area. Seriously
fast, easy to control
and great fun... but
don't be fooled into
thinking they are toys,
because they aren't! With
an extremely durable
fiberglass hull, water
cooled brushless motor
and ESC, installed
steering servo and
precision CNC machined
anodised hardware these
are serious competitors -
They even come with a
free boat stand for
maintenance! All
preassembled, including
the 2.4GHz Radio just add
a suitable 3S LiPo
battery of your choice to
get running. Available in
different colours to suit
your personal taste and
allowing you to race your
friends! Product
Specification:Length:
450mmWeight: 550gRadio
System: 3 Ch.
(Inc.)Electric Motor:
3000KV Brushless
(Inc.)LiPo: 3S1P 11.1V
2500mAh 25CS/C Rec: 30A
(Inc.)Width: 125mm Just
watch the video and
you'll be sold!
Manufacturer:
JoyswayModel / Part No:
Offshore Warrior RTR -
Yell/2.4GHz
(B-JS-9301YR/2-4G)
Availability: In Stock
£144.99
Available
-
Introducing the Joysway
Off-Shore Warrior
electric brushless boat!
The Joysway boats are
perfect for your local
pond, river or model
boating area. Seriously
fast, easy to control
and great fun... but
don't be fooled into
thinking they are toys,
because they aren't!With
an extremely durable
fiberglass hull, water
cooled brushless motor
and ESC, installed
steering servo and
precision CNC machined
anodised hardware these
are serious competitors -
They even come with a
free boat stand for
maintenance! All
preassembled, including
the 2.4GHz Radio just add
a suitable 3S LiPo
battery of your choice to
get running. Available in
different colours to suit
your personal taste and
allowing you to race your
friends! Product
Specification:Length:
450mmWeight: 550gRadio
System: 3 Ch.
(Inc.)Electric Motor:
3000KV Brushless
(Inc.)LiPo: 3S1P 11.1V
2500mAh 25CS/C Rec: 30A
(Inc.)Width: 125mm Just
watch the video and
you'll be
sold!Manufacturer:
JoyswayModel / Part No:
Offshore Warrior RTR -
Red 2.4GHz
(B-JS-9301RR/2-4G)
Availability: In Stock
£144.99
Available
-
Introducing the Joysway
Sea Rider electric
brushless boat! The
Joysway boats are perfect
for your local pond,
river or model boating
area. Seriously fast,
easy to control and great
fun... but don't be
fooled into thinking they
are toys, because they
aren't! With an extremely
durable fiberglass hull,
water cooled brushless
motor and ESC, installed
steering servo and
precision CNC machined
anodised hardware these
are serious competitors -
They even come with a
free boat stand for
maintenance! All
preassembled, including
the 2.4GHz Radio just add
a suitable 3S LiPo
battery of your choice to
get running. Available in
different colours to suit
your personal taste and
allowing you to race your
friends! Product
Specification:Length:
450mmWeight: 600gRadio
System: 3 Ch.
(Inc.)Electric Motor:
3000KV Brushless
(Inc.)LiPo: 3S1P 11.1V
2500mAh 25C (Rec.)S/C
Rec: 30A (Inc.)Width:
130mm Manufacturer:
JoyswayModel / Part No:
Offshore Sea Rider RTR -
Red 2.4GHz
(B-JS-9302RR/2-4G)
Availability: In Stock
£144.99
Available
-
The Volvo Ocean Race
(formerly the Round the
World Race) is an
international yacht race
around the world, held
every four years. It is
legendary amongst sailing
fans and takes in all the
major oceans of the
world.Hobby Engine have
teamed up with Volvo to
product this officially
licensed scale Volvo Open
class model that captures
all the details of the
exciting world of full
size racing yachts.Spec
Check:Length:
960mmHeight:
1550mmFibreglass
hull2-channel radio and
rudder and winch servo
included1.7m high
sailWinch servo
controlAdjustable side
stabalizersPlease note:
This model comes with all
parts supplied but
requires at least 6 hours
build time. Therefore we
only recommend this yacht
for the serious modeller.
Manufacturer: Hobby
EngineModel: (HE0912)
Availability: In Stock
£179.99
Available
-
Victory 720, Scale
1:200, Length 620mm.This
new victory kit, the
fourth in the victory
range, offers a splendid
kit in a size that will
grace any room with ease.
It has all the latest
laser cutting & etching
including all the gun
ports, decking and
gratings, all being pre
cut. We have included in
the kit the wooden/copper
coloured laser sheet for
a more realistic finish.
This kit makes up into a
fine model of the
flagship to Admiral Lord
Nelson during the battle
of Trafalgar on 21st
October 1805 and is the
most famous of the great
British fighting ships.
She can be visited at
Portsmouth dockyard where
she is preserved for
posterity.A plank on
frame construction, the
kit contains:- Building
plans with general
details Scale 1:200
Length 620mm
Manufacturer: Mantua
ModelModel / Part No:
Mantua HMS Victory.
Nelson's Flagship (720)
Availability: In Stock
£110.00
Available
-
Kit includes: All
required timber; CNC
manufactured pre-cut and
pre-profiled components;
All windows glazed and
framed; 6 glazed and
framed portholes;
Integral engine mount;
Integral R/C platform;
17” stainless steel
propshaft (M4); Coupling
unit; Hull matched 12V
low drain, high torque,
electric motor (suitable
for up to 24V); Hull
matched 75mm, 3 bladed,
cast solid brass prop
(M4); Large brass rudder;
Searchlight; 6 fairleads;
Ships wheel; 2 cleats; 1
red side light; 1 green
side light; 1 two tone
horn; 2 jackstaffs;
Anchor; Comprehensive
instruction manual and
scale plan sheets.Sea
Queen is 46" long
and based on the lines of
a typical early 60's
ocean going cabin
cruiser.The hull matched
motor and prop give
superb scale speed and
handling characteristics
on just 12V.This model is
supplied as a kit and
will require assembly,
model suitable for
R/C.Part No.: 2000Scale:
n/aLength: 1170mmBeam:
370mmManufacturer:
Aerokits
Availability: In Stock
£154.95
Available
-
The Volvo Ocean Race
(formerly the Round the
World Race) is an
international yacht race
around the world, held
evey four years. It is
legendary amongst sailing
fans and takes in all the
major oceans of the
world.The Killer Whales
scale Volvo Open class
model captures all the
details of the exciting
world of full size racing
yachts. Spec CheckLength:
960mmHeight:
1550mmFibreglass
hull2-channel radio and
rudder and winch servo
included 1.7m high
sailWinch servo
controlAdjustable side
stabalizers Please note:
This model comes with all
parts supplied but
requires at least 6 hours
build time. Therefore we
only recommend this yacht
for the serious modeller.
MANUFACTURER: Hobby
EngineModel / Part No:
Killer Whales Yacht
(HE0913)
Availability: In Stock
£169.99
Available
-
Marlin Cruiser RTR
(B-CBM0003)As soon as you
open the box, you can
see that the Marlin is a
great looking cruiser.
Get it on the water and
you'll also discover its
terrific performance!
With Compass Boat Models'
usual attention to
detail, the Marlin comes
completely factory
assembled with a powerful
540 class motor, two
channel radio with
electronic speed
controller pre-installed
and a 7.2v rechargeable
battery and mains
charger. Everything you
need except for a set of
AA cells for the
transmitter. Marlin's
tough, pre-formed ABS
hull has a large hatch
for easy access to the
battery and running gear
and it is supplied
complete with a handy
display stand.
Specification Electric
Motor: 540 Class Beam:
190mm Length: 675mm
Height:
260mmManufacturer:
RipmaxPart / Stock No.:
Marlin Cruiser RTR
(B-CBM0003)
Availability: In Stock
£94.99
Available
-
Years ago, the only
models to offer this
level of realism were
expensive kits that
required years of
experience and months of
work. But with the
Atlantic Harbor Tugboat,
it takes only minutes to
be under way in a vessel
that would look
completely natural in any
harbour setting. On the
water, on the shore, or
resting at home on its
custom display stand,
the Atlantic Harbor
Tugboat is a showpiece
that any modeller would
be proud to own.The hull
and cabin are one-piece
designs and all details
are factory applied.
Finishing is either
complete or unnecessary.
The fibreglass hull is
already painted and
supplied in a gloss
finish for easy
maintenance. Modelled
with scale details taken
from real working tugs,
from bitts on the deck to
working lights on the
mast!Required for
operation:(Not included):
6 or 7 cell NiCad or NiMH
battery, Charger, 10 AA
Batteries. Specification
Beam: 9.8 in (250 mm)
Length: 30.3 in (770 mm)
Height: 19 in (485 mm)
Manufacturer:
RipmaxModel: Atlantic
Harbor Tug Boat RTR
(B-AQU959)
Availability: In Stock
£239.99
Available
-
Venus R/C Sailing Yacht
880. ABS hull, metal
ballast, printed & ready
to use sails, carbon
fibre masts, all laser
cut parts, metal
fittings Instruction book
with very detailed
drawings. Scale 1:20
Length 940mm Beam 245mm
Mast Height 1240mm
Manufacturer: Mantua
ModelModel / Part No: 880
Availability: In Stock
£199.00
Available
-
Level: Advanced
BeginnerModel Number:
BB700Manufacturer:
Billing BoatsOnce
you’ve built a few
models, you’ll
probably find the sets in
this category well within
reach. Some of the more
detailed work on these
models, however, is
left up to you.Built in
l93l at the Frederikshavn
Shipyard in Denmark, St.
Canute sailed for many
years as a tugboat and
icebreaker in the Odense
harbour under its
original name St. Knud.
St. Canute is 28 m long,
7.6 m broad, draws 3.80
m.Specification:Height -
42Length - 56Width –
15.5Laser Cut PartsScale:
1:50Model Suitable for
R/C.
Availability: In Stock
£124.00
Available
-
Level:
ExperiencedManufacturer:
Billing BoatsModel
Number: BB476This level
is for those who have
tried to build a model
ship before, or perhaps
one of plastic. These
models also have a simple
construction, though you
will meet a number of
’challenges’ on the
way!A typical trawler
from the North Sea,
built in 1970 at an
English shipyard. The
model kit is based on the
original ship
drawings.Specification:Height
- 43Length – 81Width
– 19Laser Cut
PartsScale: 1:50Model
suitable for R/C.
Availability: In Stock
£267.00
Available
-
Experience the
exhilaration of fast
off-shore power boats
with the Swordfish from
Hobbyengine. It’s sleek
and streamlined design
provides exceptional
speed and performance
across the water and with
its high end,
competition inspired
fibreglass hull it can
tackle the toughest
conditions and accept
power upgrades. Accessed
through the removable
cockpit hatch an
electronic speed control
provides proportional
power while the metal
propeller and rudder
offer sharp handling and
durability.
FeaturesPre-assembled
ready-to-runIncludes
2-channel radio550
watercooled motorDigital
proportional electronic
speed controlFibreglass
moulded hull9.6v 2000mAH
Ni-MH battery
includedMetal propeller
and rudder
assemblyStandSize 1070mm
x 255mm x 195mmRequires
chargerManufacturer:
Hobby EngineModel / Part
No: Swordfish RTR Fast
Electric Fibreglass Boat
(HE0911)
Availability: In Stock
£154.99
Available
-
The Volvo Ocean Race
(formerly the Round the
World Race) is an
international yacht race
around the world, held
every four years. It is
legendary amongst sailing
fans and takes in all the
major oceans of the
world.Hobby Engine have
teamed up with Volvo to
product this officially
licensed scale Volvo Open
class model that captures
all the details of the
exciting world of full
size racing yachts.Spec
Check:Length:
960mmHeight:
1550mmFibreglass
hull2-channel radio and
rudder and winch servo
included1.7m high
sailWinch servo
controlAdjustable side
stabalizers Please note:
This model comes with all
parts supplied but
requires at least 6 hours
build time. Therefore we
only recommend this yacht
for the serious modeller.
Manufacturer: Hobby
EngineModel / Part No:
Life at the Extreme'
Volvo Open 70 Class Yacht
(HE0912)
Availability: In Stock
£192.99
Available
-
Modelled after the racing
runabouts popular on
lakes all over North
America during the
1950's.Kit includes laser
cut parts plus the
running pack which
features motor to shaft
coupler, thrust bearing,
drive shaft, stuffing
tube, prop, prop nut,
rudder and mounting
hardware.Scale:
1:12Length: 406mm
(16")Beam: 152mm
(6")Suitable for RC.
Manufacturer: Osbourne
Model KitsModel:
Gentleman's Racer (1:12
Scale Inc Drive Kit)
Availability: In Stock
£123.40
Available
-
Introducing a famous
America’s Cup yacht,
the ETNZ (Emirates Team
Of New Zealand)Nearly
20.000 man hours and over
six months to build this
yacht, the ETNZ is now
ready to change the 2007
regatta. Thunder Tiger is
authorized to replicate
the ETNZ in a 1M model
with fibreglass and the
very latest finishing
technologies to make this
yacht just like the real
thing.Get equipped and
experience the the thrill
of sailing America’s
Cup yacht.Features:Pre
painted fibreglass
hull"Tear
resist" racing
sailsAluminum booms and
masts.Low drag stell
ballastStand
includedSpecifications:Length:
993mmBeam: 172mmMast
height: 1306mmOverall
height: 1700mmOverall
weight: 3.5kg
Manufacturer: THUNDER
TIGER Model: 1M ETNZ
RACING YACHT (TT5555)
Availability: In Stock
£199.99
Available
-
High Class Ready-To-Run
speed boat with brushless
engine and Futaba 2.4 GHz
remote control
technology.There are many
ready-to-run racing
boats. The robbe Rapido
is unique. The
development and
production of the model
are Made in Germany, the
remote control system is
from FUTUBA and the model
is driven by a
state-of-the-art
brushless motor. A truly
High Class model for
racers looking for
something
special.Specification:Length:
490 mmWidth: 230
mmHeight: 130 mmTotal
displacement: 1000
gManufacturer:
RobbeModel: Robbe Rapido
BL-powered 2, 4 GHz RTR
(1-1192)
Availability: In Stock
£276.99
Available
-
Fast ready-to-run motor
yacht with 2.4 GHz remote
controlThe large Pacific
Queen with its powerful
motor is the ideal motor
yacht for all model
skippers who don´t want
to spend a lot of time
buidling, but want to
set sail on their first
trip straight away. This
completely
pre-assembledmodel is
ready to run after
loading the battery. The
Pacific Queen set
includes a modern 2.4 GHz
remote control unit and
full motorisation
including a high-quality
robbe speed controller.
Its excellent sailing
properties and its smart
design make this the
complete ready-to-run
package.Specification:Length:
850 mmWidth: 245
mmHeight: 265 mmTotal
displacement: 1600
gManufacturer:
RobbeModel:Robbe Pacific
Queen 2, 4 GHz RTR
(1-1136)
Availability: In Stock
£221.99
Available
-
Recommended Age:
14+Approved once again by
World Champion Jorgen
Andersson - the
second-generation top
performance F-1 tunnel
hull is now
available.35mm longer
than the previous Bandit
and with improved
cutting. Available in
three stunning and bright
schemes, pre-finished by
factory craftsmen.
Perfect platform for the
Thunder Tiger 3.5cc
outboard marine engine.
This advanced design has
been optimized for speed
and handling.This version
is supplied as a combo
with PRO21 Outboard
engine and radio
equipment.Requires:Nitro
FuelStarting
EquipmentFeatures:High
Performance Tunnel Hull
designApproved by World
Champion Jorgen
AnderssonLight yet Rigid
Full Fibreglass Hull
w/Vinyl Hull
StandPre-painted w/ Cool
Scheme DesignQuick-Remove
& Attach Upper
DeckUser-FriendlyNo Need
to Add Weight or
BalanceProduct
SpecificationLength
848mmBeam 293mmWeight
1950gPart No:
TT5210F7YManufacturer:
THUNDER TIGER
Availability: In Stock
£344.99
Available
-
Radio-controlled model
sailing yacht to 1:10
scaleThe Smaragd
(Emerald) is a large
model which can be sailed
even in quite strong
winds, and in its basic
version can be controlled
with a simple two-channel
radio control system. The
carefully optimised
arrangement of the sail
area allows the boat to
achieve the maximum speed
possible from the hull
design even in moderate
winds and on all
headings. If you enjoy
making use of exotic
auxiliary functions, you
may fit an optional Genoa
or Blister sail in place
of the standard jib. The
setting of the Genoa
(enlarged foresail) is
adjusted by means of an
additional sailwinch,
and it provides
advantages above all in
light to moderate winds
on all tacks. The blister
is a foresail with a
generous belly, sewn in
bands, whose spherical
shape develops
considerable thrust in
light to moderate
winds.In contrast to a
spinnaker, which
normally has to be
lowered when the boat is
luffing, the blister can
be left deployed, as it
can be used in a similar
fashion to the Genoa when
its luff is close-hauled
via transmitter
control.OptionalStandard
Sail area: approx. 80 dm2
Sail area with Genoa:
approx. 94 dm2 Sail area
with Blister: approx. 94
dm2Specification:Length:
1380 mmWidth: 360
mmHeight: 2200 mmScale:
1:10Total displacement:
12000 gBallast weight:
8000 gMast height: 1800
mmDraught: 300.00 mm
Manufacturer: RobbeModel:
Robbe Smaragd (1-1076)
Availability: In Stock
£341.99
Available
-
Experience for yourself
the fascination of fast
off-shore racing boats
with our model of the
Lightning 46.If complex
construction and long
building times are not
your idea of fun, then
this racing boat is just
the job for you. No
drilling, sanding or
painting is required,
and you can have the
Lightning 46 ready for
its maiden run in just a
few hours.The hull
features an integral deck
and is supplied with all
holes and openings
pre-cut. The hull design
makes the model capable
of high speeds even in
rough water. The
direct-drive power system
is quickly installed and
is designed for a
low-cost 7-cell
rapid-charge drive
battery. The impressively
comprehensive decal sheet
eliminates the need for
painting the model. In
short, everything has
been done to get you off
to a fast start in your
first off-shore
race.Specification:Length:
700 mmWidth: 140
mmWeight: 1200 g
Manufacturer: RobbeModel:
Lightning 46 (1-1018)
Availability: In Stock
£114.99
Available
-
Recommended Age:
14+Approved once again by
World Champion Jorgen
Andersson - the
second-generation top
performance F-1 tunnel
hull is now
available.35mm longer
than the previous Bandit
and with improved
cutting. Available in
three stunning and bright
schemes, pre-finished by
factory craftsmen.
Perfect platform for the
Thunder Tiger 3.5cc
outboard marine engine.
This advanced design has
been optimized for speed
and handling.This version
is supplied as a combo
with PRO21 Outboard
engine and radio
equipment.Requires:Nitro
FuelStarting
EquipmentFeatures:High
Performance Tunnel Hull
designApproved by World
Champion Jorgen
AnderssonLight yet Rigid
Full Fibreglass Hull
w/Vinyl Hull
StandPre-painted w/ Cool
Scheme DesignQuick-Remove
& Attach Upper
DeckUser-FriendlyNo Need
to Add Weight or
BalanceProduct
SpecificationLength
848mmBeam 293mmWeight
1950gPart No:
TT5210F7GManufacturer:
THUNDER TIGER
Availability: In Stock
£344.99
Available
-
Radio-controlled
one-metre sailing boat.
An ideal beginner´s boat
in the international
one-metre classThe
Windstar meets the rules
of the international
one-metre boat class. Its
outstanding features are
its fine sailing
qualities and simple,
well-balanced handling.A
special feature is the
availability of different
sail suits for strong,
moderate and light wind
conditions. The model is
supplied with a white
pigmented GRP hull. For
competition work an
optional non-pigmented
hull can be
used.Specification:Length:
1000 mmWidth: 195 mmTotal
displacement: 4000
gBallast weight: 2100
gManufacturer:
RobbeModel: Robbe
Windstar (1-1087)
Availability: In Stock
£221.99
Available
-
Recommended Age:
14+Approved once again by
World Champion Jorgen
Andersson - the
second-generation top
performance F-1 tunnel
hull is now
available.35mm longer
than the previous Bandit
and with improved
cutting. Available in
three stunning and bright
schemes, pre-finished by
factory craftsmen.
Perfect platform for the
Thunder Tiger 3.5cc
outboard marine engine.
This advanced design has
been optimized for speed
and handling.This version
is supplied as a combo
with PRO21 Outboard
engine and radio
equipment.Requires:Nitro
FuelStarting
EquipmentFeatures:High
Performance Tunnel Hull
designApproved by World
Champion Jorgen
AnderssonLight yet Rigid
Full Fibreglass Hull
w/Vinyl Hull
StandPre-painted w/ Cool
Scheme DesignQuick-Remove
& Attach Upper
DeckUser-FriendlyNo Need
to Add Weight or
BalanceProduct
SpecificationLength
848mmBeam 293mmWeight
1950gPart No:
TT5210F7OManufacturer:
THUNDER TIGER
Availability: In Stock
£344.99
Available
-
Radio-controlled model
sailing boat with GRP
hull and double
mainsailThe Double Dragon
is an extremely compact
sailing boat which is
easy to transport even
when fully rigged.
Quality materials and a
high level of
pre-fabrication ensure
that the model goes
together quickly. Its
sailing qualities when
luffing and sailing with
free wind are similar to
those of a conventional
sailing boat, but it is
when sailing before the
wind that the Double
Dragon shows off its
speciality - the double
mainsail opens up, and
the enlarged sail area
provides enormous forward
thrust.Specification:Length:
600 mmWidth: 200
mmHeight: 1050 mmTotal
displacement: 1600
gBallast weight: 800
gMast height: 760 mmSail
area: 39.30 dm2
Manufacturer: RobbeModel:
Robbe Double Dragon
(1-1183)
Availability: In Stock
£159.99
Available
-
Semi-scale model of a
luxury motor yacht to
1:15 scaleFittings set
and power set
includedJust like the
full-size prototype the
Najade features a large,
roomy cabin, an imposing
flying bridge and a lusty
power system to ensure an
impressive top speed. The
propulsion system is
based on a ROXXY 3656-06
brushless motor driving
the propeller direct via
the propeller shaft; the
entire power system is
included in the kit.
Construction of this
superb model is hastened
by many pre-fabricated
parts, including the
glazing which is moulded
in clear brown-tinted
material. The fittings
set is supplied as
standard, and contains
all the detail items
required to give the
Najade a perfect scale
appearance.Specification:Length:
960 mmWidth: 300 mmScale:
1:15Total displacement:
3600 gManufacturer:
RobbeModel: Robbe Najade
(1-1164)
Availability: In Stock
£221.99
Available
-
CHINA TEAM, as the first
syndicate ever to carry
the Chinese Flag in the
history of the
America’s Cup. The boat
of CHINA TEAM is called
‘Longtze’, which
means son of the dragon.
In the 32nd America’s
Cup, the Chinese dragon
which is the only Asian
racing yacht participate
in this competition and
reconnect with their
ancient and prestigious
maritime tradition.
Product
Specifications:Length:
39”(993mm)Beam:
6.75”(172mm)Mast
Height:
51.4”(1306mm)Overall
Height:
67”(1700mm)Overall
Weight: 3.5 Kg(7.7
lb.)Features:Quality
Factory Pre-painted
Fiberglass Hull High
Performance Plus “Tear
Resist” Racing
SailsLight yet Rigid
Extruded Aluminum Booms
and MasterStabilized Low
Drag Hydrodynamic Steel
BallastBlack Anodized
Aluminum Stand
IncludedOfficially
Licensed by China Team
Manufacturer: Thunder
Tiger Model / Part No:
Sailing Yacht Americas
Cup Yacht (TT5546)
Availability: In Stock
£199.99
Available
-
Impressive and dramatic
details make the Odyssey
II stand out as a
painstakingly reproduced
scale model. Beauty and
grace are abundant in the
confident lines of this
fine vessel, from the
sails and deck all the
way down to the keel. You
will be proud to take
this beauty to the lake
or display it at home or
in the office.Key
Features:One-Peice blow
molded hull and deckScale
fittingsAluminum
mastStand
includedSpecifications:Length:
610mmSail Area:
17.3dm2Overall Weight:
1.8kgBeam: 200mmMast
Height: 790mmOverall
Height: 1050mm
Manufacturer: Thunder
Tiger Model / Part No:
Sailing Yacht Odyssey II
(TT5553)
Availability: In Stock
£79.99
Available
-
Radio-controlled scale
sounding boat to 1:25
scale, matching the
Norderney survey shipThe
Möwe is the ideal
complement to the
Norderney survey ship,
as it can be carried on
board the mother ship,
but also run
independently. However,
equipped with a simple
2-channel system it can
also be operated as a
stand-alone model. The
boat can even be run
without radio
control.Specification:Length:
260 mmWidth: 105 mmScale:
1:25Total displacement:
300 gManufacturer:
RobbeModel: Robe Sounding
Boat Moewe (1-1037)
Availability: In Stock
£35.99
Available
-
Radio-controlled
semi-scale model of a
mega-yacht to 1:25
scaleThe long, slim hull
of the San Diego looks
simply fantastic on the
water. Fitted out with
two powerful 700-size
electric motors, with
direct drive to a pair of
contra-rotating
surface-piercing
propellers, the San
Diego accelerates
strongly and soon comes
up onto the step and
planes across the water.
A pair of swivelling Navy
Speed power systems
provide excellent
straight running
characteristics combined
with good manoeuvrability
even in choppy water. The
optional fittings set
contains all you need to
fit out your model with
all the luxurious
equipment featured by the
full-size boat.Crew
figures not included in
the
kit.Specification:Length:
1270 mmWidth: 250
mmScale: 1:25Total
displacement: 5000
gManufacturer:
RobbeModel: San Diego
(1-1045)
Availability: In Stock
£187.99
Available
-
Radio-controlled model of
a working ship with
salvage crane to 1:25
scaleFittings set and
motor includedIn many
harbours of the world you
will find examples of the
full-size Paula III.
These industrious vessels
are constantly shunting
in and out of port to
carry out their work in
the coastal regions,
around the estuaries of
large rivers and in the
harbour approaches.
Manoeuvrable and very
fast for their size,
these working ships are
employed for all manner
of tasks. Amongst their
duties are retrieving and
laying sea warnings and
markers, clearing away
minor obstacles in
shipping lanes and
transporting special
equipment required for
marine research.This
wide-ranging versatility
gives the imaginative
modeller almost unlimited
scope for completing and
operating the boat.The
Paula III is the ideal
model for the beginner
and advanced model
builder alike, but is
likely to appeal to the
traditional modeller who
enjoys "real"
construction work. We
recommend the use of a
lead-acid battery which
gives extremely long
running times. The
salvage crane can lower
various loads over the
model´s stern and
retrieve them again.Crew
figures and buoy set not
included in the
kit.Specification:Length:
710 mmWidth: 215 mmScale:
1:25Total displacement:
2500 g Manufacturer:
RobbeModel: Robbe Paula
III (1-1159)
Availability: In Stock
£104.99
Available
-
Radio-controlled model of
an off-shore racing boat
to 1:25 scaleIt streaks
by like an arrow -
there’s just no other
word for the Magin One.
This is a model for the
true speed freak.
Developed to incorporate
the latest findings of
the acknowledged experts
in the Mono II racing
boat class, this sleek
racer features a
single-step hull, and
its distinctive design
makes it a focal point at
any lake-side.Powered by
a Power 710 electric
motor (available in a
separate power set) and
12 NC cells the model
reached speeds of more
than 40 km/hr during the
test programme. This is a
model for drivers with
strong nerves!
Specification:Length: 850
mmWidth: 200 mmHeight:
200 mmScale: 1:25Total
displacement: 2500 g
Manufacturer: RobbeModel:
Robbe Magin One (1-1174)
Availability: In Stock
£96.99
Available
-
These beautiful boats
come with pre-painted
fiberglass Hull, scale
rigging, fishing gear
and other details found
only on Thunder Tiger
scale boats. First thing
you will notice is the
silky smooth fiberglass
hull, with built in ASC
(Anti Sinking Cabins) for
even greater reliability
in high seas. Every
captain will be impressed
in the fact that servos,
and forward/backward 50A
ESC. are all factory
installed. Another great
feature is the 4.5A 6V
Pb-Acid sealed battery
that gives hours
enjoyment.Features:Factory
painted and pre-assembly
scale fishing
boatFiberglass hull with
anti-sinking cabins
designRequires only a few
minutes of asssembly for
of Mast and RiggingScale
detailing includes
fishing gear, laser cut
deck and wooden
decorationsFoward and
backward 50 Amps ESC and
standard servo are
factory installed4.5 Amps
6v Pb-Acid sealed battery
and wall charger
includedSpecifications:Lenght:
550mm / 21.65 in.Beam:
205mm / 8.1 in.Height:
470mm / 18.5 in.Motor:
550 included
Manufacturer: Thunder
Tiger Model / Part No:
Fishing Boats KingFisher
(TT5301F3GA3)
Availability: In Stock
£199.99
Available
-
These beautiful boats
come with pre-painted
fiberglass Hull, scale
rigging, fishing gear
and other details found
only on Thunder Tiger
scale boats. First thing
you will notice is the
silky smooth fiberglass
hull, with built in ASC
(Anti Sinking Cabins) for
even greater reliability
in high seas. Every
captain will be impressed
in the fact that servos,
and forward/backward 50A
ESC. are all factory
installed. Another great
feature is the 4.5A 6V
Pb-Acid sealed battery
that gives hours
enjoyment.Features:Factory
painted and pre-assembly
scale fishing
boatFiberglass hull with
anti-sinking cabins
designRequires only a few
minutes of asssembly for
of Mast and RiggingScale
detailing includes
fishing gear, laser cut
deck and wooden
decorationsFoward and
backward 50 Amps ESC and
standard servo are
factory installed4.5 Amps
6v Pb-Acid sealed battery
and wall charger
includedSpecifications:Lenght:
600mm / 23.6 in.Beam:
220mm / 8.7 in.Height:
530mm / 20.9 in.Motor:
550 includedManufacturer:
Thunder Tiger Model /
Part No: Fishing Boat
Catherine (TT5300F3A3)
Availability: In Stock
£199.99
Available
-
True-to-life almost ready
to run model of a river
surveyor´s boat in 1:20
scaleThe original of the
Bussard was used on the
waterways in the Ruhr
area by the water
management authorities to
carry out water checks
for environmental
purposes, to measure
current speeds, to check
and maintain channel
markings and for many
other different jobs. The
model Size, appearance
and features from the
original provide the
ideal template for the
almost completely
assembled model of the
Bussard. In the case of
the Bussard, almost
completely assembled
means that the boat has
been factory assembled to
the point that only some
finishing work, such as
applying decals and
accessories and building
in the remote control
components need to be
done by the owner. Even
without any prior
experience of modelling,
it is possible to get the
Bussard ready to go over
a weekend. Thanks to the
large-scale coloured
decals which are part of
the set, there is no
need to paint this
model.Specification:Length:
900 mmWidth: 210
mmHeight: 280 mmTotal
displacement: 2500
gManufacturer:
RobbeModel: Robbe
Stromaufsichtsboot
Bussard ARTR (1-1193)
Availability: In Stock
£261.99
Available
-
Almost ready to sail
model yacht "Made in
Germany"You would
like a sporty and fast
model boat, where
quality and service
count, and where one can
easily obtain spares
parts – then decide on
"Made in
Germany".Development
and Manufacture of Sea
Diamond takes place at
robbe Modellsport in
Germany. All parts
originate from Robbe. And
to be able to get started
quickly in the new Hobby,
we have taken care of
all the hard work for
you. Hull and deck are
bonded in the factory,
steering, drive unit
with 600 size power-motor
and mountings for the
radio gear are fully
installed.The new
Sea-Diamond caption only
has install his choice of
radio and affix the
decals – and off you
go.Specification:Length:
645 mmWidth: 220
mmHeight: 190 mmTotal
displacement: 1400
gManufacturer:
RobbeModel: Robbe Sea
Diamond (1-1127)
Availability: In Stock
£364.99
Available
-
Radio-controlled motor
yacht to 1:20 scaleThe
robbe San Remo is our
model of an American
luxury cabin cruiser.
With its elegant
appearance and dynamic
presence on the water you
can be sure to be the
centre of attention at
the lakeside. The model
is equipped with the
efficient robbe Navy
Speed drive system which
guarantees a high top
speed, and with its
surface-piercing
propeller it quickly
accelerates the motor
yacht to maximum speed.
Running times of around
10 minutes are possible,
depending on power system
and battery capacity.
Construction is very
simple, based on a
larger number of
pre-fabricated
components, while the
comprehensive building
instructions make the San
Remo a strong
recommendation for the
beginner to boat
modelling.Specification:Length:
700 mmWidth: 220 mmScale:
1:20Total displacement:
1500 g Manufacturer:
RobbeModel: Robbe San
Remo Motor Yacht (1-1089)
Availability: In Stock
£66.99
Available
-
Semi-scale model of a
pilot boat to 1: 25
scaleNo container ship or
oil tanker would ever
make it into port
undamaged, or pass
through the narrow
shipping lanes, if they
were not guided by an
experienced pilot. Pilots
have to be able to reach
the ship concerned
without delay, so they
travel aboard fast,
manoeuvrable pilot boats,
which are capable of
running alongside the
large vessels even in the
roughest of seas.If you
understand the
fascination of these
boats, then the Maris II
is just the right model
for you, as it is an
unusual vessel which is
not to be found at every
boating lake. A simple
but effective power
system, fine detailing
and an interesting colour
scheme make our pilot
boat an affordable
beginner´s or second
model.Specification:Length:
610 mmWidth: 185
mmHeight: 360 mmTotal
displacement: 1800
gManufacturer:
RobbeModel: Robbe Pilot
Cutter Boat Maris II
(1-1063)
Availability: In Stock
£104.99
Available
-
Radio-controlled
semi-scale model of a
two-masted schooner to
1:20 scaleThe original
vessel was built in 1935
and is a 28 m long
gaff-rigged schooner. The
special sail arrangement
on the boat makes her
stand out from the more
familiar ship types of
her time, and for this
reason she is of
particular interest to
the modeller. With a sail
area of just on one
square metre,
distributed over several
separate sails, and a
streamlined hull with its
characteristic extended
keel, this imposing
model offers an excellent
performance and good
manoeuvring capability.
Although the boat is
quite heavy, the draught
of the Atlantis is
relatively small, so
shallow in-shore waters
present no problem. The
multiple sails give the
operator plenty of scope
for trimming the model to
suit different wind
speeds just by lowering
and setting individual
sails. For light winds a
Genoa is available. The
boat features an
ingenious tensioning
mechanism which means
that only one screw has
to be slackened on each
mast when it is time to
transport the
"Atlantis". All
the shroud settings can
be left
unchanged.OptionalStandard
sail area: approx. 85.5
dm2Sail area with Genoa:
approx. 114
dm2Specification:Length:
1380 mmWidth: 340
mmHeight: 1730 mmScale:
1:20Total displacement:
17500 gBallast weight:
11000 gMast height: 1420
mmDraught: 240.00
mmManufacturer:
RobbeModel: Robbe
Atlantis 2-Mast Schooner
(1-1130)
Availability: In Stock
£399.99
Available
-
Radio controlled
semi-scale model of a
harbour tug to 1:50
scaleAt the design stage
of this model we
concentrated on scale
fidelity and lovingly
reproduced detail
features. A working,
fixed fire monitor is
included, mounted on the
lower mast platform. The
Neptun’s power system
is based on a swivelling
Kort nozzle for extreme
manoeuvrability, and the
vessel makes light work
of tricky towing
manoeuvres in tight
situations. The towing
hook can be opened and
closed by remote
control.Specification:Length:
570 mmWidth: 175 mmScale:
1:50Total displacement:
2500 gManufacturer:
RobbeModel: Robbe Neptun
(1-1030)
Availability: In Stock
£122.99
Available
-
Competition version of
this fast Off-shore
racing boatThe Magin One
has been a racing boat in
the robbe model boat
product range for over
eight years. This model
has been very successful
in Mono-racing boat
competitions for several
seasons, particularly in
the S 14/S 12/MS 2 basic
class, During this year
some modifications to the
original model were
developed and tested. The
result of this reworking
is the Magin One Black
Race Edition. In order to
increase the top speed to
around 70 kph we modified
the base of the hull,
the drive train and the
rudder system, as well
as the steering fin.
Unlike the
"old" Magin the
Race Edition has its
entire drive train
without the E-motor in
the set contents. So the
future pilot of the Magin
One Black has three
engine options, all
based on the recommended
lithium polymer battery
with 4S with minimum
4400mAh: - Standard 700
size brush motor, which
can run the Magin One
Black at around 60kph in
racing boat
classS14/S12/MS2basic-
brushless Roxxy 3656/06,
to reach almost 70km/h
with extended running
time. This configuration
was also entered in
competition class Mono 2
in 2009- brushless Roxxy
3650/06 for total speed
freaks, to go faster
than 70kph and to test
the limits of this
modified
modelSpecification:Length:
820 mmWidth: 200
mmHeight: 185 mmTotal
displacement: 2000 g
Manufacturer: RobbeModel:
Robbe Magin One Black -
Race Edition (1-1191)
Availability: In Stock
£194.99
Denmark