United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Large Scale
Available
-
Off road, rough road
action is ever-popular,
so if you're looking for
a vehicle to suit, FG's
range of buggies, race
and monster trucks are
sure to please!Supplied
factory assembled and
ready to run with a
powerful and torquey
Zenoah 26cc pullstart
petrol engine and Futaba
40MHz radio.Built on a
tough 4mm angled
countersunk alloy chassis
with double wishbone
suspension front and
rear, coupled to four
oil filled shock
absorbers to soak up the
worst off-road
conditions, these
machines lap up the worst
conditions you can throw
at them! For long life
and smooth running, all
rotating parts are
ballraced and the rear
gears and diff gears are
case hardened for longer
life. Close fitting body
shells and guards ensure
that the transmission and
other chassis parts are
protected from dust and
dirt.Marder buggy
variants feature ABS body
shells and wings with
included decals, whilst
the Leopard Race, Baja
Buggies and Beetles
feature polycarbonate
body shells and wings.The
included Zenoah 26cc
pullstart engine runs on
an economical two stroke
petrol/oil (25:1) mix.
With their large volume
petrol tanks, you have
around 45 minutes of
driving fun per fill with
these superb off roaders!
Specification Wheel Base:
475mm Width: 420mm
Length: 690mm Height:
270mm Manufacturer:
RipmaxModel /Part No:
Marder OFF ROAD Buggy RTR
w/26cc (READY TO RUN WITH
RADIO)(C-FG06000R)
Availability: In Stock
£769.99
Available
-
The new Off-Road Beetle
by FG guarantees a lot of
driving fun, and
additionally this model
is a visual eye-catcher.
Equipped with a 4-wheel
drive and the low-profile
knobbed tires this model
is perfectly prepared for
every terrain.The
Off-Road Beetle is almost
identical in construction
with the FG Sportsline
4WD Monster models.Same
as all FG Buggies the
Beetle is equipped with a
powerful 26cc combustion
engine and is therefore
also aggressive and
powerful in jumping.
Secondary the 4-wheel
drive grants the model
the maximum drive power
and highest fun factor on
every surface and in all
curves.SpecificationLength:
730mmHeight: 290mmWheel
Base: 500mmPetrol Engine:
26cc (Inc.)Width: 480mm
Manufacturer: Model:
Off-Road Beetle 4WD ARR
(Clear)26cc (C-FG58050)
Availability: In Stock
£799.99
Available
-
With the FG Leopard Race
we have created a
reasonable Competition
Buggy. The Leopard Race
Buggy has already won
several competitions,
amongst others the German
Championship in 2000 and
2001, in 2002 it became
second.This new
constructed Buggy has its
centre of gravity on the
rear axle, this improves
the traction when
accelerating out of
curves on the one hand
and on the other it
improves the driving
performance on rutty
tracks through relieving
the front axle. An
extended wheelbase cares
for optimal track
stability which reduces a
shifting of the vehicle
on uneven ground to a
minimum.Straight 4mm
alloy chassis with
lateral edge and
countersunk srew heads.
Double wishbones at front
and rear axle. King pin
angle, toe-in and castor
length are adjustable. 4
oil-pressure shock
absorbers in alloy with
external thread for the
spring adjustment care
for an optimal wheel
grip. The driving gear is
equipped with an alloy
differential gear with
pluggable driving axles
and the well-tried FG
ball drive.Further
equipment specifications
are: Steel gearwheel 18
teeth, alloy brake
caliper with big Epoxy
brake disk for a better
heat absorption, fuel
tank with ventilation.
All rotating parts such
as driving shafts,
axles, clutch bell
a.s.o. are supported by
ball bearings.The Leopard
is equipped with a 26ccm
combustion engine and for
a further power increase
we have mounted a 3-unit
Tuning pipe. The
competition body as well
as the rear spoiler are
made of transparent
polycarbonte, the
lateral ABS splash guard
protects the model from
bigger dirt. The front
bumper is manufactured in
an impact resistant
polyamide. Knobbed
competition tires on
widened rims complete the
top equipment.
Specification Wheel Base:
505mm Width: 435mm
Length: 720mm Height:
285mm Manufacturer:
RipmaxModel: Leopard Race
Comp. Buggy Kit w/26cc
(C-FG06006)
Availability: In Stock
£804.99
Available
-
Specification Wheel Base:
475mm Width: 420mm
Length: 690mm Height:
270mm Off road, rough
road action is
ever-popular, so if
you're looking for a
vehicle to suit, FG's
range of buggies, race
and monster trucks are
sure to please! Supplied
factory assembled and
almost ready to run with
a powerful and torquey
Zenoah 26cc pullstart
petrol engine but without
radio.Built on a tough
4mm angled countersunk
alloy chassis with double
wishbone suspension front
and rear, coupled to
four oil filled shock
absorbers to soak up the
worst off-road
conditions, these
machines lap up the worst
conditions you can throw
at them! long life and
smooth running, all
rotating parts are
ballraced and the rear
gears and diff gears are
case hardened for longer
life. Close fitting body
shells and guards ensure
that the transmission and
other chassis parts are
protected from dust and
dirt.Marder buggy
variants feature ABS body
shells and wings with
included decals, whilst
the Leopard Race, Baja
Buggies and Beetles
feature polycarbonate
body shells and wings.The
included Zenoah 26cc
pullstart engine runs on
an economical two stroke
petrol/oil (25:1) mix.
With their large volume
petrol tanks, you have
around 45 minutes of
driving fun per fill with
these superb off
roaders!The Marder Race
is the upgraded version
of our Off-Road Buggy
Marder. Selected Tuning
parts mounted into an
experienced Off-Road
model will make the start
in this hobby easier for
you. Manufacturer:
RipmaxModel: Marder OFF
ROAD Buggy ARR w/26cc
(WITHOUT RADIO)
(C-FG06000)
Availability: In Stock
£579.99
Available
-
Built on a 4mm alloy
chassis with double
wishbones at front and
rear axle. All borings of
the alloy chassis are
countersunk to prevent
the screw heads from
bearing out. The model is
serial equipped with the
2-damper front axle which
guarantees an optimal
traction of both front
wheels. At the front and
rear axle king pin angle,
trailing effect and
toe-in can be adjusted by
means of track rods or
respectively adjusting
screws with right-/
left-handed thread.
Further equipment points
are differential gear,
easy-running FG ball
drive, alloy brake
caliper with big brake
disk, oil-pressure shock
absorbers with volume
control and external
adjusting ring for the
initial stress of the
springs. All rotating
parts as shafts, axles,
clutch bell a.s.o. are
supported by ball
bearings.The model is
equipped with a powerful
23ccm combustion engine
which runs with a
2-stroke petrol-oil
mixture. One tank filling
gives you about 45
minutes driving fun. The
power is transmitted over
the well-experienced
system: engine –
2-block clutch over
radial tooth wheels on to
the rear axle which is
equipped with the bevel
differential gear with
pluggable axles. RC-plate
with receiver box. The
tires are ready glued.All
Sportsline 04 models can
be upgraded to an
adequate Competition
model by means of further
FG Tuning accessories,
details of which you will
find in the FG catalog.
Manufacturer: Ripmax - FG
ModelsportModel / Part
No: S/Line 08 Carrera GT
RTR (Clear) (C-FG142079R)
Availability: In Stock
£854.99
Available
-
Just like all other FG
Competition models is the
FG Formula 1 Competition
the most successful model
of the past years. The
experiences we gained
from numerous
competitions have all
influenced the version
08. An important
innovation is the FG
gearwheel drive which is
extremely smooth-running
and cares for more power
reserves. Surely FG
Modellsport has created a
competitive model for the
next years with this 08
version which will
seamlessly follow up on
the past
successes.Equipment of
the FG Formula 1
Competition 08
kit:CNC-cut 8mm alloy
chassis with lateral
carbon fiber inserts,
26ccm Zenoah engine,
inlet silencer, Tuning
pipe, viscous locking
differential, FG
gearwheel drive, ball
drive, complete rear and
front axle carrier unit
with integrated engine
quick-fixing device,
double alloy wishbone
fastenings, lower alloy
delta wishbones at front
and rear axle, front and
rear alloy uprights,
ball-bearing servo saver,
steering stops,
pushrods, 4 oil-pressure
shock absorbers with
alloy damper pistons,
hydr. disk brake or mech.
Tuning brakes at front
and rear, stabilizer for
front and rear axle,
10mm alloy balls, carbon
fiber rear spoiler,
polycarbonate bodyshell,
polyamide front spoiler,
receiver box,
competition tires with
tire inserts.We deliver
the models as a kit
including mounting
instruction. The body
parts are made of clear
polycarbonte for your own
painting. FG stickers and
writings are enclosed.
Manufacturer:
RipmaxModel: F1 Comp. 08
Kit w/26cc & Hydr.Brake
(C-FG10005)For the final
assembly of the models
you need further: radio
control system
(transmitter, receiver),
2 steering servos (each
approx. 15 kg), each 1
throttle/brake servo
(approx. 15 kg),
batteries and
charger.Improvements to
the previous model:•
Lower alloy wishbones at
front/rear axle• Steel
ball joints at front/rear
axle• FG viscous
differential• FG
gearwheel drive• Alloy
rear axle plate• FG
alloy shock absorbers
04• Ball-bearing alloy
servo saver
Availability: In Stock
£2419.99
Denmark