United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
1:10th Scale
Available
-
Ready To Race Straight
From The Box!The Phoenix
ST is once again raising
the benchmark of truck
performance to a new
level. Built on a
high-tech molded
composite chassis, the
Phoenix ST is strong,
rigid and light. It is
lighter in overall weight
compared to other race
level trucks. Further,
the Phoenix ST features a
race proven transmission
with a beefy 2.40:1 ratio
for effortless power
handling. New suspension
technology has also been
applied to the PHOENIX
ST, with extra long
suspension arms for great
stability and improved
rough-track handling. The
front end's geometry has
been optimized with
re-designed steering
blocks for improved
Ackerman and 30 degree
caster blocks. The new
front-end design results
in increased rigidity,
and in less front end
free-play.
SpecificationWheelbase:
10.98" (279
mm)Weight: 3.00 Lbs.
(1361 g)Length:
15.63" (397
mm)Width: 12.32"
(313 mm)Height:
6.10" (155 mm)Ground
Clearance: 1.89" (48
mm)Motor: Super Sport 17T
motor
Availability: In Stock
£139.99
Available
-
The Ansmann Racing 1:10
Buggy 2WD XT Pro Kit is a
radio controlled car by
ansmann. The kit once
built will give you a
fantastic off-road buggy.
Tyres NOT included with
this kit.Specification:
Covered Drive Train.Oil
Filled Aluminium
Dampers.Ball
Differential.Hardened CVD
Shafts.Slipper
Clutch.Carbon Fibre
Reinforced Plastic
Parts.Clear Lexan
Shell.Improved Build
Manual.Electric Kits
Require:(unless stated
differently above)Radio:
2-Channel with
servo(s)Battery: 6-cell
flat with standard Tamiya
connectorCharger: AC/DC
timed or peak for 6-cell
batteryMisc. Items:
Building and track
equipmentESC: Electric
Speed Controller
RequiredTyres: Ansmann
1/10 buggy tyresPaint:
Polycarbonate Spray Paint
(for shell)Manufacturer:
Ansmann RacingModel:
Buggy 2WD XT Pro Kit
(122000010)Scale: 1:10
Availability: In Stock
£129.99
Available
-
Ansmann Racing X-Pro
Blizzard RTR ComboCombo
Packs are ready to run
out of the box! No need
to purchase anything
else!These combo packs
come with a battery and
charger kit recommended
by MyHobbyStore.Products
Included1. Ansmann Racing
X-Pro Blizzard Ready to
Run (124000018)The
Blizzard blows across any
type of terrain and
freezes the ground
beneath it. Whether
asphalt or off road, it
can handle any surface.
Fly with it on the street
and let its cold power
impress you and freeze
your opponent with its
icy storm. Get ready for
a nimble cruiser with
exceptional power. 4WD
buggy featuring oil
filled dampers and Speed
Racer RS motor. Product
Specification:Oil filled
dampers Finished body
Speed Racer RS motorBall
bearings Rear CVD shafts
Pivot ball
suspensionLength 390mm
Width 240mm Wheel base
265mmManufacturer:
Ansmann RacingModel:
X-Pro Blizzard
RTR(124000016)Scale: 1:10
2. Ansmann Racing-Pack
7.2V 3000 mAh NiMH
Battery (161000050) 3.
Ansmann Racing Delta Pro
6 Mains Fast Battery
Charger (152100080) The
Ansmann Racing Delta Pro
6 Mains Fast Charger is a
radio control battery
charger. Features:
Charges 7.2 volt nicads
or NiMH batteries, comes
complete with a Tamiya
plug. Charging current:
900mAh. Image shows EU
model, our model comes
with UK plug.
Manufacturer: Ansmann
RacingModel: Delta Pro 6
Mains Fast Charger
(152100080)
Availability: In Stock
£209.97
Available
-
The RC10 B4 buggy has
already made history,
winning the Cactus
Classic race in its first
major competition, and
being voted R/C Car
Action’s 2003 "Car
of the Year." Now,
Team Associated brings a
higher level of electric
offroad performance to
the Ready-to-Run market
with the B4RS
"Race-Spec"
Ready-to-Run.The
Associated B4RS RTR
includes a double-sided
slipper clutch, 2.6:1
high-torque capacity
differential, and a full
set of 14 shielded ball
bearings. Associated’s
standard blue-anodized
aluminum shocks and
rugged steel dogbone rear
axles are the main
differentiating
components.In addition,
the B4RS RTR comes
equipped with the Team
Associated XP2 radio
system, the latest LRP
"Ai"
Automatic-setup digital
speed control with
reverse, the Reedy Radon
17-turn motor, and a new
pre-painted body design
in your choice of red or
blue paint schemes. Of
course, the B4 RTR also
features the
forward-swept front end
and rear-mounted shock
configuration of the
original cars, optimized
with a co-planar steering
geometry. This suspension
design provides maximum
front-end clearance and
minimizes bump-steer
while maintaining desired
buggy Ackermann angles.
Trailing front axle or
optional inline steering
blocks can be used to
adjust steering
response.The B4 chassis
provides a super-low
center of gravity by
lowering the motor,
battery, wing, and even
the shock mounting
positions, enabling much
higher cornering speeds
and stability during
jumping and through bumpy
sections of the track.
The adjustable-angle rear
wing mounts and even the
transmission case are
integrated into the
chassis/suspension
structure. The
symmetrical suspension
arm design has all four
arms the same length,
and has
"captured"
hinge pins so that no
E-clips are used.The B4RS
RTR comes equipped with
high-traction racing
compound tires with foam
inserts, pre-mounted and
glued to white dish-style
wheels.Team
Associated’s B4 is the
latest generation of the
5-time IFMAR World
Championship winning
heritage of RC10 buggies.
And the B4RS RTR brings
that winning heritage to
the radio control RTR
market.Get a genuine Team
Associated B4 Race-Spec
RTR or the chances are
you’ll just be chasing
one.FeaturesReedy Radon
17-turn motor, already
installed.2.6:1 reduction
transmission.Double-sided
slipper clutch
assembly.Longer
axles.Impact-absorbing
wing mounts.Super-low
center of gravity.The
front wheel uses
wide-body tires.
Optimized front
suspension/steering
assemblyInline or
trailing front
axlesSymmetrical
suspension arm design
with captured hinge
pinsRequired for
completion: Charger,
6-cell Battery Pack, 8
xAA Size Batteries.
AS9037 B4 RS 'Race-Spec'
RTR 1/10th Scale Electric
Racing Buggy
Availability: In Stock
£209.99
Available
-
This excellent off-road
buggy has independent
swing axles for the front
suspension, a rolling
rigid rear suspension,
and large sized friction
dampers which effectively
absorb shocks and bumps.
Semi monocoque structure
acts as the chassis
strengthening part
(Screws are used to
secure the resin body to
the bathtub chassis). The
fully enclosed gearbox
preclude dirt and debris
from interfering with
operation.The Rising
Fighter Buggy is powered
by a 540 motor (included)
and has a Bevel type diff
gear. To ensure excellent
traction for any surfaces
the grooved front tires
and rear spike are a big
plus. It is a Stylish
resin molded body. ESC
(Electric Speed
Controller) included.
Details: Length:
418mmWidth: 236mmHeight:
187mmWheel base:
268mmWeight: 1000g
Manufacturer: TamiyaModel
/ Part No.: 58416
Availability: In Stock
£64.99
Available
-
HPI Racing Blitz Combo
PackCombo Packs are ready
to run out of the box! No
need to purchase anything
else!These combo packs
come with a battery and
charger kit recommended
by MyHobbyStore.Products
Included1. HPI Racing
Blitz With MAXXIS ATTK-10
Body Ready To Run
(103172)Pre-Assembled
1:10th scale 2WD electric
powered short course
truck with radio system,
motor, electronic speed
control, and painted
body. Battery pack and
charger not included.The
Blitz handles like a
dream: officially
licensed Maxxis Trepador
Comp tyres grip all
surfaces and 3-degree
rear uprights help keep
the rear end
planted.MAXXIS
TyresOfficially licensed
Massix Trepador Comp
Off-Road Tyres for the
HPI BlitzInspired Maxxis
Trepador tyres are
officially licensed and
mounted on a set of satin
chrome MK.10 wheels with
simulated beadlocks
Proven HPI Durability
ThroughoutThe HPI Blitz
uses nothing but the
finest grade,
high-impact nylon plastic
on the most critical
areas of the truck - from
the bumpers to the super
beefy arms and everything
in between. HPI's
industry known strength
and durability makes the
Blitz friendly for all -
be it an R/C newcomer,
or the skilled
competitor.Lenghened
ChassisThe Blitz features
an all-new main chassis
based on the E-Firestorm
- lengthened to deliver
the most stable feel a
short-course truck can
offer.High Performance
ThreadedShocksThe
threaded shock bodies
feature super smooth
shock action, as well as
quick, on-the-fly
adjustability.BAJA 5T
InspirationRELIABLE HPI
ELECTRONICS PACKAGEThe
electronics fitted in the
Blitz are rugged and
secure, giving you the
confidence to take the
Blitz to the limit! The
trusty TF-1 radio is a
pistol-grip style
transmitter, with a
realistic steering wheel
for turning and standard
trigger control for
acceleration and braking.
Multiple crystals are
available so you can run
the Blitz alongside other
RC vehicles with no radio
interference. The new
RF-6 receiver takes the
radio signals from the
transmitter and passes
them to the SC-15
electronic speed
controller, which feeds
power to the strong
Firebolt 15 motor. The
SC-15 also features
reverse so you can back
out of tough spots!
Finally, a sturdy SF-1
servo handles the
steering duties. All of
this equipment features
standard connectors so
you can upgrade
individual parts as you
desire.DIMENSIONS:Overall
Width 296mm Wheelbase
329mm (adjustable)Overall
Length 548Overall Height
184~200mm (adjustable)
Manufacturer: HPI
RacingModel: Ready To Run
Blitz With MAXXIS ATTK-10
Body (103172)2. Ansmann
Racing Pack 7.2V - 2000
mAh NiMH Battery
(161000025)3. Ansmann
Racing Delta Pro 6 Mains
Fast Charger
(152100080)The Ansmann
Racing Delta Pro 6 Mains
Fast Charger is a radio
control battery charger.
Features: Charges 7.2
volt nicads or NiMH
batteries, comes
complete with a Tamiya
plug. Charging current:
900mAh. Image shows EU
model, our model comes
with UK plug.
Manufacturer: Ansmann
RacingModel: Delta Pro 6
Mains Fast Charger
(152100080)
Availability: In Stock
£203.97
Available
-
Pre-Assembled 1:10th
scale 2WD electric
powered short course
truck with radio system,
motor, electronic speed
control, and painted
body. Battery pack and
charger not included.The
Blitz handles like a
dream: officially
licensed Maxxis Trepador
Comp tyres grip all
surfaces and 3-degree
rear uprights help keep
the rear end
planted.MAXXIS
TyresOfficially licensed
Massix Trepador Comp
Off-Road Tyres for the
HPI BlitzInspired Maxxis
Trepador tyres are
officially licensed and
mounted on a set of satin
chrome MK.10 wheels with
simulated beadlocks
Proven HPI Durability
ThroughoutThe HPI Blitz
uses nothing but the
finest grade,
high-impact nylon plastic
on the most critical
areas of the truck - from
the bumpers to the super
beefy arms and everything
in between. HPI's
industry known strength
and durability makes the
Blitz friendly for all -
be it an R/C newcomer,
or the skilled
competitor.Lenghened
ChassisThe Blitz features
an all-new main chassis
based on the E-Firestorm
- lengthened to deliver
the most stable feel a
short-course truck can
offer.High Performance
ThreadedShocksThe
threaded shock bodies
feature super smooth
shock action, as well as
quick, on-the-fly
adjustability.BAJA 5T
InspirationRELIABLE HPI
ELECTRONICS PACKAGEThe
electronics fitted in the
Blitz are rugged and
secure, giving you the
confidence to take the
Blitz to the limit! The
trusty TF-1 radio is a
pistol-grip style
transmitter, with a
realistic steering wheel
for turning and standard
trigger control for
acceleration and braking.
Multiple crystals are
available so you can run
the Blitz alongside other
RC vehicles with no radio
interference. The new
RF-6 receiver takes the
radio signals from the
transmitter and passes
them to the SC-15
electronic speed
controller, which feeds
power to the strong
Firebolt 15 motor. The
SC-15 also features
reverse so you can back
out of tough spots!
Finally, a sturdy SF-1
servo handles the
steering duties. All of
this equipment features
standard connectors so
you can upgrade
individual parts as you
desire.DIMENSIONS:Overall
Width 296mm Wheelbase
329mm (adjustable)Overall
Length 548Overall Height
184~200mm (adjustable)
Manufacturer: HPI
RacingModel: Ready To Run
Blitz With MAXXIS ATTK-10
Body (103172)
Availability: In Stock
£179.99
Available
-
This is a 1/10 scale R/C
assembly kit model of the
Ford Bronco 1973.Comes on
the excellent CR-01
crawling chassis.The
newly designed
polycarbonate body
captures the Bronco's
classic form.Newly
designed metal plated H
parts (Grille, side
mirrors, and light
covers) are made of
durable ABS resin.The
Bronco comes equipped
with CR-01 Cliff Crawler
Tires (Item 54117).Type
540 motor included.-ESC,
2-channel R/C system,
battery pack & charger
are separately required.A
wide range of Hop Up
parts are available for
you to further customize
your machine.
Manufacturer: TamiyaModel
/ Part No.: 58436
Availability: In Stock
£299.99
Available
-
Ready To Race Straight
From The Box!The Phoenix
ST is once again raising
the benchmark of truck
performance to a new
level. Built on a
high-tech molded
composite chassis, the
Phoenix ST is strong,
rigid and light. It is
lighter in overall weight
compared to other race
level trucks. Further,
the Phoenix ST features a
race proven transmission
with a beefy 2.40:1 ratio
for effortless power
handling.New suspension
technology has also been
applied to the PHOENIX
ST, with extra long
suspension arms for great
stability and improved
rough-track handling. The
front end's geometry has
been optimized with
re-designed steering
blocks for improved
Ackerman and 30 degree
caster blocks. The new
front-end design results
in increased rigidity,
and in less front end
free-play.
SpecificationWheelbase:
10.98" (279
mm)Weight: 3.00 Lbs.
(1361 g)Length:
15.63" (397
mm)Width: 12.32"
(313 mm)Height:
6.10" (155 mm)Ground
Clearance: 1.89" (48
mm)Motor: Super Sport 17T
motor
Availability: In Stock
£139.99
Available
-
Pre-assembled 1/10th
scale 2WD powered truck
with G3.0 engine, radio
and finished
bodyIntroducing the HPI
Firestorm 2WD RTR stadium
truck! This amazing 2WD
stadium truck features
all-new design
specifications, cool
racing attributes and a
fresh direction for HPI's
high quality entry level
nitro truck
line-up!Superb Design
HeritageIt's easy to spot
the Firestorm's design
heritage from the
Hellfire in the sleek
black look, the subdued
chassis anodizing, and
the smart and efficient
layout. Many design
features of the high spec
Hellfire have been
carried over - from the
black upper deck, the
complete set of hex
screws, the captured
hinge pins front and
rear, and the next-level
suspension design and
layout!HPI thought of
everything when it came
to remaking the 2WD
stadium truck. You get a
huge power increase from
a new, stronger
pullstart G3.0 engine and
an all-new chassis design
to bring racing like
performance to a rock
solid entry level
truck.Performance Driven
DesignRace-inspired
features give great
handling on all surfaces
from open fields, parks,
even to your local
racing track. The
dual-deck design features
a 3mm aluminium main
chassis and an aluminium
upper deck. A low-profile
75cc fuel tank and
laydown steering servo
help provide a very low
centre of gravity (CG). A
full set of turnbuckles
allows you to adjust
camber and front toe. The
rear toe and anti-squat
angles are adjustable
using pivot blocks, just
like on the high-spec
racing buggies. Real
oil-filled shocks absorb
all bumps and jumps and
keep the tyres on the
ground. Real silicone
shock oil is used to
provide consistent
performance in all
temperatures. The shocks
even feature threaded
shock bodies for easy
spring adjustments, and
the many shock mounts (3
upper, 2 lower) give a
multitude of tuning
possibilities. 16 ball
bearings provide maximum
drive train efficiency
for faster top speed and
durability. Wide-track
suspension and all-new
tyres front and rear give
the Firestorm superb
control. Providing extra
grip and control are the
new square-pin Ground
Assault rear tyres get
the power to the ground
and asymmetric dual-edge
Front Line tyres to keep
the Firestorm pointed in
the right direction.The
aluminium main chassis
and upper deck combine
with the steel chassis
brace to make the
Firestorm extremely
stiff. A dual-pad slipper
clutch protects the
drivetrain from rough
landings, while the 0.8
module clutchbell and
spur gear are designed
for maximum efficiency
and reliability. The
transmission features a
4.11 to 1 ratio and a
sealed planetary gear
differential, allowing
you to tune the
performance of the truck
with different diff oils.
Stopping the Firestorm is
a fibre disk brake
actuated by easy to
adjust linkage. The steel
centre chassis brace
provides extra stiffness
and keeps the gear mesh
between the spur and
clutchbell consistent.
Steel alloy front axles
and rear dogbones take
the extreme punishment of
bashing and racing in the
worst possible
environments. Protecting
the electronics are
sealed compartments for
the battery pack and
receiver, protecting
them from the elements
and strategically placed
for optimum weight
balance.The Firestorm is
pre-assembled right out
of the box - from the
factory-fitted radio gear
and G3.0 engine to the
painted and trimmed
desert truck racer
bodyshell! The reliable
HPI TF-1 AM radio system
provides all the control
you'll need.
Manufacturer: HPI
RacingModel: FIRESTORM
10T Ready To Run (10511)
Availability: In Stock
£199.99
Available
-
Pre-assembled 1:10 Scale
4WD Monster Truck with
Flux System Painted Body
With 3mm aluminium
plate-style
chassisDrivetrainFlux
Shot Motor and Flux
Reload SpeedoSuspension
and
SteeringDurabilityControlling
the Bullet is the trusty
and proven HPI TF-1
radioFull Assembly
Instructions and HPI RC
Cars
DVDFeaturesFactory-assembled
& pre-painted 4WD Monster
TruckPainted and detailed
bodyshell ready to strut
its stuff!Strong and
powerful HPI Flux Shot
brushless motorReliable
HPI Flux Reload speedo
with fan and 2S LiPo
capabilityEasy and simple
pullstarter for instant
action6061 aluminium
chassis provides the
ideal backboneTough
bumpers combine with skid
plates to protect all 4
corners8 oil-filled
shocks provide a plush
rideExtra-long suspension
arms provide stability
and balanceProven racing
design throughoutSteel
turnbuckle links allow
you to custom-tune the
rideSealed shaft
drivetrain is
maintenance-free and
super strongDouble-pad
slipper clutch design for
extra drivetrain
protectionReliable disk
brake with adjustable
linkageAll-terrain spiked
tyres look fantastic on
black chrome wheelsSolid
and reliable HPI
electronics fitted in
splashproof receiver boxA
smart metal washer
prevents over-tightening
of wheel nutsAluminium
center brace for more
durability over plastic
braceAdditional tuning
options included in the
kit Manufacturer: HPI
RacingModel: Bullet MT
Flux Ready To Run
(101403)
Availability: In Stock
£254.99
Available
-
Pre-assembled 1:10 Scale
4WD Stadium Truck with
Nitro Star G3.0 Engine
and Painted Body3mm
aluminium plate-style
chassisDrivetrain used in
all Bullet trucks is a
full-time four-wheel
drive shaft-type
drivetrainNitro Star G3.0
EngineSuspension and
SteeringDurabilityElectronicsFull
Assembly Instructions and
HPI RC Cars
DVDFeaturesFactory-assembled
& pre-painted 4WD Stadium
TruckPainted and detailed
bodyshell ready to strut
its stuff!Strong and
reliable Nitro Star G3.0
engineEasy and simple
pullstarter for instant
actionBig 75cc fuel tank
gives you plenty of
runtime7075-T6 aluminium
chassis provides the
ideal backboneTough
bumpers combine with skid
plates to protect all 4
corners8 oil-filled
shocks provide a plush
rideExtra-long suspension
arms provide stability
and balanceProven racing
design throughoutSteel
turnbuckle links allow
you to custom-tune the
rideSealed shaft
drivetrain is
maintenance-free and
super strongDouble-pad
slipper clutch design for
extra drivetrain
protectionReliable disk
brake with adjustable
linkageAll-terrain tyres
look fantastic on black
chrome wheelsSolid and
reliable HPI electronics
fitted in splashproof
receiver boxIntelligent
fuel line routing to keep
things neat and tidyA
smart metal washer
prevents over-tightening
of wheel nutsAluminium
center brace for more
durability over plastic
braceAdditional
track-tuning options
included in the kit!
Manufacturer: HPI
RacingModel: Bullet ST
3.0 Ready To Run (101400)
Availability: In Stock
£214.99
Available
-
Mitsubishi’s last
official racing rally car
now joins Tamiya’s
famous 1/10 R/C Car
series.The polycarbonate
shell accurately captures
the eye-catching form of
the Racing Lancer.Front &
Rear light cases,
mirrors, snorkel duct,
and the duct securing cap
(J Parts) are all
precisely reproduced and
are made of durable ABS
resin.Gun metal black
wheel x
4pcs.Fully-enclosed front
and rear gearboxes are
equipped with
differential gears for
smooth cornering.4-wheel
double wishbone
suspension features oil
dampers for excellent
shock absorption.2 white
and 2 red 5mm LED light
(Total 4) are
included.Comes with LED
Light Unit TLU-01.ESC and
type 540 motor
included.2-channel R/C
system, battery pack &
charger are separately
required.This machine
features the same chassis
as the Cayenne
Transsyberis 2007.
Manufacturer: TamiyaModel
/ Part No.: 58421
Availability: In Stock
£169.99
Available
-
There is only one way to
best describe this
electric truggy and that
is extreme speed. The
Pioneer will run at over
40mph out of the box!
This is all thanks to the
brushless motor and high
power 11.1v Li-Polymer
battery pack.The special
motor in this model is
much quicker than the
motors found in other
models. Because it is
brushless it also means
the motor needs no
maintenance and can
handle a lot more power
being pumped into it. So
to take full advantage of
that the standard 7.2v
Ni-Cd batteries that are
found in most rc car kits
has been replaced with a
very powerful 11.1v
lithium battery along
with a balanced lithium
battery charger which is
needed for these special
batteries.With this
massive amount of power
it is important that the
model can handle the
speed and pressure that
is produced so many of
the parts have been made
stronger like you would
find in a nitro rc car.
An aluminium chassis,
high torque servo,
aluminium drive shaft and
extra thick oil filled
shocks, along with a
mixture of metal and
special slightly flexible
plastic all ensure that
the power does not just
rip the model to
pieces.The model comes
fully built with
everything you need to
get racing apart from
eight normal AA batteries
for the radio handset. We
have not been this
excited about a new model
for a long time and you
will know why when you
hit the throttle for the
first time and see it pop
a little wheelie before
taking off at such a
crazy speed. Highly
recommended. Features:1.
Fully assembled ready to
run2. High speed model -
40+ Mph3. Fully ball
raced4. Powerful
brushless motor5. 11.1v
Li-po battery6.
Front/rear metal
differentials7. Aluminium
drive shafts8. Sway bar
as standard9. Adjustable
camber10. Adjustable oil
filled shocks11. Highly
adjustable for race
tuning12. 4WD shaft
driven system13. Slipper
system14. Aluminium
chassis
Specifications:Width:
205mmHeight: 110mmLength:
260mmTrack:
165mmWheelbase: 180mmGear
ratio: 10.86:1Tyres: 73mm
x 39.5mmGround clearance:
25mmTransmitter: 2ch FM
Availability: In Stock
£124.99
Available
-
Team Associated's RC10B4
has been proven as a
world-class competition
buggy with four
consecutive IFMAR Worlds
Championships and five
ROAR National
Championships. Equally
important are the
countless club and
regional events that the
B4 continues to win.
Built on the 4-time World
Champion and 5-time
National Champion RC10B4
platform.XP3-SS 2.4 GHz
3-channel radio system
with SHV1504 MG metal
gear servo.XP SC200
electronic speed control
with LiPo cutoff,
forward and reverse with
reverse lock out.Reedy
17-turn motor.2.6:1 ratio
gearbox with sealed gear
differential, dual-sided
adjustable slipper
clutch, and rubber
sealed ball
bearings.Molded composite
low-CG chassis with
set-screw antenna tube
lock.Blue aluminum shock
bodies with molded
pre-load clips.Battery
strap with twist-lock
thumb knobs etc. Spec
Check:Length: 377mmWidth:
250mmTrack: 214mmWeight:
1530gWheelbase:
288mmInternal Gear Ratio:
2.6:1Drive: 2WD
Availability: In Stock
£189.99
Available
-
The injection molded body
features precision
details such as door
hinges and hood catch
pins and is also equipped
with a high-lift jack on
its rear. The excellent
rock crawling CR-01 shaft
driven 4WD chassis
features durable ladder
frame with aluminium side
channels and resin cross
members as well as 4-link
rigid suspension with oil
dampers that are actuated
via aluminium pushrods.
In addition, it comes
with a lockable
differential, large
diameter tires with side
tread patterns, and
beadlock wheels. As the
Wrangler has been quite
popular as a base for
rock crawling machines in
the U.S., this R/C
version will perfectly
match scenes such as
driving on difficult
rocky terrains.
Manufacturer: TamiyaModel
/ Part No.: 58429
Availability: In Stock
£359.99
Available
-
Based upon the award
winning AX10 Scorpion
KIT. The AX10 Scorpion
RTC comes Ready-to-Crawl.
The RTC is currently the
only 2.2 (most popular
scale/class) rock crawler
on the market that only
requires batteries, and
is ready to hit the
terrain.AX10 Scorpion RTC
Features:Complete
Ready-to-Crawl (RTC) out
of the boxFull Time 4
Wheel Drive (4WD)Mount a
standard stick pack to
get up and running
quickly, or use the
included upper link plate
to mount smaller
batteries lower in the
chassis for improved
crawling performance14T
pinion paired with an 87T
spur gear gives you a
decent amount of wheel
speed and great low-end
torque.True
beadlocksHi-quality
composite plastic and
metals55T electric
motorDurable (ESC)
Electronic Speed
Controller: Hi-quality
forward and reverse speed
controller.Hi-torque
Metal Gear Servo help
hold your line when rock
crawlingSolid rear axle
lockouts improve ground
clearance when
crawlingSlipper clutch:
Allows motor to work more
efficiently and greatly
enhances the durability
of the
drivetrain.Aluminum
chassis plates with a
molded nylon skid plate
provide a solid and rigid
chassisFull ball
bearingsOverall gear
ratio range from 15:1 to
74:1Transmission: Ultra
compact and lightweight
with a 2.6:1
ratioDifferentials:
Locked Front and
RearTires: Pro-Line
Hammers® with Pro-Line®
Memory FoamsWheels: Axial
2.2 8 hole satin chrome
beadlocks with “Rock”
beadlock rings
includedSuspension: 3
LinkDrive Shafts:
Universal front and rear
with new and improved
yokesXC-1 Body
includedNew beefed up
lower linksNew stronger
steering tie rodsSpec
Check:Wheelbase:
316mm~332mmWidth: 254mm
Height: 156mm Weight:
1588g (3.5
lbs)Articulation:
70°Ground Clearance:
68mm Required for
completion: Charger,
7.2v Stick Pack Battery,
8 xAA Size Batteries.
Manufacturer: Axial
RacingModel: X10 Scorpion
1/10th Scale Electric RTC
(Ready-To-Crawl) Rock
Crawler (AX90011)
Availability: In Stock
£249.99
Available
-
For those who want more
BlingCombining a 2950’s
style pick-up truck body
with massive monster
truck tires, the popular
Midnight Pumpkin is now
available with a metallic
body for even more
eye-catching R/C action.
The super-detailed body
is made with the same
technology as Tamiya’s
high-quality plastic
model kits for the most
realistic look possible.
Metal plated wheels and
damper cylinders further
enhances this truck’s
custom look. The simple
and tough chassis
features a rear-mounted
motor for realistic rear
wheel drive and a strong
box frame. Front
independent swing arm and
rear rolling rigid coil
spring suspension systems
is matched with gigantic
115mm diameter tires that
lets this truck trample
anything in its way.
Gearbox is sealed to
protect from dirt and
debris, and the truck
even has a wheelie bar to
let you feel like you are
driving a real monster
truck. Manufacturer:
TamiyaModel / Part No.:
58365
Availability: In Stock
£94.99
Available
-
This is a 1/10 scale R/C
assembly model kit of the
2008 Mercedes Benz AMG
DTM C Class.The
polycarbonate body
accurately captures the
impressive form of the
car.Shaft driven 4-wheel
drive TT-01 Type-E
chassis gives this
electric R/C car superior
control and
handling.Comes with
racing slick tires. 2
white and 2 red 5mm LED
lights (Total 4) are
included.Comes with LED
Light Unit TLU-01 (Item
53909). *It is possible
to assemble with the
separately available LED
Light Control Unit TLU-02
(Item 53937) which allows
up to 16pairs of LEDs
(total 32 LEDs) to be
controlled.ESC and type
540 motor included.
2-channel R/C system,
battery pack & charger
are separately required.A
wide variety of Option
Parts are available for
you to further customize
your machine.
Manufacturer: TamiyaModel
/ Part No.: 58433
Availability: In Stock
£144.99
Available
-
Inspired by the
overwhelming popularity
and success of Team
Associated’s original
MGT, the Mini MGT 3.0
packs all the same
dirt-kicking performance
into a compact 1/10th
scale package. The Mini
MGT 3.0 brings with it
all of the features: a
2-speed automatic
transmission with
reverse, eight coil-over
oil-filled shocks, full
precision ball bearings,
and specially designed
Team Associated
all-terrain tires, just
to name a few! The Team
Associated Mini MGT comes
factory assembled with a
painted body, ready for
you to fire up and rip up
the road! For the perfect
1/10th radio control
monster truck look no
futher than the Mini
MGT.FeaturesAll steel
differential internal
components for ultimate
durabilityDual drilled
brake rotors fitted with
a unique alignment device
that keeps the brakes
friction free until
engaged.Specially
designed tire to combine
excellent performance in
all conditionsHeavy duty
metal-gear hi-torque
servo2-speed automatic
transmission with reverse
has an optimized
gearratio for awesome
accelerationUltra rigid
extruded aluminum chassis
optimized for the rigors
of offroad use14.0mm
steel drive
hexesElliptical
“buffer” style
bumpers that easily
withstand heavy
impactsTrophy truck
inspired stylingTeam
Associated 18 Pro
two-stroke nitro engine
with pull-startEight
oil-filled independent
coil-over shock
absorbersSealed radio
box28 precision ball
bearings110cc fuel tank
for long run timeTeam
Associated XP3 radio UPC
84695 20515 system, glow
igniter and fuel bottle
included!AS20515 Mini MGT
3.0 RTR 1/10th 4WD
Monster Truck
Availability: In Stock
£269.99
Available
-
Ready To Race Straight
From The Box!The Phoenix
ST is once again raising
the benchmark of truck
performance to a new
level. Built on a
high-tech molded
composite chassis, the
Phoenix ST is strong,
rigid and light. It is
lighter in overall weight
compared to other race
level trucks. Further,
the Phoenix ST features a
race proven transmission
with a beefy 2.40:1 ratio
for effortless power
handling. New suspension
technology has also been
applied to the PHOENIX
ST, with extra long
suspension arms for great
stability and improved
rough-track handling. The
front end's geometry has
been optimized with
re-designed steering
blocks for improved
Ackerman and 30 degree
caster blocks. The new
front-end design results
in increased rigidity,
and in less front end
free-play. Specification
:Wheelbase: 10.98"
(279 mm)Weight: 3.00 Lbs.
(1361 g)Length:
15.63" (397
mm)Width: 12.32"
(313 mm)Height:
6.10" (155 mm)Ground
Clearance: 1.89" (48
mm)Motor: Super Sport 17T
motor
Availability: In Stock
£139.99
Available
-
Originally created by Sir
Alec Isigonis in 1959,
and tuned by John Cooper,
the "Mini" has
established worldwide
fame on both the
commercial and racing
scene. Tamiya has
reproduced the racing
version in a 1/10 scale
Radio Control car format.
The M-03 chassis features
front-mounted motor and
front wheel drive just
like the actual car for
realistic handling. The
easy to assemble, slim
monocoque frame is made
of durable resin, and
features a 4-wheel
independent double
wishbone suspension with
lightweight uprights for
sharp steering &
cornering performance. In
addition, the centrally
placed steering servo and
isometric steering
tie-rods optimize the
balance and enhance
excellent handling
performance.
Specifications Chassis
Type: M-03Scale: 1/10
OverallLength: 315mm
OverallWidth: 167mm
Wheelbase: 210mmChassis
Weight: 855gTread F/R:
138mm TireWidth/Diameter
F/R: 27/59mmGear Ratio:
5.8:1 Body:
PolycarbonateFrame:
Polycarbonate monocoque
typeSuspension: Four
wheel independent double
wishbone systemMotor: 540
Type Motor Included Radio
ControlUnit: 2 Channel
(available separately)
Manufacturer: TamiyaModel
/ Part No.: 58211
Availability: In Stock
£94.99
Available
-
Nothing fancy, just a
simple ready-to-run car
that is affordable,
allowing you to enjoy the
RC experience. Ideal for
beginners and the young
this is a perfect entry
level radio control car
kit. Pre-assembled and
RTR, this 1/10th Scale
Electric Subaru Impreza
WRC features a highly
detailed moulded shell,
with officially licensed
livery, and looks great
on the shelf or just
running around the
drive.Features4WD Central
Shaft DriveBy changing
frequency crystal, it
can serve up to 6
frequenciesDouble
wishbone suspensionFront
and rear bevel gear
differentialsMetal
dogbonesPainted and
decaled bodyControl: AM
Digital Proportional
Radio ControlSpeed: 35
km/hourMotor: 540 motor,
Mechanical Speed
Control(Electronic Speed
Control - option)Max
Range: 100 metersPower
Required: 8 x AA(Not
included), 7.2V battery
pack (Included)Requires 8
x AA batteries. HE0301
Electric RTR Subaru
Impreza WRC
Availability: In Stock
£83.49
Available
-
This 1/10 scale 4WD buggy
is specially designed to
excel in off-road buggy
racing. It features a
mid-rear mounted motor
and longitundinally
mounted battery for
optimum balance for
jumping. Battery is
inserted through the
bottom of the chassis,
eliminating need to
remove body, which makes
routine maintenance easy
and quick. High
performance shaft drive
4WD combines with
suspension system
featuring extra long
suspension arms for
improved stability and
off-road handling. About
the Model High
performance 1/10 4WD
buggy chassis designed
for off-road
racing4-wheel independent
double wishbone
suspension features CVA
oil dampers and extra
long suspension arms for
improved stability and
handlingIncludes sealed
diff gearbox
indispensable for
off-road runningFeatures
full ball
bearingsElectronic Speed
Controller (Not Included)
Includes 540 type
motorNewly designed
off-road tires and wheels
featured larger diameter
and width, and new tread
pattern designed for
excellent running and
control on hard dirt
tracksTires: High Density
Spike Tires K (4WD/Front,
62/25), High Density
Spike Tires K (Rear,
62/35) Wheels: Large
DishWheels (4WD/Front,
62/25), Large Dish
Wheels (Rear 62/35) 2.94
internal gear ratio.
Manufacturer: TamiyaModel
/ Part No.: 58370
Availability: In Stock
£129.99
Available
-
So if you are looking to
get into R/C on a budget,
but want a vehicle that
makes the competition
look puny and weak, then
look no further than the
STRIKER MT-1 Step Up
Striker MT-1 Features:
High Speed 20T
MotorElectronic Speed
ControllerRadio System
IncludedAdjustable Body
PostsOil Filled
ShocksAggressive mud
traction tyres4 Spoke
Chrome WheelsHigh
Clearance
ChassisPre-Painted
Bodyshell Spec
Check:Wheelbase:
290mmLength: 445mmWidth:
330mmHeight: 200mmHigh
Speed: +35km/h 2.6:1 Gear
Transmission
Manufacturer: Step Up
StrikerModel: SU0009
Availability: In Stock
£99.99
Available
-
This newly polycarbonate
body captures the
beautiful form of the
Countach.
Separately-molded parts
are a Mirror, rear wing,
and This newly
polycarbonate body
captures the beautiful
form of the Countach.
Separately-molded parts
are a Mirror, rear wing,
and metal plated light
case. Head lights are in
the down position, so
that they can’t pop up.
Type 540 motor installed
on the impressive
shaft-driven 4WD TT-01
(Type-E)-Improved
steering linkage design
features TA05 steering
posts for sharper
steering re-sponse.-Short
wheel base (251mm), Rear
wide tread (Uses long
wheel axle). Countach
LP500S (TT-01E) wheels.
Front offset [+2] Rear
offset [+4]. LED Lights:
Fog lights (5mm white) x
2, Taillights (5mm Red)
x 2 are included.-Both
front & rear light cases
have two 5mm and four 3mm
LED Light installation
points. Manufacturer:
TamiyaModel / Part No.:
58413
Availability: In Stock
£119.99
Available
-
Pre-assembled 1:10 Scale
4WD Monster Truck with
Nitro Star G3.0 Engine
and Painted
BodyChassisThe Bullet
trucks use a 3mm
aluminium plate-style
chassis as the backbone,
providing an extremely
tough foundation for the
suspension and
drivetrain. The aluminium
used in the chassis is
the very strong 7075-T6
alloy, which is the same
aluminium available in
top-spec radio-controlled
vehicles, making it the
ideal material for
something like the
Bullet! DrivetrainThe
drivetrain used in all
Bullet trucks is a
full-time four-wheel
drive shaft-type
drivetrain, just like
the one used in 1/8th
scale buggies like the
World Champion D8 buggy.
A shaft drivetrain is the
best option for a kit
that's expected to
encounter every possible
driving condition and
track surface, so
whether you're blasting
through mud, water,
dirt, grass, snow or
gravel, this is exactly
what you what you
want!Nitro Star G3.0
EngineThe '3.0' in the
Bullet MT 3.0 name stands
for the powerful Nitro
Star G3.0 engine, HPI's
latest. 18-size
nitro-breathing
powerplant. It's equipped
with the latest modern
features taken directly
from much more expensive
racing engines, yet it's
easy to tune and adjust
so hobbyists of all skill
levels can jump right in
and have fun!
DurabilityWe've gone over
quite a lot how fantastic
the Bullet MT 3.0 is,
but there's one important
thing we haven't covered
in detail yet: how
absolutely tough and
strong it is! Bumpers,
skid plates, thick steel
drivetrain parts,
specially constructed
composite parts and smart
design combine to make
this one of the
strongest, most durable
and most reliable
radio-control trucks
you'll ever
try.ElectronicsControlling
the Bullet is the trusty
and proven HPI TF-1
radio, which has been
used by many RC hobbyists
around the world. The
realistic steering wheel
feel of this type of
radio encourages the RC
beginner to think of the
Bullet as a real car
driving around a race
course, and the feel of
pulling back on the
throttle trigger is just
like stomping on the
accelerator of a real
car! Full Assembly
Instructions and HPI RC
Cars
DVDFeatures:Factory-assembled
& pre-painted 4WD Monster
TruckPainted and detailed
bodyshell ready to strut
its stuff!Strong and
reliable Nitro Star G3.0
engineEasy and simple
pullstarter for instant
actionBig 75cc fuel tank
gives you plenty of
runtime7075-T6 aluminium
chassis provides the
ideal backboneTough
bumpers combine with skid
plates to protect all 4
corners8 oil-filled
shocks provide a plush
rideExtra-long suspension
arms provide stability
and balanceProven racing
design throughoutSteel
turnbuckle links allow
you to custom-tune the
rideSealed shaft
drivetrain is
maintenance-free and
super strongDouble-pad
slipper clutch design for
extra drivetrain
protectionReliable disk
brake with adjustable
linkageAll-terrain spiked
tyres look fantastic on
black chrome wheelsSolid
and reliable HPI
electronics fitted in
splashproof receiver
boxIntelligent fuel line
routing to keep things
neat and tidyA smart
metal washer prevents
over-tightening of wheel
nutsAluminium center
brace for more durability
over plastic
braceAdditional tuning
options included in the
kit Manufacturer: HPI
RacingModel: HPI Racing
Bullet MT 3.0 RTR
(101401)
Availability: In Stock
£222.99
Available
-
Pre-assembled 1:10 Scale
4WD Stadium Truck with
Flux System Painted
BodyChassisDrivetrainThe
drivetrain used in all
Bullet trucks is a
full-time four-wheel
drive shaft-type
drivetrain, just like
the one used in 1/8th
scale buggies such as the
World Champion D8 buggy.
A shaft drivetrain is the
best option for a kit
that's expected to
encounter every possible
driving condition and
track surface, so
whether you're blasting
through mud, water,
dirt, grass, snow or
gravel, this is exactly
what you what you
want!Flux Shot Motor and
Flux Reload SpeedoThe HPI
Flux system installed in
the Bullet Flux kits
features the same
mind-bending brushless
technology that makes the
Savage Flux HP and Vorza
Flux HP kits so
absolutely insane - truly
awesome power packed into
a compact and tidy
package!Suspension and
SteeringThe Bullet ST
Flux uses a tough
suspension design derived
from larger racing
trucks, but with a few
extra bits for increased
durability! Long
suspension arms are
damped by 2 oil-filled
shock absorbers each,
and tough front and rear
bumpers combined with
skid plates protect both
ends of the truck in just
about every
collision.DurabilityWe've
gone over quite a lot how
fantastic the Bullet MT
Flux is, but there's one
important thing we
haven't covered in detail
yet: how absolutely tough
and strong it is!
Bumpers, skid plates,
thick steel drivetrain
parts, specially
constructed composite
parts and smart design
combine to make this one
of the strongest, most
durable and most reliable
radio-control trucks
you'll ever
try.ElectronicsControlling
the Bullet is the trusty
and proven HPI TF-1
radio, which has been
used by many RC hobbyists
around the world. The
realistic steering wheel
feel of this type of
radio encourages the RC
beginner to think of the
Bullet as a real car
driving around a race
course, and the feel of
pulling back on the
throttle trigger is just
like stomping on the
accelerator of a real
car!Full Assembly
Instructions and HPI RC
Cars
DVDFeaturesFactory-assembled
& pre-painted 4WD Monster
TruckPainted and detailed
bodyshell ready to strut
its stuff!Strong and
powerful HPI Flux Shot
brushless motorReliable
HPI Flux Reload speedo
with fan and 2S LiPo
capabilityEasy and simple
pullstarter for instant
action6061 aluminium
chassis provides the
ideal backboneTough
bumpers combine with skid
plates to protect all 4
corners8 oil-filled
shocks provide a plush
rideExtra-long suspension
arms provide stability
and balanceProven racing
design throughoutSteel
turnbuckle links allow
you to custom-tune the
rideSealed shaft
drivetrain is
maintenance-free and
super strongDouble-pad
slipper clutch design for
extra drivetrain
protectionReliable disk
brake with adjustable
linkageAll-terrain
tractor-tread tyres look
fantastic on black chrome
wheelsSolid and reliable
HPI electronics fitted in
splashproof receiver boxA
smart metal washer
prevents over-tightening
of wheel nutsAluminium
center brace for more
durability over plastic
braceAdditional tuning
options included in the
kitManufacturer: HPI
RacingModel: Bullet ST
Flux Ready To Run
(101402)
Availability: In Stock
£254.99
Available
-
Based on the 7-time
National Champion RC10T4,
the brushed RC10T4.1 is
a fully assembled truck
that features many of the
components from the
RC10T4 Team kit, while
incorporating a totally
new 2.4 GHz XP3-SS
3-Channel radio system
and SHV1504 MG metal gear
steering servo. Power is
supplied by a 17-turn
Reedy motor while the XP
SC200 electronic speed
control with LiPo cutoff
provides smooth throttle
control. A sealed gear
differential improves
reliability and allows
fine tuning for different
track conditions.Designed
by the winningest name in
R/C, the RC10T4.1 can be
additionally upgraded
using a full line of
Factory Team T4 hopups,
as well as Reedy and LRP
performance parts. Spec
Check: Length:
390mmWidth: 316mmTrack:
270mmWeight:
1756gWheelbase:
288mmInternal Gear Ratio:
2.6:1Drive: 2WD Please
Availability: In Stock
£204.99
Available
-
The Super Trofeo is a
limited edition version
of the Gallardo LP 560-4
sports car. It was
designed for the
Lamborghini Blancpain
Super Trofeo one-make
racing series, which was
held in May 2009. The car
features the same chassis
as the LP 560-4, but
includes modifications
such as a direct
injection V10 engine
which pumps out 570ps. It
also has a higher
compression ratio of
12.5:1 variable valve
timing. The standard,
E-gear transmission
allows the driver to
shift gears much faster
than a manual gearbox.
The Gallardo features a
4WD suspension for
enhanced handling and a
dry weight of 2, 900lbs.
Specification:1/10 R/C
assembly model kit.Newly
designed polycarbonate
body accurately
reproduces the
ground-hugging form of
the Gallardo.Separately
molded side mirrors and
rear wing are accurately
reproduced.2-belt driven
TA05 ver.II chassis
offers superior control,
handling, and easier
maintenance.Comes with
medium narrow racing
slick tires and 16-spoke
gun metal wheels.Type 540
motor included.2-channel
R/C system, ESC,
battery pack & charger
are separately required.
Manufacturer: TamiyaModel
/ Part No.: 58456
Availability: In Stock
£209.99
Archived Product
-
Tamiya XB This fantastic
model is ready built and
comes with all radio
gear, a battery and
charger. Simply put on
charge and you are ready
to go!!!! (No
construction
required)Tamiya is proud
to announce its new
Expert Built Sport (XBS)
series of Ready-to-Run
R/C models. This series
has been developed with
three main goals in mind:
Simplicity Targeting a
larger demographic of R/C
users Scope for
individual
customizationThe XB Sport
models utilize a special
version of the TT-01
Type-E chassis The
aggressively-styled
Mitsubishi Lancer
Evolution X was unveiled
in 2007 and was equipped
with advanced features
such as a Twin Clutch SST
six-speed sequential
transmission. It was
powered by a turbocharged
2 liter 4-cylinder DOHC
engine producing 280hp
and 43kg/m of torque.
Specs & Features1/10 R/C
XBS Ready-to-Run model.
The XBS chassis is a
streamlined version of
the popular TT-01 Type-E
Chassis, and is
therefore compatible with
a wide range of Option
Parts for customization.
Type 540 motor, ESC,
and 2-channel AM Adspec
GP transmitter included.
Manufacturer:
TamiyaModel: 1:10 R/C XBS
MITSUBISHI LANCER EV X
(46604 )
Availability: In Stock
£154.99
Available
-
This is a 1/10 R/C
assembly kit.Length:
315mm, Width: 167mm,
Height: 135mm.The very
popular Mini Cooper
Racing car comes loaded
on the new M-05
chassis.The servo,
receiver, and ESC are
mounted on the rear of
the newly designed
monocoque frame for
better weight
distribution linkage and
a lower center of
gravity.The 3-piece
tie-road steering linkage
offers sharp cornering
performance.Sticker sheet
included.Includes 60D
radial tires and silver
Rover Mini Cooper
wheels.ESC and type 540
motor included.2-channel
R/C system, battery pack
& charger are separately
required.A wide variety
of Option Parts for M-05
chassis machines and
bodies are already
available for further
customization.
Manufacturer: TamiyaModel
/ Part No.: 58438
Availability: In Stock
£116.99
Available
-
About the modelHigh
performance 2WD off road
buggy assembly
kit.4-wheel independent
double wishbone
suspension with oil
dampers secures stable
running.Suspension upper
arms use double-ended
shafts, enabling fully
adjustable camber
angle.TEU-101BK
electronic speed control
included with kit.Type
540 motor.Differential
gear gearbox is fully
sealed from dirt and
stones, ensuring a long
life of smooth
handling.Drive shaft
features joint cup made
of highly durable
metal.Full ball bearing
configuration offers
maximum engine
efficiency.Features wide
grooved front tires and
spiked rear tires for
excellent off-road
ability.Newly designed
body and wing shape
Wheels are racey off-road
dish type. Specs:Length:
384mmWidth: 248mmHeight:
140mmWheelbase:
260mmLowest Ground
Clearance: 26mmWeight:
1042gMotor: Type
540Drivetrain: Rear Wheel
DriveTread: (Front &
Rear) 216mm/208mm Diff.
Gear: 3-bevel
diff.Steering Tie Rod:
2-piece Suspension:
4-wheel Double
WishboneGear Ratio:
9.28:1Separately Required
2-Channel R/C System with
ESC 7.2V Racing Battery &
Charger Manufacturer:
TamiyaModel / Part No.:
58374
Availability: In Stock
£106.99
Available
-
DF-02 chassis DF-02
chassis featuring
longitudinally mounted
motor and battery. A
powerful Type 540 motor
combined with 4 oil
dampers means tough off
road running and fearless
aerial action. Semi ball
bearing gearbox is fully
sealed keeping dirt and
stones out for easy
maintenance and long
lasting performance. A
chassis for tough off
road running The DF-02
chassis is a shaft-driven
4WD chassis featuring a
longitudinally mounted
motor and battery.
Featuring an overall
lower center of gravity,
the DF-02 displays
superior stability and
handling. The chassis
also features a wide
bathtub design that
easily accommodates
battery and all R/C
mechanism. Semi ball
bearing gearbox is fully
sealed keeping dirt and
stones out for easy
maintenance and long
lasting performance. Oil
dampers and 4-independent
wheel suspension Oil
dampers and 4-independent
wheel suspension means
tough off road running
and fearless aerial
action. DF-02 chassis
features turnbuckle
tie-rod for easy toe
adjustment and oil
dampers mounted with 5mm
ball connectors. The
Rising Storm is the
perfect solution to enjoy
off-road racing. About
the Model Tamiya Radio
Control Rising Storm
Buggy kit. Simple
assembly following step
by step instructions
delivers expertise to
enable tuning, servicing
and repair. Full time 4
wheel drive for excellent
handling & performance
off roadOverall length:
395mmSecond release for
the shaft-driven 4WD
DF-02 chassis featuring
longitudinally mounted
motor and battery
layout.Low center of
gravity, wide bathtub
chassis and wide tread
provides extra stability
and superb
handling.Semi-bearing
drive train using 8 ball
bearings for reduced
friction leading to extra
speed.Steering linkage
uses turn-buckle shaft
for easy toe
adjustment.Kit includes a
Type-540 motor and
electronic speed
controller.Separately
sold option parts
including DF-02 Aluminum
Damper Set (Item 53701),
TT-01Aluminum Motor Heat
Sink (Item 53664) and
RS-540 Sport Tuned Motor
(Item 53068) can easily
turn this kit into a
high-performance racing
buggy.
Availability: In Stock
£92.99
Available
-
The Asmann Racing 1:10
Crawler Rock Ruler.
Nothing will stand in
your way as you bring any
obstacle under your tyres
or just simply knock it
out of the way! The
extremely powerful motor
really gets the Crawler
moving. The fully ball
raced chassis ensures
maximum stability on all
surfaces while keeping
the electronic components
well protected in the RC
box! Long suspension arms
with aluminium oil shocks
make for smooth driving
over even the bumpiest
terrain. Regardless of
the terrain you drive on,
the giant tyres
guarantee perfect
traction and grip on all
surfaces. The independent
wheel suspension has been
perfectly tuned to offer
optimal performance even
in the toughest of
terrains.FeaturesFour-wheel
steering55T crawler
motor2.2 tyres with
beadlock wheelsScale:
1:10Drive: 4WDLength: 430
mmWidth: 250 mmWheel
base: 320 mmClearance: 85
mmRequires 7.2v Race pack
and chargerManufacturer:
Ansmann RacingModel:
Crawler Rock Ruler Ready
To Run (124000017)Scale:
1:10
Availability: In Stock
£224.99
Available
-
Highly detailed assembly
RC Pick Up Truck kit4
Wheel drive with 3-Speed
TransmissionRealistic
ladder chassis with
independent suspension
with aluminium
dampersDetailed impact
resistant body shellMetal
front and rear
differential
gearsMulti-Function
Control Unit MFC-02
available separately
Manufacturer: TamiyaModel
/ Part No.: 58397
Availability: In Stock
£384.99
Archived Product
-
Tamiya XB This fantastic
model is ready built and
comes with all radio
gear, a battery and
charger. Simply put on
charge and you are ready
to go!!!! (No
construction
required)Front Wheel
Drive M-03 ChassisThe
M-03 chassis features a
front mounted motor for a
full front-wheel drive
chassis. 4-wheel
independent
double-wishbone
suspension provides
excellent handling, and
a large hole designed
into the middle of the
chassis ensures vital
weight savings. With a
mid-battery layout, the
M-03 features ideal
weight balance for superb
control and consistent
cornering. Set includes
trigger type transmitter
and electronic speed
controller along with
Power Pack & Charger for
a complete pre built
ready-to-run set.Basic
Specification:Overall
length: 322mm, Width:
166mm,
Height:135mmChassis:
Fully assembled M-03,
Drive Train: 2WD front
wheel driveSuspension:
4-wheel independent
double-wishbone, Damper:
friction typeSpeed
Controller: TEU-101BK
electronic speed
controllerMotor: High
performance 540 typeBody:
Polycarbonate body shell
fully painted and
pre-markedReplaceable
crystals allowing racing
between friends. Crystals
available
separatelyRequires 8 x AA
Batteries for
transmitterPower Pack &
Charger included
Manufacturer:
TamiyaModel: XB Mini
Cooper (57742)
Availability: In Stock
£154.99
Available
-
Of the many iterations of
the Toyota Land Cruiser,
the 1972 Land Cruiser 40
is particularly popular
thanks to its attractive
styling and has a large
fan base around the
world. This R/C model's
body is made from ultra
durable polycarbonate and
the actual vehicle's
front bumper and 35-inch
tires are accurately
reproduced to provide a
realistic scale
appearance. In addition,
2 white and 2 red LEDs
depict the head and tail
lights respectively,
further enhancing its
presence. The tough CC-01
chassis is equipped with
a front independent
double wishbone and rear
4-link rigid axle
suspension setup,
allowing you to enjoy
exciting cross-country,
off-road, and on-road
R/C action. Excellent
ground-hugging,
long-stroke suspension
system consists of front
double wishbone and rear
4-link rigid setups and
is equipped with 4 oil
dampers. Highly reliable
and efficient full-time
4WD system features a
front-mounted motor,
which transmits power to
the front wheels via the
gearbox and to the rear
wheels via the propeller
shaft with universal
joints. Front and rear
differentials enable
smooth cornering. For
even greater off-road
performance on rough
terrain, the rear
differential may be
locked during assembly.
Manufacturer: TamiyaModel
/ Part No.: 58445
Availability: In Stock
£169.99
Available
-
The Blackfoot-Xtreme is
equipped with a
reinforced polycarbonate
monocoque frame chassis.
This arrangement allows
easy access and
maintenance of gearbox
without disassembly. With
the battery located in
the middle of the
chassis, the
Blackfoot-Xtreme is
perfectly balanced for
rough riding. The
centrally positioned
servo ensures the equal
alignment of the steering
tie rods, improving
control. The four-wheel
double wishbone
suspension offers
flexible handling over
all road conditions. This
is a Big wheel off road
Pick up truck kit to be
built from kit form
following simple step by
step instructions. Build
process is fun,
educational and ensures
that servicing and
repairs may be carried
out with ease. Massive
ground clearance for off
road performance. Heavy
duty independent
suspension with coil
sprung shock absorbers. 2
Wheel drive transmission.
Pre assembled gear box
with differential.
Powerful electric motor &
electronic speed control.
Tyres pre mounted on
wheels. Giant paddle grip
off road semi pneumatic
tyres. Tough impact
resistant plastic body
shell. About the model
Pre-assembled gearbox for
quick and easy
assemblyGearbox can be
removed for maintenance
without disassembling
chassisHeavy parts
located in centre of
chassis for perfect
balance4-wheel double
wishbone suspension
featuring 4 friction
dampersInjection moulded
bodyElectronic Speed
ControlTotal length:
445mm, Total width:
310mm, Total height:
267mm.Chassis Material:
PolycarbonateTransmission
Type: 2WDIncludes one
Type 540 motor.Tire
Diameter F/R: Both 130mm
Required Items (Sold
Separately)R/C Unit:
Acoms 2-channel R/C
systemBattery: 7.2V
Racing Pack or equivalent
& Charger
Availability: In Stock
£116.99
Available
-
The Tamiya Wild Willy 2
is a reproduction of the
popular original Wild
Willy from the mid 80s.
The new Wild Willy has an
all new chassis and
larger tires allowing it
to tread over rough
terrain. Of course, the
Wild Willys trade mark is
the animated wheelie
capability thanks to an
all new wheelie bar.
Specifications Chassis:
WR-02Scale: 1/10Length:
12.80 inches
(325mm)Width: 12.20
inches (380mm)Wheelbase:
6.77 inches (172mm)Front
Tread: 7.87 inches
(200mm)Rear Tread: 7.87
inches (200mm)Weight:
3.77 lbs. (1710g)Chassis:
ABS MonocoqueSuspension:
4 wheel independentDamper
Type: Plastic coil over
frictionDrive Train: 2WD
gearboxGear Ratio:
18.3:1Differential Type:
Bevel GearMotor Included:
Electric type 540Speed
Controller Included: 3
Step F&R
MechanicalWheel/Tire
Type: Chrome/V-Lug
PatternBody Included:
Styrene (plastic) body is
molded in a military
green colorRadio Type:
2-Channel Surface Radio
(not included)Battery
Type: 7.2V Battery (not
included) Manufacturer:
TamiyaModel / Part No.:
58242
Availability: In Stock
£124.99
Available
-
Tamiya Sand
ScorcherFollowing on from
the release of the 30th
anniversary Rough Rider,
Tamiya is now proud to
announce the imminent
re-release their classic
Sand Scorcher.This 2010
version Sand Scorcher has
been carefully updated
while maintaining the
original features of the
chassis such as the
unique front double
trailing arms and rear
torsion suspension. R/C
fans hearts will
definitely race when they
see the classic VW Beetle
shape and relive the
dynamic performance of
this machine.Specs &
Features:This is an
Officially Licensed 1/10
scale R/C assembly kit of
the Sand Scorcher. Comes
equipped with full ball
bearings to reduce
friction loss. Type 540
motor included.Comes
loaded with many top
quality parts for
improved performance such
as:A duraluminum plate
reinforced 2mm thick FRP
main frame for added
strength and flexibility
to ensure stability.Newly
designed die-cast front
and rear suspension arms,
front axle, and wheel
hubs.Transparent case
protects the R/C
mechanisms. The lid can
be easily detached by cam
locks.Reinforced front
uprights.Redesigned oil
dampers.Original blister
pack style packaging.
Length: 15.7 in (400
mm)Width: 8.3 in (210
mm)Height: 5.9 in (150
mm) Weight: 3.8 lb (1730
g)Requires: 2-channel
radio with 1 servo,
6-cell battery, Charger,
8 "AA"
batteries and Paint
Manufactruer: TamiyaPart
Number: 58452
Availability: In Stock
£249.99
Available
-
Considering trying your
hand at RC off road? Then
it could well be time to
'step up' to the mark
with the exciting new
range of models called
Stinger from STEP UP.
Step Up have developed a
range specifically aimed
at the entry level and
cost conscious
enthusiast. First up is
the Stinger EB-1 1/10th
Truggy. A modular chassis
design as used on top
level 1/10th racing
buggies is used so that
the rear and front
suspension can be simply
removed from the chassis
in a matter of seconds.
In addition this design
provides a stiff 'box'
section for the whole
car's suspension to work
from. The gearbox
utilises a 3-gear design
comprising of a bevel
gear differential, idler
gear and top shaft. To
complete the section an
adjustable external
slipper clutch helps
protect the transmission
from shock damage.
Composite, oil filled
shocks are standard as is
quality r/ c radio system
and electronic speed
controller. Finished off
with a funky pre-printed
bodyshell of your choice.
The Stinger EST-1 Truggy
shares a common design
platform with the Stinger
EB-1 Buggy so spare parts
are kept to a minimum.
Areas such as wishbones,
hub carriers and steering
blocks have been designed
in a manor that allows
left and right to
interchange, so it is
irrelevant which side
might need replacing you
will never get left with
the wrong side from a
spare pair of arms. Want
to race you Stinger? Well
Step Up intends to
release a wide range of
options that will
ultimately allow you to
bring your ride up to a
whole new level of
performance as you
progress with your own
abilities. Step up and
call your local hobby
shop today and ask for
the new name in r/c cars
- Step Up. Step Up
Stinger Features:2
Channel pre-installed
radio Compact Electronic
Speed Controller comes as
standard 540 Motor Strong
and sturdy suspension
mouldings Moulded tub
modular chassis design
Oil filled shock
absorbers Pre-painted
bodyshell Spec
Check:Wheelbase:
362mm-368mmWidth:
415mmHeight: 910mm
Length: 550mm Scale:
1/10th Required for
completion: Charger,
7.2v Stick Pack Battery,
8 xAA Size Batteries.
CSU0002-3 Stinger EST-1
1/10th Scale 2WD Electric
RTR Truggy - Red
Availability: In Stock
£99.99
Available
-
The prominent figure of
the R/C car boom was the
Buggy Champ (Rough Rider)
which was first released
in 1979. Tamiya has
re-released the Buggy
Champ to celebrate the
car's 30th year
anniversary. The chassis
has been finely tuned
while maintaining the
original features of the
chassis such as the
unique front double
trailing arms and rear
torsion suspension. R/C
fans' hearts will
definitely race when they
see the nostalgic form
and relive the dynamic
performance of this
machine. Prouduct
Features1/10 R/C assembly
kitFull ball
bearingsESC540
motorDuralumin plate
reinforced 2mm thick FRP
main frameDie-cast front
and rear suspension arms,
front axle, and wheel
hubs have been newly
designed for this
re-releaseClear
transparent waterproof
case protects the R/C
mechanismReinforced front
uprightsRedesigned oil
dampersComes in the same
original blister pack
style packagingWhite
plastic easy-to-paint
body included (decal
sheet includes white
areas so no masking is
required)Requires TS
paintsLength: 400mm
Manufacturer: TamiyaModel
/ Part No.: 58441
Availability: In Stock
£259.99
Available
-
The Boomerang 2008 still
keeps the spirit of the
original Boomerang, but
has experienced a
makeover by replacing
older, harder to
assemble parts with
modern equivalents. For
improving steering
control and helping
minimising the effects of
shocks there are now more
efficient gear box,
drive shafts and axle
joints along with the new
placement of the drive
shaft. Furthermore with
the new chassis cover
it’s impossible for
dirt and debris to
interfere operations.
Take this updated
Boomerang out for a spin
and relive your
childhood! ESC and 540
motor included. 2-channel
R/C system, 7.2V battery
and charger separately
required. Details:
Length: 385mmWidth:
234mmHeight: 153mmWeight:
Approximately 1160gTread
Front and Rear: F196mm,
R194MMTire
width/diameter: F30/88mm
R38/88mmGear ratio: 8.7:
1 10.04:1 Manufacturer:
TamiyaModel / Part No.:
58418
Availability: In Stock
£136.99
Available
-
This monster truck comes
now in a special edition
that features a brilliant
metal plated body.
Characteristics for this
Super Clod Buster are the
twin-motor dual gearbox
4WD drive train, a
durable link-arm, 8 coil
springs and massive 165mm
dia. tires for powerful
and efficient performance
to overrun any obstacle.
2-channel R/C system,
7.2V battery and charger
separately required.
Manufacturer: TamiyaModel
/ Part No.: 58423
Availability: In Stock
£259.99
Available
-
Heavy duty ladder frame
features light weight
aluminium channels with
resin cross
members.Chassis &
suspension design offers
optimum ground
clearance.Coil spring
suspension system
features axle housings to
protect parts.Durable
aluminium suspension
arms.Inboard dampers
connected to suspension
via linkages & stabilizer
torsion bar for
balance.Centrally located
planetary gearbox with
40:5:1 final gear ratio
– 540 type motor.Bevel
geared front & rear gear
boxes.All new beadlock
wheels ensure secure tyre
attachment even at low
pressure.All new Rock
Crawling tyres – 125mm
diameter / 56mm tread.
Impact resistant
polycarbonate body with
side mirrors, indicators
& front grille.ESC,
2channel radio, battery
& charger required.
Manufacturer: TamiyaModel
/ Part No.: 58405
Availability: In Stock
£294.99
Available
-
The highly detailed
polycarbonate body
accurately captures the
powerful form of the BMW
M3 GT2.Side mirrors,
rear wing, and metal
plated light cases are
precisely
reproduced.Shaft driven
4-wheel drive TT-01
Type-E chassis gives this
electric R/C car superior
control and
handling.Accurately
reproduced wheels and
tires with tread pattern
are included.Each front
light case has one 5mm
and one 3mm LED Light
installation points. Each
rear light case has one
5mm and two 3mm LED Light
installation points.Comes
with LED Light Unit
TLU-01 (Item 53909) and 2
white and 2 red 5mm LED
lights (Total 4) are
included. *It is possible
to assemble with the
separately available LED
Light Control Unit TLU-02
which allows up to 16
pairs of LEDs (total 32
LEDs) to be
controlled.TEU-104BK ESC
and type 540 motor
included. 2-channel R/C
system, battery pack &
charger are separately
required. Manufacturer:
TamiyaModel / Part No.:
58449
Availability: In Stock
£154.49
Archived Product
-
Tamiya XB Wild Willy
(Ready To Run) (57743
)Tamiya XB This fantastic
model is ready built and
comes with all radio
gear, a battery and
charger. Simply put on
charge and you are ready
to go!!!! (No
construction required)-
Ready assembled Radio
Control car- 2 wheel
drive off road truck-
Independent Coil spring
suspension featuring rear
fiction dampers- Tough
ABS impact resistant body
shell- Designed for fun
off road
runningManufacturer:
TamiyaModel: XB WILD
WILLY (57743 )
Availability: In Stock
£164.99
Available
-
Length: 365mm, Width:
170mm, Height: 142mm
Wheelbase: 225mm (Middle
wheelbase).The sporty
form of the Abarth 500
comes precisely
reproduced with a
polycarbonate body and is
loaded on the new M-05
chassis.The uniquely
shaped side mirrors and
rear wing are accurately
represented.Polycarbonate
light case parts allow
installation of
separately available LED
lights.The servo,
receiver, and ESC are
mounted on the rear of
the newly designed
monocoque frame for
better weight
distribution and a lower
center of gravity.The
3-piece tie-rod steering
linkage offers sharp
cornering
performance.Sticker sheet
with chrome-effect
stickers included.TEU-104
BK ESC and type 540 motor
included.2-channel R/C
system, battery pack &
charger are separately
required.A wide variety
of Option Parts are
available for M-05
chassis machines are
already available for
further customization.
Manufacturer: TamiyaModel
/ Part No.: 58444
Availability: In Stock
£124.99
Available
-
Return of the Frog! First
introduced in 1983, the
2WD racing buggy Frog
made a huge splash with
its eye-catching design
and high performance
running. The Frog now
makes a comeback,
updated for a new age,
but with its basic
structure essentially
unchanged. Preserving its
characteristic space
frame, the oil dampers
for trailing-arm type
rear suspension have been
updated to diaphragm
type. Rear drive shaft
features dogbone type
joint for secure power
transmission. Sleek
polycarbonate body
remains the same, while
3-piece wheels feature
front grooved and rear
spike tires for excellent
off-road running. 2WD
Chassis Packed with
Innovation Electric R/C
racing buggy features ABS
space frame and nylon
suspension and bumper for
a lightweight yet rugged
form that is perfect for
off road running. Battery
is held in ultra-low
position, giving this
car the stability and
weight balance to handle
rough terrain and wild
jumps. Advanced 4-wheel
independent suspension
composed of front double
wishbone type featuring
in-board spring and
durable steel radius arm.
Rear trailing arm type
features horizontally
mounted aluminum cylinder
oil dampers for effective
shock absorbtion. Sealed
differential gearbox
ensures high speed
cornering, while full
gearbox ball bearings and
3-step gear ratio secures
maximum transmission
efficiency. About the
ModelIncludes TEU-101BK
ESC (Electronic Speed
Control)Includes
re-designed side aluminum
dampers inspired by TRF
shock design.Includes
re-designed dog-bone
style drive train with
original rubber
boots.Reintroducing the
original 2WD buggy
masterpiece featuring ABS
resin space frame,
horizontally mounted oil
dampers, inboard spring
type front
suspension.Powered by a
Type 540 motor.Kit
includes straight ribbed
racing front tires and
high-grip rear spiked
tires.Wheels are
realistic 3-piece
type.Includes diff gear.
Manufacturer: TamiyaModel
/ Part No.: 58354
Availability: In Stock
£119.99
Available
-
Nothing fancy, just a
simple ready-to-run car
that is affordable,
allowing you to enjoy the
RC experience. Ideal for
beginners and the young
this is a perfect entry
level radio control car
kit. Pre-assembled and
RTR, this 1/10th Scale
Electric Mitsubishi
Lancer Evo VII WRC
features a highly
detailed moulded shell,
with officially licensed
livery, and looks great
on the shelf or just
running around the
drive.Features 4WD
Central Shaft DriveBy
changing frequency
crystal, it can serve up
to 6 frequenciesDouble
wishbone suspensionFront
and rear bevel gear
differentialsMetal
dogbonesPainted and
decaled bodyControl: AM
Digital Proportional
Radio ControlSpeed: 35
km/hourMotor: 540 motor,
Mechanical Speed
Control(Electronic Speed
Control - option)Max
Range: 100 metersPower
Required: 8 x AA(Not
included), 7.2V battery
pack (Included)Requires 8
x AA batteries. HE0302
Electric RTR Mitsubishi
Lancer Evo VII WRC
Availability: In Stock
£83.49
Available
-
Team Associated's popular
Nitro TC3 Ready-to-Run,
winner of Radio Control
Car Action's 2003
"Reader's
Choice" award, has
been updated with even
more of the features
you've been asking for.We
upgraded to a more
powerful. 15 size engine,
added a new design
"Sure Shift"
2-speed transmission for
better acceleration and
higher top speed, and
redesigned the rear
suspension components for
more strength and
tuneability. We felt the
Nitro TC3 Plus should
look as good as it runs,
so we included chrome
8-spoke wheels, and
topped it off with a
Pro-Line "Crowd
Pleazer" body with
new, modern
sport-compact style
graphics.To make the
Nitro TC3 Plus an even
better value, we added a
free quick-fill Nitro
fuel filler bottle and a
rechargeable glow igniter
right in the box! Of
course, the NTC3 Plus is
fully upgradeable with
our extensive line of
Factory Team performance
components. And no other
RC manufacturer beats
Team Associated's
widespread replacement
parts
availability.Product
Features:Side-exhaust
manifold and
pipe.Pre-glued high-grip
treaded racing tires with
foam inserts.Associated
Electrics radio system
with Steering trim,
Throttle trim, Throttle
ATV high, Throttle ATV
low, Steering dual
rate.Ball
bearings.Protective front
bumper, composite
shocks, adjustable body
mounts, quick-fill fuel
tank.Pivot ball type
suspension with easily
adjustable caster,
camber and
toe-in.Interchangeable
front and rear hub
carriers.
Availability: In Stock
£289.99
Archived Product
-
Tamiya XB This fantastic
model is ready built and
comes with all radio
gear, a battery and
charger. Simply put on
charge and you are ready
to go!!!! (No
construction required)
The Tamiya XB Rising
Fighter inherits all its
great qualities and
excellent performance
from its predecessors The
Hornet (Item 58336) and
The Grasshopper (Item
58346) and also uses a
similar body of that to
other fighter series R/C
cars. About this
modelLength: 418mm,
Width: 236mm, Height:
187mm, Wheel base:
268mm, Weight:
1000g.Independent swing
axles for the front
suspension, a rolling
rigid rear suspension,
and large sized friction
dampers effectively
absorb shocks and
bumps.Bevel type diff
gear.Semi monocoque
structure acts as the
chassis strengthening
part (Screws are used to
secure the resin body to
the bathtub
chassis).Fully enclosed
gearbox preventing dirt
and debris from
interfering from
operation.Powered by a
540
motor.(included)Grooved
front tires and rear
spike tires ensure
excellent traction for
any surface.Stylish resin
molded body.-ESC and
Expec 2-channel R/C
system included.ELECTRIC
XB KITS INCLUDE:Radio:
2-Channel with
servo(s).Battery: 6-cell
flat with standard Tamiya
connector.Charger: Tamiya
6 Cell Mains Slow
Charger.Paint: Includes
fully painted body shell.
MANUFACTURER:
TamiyaModel: XB Rising
Fighter (57781)
Availability: In Stock
£144.99
Archived Product
-
C404007 FD PORSCHE
CARRERA GT3 RS Full
function ready to run R/C
car 2 speed gear selector
for fast acceleration or
high top speed 1:10 scale
licensed Porsche GT3
impact resistant body
Full spare parts back up
High spec radio equipment
Fast steering servo Fully
proportional High speed
motor Includes 9.6v 750
mAh Ni-mh pack Charger &
9v Tx battery
includedManufacturer:
CarsonProduct Code: 1:10
FD Porsche Carrera GT3 RS
(C404007)
Availability: In Stock
£94.99
Available
-
Considering trying your
hand at RC off road? Then
it could well be time to
'step up' to the mark
with the exciting new
range of models called
Stinger from STEP UP.
Step Up have developed a
range specifically aimed
at the entry level and
cost conscious
enthusiast. First up is
the Stinger EB-1 1/10th
Buggy. A modular chassis
design as used on top
level 1/10th racing
buggies is used so that
the rear and front
suspension can be simply
removed from the chassis
in a matter of seconds.
In addition this design
provides a stiff 'box'
section for the whole
car's suspension to work
from. The gearbox
utilises a 3-gear design
comprising of a bevel
gear differential, idler
gear and top shaft. To
complete the section an
adjustable external
slipper clutch helps
protect the transmission
from shock damage.
Composite, oil filled
shocks are standard as is
quality r/ c radio system
and electronic speed
controller. Finished off
with a funky pre-printed
bodyshell of your choice.
The Stinger EB-1 Buggy
shares a common design
platform with the Stinger
EST-1 Truggy so spare
parts are kept to a
minimum. Areas such as
wishbones, hub carriers
and steering blocks have
been designed in a manor
that allows left and
right to interchange, so
it is irrelevant which
side might need replacing
you will never get left
with the wrong side from
a spare pair of arms.
Want to race you Stinger?
Well Step Up intends to
release a wide range of
options that will
ultimately allow you to
bring your ride up to a
whole new level of
performance as you
progress with your own
abilities. Step up and
call your local hobby
shop today and ask for
the new name in r/c cars
- Step Up. Step Up
Stinger Features:2
Channel pre-installed
radio Compact Electronic
Speed Controller comes as
standard 540 Motor Strong
and sturdy suspension
mouldings Moulded tub
modular chassis design
Oil filled shock
absorbers Pre-painted
bodyshell Spec
Check:Wheelbase:
280mmWidth: 250mmHeight:
155mm Length: 391mm
Scale: 1/10th Required
for completion: Charger,
7.2v Stick Pack Battery,
8 xAA Size Batteries.
CSU0001-1 Stinger EB-1
1/10th Scale 2WD Electric
RTR Buggy - Silver/Blue
Availability: In Stock
£89.99
Available
-
Ready to assemble Radio
ControlShaft driven four
wheel driveIndependent
coil spring and damper
suspensionTT-01 Type E
Chassis designed for
performance and simple
constructionTough and
highly detailed
Polycarbonate bodyLED
front and rear lightsFull
range of Tuning Hop-up
parts available Shaft
driven four wheel drive
Manufacturer: TamiyaModel
/ Part No.: 58408
Availability: In Stock
£104.99
Available
-
Tamiya brings back
another R/C classic with
this Subaru BRAT.
Longtime fans will once
again experience the
nostalgia of their
childhood and beginners
can enjoy the easy
operation of this
colorful off-road truck.
About the Model
High-quality 1/10 R/C
assembly kit of the
Subaru BRAT, one of
Tamiya’s early R/C
creations.Same 2WD
chassis The Frog, with
4-wheel independent
suspension to handle
tough off-road
driving.Comes with two
body shells, one made of
plastic material similar
to the original BRAT for
a nostalgic feel and one
made from durable
polycarbonate
material.Type 540 motor
included. Electronic
Speed Control Unit
(TEU-101BK) also
included. Manufacturer:
TamiyaModel / Part No.:
58384
Availability: In Stock
£132.99
Available
-
Compact M-03L chassis
features front-mounted
motor and front-wheel
drive, just like the
actual MINI, to enable
realistic
handling.Easy-to-assembly
monocoque frame is made
from durable resin
material.4-wheel
independent double
wishbone suspension helps
produce the nimble
comering.New body parts
made from lightweight
polycarbonate accurately
reproduce the subtle
changes of the MINI
Cooper S 2006, including
hood scoop and
wing.Separately-molded
parts for side mirrors
ensure sharp detail.
Stylish wheels equipped
with synthetic rubber
radial tires.
Manufacturer: TamiyaModel
/ Part No.: 58400
Availability: In Stock
£99.99
Available
-
Team Associated SC10 RTR
1/10th Scale Ready-to-Run
2WD Electric Off-Road
Short Course Race Truck -
Ready LiftFinally, you
can now have Team
Associated's world-class
performance with true
scale authenticity in a
1:10 scale ready-to-run
electric truck! Team
Associated is proud to
bring to you the SC10, a
1/10th scale electric 2WD
off road, authentic
short course race-truck
that is ready-to-run.
Based on the 6-time ROAR
Nationals-winning RC10T4,
the engineers behind the
doors in Area 51 made the
SC10 both all show and
all go! The SC10 comes
ready-to-run with a
factory finished short
course race-truck body,
short course style wheels
and aggressive tread
multi-terrain tires, all
which have been designed
to look just like the
full-size race trucks
that run in short course
off-road series around
the country. The world of
high-performance 1/10th
scale electric R/C has
never before seen this
level of scale accuracy!
At first glance it's easy
to see that the SC10 is
another champion by
design! Features:Built on
the 6-time National
Champion RC10T4 platform
Authentic short course
replica racing truck body
Short course style wheels
and aggressive tread
multi-terrain scale tyres
with reinforced sidewalls
Realistic bumpers front
and rear for maximum
durability Durable front
and rear body mounts
[*]14 rubber-sealed ball
bearings Rugged steel
turnbuckles for quick and
easy suspension
adjustments AE logo mud
flaps 2.6:1 ratio gearbox
equipped with sealed gear
differential Efficient
dual-sided, externally
adjustable slipper clutch
Molded composite low-CG
chassis Hinged battery
hold-down strap fits
[*]NiMH and LiPo battery
packs Set-screw secured
antenna tube Fully
adjustable suspension
geometry Angled bellcrank
coplanar steering with
integral servo saver
Vertical ball end
roll-center adjustments
front and rear Blue
aluminum shock bodies
Steel rear dogbone drive
shafts XP2 radio system
with metal gear steering
servo XP SC200 digital
electronic
forward/reverse speed
controller with optional
LiPo low voltage cutoff
and optional reverse
lockout Reedy 17-turn
motor Spec Check:Length:
550mm Width: 293mm
Weight: 2080g Wheelbase:
327mm Internal Gear
Ratio: 2.6:1 Drive: 2WD
Track: 245mmRequired for
completion: Charger,
6-cell Battery Pack, 8
xAA Size Batteries.
AS7032 SC10 RTR 1/10th
Scale Ready-to-Run 2WD
Electric Off-Road Short
Course Race Truck - Ready
Lift
Availability: In Stock
£239.99
Available
-
Get Your 2WD Buggy Fix!
This release on our DT-02
chassis features a number
of upgrades that fans
will go buggy for! The
lightweight polycarbonate
body and wing feature a
sleek design making it
one of Tamiya's coolest
looking buggies. Oil
dampers, adjustable
upper arm and full ball
bearings mean that the
Desert Gator can handle
almost anything the track
can throw at it, while
the grooved front and
spiked rear tires give
you the grip and handling
to make the competition
eat your dust! Unlock the
Potential of the DT-02
Chassis! The lightweight
bathtub frame features
center-mounted R/C unit
and battery for lowered
center of gravity and
optimum balance. 4-wheel
independent double
wishbone suspension comes
with oil filled dampers,
while the upper arm uses
double-ended shaft to
allow camber angle
adjustment. Flat
underside allows great
skidding performance,
while highly responsive
suspension ensures
excellent road holding on
even the toughest
surfaces. Differential
gearbox is fully sealed
from dirt and stones,
ensuring a long life of
smooth handling. Full
ball bearing
configuration employs a
total of 14 bearings in
gear case and wheel
axles, ensuring that
motor power is
efficiently transmitted
to wheels. Features wide
grooved front tires and
high performance off-road
rear tires for enhanced
cornering and grip. Basic
SpecificationsLength:
384mm, width: 248mm,
height: 137mm, weight:
1142gWheelbase: 260mm,
ground clearance: 26mm540
Type electric
motorTransmission Type:
Rear 2 Wheel Drive Diff.
gear system: 3 bevel
diff, gear ratio:
9.28:1Tread: 216mm
(front), 208mm
(rear)Steering Tie Rod: 2
partSuspension: double
wishbone (front &
rear)Manufacturer:
TamiyaModel / Part No.:
58344
Availability: In Stock
£104.99
Archived Product
-
The Tamiya XB The Frog
was first introduced in
1983. Tamiya XB This
fantastic model is ready
built and comes with all
radio gear, a battery
and charger. Simply put
on charge and you are
ready to go!!!! (No
construction
required)About the
model:Reintroducing the
original 2WD buggy
masterpiece featuring ABS
resin space frame,
horizontally mounted oil
dampers, Inboard spring
type front
suspension.Double
wishbone, oil damper
trailing arm rear
suspension.Humorous body
is white and pink with
stickers
pre-applied.Differential
gear gearbox is fully
sealed from dirt,
ensuring a long life of
smooth handlingPowered by
a Type 540 motor.Kit
includes straight ribbed
racing front tires and
high-grip rear spiked
tires.Factory finished
kit includes Expec SP R/C
unit, wheel-type
transmitter and TEU-101
electronic speed
controller ELECTRIC XB
KITS INCLUDE:Radio:
2-Channel with
servo(s)Battery: 6-cell
flat with standard Tamiya
connectorCharger: Tamiya
6 Cell Mains Slow
ChargerPaint: Includes
fully painted body
shellManufacturer:
TamiyaModel: XB Frog
(57756)
Availability: In Stock
£174.99
Available
-
Tamiya Radio Control
Impreza kit. Simple
assembly following step
by step instructions
delivers expertise to
enable tuning, servicing
and repair. Working front
& rear LED lights. Full
time 4 wheel drive for
excellent handling &
performance Lightweight
and user-friendly TT-01
chassis for effortless
assembly.4WD shaft driven
bathtub chassis with coil
spring damped, 4-wheel
independent double
wishbone suspension and
sealed front and rear
differential
gearbox.Brand new
toolings for the new 2007
body, including
separately molded parts
for the side mirrors,
unique rear wing, and
lights casings. Includes
high-quality stickers for
sponsor logos and
eye-catching gold
10-spoke wheels.Includes
electronics speed
controller (TEU-101BK)
and type 540
motor.Includes LEDs for
head and tail lights that
turn on automatically
when the car is switched
or Add the TLU-02 Light
Control Unit (ITEM 53937)
for greater control of
light operations.Wide
variety of tune-up parts
are separately available
to customize your
machine. Manufacturer:
TamiyaModel / Part No.:
58390
Availability: In Stock
£97.99
Available
-
Includes UK 3-PIN
chargerBacked by industry
leading support from HPI
Racing UK, the new
Maverick range of RC
model cars and trucks is
a great way to get into
RC and get more for your
money! Designed and
refined by long time RC
enthusiasts, every
Maverick model is easy to
maintain, with a full
range of spares
available. Now you can
have some serious fun
with out spending serious
money! Get more fun and
value with Maverick from
HPI UK!You get real
performance and great RTR
functionality with every
car and truck.
Professionally designed
moulded tub chassis
provide durability and
provide a stable and
tough platform for a
strong 4WD shaft
drivetrain. Pre-built
oil-filled shock
absorbers and fully
independent double
wishbone suspension give
you supreme confidence on
all driving surfaces,
and the installed
electronics include
powerful motors and long
life battery packs for
plenty of fun!The Strada
family of 1:10th scale
cars, buggies, trucks
and truggies are based
around the same extremely
tough Strada moulded tub
chassis. The 4WD shaft
drivetrain gives full
power in all conditions,
and the sealed bevel gear
diffs let you have
maintenance free fun!
Maverick Strada kits
bring you all the
stability, performance
and ease of use that you
could ask
for!Specifications:-
MTX22 - AM 27Mhz 2
channel Steerwheel
Transmitter that includes
Steering and throttle
trims as well as channel
reverse. - MRX22 AM 27Mhz
2 channel Receiver- MS22
High strength steering
servo- MSC22 Electronic
Speed Controller is a
fully proportional high
frequency unit that has a
13 turn motor limit.
Safety features include a
temperature cut off and a
low voltage regulator.
The MSC22 is easy to
setup with a one touch
setup system and audible
tones as well as the LED
indicators.- MM22
Powerful 540 Brushed
Motor- MBP22 7.2v 1800mAh
NiMH Battery Stick Pack-
240v AC Charger- Fully
Detailed Instruction
ManualMaverick Strada XT
Kit Features:- Large
titanium anodised motor
heatsink- Moulded tub
chassis with optimised
weight distribution-
Fully adjustable racing
suspension- Easy access
all metal geared
differentials- Battery
strap will accept both
stick packs and side by
side cells- 8 x oil
filled re-buildable
shocks with progressive
springs- Special titanium
anodised shock tops-
Fully independent double
A arm wishbone
suspension- Tough c-hub
front steering knuckles-
Tough efficient 4wd shaft
drive train- Fully
ballraced drive train-
Aluminium titanium
anodised lightweight
centre shaft- 4 large all
terrain "paddle
block" tyres on
attractive multi spoke
wheels- Pre cut body
factory finished- Fully
adjustable titanium
turnbuckles all round-
Twin point steering with
integrated servo saver-
Large titanium anodised
motor heatsinkMV12203
Maverick Strada MT 1/10th
4WD Electric Monster
Truck RTR Items
Required:8 x AA
BatteriesManufacturer:
Maverick Model: Strada MT
1:10 RTR Electric Monster
Truck (UK) (MV12203)
Availability: In Stock
£114.99
Available
-
Includes UK 3-PIN
chargerBacked by industry
leading support from HPI
Racing, the new Maverick
range of RC model cars
and trucks is a great way
to get into RC and get
more for your money!
Designed and refined by
long time RC enthusiasts,
every Maverick model is
easy to maintain, with a
full range of spares
available. Now you can
have some serious fun
with out spending serious
money! Get more fun and
value with Maverick!You
get real performance and
great RTR functionality
with every car and truck.
Professionally designed
moulded tub chassis
provide durability and
provide a stable and
tough platform for a
strong 4WD shaft
drivetrain. Pre-built
oil-filled shock
absorbers and fully
independent double
wishbone suspension give
you supreme confidence on
all driving surfaces,
and the installed
electronics include
powerful motors and long
life battery packs for
plenty of fun!The Strada
family of 1:10th scale
cars, buggies, trucks
and truggies are based
around the same extremely
tough Strada moulded tub
chassis. The 4WD shaft
drivetrain gives full
power in all conditions,
and the sealed bevel gear
diffs let you have
maintenance free fun!
Maverick Strada kits
bring you all the
stability, performance
and ease of use that you
could ask
for!Specifications:-
MTX22 - AM 27Mhz 2
channel Steerwheel
Transmitter that includes
Steering and throttle
trims as well as channel
reverse. - MRX22 AM 27Mhz
2 channel Receiver- MS22
High strength steering
servo- MSC22 Electronic
Speed Controller is a
fully proportional high
frequency unit that has a
13 turn motor limit.
Safety features include a
temperature cut off and a
low voltage regulator.
The MSC22 is easy to
setup with a one touch
setup system and audible
tones as well as the LED
indicators.- MM22
Powerful 540 Brushed
Motor- MBP22 7.2v 1800mAh
NiMH Battery Stick Pack-
240v AC Charger- Fully
Detailed Instruction
ManualMaverick Strada TC
Kit Features:- Moulded
tub chassis with
optimised weight
distribution- Fully
adjustable racing
suspension- Easy access
all metal geared
differentials- Battery
strap will accept both
stick packs and side by
side cells- 4 x oil
filled re-buildable
shocks with progressive
springs- Special titanium
anodised shock tops-
Fully independent double
A arm wishbone
suspension- Tough c-hub
front steering knuckles-
Tough efficient 4wd shaft
drive train- Fully
ballraced drive train-
Aluminium titanium
anodised lightweight
centre shaft- 4 "cut
slick" tyres on
Attractive split 6 spoke
wheels- Pre cut body
factory finished- Fully
adjustable titanium
turnbuckles all round-
Twin point steering with
integrated servo saver-
Fully Adjustable
turnbuckles all round-
High speed rear
wingMV12204 Maverick
Strada TC 1/10th 4WD
Electric Touring Car RTR
Items Required:8 x AA
BatteriesManufacturer:
MaverickModel: Strada TC
1/10 RTR Electric Touring
Car (UK) (MV12204)
Availability: In Stock
£109.99
Available
-
Includes UK 3-PIN
chargerBacked by industry
leading support from HPI
Racing UK, the new
Maverick range of RC
model cars and trucks is
a great way to get into
RC and get more for your
money! Designed and
refined by long time RC
enthusiasts, every
Maverick model is easy to
maintain, with a full
range of spares
available. Now you can
have some serious fun
with out spending serious
money! Get more fun and
value with Maverick from
HPI UK!You get real
performance and great RTR
functionality with every
car and truck.
Professionally designed
moulded tub chassis
provide durability and
provide a stable and
tough platform for a
strong 4WD shaft
drivetrain. Pre-built
oil-filled shock
absorbers and fully
independent double
wishbone suspension give
you supreme confidence on
all driving surfaces,
and the installed
electronics include
powerful motors and long
life battery packs for
plenty of fun!The Strada
family of 1:10th scale
cars, buggies, trucks
and truggies are based
around the same extremely
tough Strada moulded tub
chassis. The 4WD shaft
drivetrain gives full
power in all conditions,
and the sealed bevel gear
diffs let you have
maintenance free fun!
Maverick Strada kits
bring you all the
stability, performance
and ease of use that you
could ask
for!Specifications:-
MTX22 - AM 27Mhz 2
channel Steerwheel
Transmitter that includes
Steering and throttle
trims as well as channel
reverse. - MRX22 AM 27Mhz
2 channel Receiver- MS22
High strength steering
servo- MSC22 Electronic
Speed Controller is a
fully proportional high
frequency unit that has a
13 turn motor limit.
Safety features include a
temperature cut off and a
low voltage regulator.
The MSC22 is easy to
setup with a one touch
setup system and audible
tones as well as the LED
indicators.- MM22
Powerful 540 Brushed
Motor- MBP22 7.2v 1800mAh
NiMH Battery Stick Pack-
240v AC Charger- Fully
Detailed Instruction
ManualMaverick Strada XB
Kit Features:- Large
titanium anodised motor
heatsink- Moulded tub
chassis with optimised
weight distribution-
Fully adjustable racing
suspension- Easy access
all metal geared
differentials- Battery
strap will accept both
stick packs and side by
side cells- 4 x oil
filled re-buildable
shocks with progressive
springs- Special titanium
anodised shock tops-
Fully independent double
A arm wishbone
suspension- Tough c-hub
front steering knuckles-
Tough efficient 4wd shaft
drive train- Fully
ballraced drive train-
Aluminium titanium
anodised lightweight
centre shaft- 4
"stud block"
tyres on Attractive 5
spoke wheels- Pre cut
body factory finished-
Fully adjustable titanium
turnbuckles all round-
Moulded adjustable rear
wing posts and body
mount- Twin point
steering with integrated
servo saver- Moulded 1
piece rear wingMV12201
Maverick Strada XB 1/10th
4WD Electric Buggy
RTRItems Required:8 x AA
BatteriesManufacturer:
MaverickModel: Strada XB
1/10 RTR Electric Buggy
(UK) (MV12201 )
Availability: In Stock
£109.99
Available
-
With 3-Pin UK 240V
ChargerThe latest
Maverick kit is the
fantastic Strada SC 4WD
short course truck!
'Short Course' trucks are
the latest rage to
dominate the off-road
racing scene, in both
full-size and RC versions
- the enclosed arena
layouts, multiple jumps,
sideways drifting action
and touring car-style
driver match-ups make it
a thrilling spectacle to
watch, and now hobbyists
can match that excitement
in 1/10th scale with the
Strada SC!With
industry-leading support
directly from HPI Racing
UK, the entire range of
Maverick RC cars and
trucks is a wonderful way
to get tremendous bang
for your buck and have
fun at the same time!With
the Strada SC, you'll be
on the track and racing
with your short course
truck-driving friends in
no time! Every kit comes
fully painted, complete
assembled and fitted with
top-quality radio gear
that lets you rip through
the corners, bang
bumpers and get airtime
quickly and totally
pain-free!The Strada SC
is 1:10th scale, meaning
you can run it with all
other 1:10th scale cars,
buggies, trucks and
truggies that you'll find
at most RC tracks. It's
the ideal size for fun!
The Strada SC is built on
the extremely tough
Strada moulded tub
chassis, with a strong
4WD shaft drivetrain that
gives full power in all
conditions, and the
sealed bevel gear diffs
let you have maintenance
free fun! Maverick Strada
kits bring you all the
stability, performance
and ease of use that you
could ask
for!Specifications:-
MTX22 - AM 27Mhz 2
channel Steerwheel
Transmitter with steering
and throttle trim and
channel reverse- MRX22 AM
27Mhz 2 channel Receiver-
MS22 High strength
steering servo- MSC22
Electronic Speed
Controller is a fully
proportional high
frequency unit that has a
13 turn motor limit.
Safety features include a
temperature cut off and a
low voltage regulator.
The MSC22 is easy to
setup with a one touch
setup system and audible
tones as well as the LED
indicators.- MM22
Powerful 540 Brushed
Motor- MBP22 7.2v 1800mAh
NiMH Battery Stick Pack-
240v AC Charger- Fully
Detailed Instruction
ManualMaverick Strada SC
Kit Features:- Moulded
tub chassis with
optimised weight
distribution- Large front
and rear bumpers- Fully
adjustable racing
suspension- Easy access
all metal geared
differentials- Large
titanium anodised motor
heatsink- Battery strap
will accept both stick
packs and side by side
cells- 4 x oil filled
re-buildable shocks with
progressive springs-
Special titanium anodised
shock tops- Fully
independent double A-arm
wishbone suspension-
Tough C-hub front
steering knuckles- Tough
efficient 4wd shaft drive
train- Fully ballraced
drive train- Aluminium
titanium anodised
lightweight centre shaft-
Tough chevron-studded
tyres on cool mesh
wheels- Pre cut body
factory finished- Fully
adjustable titanium
turnbuckles all round-
Moulded adjustable rear
wing posts and body
mount- Twin point
steering with integrated
servo saverMV12205 Strada
SC 1/10 RTR Electric
Short Course Truck With
3-Pin UK 240V
ChargerItems Required:8 x
AA BatteriesManufacturer:
MaverickModel: Strada SC
1/10 RTR Electric Short
Course Truck (MV12205)
Availability: In Stock
£119.99
Archived Product
-
The Carson FD Dirt Fox
Monster Truck in 1:10
scale is the latest
addition to the range of
Carson off road electric
radio control monster
trucks.This rc model off
road truck comes complete
with a a 9.6 volt 750 Mah
Ni-mh battery pack and
mains charger. It
features all new radio
gear with a fast steering
servo that is fully
proportional and has a
fast motor also. This car
is based on the old
Tamiya QD chassis.
MANUFACTURER: Carson
Model: C404003 FD Dirt
Fox Monster Truck Scale:
1:10
Availability: In Stock
£89.99
Available
-
The TT01D is based on the
lightweight and
user-friendly TT-01
chassis for effortless
assembly. The sleek and
stylish customized super
car is now a fully
ready-to-run high
performance machine. 4WD
shaft driven bathtub
chassis with coil spring
damped, 4-wheel
independent double
wishbone suspension and
sealed front and rear
differential gearbox.
Drift-spec modifications
include special
suspension tuning, full
ball bearings,
sport-tuned motor,
aluminum heat sink, CVA
mini shock dampers and
short springs and
adjustable upper arms.
Polycarbonate body
captures the GT-R's
beautiful shape including
parts such as the front
and rear fenders, wing,
and the hood's air
outlet. Includes LED
Light Unit (TLU-01) and 2
x white LED's (Front) and
2 x red LED's (Rear).
Manufacturer: TamiyaModel
/ Part No.: 58419
Availability: In Stock
£144.99
Available
-
As well as all the
features found on the
standard Bug Crusher this
pro version includes the
following:Polished
Aluminium Tuned Exhaust
PipeSteel Universals
Drive ShaftsAluminium
Upper ChassisAluminium
Front Suspension Upper
ArmsAluminium Front
Suspension Lower
ArmsAluminium Front Upper
Arm MountAluminium Rear
Suspension Upper
ArmsAluminium Rear
Suspension Lower
ArmsAluminium Pro Shock
AbsorbersAluminium
Exhaust PipeAluminium
Wheel HexesAluminium 4mm
Flanged Lock
NutRechargeable battery
pack and charger for the
electronicsNitrotek
models come with high
quality Team Infinity
engines. Team Infinity
engines are made in Japan
and feature a simplified
carb that makes them the
easiest to start and most
reliable engines on the
market. Nitro engines
usually have two or more
tuning needles but these
only have a single
adjustment that makes
them much easier to use
without sacrificing any
power.We have had our
Nitrotek models kited out
with traditional stick
type controllers whereas
the Acme range come with
the new wheel type
controllers. This is a
personal choice of what
you are more comfortable
with.Specifications:Length:
400mmHeight: 185mmWidth:
310mmWheelbase: 275mmGear
Ratio 1 Speed:
13.34:1Ground Clearance:
30mmTyres: 60mm width
120mm diameterRadio:
Stick typeEngine:
Infinity. 18 Required to
use:Fuel, glow start
(both optional below) and
8 normal aa
batteries.Features:All
the top features of the
standard Bug Crusher plus
loads of hop ups
pre-installed as listed
above!High performance
Infinity 18
EngineTraditional stick
controllerBattery pack
for electrics
Availability: In Stock
£179.99
Available
-
This is the great looking
and even better
performing HSP nitro
radio controlled buggy.
The buggy is extra tough
and a good all rounder
performing well both on
road and off. The
Backwash is feature
packed making it one of
the top spec buggies on
the market and the. 18
engine along with the
automatic 2 speed gearbox
makes it extremely quick.
Please note there are two
other cheaper versions of
the HSP nitro buggy but
this is the top of the
range one that has the
two speed gearbox and
also the pivot ball
suspension. These also
have our Nitrotek
upgrades on them such as
the chrome finished
wheels, Infinity engine
and stick type
transmitter. The Backwash
comes fully built with
everything included apart
from fuel, glow start
(both optional below) and
12 normal AA
batteries.Nitrotek
versions of this nitro
radio controlled buggy
have been upgraded with
high quality Team
Infinity engines. Team
Infinity engines are made
in Japan and feature a
simplified carb that
makes them the easiest to
start and one of the most
reliable engines on the
market. Usually these
models come with engines
made in Taiwan or China
that you will see being
offered by other model
shops selling these but
from our experience we
have found the extra few
pounds for a Japanese
engine is well worth it
for the difference in
quality and
performance.We have had
our Nitrotek versions of
the Backwash kited out
with traditional stick
type controllers whereas
the standard versions
come with the wheel type
controllers. This is a
personal choice of what
you are more comfortable
with.Specifications:Length:
400mmHeight: 160mmWidth:
250mmWheelbase: 275mmGear
Ratio 2 Speed: 5.84:1(H)
8.58:1(L)Ground
Clearance: 26mmFront
Tyres: 32mm width 86mm
diameterRear Tyres: 40mm
width 86mm diameterRadio:
Stick typeEngine:
Infinity. 18 Required to
use:Fuel, glow start
(both optional below) and
12 normal aa
batteries.Features:Pivot
Ball suspensionAssembled
Oil-filled aluminium
shocks2.5mm thick
anodised aluminium
chassisComposite Tuned
PipePre-painted body with
decals
appliedSuper-efficient
4WD shaft-drive75 cc fuel
tank with splash guard2
speed automatic
gearboxHollow light
weight flywheelSlipper
clutch system to protect
spur gearHigh impact &
high traction
electroplated wheelsFiber
disc brake for extra
stopping powerFront and
rear hardened metal drive
gearsSealed radio box
protects the
electronicsAdjustable
steel turnbucklesHigh
performance Infinity 18
EngineTraditional stick
controller.
Availability: In Stock
£139.99
Available
-
The MG10 TR2 is the
upgraded version of the
original MG10 Stadium
Truck and features CEN's
proven 'HIC' (High Impact
Composite) chassis design
which is both flexible
and tough, perfect for
typical off-road running!
Now fitted with higher
grip, new pattern tyres
and a powerful Corsa 18S
pullstart engine with
twin-needle slide
carburettor, plus the
latest Skyion DX Pro
feature-packed computer
radio, there's never
been a better time to own
an MG10! Features:•
Supplied factory
assembled• HIC (High
Impact Composite) chassis
is flexible, yet
tough• Factory painted
and decaled polycarbonate
body shell• Skyion 3Ch
DX-Pro computer radio*•
All shaft, constant
4WD• Corsa 18S
pullstart engine with
twin-needle
carburettor• Composite
tuned pipe• Adjustable
Slipper Clutch•
Composite Brake Disc• 2
x Bevel-gear
differentials• Laydown
steering servo lowers C
of G and increases
stability• 75cc
flip-top fuel tank•
Pivot-ball suspension
system allows for easy
setup changes• Wide
track suspension arms for
added stability•
Independent, long-reach
oil filled shocks
(adjustable)•
Dust-proof radio/battery
box protects onboard R/C
from track debris•
Ballraced *Features: LCD
Display, 10 Model
Memory, Digital Trims,
Servo Reversers,
Steering Dual Rates, EPA
(End Point Adjustment),
ATL (for Braking),
Assignable Digital Trim
Switches, ABS (Anti-Lock
Braking) Required for
operation (Not Included):
12 x AA batteries,
glowstart, fuel
Manufacturer:
RipmaxModel: MG10-TR2
Stadium Truck 4WD GP RTR
(C-CEN8564)
Availability: In Stock
£164.99
Available
-
The Ansmann 1:10 Royal
Flash always guarantees
the best traction and the
extra-long shocks allow
for jumps with great
height and distance. No
matter how high the jump,
landings are always
smooth so you can
continue immediately full
throttle ahead.The
high-rpm ”Speed-Racer
RS“ motor accelerates
your Royal Flash so
powerfully that the only
evidence it‘s passed
through is the cloud of
dust it leaves behind. If
you want to have the most
innovative Electric
Off-roader, then
you‘ve found it right
here. The Royal Flash RTR
is fully assembled and
ready to run. What‘s
more, this off-roader is
loaded with awesome
details.Ready to run 4WD
truggy featuring oil
filled dampers and Speed
Racer RS motor. Add your
own battery pack and it's
ready to hit the
dirt!Product
Features:Heavy duty oil
filled dampersFinished
bodySpeed Racer RS
motorBall bearingsRear
CVD shaftsPivot ball
suspension2 channel 40MHz
radioHigh quality
steering servoESCLength
400mmWidth 310mmWheel
base 260mmGround
clearance 50mmRequires
7.2v Race pack and
charger Manufacturer:
Ansmann RacingModel:
Royal Flush RTR
(124000005)Scale: 1:10
Availability: In Stock
£114.99
Available
-
The Ansmann Racing 1:10
Hot Rod ready to run
version is great.
Experience the
fascination of driving
the Hot Rod!The chassis
has oil filled shocks and
four wheel independent
suspension with
suspension arms made of
sturdy ABS plastic
material. The heaviest
weights such as the motor
and battery are centred
to deliver predictable
handling. The gearbox is
sealed to protect it from
dust and stones. Product
Features: Fully assembled
2WD Hot RodFactory
painted body shell in
classic Hot Rod flame
designAnsmann W4
steerwheel 40AM RC
systemAnsmann Sirius SE
ESCAnsmann Clash 540 type
motorOil filled coil-over
shocksTough plastic
componentsAdjustable
turnbuckles & tie
rodsMoulded tub style
chassisSealed gear
box48dp transmission
gears with ball
differentialAdjustable
slipper clutchCVD rear
drive shafts12mm hex
wheel fitment front &
rear2.2 inch chrome
5-spoke wheelsPre-glued
radial tyresDetailed
assembly instruction
manualRequires: Battery &
charger Manufacturer:
Ansmann RacingModel: Hot
Rod RTR (124000008)Scale:
1:10
Availability: In Stock
£109.99
Available
-
Radio control monster
power at an affordable
price! This 4WD Monster
Truck from Hobby Engine
is great for young RC
fans looking for an entry
level radio control
monster truck.Spec
Check:Digital
Proportional SystemScale
1:103-speed
selectableSpeed up to
40km/hourCentre cover for
extra protection for
water and sandChangeable
crystal2 x 540
motorsFront and rear
bevel differentialsDouble
wishbone
suspensionMechanical
speed control7.2v 1700mah
Ni-Cd battery includedAC
Charger included HE0309
4WD Monster Truck RTR
Availability: In Stock
£94.99
Available
-
The Ansmann Racing 1:10
X4 Pro chassis has
threaded oil shocks and
four wheel independent
suspension with
triangular control arms
made of sturdy ABS
plastic material. The
heaviest parts such as
the motor and battery are
centred to deliver agile
and predictable handling.
This also adds to the
jumping characteristics
as the nose and tail
don‘t dip too deeply
for a steady flight path.
The gearbox is sealed to
protect it from dust and
stones. This model offers
demanding drivers a wide
range of adjustment
options to fine-tune the
vehicle for any track. On
cross-country runs or
spectacular jumps the X4
Pro is in its
element.Product
FeaturesOil
shocksOptimised front
axle geometry improves
the steering response and
increases the
rigidityAdjustable
slipperBody: clearScale:
1:10Drive: 4WD
(all-wheel)Length: 408
mmWidth: 245 mmWheel
base: 283 mmClearance: 32
mmRequires 2 Channel RC
Unit540
motorTyresElectronic
speed controller
(ESC)7.2v Race pack and
chargerPaint and tools to
build kitManufacturer:
Ansmann RacingModel: X4
Pro Kit (122000015)Scale:
1:10
Availability: In Stock
£179.99
Archived Product
-
The Ansmann Mad Rat RTR
is a 1:10 radio
controlled 2WD off-road
buggy by Ansmann. The rc
kit comes prebuilt with
all radio equipment and
only requires a few items
before you can drive this
fantastic off-road
buggy.Product
Specification:Covered
Drive Train.Oil Filled
Dampers.Ball
Differential.540 Type
Motor Included.Slipper
Clutch.Pre Painted
Shell.Improved Build
Manual for
Beginners.Optional Parts
Available.ELECTRIC KITS
REQUIRE:(unless stated
differently
above)Battery: 6-cell
flat with standard Tamiya
connectorCharger: AC/DC
timed or peak for 6-cell
batteryManufacturer:
AnsmannModel: 124000006
Mad Rat RTRScale: 1:10
Availability: In Stock
£94.99
Available
-
The Ansmann Racing 1:10
Hot Rod in one of the
best interpretations of
the American car model in
the model making
industry. Its flame
design and detailed body
make it one of the finest
street racers. Power is
transferred directly from
the motor via the rear
axle for optimum power.
On the street the Hot Rod
is a devilishy aggressive
vehical. Take a test
drive yourself and burn
up some asphalt.Required
EquipmentLiPo Battery
Pack Battery Charger 8x
AA Batteries
Manufacturer: Ansmann
RacingModel: Hot Rod 2WD
On Road RTR Brushless
(124000021)Scale: 1:10
Availability: In Stock
£179.99
Available
-
The Ansmann Racing 1:10
Hot Rod ready to run
version is great.
Experience the
fascination of driving
the Hot Rod!The chassis
has oil filled shocks and
four wheel independent
suspension with
suspension arms made of
sturdy ABS plastic
material. The heaviest
weights such as the motor
and battery are centred
to deliver predictable
handling. The gearbox is
sealed to protect it from
dust and stones.
Features:Self assembly
2WD Hot Rod kitFactory
painted body shellAnsmann
Clash 540 type motorOil
filled coil-over
shocksTough plastic
componentsAdjustable
turnbuckles & tie
rodsMoulded tub style
chassisSealed gear
box48dp transmission
gears with ball
differentialAdjustable
slipper clutchCVD rear
drive shafts12mm hex
wheel fitment front &
rear2.2 inch chrome
5-spoke wheelsPre-glued
radial tyresDetailed
assembly instruction
manualRequires: RC
system, ESC, Battery &
charger to opperate.
MANUFACTURER: Ansmann
RacingModel: Hot Rod Kit
(122000011)Scale:
1:10
Availability: In Stock
£54.99
Available
-
Thunder across the
terrain with the MAD RAT
and experience the
fascination of this 2WD
off-road vehicle.The
chassis has oil shocks
and four wheel
independent suspension
with triangular control
arms made of sturdy ABS
plastic material. The
heaviest weights such as
the motor and battery are
centred to deliver agile
and predictable
handling.This also adds
to the jumping
characteristics as the
nose and tail don't dip
too deeply for a steady
flight path.The gearbox
is sealed to protect it
from dust and stones. A
big spoiler adds
additional stabilization
to the vehicle.Required
EquipmentLiPo Battery
Pack Battery Charger 8x
AA Batteries
Manufacturer:
AnsmannModel: Mad Rat
Brushlessc Ready To Run
(124000011) Scale: 1/10
Availability: In Stock
£157.49
Available
-
Ansmann Racing Mad Rat
RTR ComboCombo Packs are
ready to run out of the
box! No need to purchase
anything else!These combo
packs come with a battery
and charger kit
recommended by
MyHobbyStore.Products
Included1. The Ansmann
Mad Rat RTRThe Ansmann
Mad Rat RTR is a 1:10
radio controlled 2WD
off-road buggy by
Ansmann. The rc kit comes
prebuilt with all radio
equipment and only
requires a few items
before you can drive this
fantastic off-road
buggy.Product
Specification:Covered
Drive Train.Oil Filled
Dampers.Ball
Differential.540 Type
Motor Included.Slipper
Clutch.Pre Painted
Shell.Improved Build
Manual for
Beginners.Optional Parts
Available.2. Ansmann
Racing Delta Pro 6 Mains
Fast Battery ChargerThe
Ansmann Racing Delta Pro
6 Mains Fast Charger is a
radio control battery
charger. Features:
Charges 7.2 volt nicads
or NiMH batteries, comes
complete with a Tamiya
plug. Charging current:
900mAh. Image shows EU
model, our model comes
with UK
plug. Manufacturer:
Ansmann RacingModel:
Delta Pro 6 Mains Fast
Charger (152100080)3.
Ansmann Racing Pack 7.2V
- 2000 mAh NiMH Battery
Availability: In Stock
£112.98
Archived Product
-
The Ansmann 1:10 Mad Rat
- 2WD Electric Buggy Kit
comes in a kit for you to
build.Thunder across the
roughest of terrain with
the Mad Rat and
experience the
fascination of this 2WD
off-road vehicle.The
chassis has oil filled
shocks and four wheel
independent suspension
with suspension arms made
of sturdy ABS plastic
material. The heaviest
weights such as the motor
and battery are centred
to deliver agile and
predictable handling.
This also adds to the
jumping characteristics
as the nose and tail
don`t dip too deeply for
a steady flight path. The
gearbox is sealed to
protect it from dust and
stones. A big spoiler
adds additional
stabilization to the
vehicle.Product
Features:Partly assembled
2WD off-road buggyAnsmann
Clash 540 type motorOil
filled coil-over
shocksTough plastic
componentsAdjustable
turnbuckles & tie
rodsMoulded tub style
chassisSealed gear
box48dp transmission
gears with ball
differentialAdjustable
slipper clutchCVD rear
drive shafts12mm hex
wheel fitment front &
rear2.2 inch racing dish
wheelsHigh grip pin-spike
rear tyresRibbed front
tyresDetailed assembly
instruction
manual*Requires: Battery
& charger 2 channel radio
system and ESC to
opperateBattery: 6-cell
flat with standard
connectorCharger: AC/DC
timed or peak for 6-cell
batteryManufacturer:
AnsmannModel: 122000007
Mad Rat KitScale: 1:10
Availability: In Stock
£44.99
Available
-
Thunder across the
roughest of terrain with
the Macnum and experience
the fascination of this
2WD off-road vehicle. The
chassis has oil filled
shocks and four wheel
independent suspension
with suspension arms made
of sturdy ABS plastic
material. The heaviest
weights such as the motor
and battery are centred
to deliver agile and
predictable handling.
This also adds to the
jumping characteristics
as the nose and tail
don`t dip too deeply for
a steady flight path. The
gearbox is sealed to
protect it from dust and
stones. A big spoiler
adds additional
stabilization to the
vehicle. Features:Self
assembly 2WD off-road
Truggy kitFactory painted
body shell and
spoilerAnsmann 540 type
motorOil filled coil-over
shocksTough plastic
componentsAdjustable
turnbuckles & tie
rodsMoulded tub style
chassisSealed gear
box48dp transmission
gears with ball
differentialAdjustable
slipper clutchCVD rear
drive shafts12mm hex
wheel fitment front &
rear2.2 inch racing dish
wheelsHigh grip pin-spike
rear tyresRibbed front
tyresDetailed assembly
instruction
manualRequires: RC
system, ESC, battery &
charger to opperate
Manufacturer:
AnsmannModel: 122000008
Macnum Kit Scale: 1/10
Availability: In Stock
£44.99
Available
-
The Ansmann Racing 1:10
Master Smacker is the
latest development of its
notorious predecessor.
The power transmisiion
takes place via a
smooth-running prop
system. The spur gear is
completely encased in a
hard plastic covering
that protects the
drivetrain from unwanted
impacts. The upper
chassis plate with a
green anodised design
gives the entire chassis
the required torsional
strength.It's simply even
better suited than its
predecessor for rough,
rocky off-road terrain.
The front and rear axles
are each equipped with a
smooth running
differential gear. Both
differentials are
designed as high quality
bevel differentials.The
actual drivetrain is
positioned exactly in the
centre of the chassis.
The entire chassis layout
is set up in such a way
that the chassis balance
arounf the diagonal and
longitudinal axis is
completely neutral. The
model uses both batteries
and saddle packs.Required
Equipment:LiPo Battery
PackBattery Charger8x AA
BatteriesManufacturer:
Ansmann RacingModel:
Master Smacker RTR
(124000015)Scale: 1:10
Availability: In Stock
£184.99
Available
-
The Ansmann Racing 1:10
Master Smacker4WD buggy
kit featuring oil filled
dampers and Speed Racer
RS motor. Master Smacker
is the latest development
of its notorious
predecessor. The power
transmission takes place
via a smooth-running prop
system. The spur gear is
completely encased in a
hard-plastic covering
that protects the
drivetrain from unwanted
impacts. The upper
chassis plate with a
green anodised design
gives the entire chassis
the required torsional
strength.Simply even
better suited than its
predecessor for rough,
rocky off-road terrains.
The front and rear axle
are each equipped with a
smooth-running
differential gear. Both
differentials are
designed as high-quality
bevel differentials.The
actual drivetrain is
positioned exactly in the
centre of the chassis.
The entire chassis layout
is set up in such a way
that the chassis balance
around the diagonal and
longitudinal axis is
completely neutral. The
model uses both stick
batteries and saddle
packs.FeaturesOil filled
dampersFinished bodySpeed
Racer RS motorBall
bearingsRear CVD
shaftsPivot ball
suspensionLength
390mmWidth 240mmWheel
base 265mmRequires 2
Channel RC UnitElectronic
speed controller (ESC)
suitable for 21T
motor7.2v Race pack and
chargerTools to build
kitManufacturer: Ansmann
RacingModel: Master
Smacker kit
(122000004)Scale: 1:10
Availability: In Stock
£58.99
Available
-
The Ansmann Racing 1:10
ready assembled 4WD buggy
featuring oil filled
dampers and Speed Racer
RS motor. Add your own
battery pack and it's
ready to hit the
dirt!Master Smacker is
the latest development of
its notorious
predecessor. The power
transmission takes place
via a smooth-running prop
system. The spur gear is
completely encased in a
hard-plastic covering
that protects the
drivetrain from unwanted
impacts. The upper
chassis plate with a
green anodised design
gives the entire chassis
the required torsional
strength. simply even
better suited than its
predecessor for rough,
rocky off-road terrains.
The front and rear axle
are each equipped with a
smooth-running
differential gear. Both
differentials are
designed as high-quality
bevel differentials.The
actual drivetrain is
positioned exactly in the
centre of the chassis.
The entire chassis layout
is set up in such a way
that the chassis balance
around the diagonal and
longitudinal axis is
completely neutral. The
model uses both stick
batteries and saddle
packs. FeaturesOil filled
dampersFinished bodySpeed
Racer RS motorBall
bearingsRear CVD
shaftsPivot ball
suspension2 channel
radioESCLength 390mmWidth
240mmWheel base 265mm
Requires 7.2v Race pack
and charger Manufacturer:
Ansmann Racing Model: Hot
Rod RTR (124000008)Scale:
1:10
Availability: In Stock
£109.99
Available
-
The Ansmann Racing 1:10
Royal Flash always
guarantees the best
traction and the
extra-long shocks allow
for jumps with great
height and distance. No
matter how high the jump,
landings are always
smooth so you can
continue immediately full
throttle ahead.The
high-rpm ”Speed-Racer
RS“ motor accelerates
your Royal Flash so
powerfully that the only
evidence it‘s passed
through is the cloud of
dust it leaves behind. If
you want to have the most
innovative Electric
Off-roader, then
you‘ve found it right
here. 4WD truggy kit
featuring oil filled
dampers and Speed Racer
RS motor.FeaturesHeavy
duty oil filled
dampersFinished bodySpeed
Racer RS motorBall
bearingsRear CVD
shaftsPivot ball
suspensionLength
400mmWidth 310mmWheel
base 260mmGround
clearance 50mm Requires 2
Channel RC UnitElectronic
speed controller (ESC)
suitable for 21T
motor7.2v Race pack and
chargerTools to build
kitManufacturer: Ansmann
RacingModel: Royal Flush
Kit (124000006)Scale:
1:10
Availability: In Stock
£58.99
Available
-
The Ansmann Racing 1:10
Rock Ruler Crawler.
Nothing will stand in
your way as you bring any
obstacle under your tyres
or just simply knock it
out of the way! The
extremely powerful motor
really gets the Crawler
moving. The fully ball
raced chassis ensures
maximum stability on all
surfaces while keeping
the electronic components
well protected in the RC
box! Long suspension arms
with aluminium oil shocks
make for smooth driving
over even the bumpiest
terrain. Regardless of
the terrain you drive on,
the giant tyres
guarantee perfect
traction and grip on all
surfaces. The independent
wheel suspension has been
perfectly tuned to offer
optimal performance even
in the toughest of
terrains.Product
Features:Heavy duty oil
shocksFour-wheel
steering55T crawler
motorAdjustable battery
position2.2 tyres with
beadlock
wheelsPre-painted
bodyDrive: 4WDLength: 430
mmWidth: 250 mmWheel
base: 320 mmClearance: 85
mm Requires (NOT
INCLUDED) 2 Channel RC
UnitElectronic speed
controller (ESC)7.2v Race
pack and chargerTools to
build kitManufacturer:
Ansmann RacingModel:
Crawler Kit
(122000014)Scale: 1:10
Availability: In Stock
£159.99
Available
-
The Ansmann Racing 1:10
Royal Flash always
guarantees the best
traction and the extra
long shocks allow for
jumps with greater height
and distance. No matter
how high the jump, the
landings are always
smooth so you can
continue immediately with
full throttle ahead.The
high brushless motor
accelerates your Royal
Flash so powerfully that
the only evidence its
passed through is the
cloud of dust it leaves
behind. If you want to
have the most innovative
electric off roader then
you've found it.The Royal
Flash RTR is fully
assembled and ready to
run. What's more, this
off roader is loaded with
awesome decals.Required
Equipment:LiPo Battery
PackBattery Charger8x AA
BatteriesManufacturer:
Ansmann RacingModel:
Royal Flash RTR
(124000016)Scale: 1:10
Availability: In Stock
£184.99
Available
-
Experience realistic
short course racing
action with the new Short
Course Truck from
AnsmannBased on the
popular Mad Rat, the 2WD
chassis has oil filled
shocks, four wheel
independent suspension
and a sealed gearbox with
adjustable slipper
clutch.Topped off with a
pre-finished Short Course
Truck body shell,
realistic looking frame
type bumpers and special
block tread tyres to
provide ample grip.
Features:Self assembly
2WD off-road Short Course
Race TruckFactory painted
multi-coloured body
shellAnsmann Clash 540
type motorOil filled
coil-over shocksTough
plastic
componentsAdjustable
turnbuckles & tie
rodsMoulded tub style
chassisSealed gear
box48dp transmission
gears with ball
differentialAdjustable
slipper clutchCVD rear
drive shafts12mm hex
wheel fitment front &
rearRacing wheelsHigh
block-spike tyresDetailed
assembly instruction
manualRequires: RC
system, ESC, battery &
charger to operate
Manufacturer: Ansmann
RacingModel: Shortcourse
Kit (122000018)Scale:
1:10
Availability: In Stock
£89.99
Available
-
The Ansmann Racing 1:10
Shortcourse adds to the
jumping characteristics
as the nose and tail
don‘t dip too deeply
for a steady flight path.
The gearbox is sealed to
protect it from dust and
stones. This model offers
demanding pilots a wide
range of adjustment
options to fine-tune the
vehicle for any track. On
cross-country runs or
spectacular jumps the X4
Pro is in its
element.Experience the
4WD off-road fascination
of this vehicle as you
thunder across the
terrain with the X4 Pro.
The chassis has threaded
oil shocks and four wheel
independent suspension
with triangular control
arms made of sturdy ABS
plastic material. The
heaviest weights such as
the motor and battery are
centred to deliver agile
and predictable handling.
Product
Features:Pre-assembled
RTR Vehicle2-channel 40
MHz wheel radio
controlHeavy duty oil
shocksHorizontal steering
servoCovered
driveAdjustable slipper
clutchCovered gearsRacing
ball
differentialRequires:
Battery & charger to
operateManufacturer:
Ansmann RacingModel:
Racing Shortcourse RTR
(124000013)Scale: 1:10
Availability: In Stock
£149.99
Available
-
The Ansmann Racing 1:10
Shortcourse X4 SC Pro
kit. The chassis has
threaded oil shocks and
four wheel independent
suspension with
triangular control arms
made of sturdy ABS
plastic material. The
heaviest weights such as
the motor and battery are
centred to deliver agile
and predictable handling.
This also adds to the
jumping characteristics
as the nose and tail
don‘t dip too deeply
for a steady flight path.
The gearbox is sealed to
protect it from dust and
stones. This model offers
demanding pilots a wide
range of adjustment
options to fine-tune the
vehicle for any track. On
cross country runs or
spectacular jumps the X4
SC Pro is in its
element.Product
Features:Heavy duty oil
shocksAdjustable slipper
clutchCovered gearsRacing
ball
differentialAdjustable
camber, track and shock
positionsClear bodyScale:
1:10Drive: 4WDMotor: Not
includedLength: 380
mmWidth: 320 mmWheel
base: 270 mmClearance: 33
mm Requires (NOT
INCLUDED):2 Channel RC
Unit540 motorElectronic
speed controller
(ESC)7.2v Race pack and
chargerPaint and tools to
build kit Manufacturer:
Ansmann RacingModel:
Shortcourse X4sc Pro
(122000019)Scale: 1:10
Availability: In Stock
£189.99
Available
-
The Ansmann Racing 1:10
Blizzard blows across any
type of terrain and
freezes the ground
beneath it. Whether
asphalt or off road, it
can handle any surface.
Fly with it on the street
and let its cold power
impress you and freeze
your opponent with its
icy storm. Get ready for
a nimble cruiser with
exceptional power.The
Blizzard blows across any
type of terrain and
freezes the ground
beneath it. Whether
asphalt or off road, it
can handle any surface.
Fly with it on the street
and let its cold power
impress you and freeze
your opponent with its
icy storm. Get ready for
a nimble cruiser with
exceptional power. 4WD
buggy featuring oil
filled dampers and Speed
Racer RS motor. Product
Specification:Oil filled
dampers Finished body
Speed Racer RS motorBall
bearings Rear CVD shafts
Pivot ball
suspensionLength 390mm
Width 240mm Wheel base
265mmRequired
Accessories:Racing
PackPowerjack EP
ProManufacturer: Ansmann
RacingModel: X-Pro
Blizzard
RTR(124000016)Scale: 1:10
Availability: In Stock
£179.99
Available
-
The Ansmann Racing 1:10
Blizzard blows across any
type of terrain and
freezes the ground
beneath it. Whether
asphalt or off road, it
can handle any surface.
Fly with it on the street
and let its cold power
impress you and freeze
your opponent with its
icy storm. Get ready for
a nimble cruiser with
exceptional
power.FeaturesOil filled
dampersFinished bodySpeed
Racer RS motorBall
bearingsRear CVD
shaftsPivot ball
suspensionLength
390mmWidth 240mmWheel
base 265mmRequired To
Complete2 Channel
RadioElectronic Speed
Controller7.2V Battery &
ChargerManufacturer:
Ansmann RacingModel: X4
Pro Blizzard Kit
(122000016)Scale: 1:10
Availability: In Stock
£119.99
Available
-
The Cyclone nitro car is
our entry level model for
the on road racer.
Perfect for the beginner
it features a simple
gearbox and easy layout
which will allow you to
be racing in no time.
Although more simple than
the PRO version the
Cyclone is still a
seriously fast nitro
racing car with an
excellent performance
profile. With its strong
alloy chassis, shaft
driven 4WD system and
sealed radio compartments
you will be amazed at the
speed, handling and
quality of such a low
priced model. The Cyclone
comes fully built with
radio control included.
Just add fuel and a glow
start and prepare to
enter the world of nitro
radio controlled
racing.SPECIFICATIONS:Width:
199MMHeight: 115MMTrack:
185MMLength:
380MMWheelbase: 259MMGear
ratio: 8.35:1Engine: New
Powerful Team Infinty
15Wheel dia.:
64*26MMGround clearance:
8.5MM FEATURES:1/10 Scale
nitro powered car4WD
Shaft drive
systemJapanese high
quality pull start
engineOil-filled
shocksSingle speed gear
boxFront and rear bevel
differentials75CC Fuel
tankMetal disc brake
systemPre-painted and cut
body shellSealed box for
protecting receiver
systemHigh quality 27MHZ
CE approved Radio system
with changeable crystals.
Availability: In Stock
£124.99
Available
-
Get ready to hit the
trails now with the new
SCX10 Ready-to-Run TR
(Trail Ready). The TR
features a true steel
C-channel ladder frame
with bolt on shock hoops,
molded skid plate, and
dual spring oil filled
shocks. These are just a
few of the items that
make this one capable
off-road truck. The Dingo
truck body is also
specifically designed for
the trail because it
incorporates a realistic
molded roll cage and
fender flares which are
molded in tough durable
composite plastics that
will withstand the abuse
of some of the toughest
trail runs.Also when the
sun sets, the outings
don't stop either because
a total of 6 LED's
brightly illuminate the
trail, so there's no
trail too treacherous for
the SCX10 TR.SCX10 TR
Features:Complete ready
to run out of the box 4WD
27T Electric Motor: Tear
up the terrain in-door or
out-doors. Easy
Operation: No Tuning, No
Fuel, No Loud Exhaust
Noise. Just Plug'n'go!
20T pinion paired with an
87T spur gear gives you
quick acceleration while
still allowing for a
smooth low end speed
range True Beadlocks: No
Messy Glue! Hi-quality
Composite Plastic and
Metals 6 LED's: 4 white
LED’s for the front and
2 red LED’s for the
rear Electronic Speed
Controller (ESC): forward
and reverse speed
controller. Hi-Torque
metal gear servo helps
hold your line when rock
crawling Solid Rear Axle
lockouts improve ground
clearance and offer a
more realistic appearance
Slipper Clutch: Reduces
gear wobble for a more
efficient drivetrain.
Allows a motor to work
more efficiently and
greatly enhances the
durability of the
drivetrain. Steel chassis
rails with a molded
composite plastic cross
members provide a solid
and rigid chassis Ultra
compact and lightweight
transmission Full Ball
bearings Overall gear
ratio range from 15:1 to
74:1 Transmission: 2.6:1;
center mounted Tyres:
Pro-Line 1.9 Flatirons
tires Wheels: Axial 1.9 8
Hole Beadlocks (Satin
Chrome) Suspension: 3
Link Drive Shafts:
Universal front and rear
Spec Check:Chassis
Dimensionsa. Wheelbase:
290mm (11.4”) b. Width:
227mm (9”) c. Height:
150mm (5.9”) d. Weight:
2086g (4.6 lbs) Ground
Clearance: 68mm (2.7”)
Body Dimensionsa. Length:
425mm (16.7”) b. Width
without fender flares:
180mm (7.0”) c. Width
with fender flares: 226mm
(8.9”) d. Height: 145mm
(5.7”) Required for
completion: Charger,
7.2v Stick Pack Battery,
8 xAA Size Batteries.
Manufacturer: Axial
RacingModel: SCX10 - TR
(Trail Ready) RTR 1/10th
Scale Electric 4WD Rock
Crawler AX90012
Availability: In Stock
£249.00
Available
-
Based upon the very
popular competition ready
AX10 Kit, the AX10
Scorpion is a
Ready-to-Run with 2
configurations! Rock
Crawler: Takin' it slow -
swap out the 20t pinion
to the 14pt pinion and
install the front locker
(parts included). The
Rear locker is already
installed. This will give
you true crawling
performance.Rock Racer:
Attack the rocks at full
speed out of the box.
FeaturesComplete ready to
race/crawl out of the
box27T Electric Motor:
Tear up the terrain
in-door or out-doors.
Easy Operation: No
Tuning, No Fuel, No
Loud Exhaust Noise. Just
Plug'n'go! 20T pinion
paired with an 87T spur
gear gives you a quick
rock racer ratio, or
install the included 14T
pinion for a slower rock
crawling ratio. True
Beadlocks: No Messy Glue!
Hi-quality Composite
Plastic and Metals
Durable (ESC) Electronic
Speed Controller:
Hi-quality durable
forward and reverse speed
controller. Hi-Torque
Servo help hold your line
when rock crawling Solid
Rear Axle lockouts
improve ground clearance
when crawling Slipper
Clutch: Reduces gear
wobble for a more
efficient drivetrain.
Allows a motor to work
more efficiently and
greatly enhances the
durability of the
drivetrain. Aluminum
Chassis plates with a
molded nylon skid plate
provide a solid and rigid
chassis Ultra compact and
lightweight transmission
Open front diff for
smaller turning radius,
or install the included
front locker for more
traction when rock
climbing! Rear axle is
locked for better
traction. Full Ball
bearings Overall gear
ratio range from 15:1 to
74:1 Transmission: 2.6:1;
center mounted •
Differentials: Front -
gear differential; Rear -
locked (spool)
Transmission:
Single-speed Tires: Axial
2.2 Rock Lizards Wheels:
Axial 2.2 8 Hole
Beadlocks (Satin Chrome)
Suspension: 3 Link Drive
Shafts: Universal front
and rear Required for
completion: Charger,
7.2v Stick Pack Battery,
8 xAA Size Batteries.
Manufacturer: Axial
RacingModel: AX10
Scorpion RTR Rock
Racer/Rock Crawler
AX90002
Availability: In Stock
£219.99
Denmark