United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Woodworking
Archived Product
-
The complete workstation
to accommodate a variety
of woodworking machines
such as mitre saws;
fretsaws; bandsaws;
sanders and the like.
230v or 110v power
sockets with three
extension lead sockets
each with 2m of cable. a
machine can be held by
means of t.
Specification:
height
adjustment ... 650-790mm
clamping depth
(vice) ... 345mm
(max.)
max. length (with
extension) ... 2920mm
overall length. Weight:
0.00kg.
Availability: In Stock
£148.10
Archived Product
-
Huge capacity and
easy-to-read calibration
scales allow one person
to effortlessly cut large
sheets. Table can be
locked in position for
conventional ripping of
wide workpieces. table
can also slide for use as
a panel saw. The patented
rip fence design allows
fence settings at all
angles. incorporates work
hold-down clamps.
Free-standing outer track
allows operator to walk
behind the sliding table,
in full control.
Dismantles in seconds and
takes up very little
space, hanging on a wall
or standing in a corner.
Handle sheets up to
2400mm x 2400mm. 1200mm
capacity. built-in fence
clamps hold awkward
workpieces securely to
the table and fence.
suits triton series 2000
and mk3 workcentres.
Availability: In Stock
£215.00
Archived Product
-
Conventional jigs on the
market require that you
align the tool in the jig
with two mounting screws
which is time consuming
and you lose the exact
repeatability when
re-sharpening. The new
tormek square edge jig
solves this problem and
the chisel will be lined
up square, i.e. at 90
degrees, each time
without any adjustments.
this is achieved because
the jig automatically
aligns the chisel to its
flat, machined face.
Another benefit is that
the se-76 can also clamp
short and tapered tools
firmly, e.g. japanese
chisels. the jig copes
with blades up to 76 mm
or 3" width. the new
square edge jig se-76 has
safety stops, which
prevent the tool from
slipping off the stone,
which can hurt your
fingers. improved housing
stiffness from greater
reinforcement and
material thickness,
gives you easier and
accurate grinding. The
t-3 model includes the
se-76 square edge jig,
wm-200 anglemaster,
pa-70 honingcompound,
hb-10 handbook and dvd-1
tormek instructional dvd.
image 2:
stainless steel
hardware prevents
from rust and wear on
bearings. image 3:
universal support with
acme thread. round
section without flat
machining makes it faster
to change position.
image 4:
improved horizontal
base: double locking
screws and tighter fit
for highest precision.
image 5: micro
adjust with scale.
for a predetermined
cutting depth when using
the tt-50 truing and
dressing tool.
Availability: In Stock
£241.95
Archived Product
-
Key features:
stainless steel shaft
7 year guarantee
supplied complete
with
Availability: In Stock
£419.95
Archived Product
-
Package deal comprises
the tormek t-7 water
cooled sharpening system,
tormek htk-705 hand tool
kit and the sjobergs
smaland workbench.
tormek t-7 water
cooled sharpening
system
200w motor. heavy duty
steel construction.
water-cooled sharpening
wheel. leather honing
wheel. comprehensive
range of accessories.
tormek htk-705 hand
tool kit
kit contains: svm-45
short knife jig. svm-140
long thin knife jig.
svx-150 scissor jig.
svs-32 short tool jig.
sva-170 axe grinding
kit. all contained in a
quality storage box.
sjobergs smaland
workbench
built to last. made
from high quality
scandinavian timber,
with thick mdf tops.
minimal self assembly.
hard wearing, easily
cleaned laminate top.
supplied with vice &
bench dogs. l 1000 x w
500 x h
820mm.
Availability: In Stock
£519.95
Archived Product
-
Package deal comprises
the tormek t-7 water
cooled sharpening system,
tormek htk-705 hand tool
kit and the sjobergs
smaland workbench.
tormek t-7 water
cooled sharpening
system
200w motor heavy duty
steel construction.
water-cooled sharpening
wheel. leather honing
wheel. comprehensive
range of accessories.
tormek tnt-708
woodturner's accessory
kit
kit contains: svd-185
universal gouge jig.
svs-50 multi jig.
svd-110 torlock
toolrest. tts-100
turning tool setter.
la-120 honing wheel.
mh-380 protective
cover. tnt-300 dvd and
tuition manual.
sjobergs smaland
workbench
built to last. made from
high quality scandinavian
timber, with thick mdf
tops. minimal self
assembly. hard wearing,
easily cleaned laminate
top. supplied with vice
& bench dogs. l 1000 x
w 500 x h
820mm.
Availability: In Stock
£599.95
Archived Product
-
The new t-7 model
improves the accuracy and
safety in edge tool
sharpening thanks to two
new innovations, a
square edge jig and a
truing and dressing tool
with screw feed. these
developments also make
the sharpening more user
friendly. Conventional
jigs on the market
require that you align
the tool in the jig with
mounting screws which is
time consuming and you
lose the exact
repeatability at each
sharpening. the new
tormek square edge jig
solves this problem and
the chisel will be ground
square, i.e. at 90
degrees, each time
without any adjustments.
this is achieved because
the jig automatically
aligns the chisel to its
flat, machined face.
Another benefit is that
the se-76 can also clamp
short and tapered tools
firmly, e.g. japanese
chisels. the jig copes
with blades up to 76 mm
or 3" width. The new
square edge jig se-76 has
safety stops, which
prevent the tool from
slipping off the stone,
which can hurt your
fingers. The other
development is a truing
and dressing tool tt-50
with screw feed. this
enables the user to keep
the stone in perfect
condition, which is
essential for a perfectly
sharpened edge. A seven
year warranty applies to
all customers including
industrial users. this is
possible due to the
improved coating of the
housing, stainless steel
main shaft and a
powerful, industrial ac
motor, which is designed
for continuous operation.
included with the
tormek t-7: se-76
square edge jig. tt-50
truing & dressing tool.
sp-650 stone grader.
wm-200 anglemaster.
pa-70 honing compound.
hb-10 handbook. dvd-1
tormek dvd. Image 2:
truing and dressing tool
with screw feed.
image 3: stainless steel
hardware.
image 4: universal
support with acme thread.
image 5: improved
horizontal base.
image 6: micro adjust
with scale.
.
Availability: In Stock
£429.95
Archived Product
-
Tormek t-7 water cooled
sharpening system:
200w motor
heavy duty steel
construction
water-cooled
Availability: In Stock
£445.95
Archived Product
-
The tormek t-7 sharpening
system raises the
standards of such
sharpening systems
further and offers a
premium sharpening
solution. The t-7 also
offers a 200w motor,
heavy duty steel
construction,
water-cooled sharpening
wheel and leather honing
wheel but the kit of
accessories has been
extended to contain the
new tt-50 truing and
dressing tool, the
sp-650 stone grader and
the new se-76 square edge
jig which has an
increased capacity of
76mm(3") and has safety
stops to prevent chisels
running off the side of
the stone. the
comprehensive range of
specialist grinding jigs
makes this the first
choice for amateurs and
professionals alike.
tools can be sharpened
either with the
supergrind wheel cutting
towards the edge, or by
using the xb100 support
base, grinding away from
the edge (preferable in
some cases, especially
with carving tools). The
main tool support bar is
fitted with a
micro-adjuster which
makes setting up or
replicating a sharpening
angle both easy and
highly accurate. the t7
package includes; tt-50
truing and dressing tool,
sp-650 stone grader,
se-76. tormek htk-705
hand tool kit:
this kit of jigs is
perfect for those using
most of the main hand
tools. kit is packed in a
quality storage box for
bench or wall mounting
and contains the
following tormek machine
accessories: svm-45 short
knife jig
svm-140 long thin knife
jig
svx-150 scissor jig
svs-32 short tool jig
sva-170 axe grinding
kit
. tormek tnt-708
woodturner's accessory
kit:
a comprehensive kit of
jigs for those using wood
turning tools - this kit
offers tormek accessories
at great value for money.
kit contains the
following tormek machine
accessories:
svd-185 universal gouge
jig
svs-50 multi jig
svd-110 torlock toolrest
tts-100 turning tool
setter
la-120 honing wheel
mh-380 protective cover
tnt-300 dvd and tuition
manual
model: t-7
nett weight: 14.2kg
overall l x w x h: 270 x
250 x 325mm
power: 200w
wheel diameter: 250mm
wheel width: 50mm
.
Availability: In Stock
£739.95
Archived Product
-
The t3 model is ideal for
sharpening cabinet making
hand tools, knives,
scissors and wood carving
tools. you will be
certain to grind your
plane irons and chisels
with a perfectly square
edge using the latest
design jig which is
included with the t3. it
also comes with the
unique tormek handbook,
where you can learn
everything you need to
know to shape, sharpen
and hone your tools to
perfection. the t3 is
built in sweden to the
same quality and
precision as all tormek
products in the range
which ensures accuracy
and ease of use. the
heart of the system is a
powerful industrial ac
motor, which will
maintain all the drive
you need from start to
finish on the 200mm(8")
diameter stone. The
stainless steel shaft and
hardware eliminate any
risk of corrosion and
there is a seven year
warranty. supplied
complete with se-76
square edge jig, angle
master, honing compound,
handbook and dvd. the
handtool kit of jigs
is perfect for those
using most of the main
hand tools. kit is packed
in a quality storage box
for bench or wall
mounting and contains the
following tormek machine
accessories:-
svm-45 short knife jig
svm-140 long thin knife
jig
svx-150 scissor jig
svs-32 short tool jig
sva-170 axe grinding
kit
. the woodturners kit
of jigs is for those
using wood turning tools
- this kit offers tormek
accessories at great
value for money. kit
contains the following
tormek machine
accessories:-
svd-185 universal gouge
jig
svs-50 multi jig
svd-110 torlock
toolrest
tts-100 turning tool
setter
la-120 honing wheel
mh-380 protective cover
tnt-300 dvd and tuition
manual
model: t-3
nett weight: 7.4kg
overall l x w x h: 230
x 200 x 260mm
power: 120w
wheel diameter: 200mm
(8")
wheel width: 40mm
(1.5/8")
.
Availability: In Stock
£509.95
Archived Product
-
The tormek blackstone
silicon sb-250 is
designed for hard
materials and fast
sharpening. it offers
fast steel removal on hss
and exotic alloys and can
touch up tungsten
carbide. the key to
removing material
efficiently at low rpm is
very sharp grains with
high hardness and
relatively fine grit
size. the sb-250 is made
in the same grit size as
the original tormek
grindstone and can be
graded with the stone
grader for fast material
removal or fine surface
finish. Model: sb-250
bore: 12mm
diameter: 250mm (10")
grit: 220g
width: 50mm (2")
..
Availability: In Stock
£169.95
Archived Product
-
It is extremely hard to
correctly sharpen a drill
bit by hand. this drill
bit sharpener from tormek
makes it possible to
sharpen drill bits on
your tormek water cooled
sharpening system with
the highest precision.
unlike conventional drill
bit sharpeners, tormek
sharpens with water
cooling which is gentle
on the steel. overheating
of the steel is usually
not noticeable, but the
consequences are that the
drill will dull rapidly
and may even break. The
attachment can be set at
any point angle between
90 deg and 150 deg and at
four different clearance
angles. this flexibility
enables you to give the
drill the geometry that
works best for each
drilling operation.
Availability: In Stock
£219.95
Archived Product
-
The fastest-adjusting
frame clamp on the
market. Completely
knurled for good grip,
the speed-clamping nuts
are designed to let you
make fast adjustments,
yet hold securely when
you tighten them. They
are cross drilled to
slide easily on the rods
until they come up
against a corner clamp;
then their threads
engage. To release them,
you just have to back
them off a turn or two
and they are then free
sliding again. The speed
clamp includes four
corners (strong,
glass-filled nylon with
brass inserts), four
speed-clamping nuts and
four 1/4-20 threaded rods
that will clamp up to 23"
square. To increase
clamping capacity to 44"
square or 65" by 23"
rectangle, an extension
set is available; it
includes four 1/4-20
threaded rods and four
coupling nuts. The rods
and coupling nuts have a
black-oxide finish.
Speed-clamping nuts are
also available separately
to upgrade an older model
or to use as jig and
fixture parts..
Availability: In Stock
£26.39
Archived Product
-
Enables accurate bevels
and chamfers from 15°
through 90°. Makes use
of the workcentre
protractor for control of
short bevels and perfect
compound mitres. Fully
adjustable, enabling you
to bevel rip or chamfer
long and wide pieces.
compatibility. Suits
series 2000 workcentre.
Adaptor kit available to
suit mk3 workcentre.
bevel ripping guide model
bra100 required for
triton powered saw table
and compact saw table.
Availability: In Stock
£76.99
Archived Product
-
150mm 370w 230v heavy
duty bench grinder a
heavy duty model designed
for use in the garage or
industrial workshop. One
coarse and one fine
grinding wheel,
adjustable eye protection
shields, spark
deflectors, wheel guards
and tools rests. Fitted
with a bs approved
non-rewireable 3 pin
moulded plug and cable.
Display carton.
specification:.
150mm. 12.7mm. 2850rpm.
360 x 220 x 245mm.
11/12kg.
Availability: In Stock
£51.05
Archived Product
-
This 6" bench grinder
features a 370w induction
motor to ensure smooth
running. Adjustable tool
rests compliment two
kinds of grind stone, a
coarse grey wheel and a
40mm wide whitestone with
a fine grit. Motor power:
370w. Speed (min-1):
2800rpm. White stone: 80
grit. Grey stone: 36
grit. Wheel dimensions
grey: 150mm x20mm
x12.7mm. Wheel dimensions
white: 150mm x 40mm x
12.7mm. Noise emissions
(no load): < 85db (a).
Weight: 6kg (13.2lbs)
370w induction motor..
Availability: In Stock
£49.95
Archived Product
-
Fifty mm discs and
brushes with electronic
speed control from 8 to
24 m/sec. The slim
housing facilitates the
grinding of long
workpieces and includes
an adapter to connect a
vacuum cleaner to the
unit. The tool rests and
eye guards are both
adjustable. A spindle
lock eases the changing
of wheels and discs.
supplied with a
50 x 13mm corundum (grade
n) and silicon carbide
(soft compound) for
general
grinding/sharpening and
hard materials
respectively. The right
hand spindle accepts
the polishing arbor,
which is supplied as
standard equipment..
Variable speed of 3, 000
- 9, 000 rpm with
standard wheels. Motor
220/240v. Weight approx.
1.2kg. Size 250 x 130 x
100mm.
Availability: In Stock
£70.00
Archived Product
-
Ideal for the hobbyist
allowing you to frame
pictures at home. Inserts
v-nails into the base of
wood making a tight firm
join. Secures the picture
backing board & will put
your screw eyes in.
Simple & easy to use &
ready to hang in minutes!
loads of accessories to
get you started.
includes:
pushmaster tool
400v-nails in assorted
sizes instructions
starter pack backing
nails flexipoints screw
eyes.
Availability: In Stock
£47.95
Archived Product
-
New british designed foot
operated underpinner.
fantastic value for the
occasional diy or artist
framer, offering the
ease of use of an
underpinner but without
the high price tag.
Wedges (v-nails) are
loaded individually into
the cartridge and then
the footpedal is used to
insert them into the back
of the frame. production
stops give repeatability
when joining all 4
corners of the frame.
unlike normal diy framing
tools the m1 allows you
to see the face of the
joint before inserting
the wedges so you can
achieve a higher quality
of finish in a much more
efficient manner.
specifications:
maximum moulding
width: 100mm. maximum
moulding height: 80mm.
minimum moulding width:
10mm. minimum moulding
height: 10mm. wedge
sizes: 7mm to 15mm.
dimensions (wxdxh):
680mm x 600mm x 1090mm.
weight: 15kg.
rating: diy.
warranty: 1 year.
Availability: In Stock
£152.95
Archived Product
-
Triton's unique biscuit
joiner (bja300) quickly
fits to the triton router
table for fast, strong
and invisible joints.
Ideal for bevel, mitre,
rail-to-stile,
edge-to-edge,
end-to-end,
rail-to-post,
edge-to-face, right
angle joints and other
forms of edge joinery.
Includes tct cutter and
pack of biscuits. Biscuit
joiner model bja300 suits
router table model
rta300. Biscuit joiner
model bja001 suits all
earlier triton router /
jigsaw tables
manufactured since 1987
(with red plastic slide
catches). Requires the
use of a ½” or ¼”
router.
Availability: In Stock
£99.99
Archived Product
-
Frame clamp designed for
assembling picture frames
or other articles of
various sizes and
configurations prior to
gluing or fixing. Tension
is maintained by means of
a strap linked to the
tensioning unit and
corner pieces. The corner
pieces are suitable for
clamping angles of 90°,
120° and 135°. Strap
length 4m (approx).
Supplied complete with
bench cramp for secure
bench mounting. Display
packed..
Availability: In Stock
£15.29
Archived Product
-
A very substantial and
well built machine.
Competitively priced with
a powerful 1/2" hp motor.
Large 465 x 465mm cast
iron work table. Supplied
with 3 drums (2"-11/2" -
3/4") and 6 table
inserts. 2 year warranty.
Maximum bobbin height:
110mm. Table tilt 0 to 45
degrees.. Motor power:
0.5hp (370w) 240v. speed
rpm: 178. height of work
table: 465mm. max height
of bobbins: 140mm.
Oscillating stroke mm:
24. oscilations per
minute: 24. table tilt:
from 0º to 45º. Weight
30kgs approx.
Availability: In Stock
£245.00
Archived Product
-
150mm 250w 230v bench
grinder a compact machine
with one coarse and one
fine grinding wheel,
adjustable eye protection
shields, spark
deflectors, wheel guards
and tool rests. Fitted
with a bs approved
non-rewireable 3 pin
moulded plug and cable.
Display carton.
specification:.
150mm. 12.7mm. 2950rpm.
330 x 200 x 250mm. 8/9kg.
Availability: In Stock
£34.69
Archived Product
-
A sturdy storage system
for timber, pipes and
other long items. Suits
internal or external
mounting applications.
Six levels, each with a
generous storage capacity
of 50kg (110lb) per
level. Easy installation
in workshops, garages,
sheds, fences, walls,
etc..
Availability: In Stock
£45.95
Archived Product
-
Cast iron construction.
re-sharpenable knives.
will cut any angle 0 to
45. lock in stops at 0
and 45. optional cutting
length attachment
(shown). The next step up
from a hand mitre saw,
this cast iron trimmer is
used after the rough
mitre to create a perfect
45 angle with the smooth
finish essential for a
good joint. The fences
have stops at 0 and 45
and can also be locked
down at any other angle.
the optional cutting
length attachment
provides an accurate
measuring system upto
29". Supplied with
regrindable knives.
specifications:
maxumum cutting height:
100mm. maximum cutting
width: 150mm. dimensions
wxdxh: 570mm x 230mm x
470mm. dimensions wxdxh
(with optional cla):
820mm x 620mm x 470mm.
weight: 12kg. rating:
trade.
Availability: In Stock
£215.00
Archived Product
-
If you requie an accurate
length of workpiece when
trimming at 45 degrees,
particularly when making
a picture frame, this
attachment is essential.
The measuring scale runs
right across the two beds
and allows for picture
frame moulding rebates to
be accounted for. Image
shown of mitre trimmer
with the length
attachment. for reference
only.
Availability: In Stock
£46.95
Archived Product
-
350w 230v wet & dry bench
grinder designed for the
workshop to hone and
grind hand and garden
tools. With a whetstone
honing wheel, dry white
grinding wheel, eye
protection shield, spark
deflectors, wheel guards
and adjustable tool
rests. Uses white dry
grinding wheel especially
suitable for high speed
steel tooling. Fitted
with a bs approved
non-rewireable 3 pin
moulded plug and cable.
Display carton.
specification:.
200mm. 80mm... . 125mm.
12.7mm. 320rpm. 2850rpm.
460 x 320 x 300mm.
10/11kg.
Availability: In Stock
£132.79
Archived Product
-
The creusen hp7150t 150mm
grinders are available in
either 240v or 110v for
workshop or site use.
Supplied with 350w, 2,
850rpm motor and two 20mm
wide standard grey
aluminium oxide
grindstones, 36 grit and
80 grit. (bore size
15mm). specifications:
bore: 31.75mm. diameter:
150mm. grit: 60. nett
weight: 9kg. power: 350w.
speed: 2850rpm. wheel
diameter: 150mm. wheel
width: 20mm. Key
features: 3, 50w, 2,
850rpm motor. 36 grit and
80 grit grey aluminium
oxide grindstones.
Availability: In Stock
£184.95
Archived Product
-
The draper 370w bobbin
sander comes with the
following features.
features:
features:
Availability: In Stock
£234.95
Archived Product
-
The ultimate woodworking
machine.the series 2000
workcentre allows you to
fit your own powersaw to
get accurate results
every time. Designed by
woodworkers for
woodworking, the triton
workcentre 2000 is the
cornerstone of the triton
workshop system. With a
triton workcentre, the
joys of woodwork are at
your fingertips! strong,
fully portable and space
efficient, the
workcentre has
professional capabilities
and accuracy and is tough
enough for daily use. the
triton workcentre
converts between a
tablesaw and a crosscut
saw in around 40 seconds
for many varied cuts.
with the use of optional
accessories it can also
be used as a: overhead
router router shaper
table jigsaw table finger
jointer biscuit joiner
edge planer face plate
sander panel saw
information on related
workcentre accessories
can be accessed via the
links in the top right of
your screen. You'll make
strong and neat joints
quickly and easily the
triton series 2000
workcentre will accept
most portable circular
saws (184 / 7 1/4" mm to
235mm / 9 1/4") and most
routers, jigsaws and
planers with the use of
an optional accessory.
Availability: In Stock
£275.95
Archived Product
-
This machine has all the
same features as the
smaller 6” model but
with the obvious benefits
of a larger capacity
grinder. The motor has
been upgraded accordingly
to a high power 500w
induction unit. Motor
power: 500w. Speed
(min-1): 2800rpm. White
stone: 80 grit. Grey
stone: 36 grit. Wheel
dimensions grey: 200mm x
25mm x 16mm. Wheel
dimensions white: 200mm x
40mm x 16mm. Noise
emissions (no load): <
85db (a).weight: 10kg
(22lbs). 500w induction
motor..
Availability: In Stock
£64.95
Archived Product
-
The triton 2000w 1/2"
router is the perfect
companion for any router
table. Fast,
trouble-free cutter
changing from beyond the
base and above the table,
with just one spanner.
No more skinned knuckles!
3 modes of depth setting
to suit every job. Rack &
pinion winder handle for
single-handed, accurate
and fast depth
adjustment. Fine tune
depth adjustment
throughout the full
plunge range using the
micro winder.
Conventional "free"
plunge for fast, coarse
depth adjustment. Quick
and accurate cutter
adjustments are made easy
using the
“through-base” collet
access and unique depth
controls. Powered by a
2000 watt motor with soft
start and variable speed
features, the triton
1/2” precision router
glides effortlessly and
cleanly through the
toughest jobs. Variable
speed (8, 000 to 20, 000
rpm) with speed
maintenance under load.
Removable plunge spring
reduces plunge resistance
when table-mounted. Fully
enclosed safety shields
(remain fitted when
changing bits).
Multi-function fence.
Incorporates extended
baseplate and circle
cutting features. Large
bore dust port for
effective chip extraction
13. 1/2" collet (with
1/4" reducer)..
Availability: In Stock
£265.95
Archived Product
-
Fitting a triton router
table to the triton
workcentre or router
stand adds a whole new
dimension to your
woodwork. Fit your router
to shape, plane,
rebate, trench, mould
and groove. Whatever the
job the triton router
table offers remarkable
accuracy, exceptional
versatility and enhanced
safety. With other
accessories you can even
perform jigsawing,
biscuit joining and
finger jointing. Accepts
most ¼” and ½”
routers. Large, rigid
work surface. Sliding
table insert with
removable protractor.
Fully tuneable fence.
Micro fence adjusters for
rebating and planning.
Planing shims for 0.5,
1.0, 1.5 & 2.5mm planing
cuts. Safety guard with
dust extraction port.
Sliding insert for
trenching and end grain
work. Protractor with
90° range. Adjustable
side pressure fingers.
Adjustable downward
pressure fingers. Small
and large cutter inserts.
Easy reference scales in
metric and imperial
measurements. Cuts:
planing, trenching,
rebating, moulding,
endgrain work, free-hand
work..
Availability: In Stock
£137.95
Archived Product
-
The complete workstation
to accommodate a variety
of woodworking machines
such as mitre saws;
fretsaws; bandsaws;
sanders and the like.
230v or 110v power
sockets with three
extension lead sockets
each with 2m of cable. a
machine can be held by
means of t.
Specification:
height
adjustment ... 650-790mm
clamping depth
(vice) ... 345mm
(max.)
max. length (with
extension) ... 2920mm
overall
length.
Availability: In Stock
£148.10
Archived Product
-
This superjaws is brand
new but is shop soiled.
the ultimate portable
workstation superjaws is
the workstation you take
right to the job -
indoors, outdoors,
construction sites or the
factory floor. Set up or
fold down in 20 seconds.
up to 1000kg clamping
pressure. instant jaws
adjustments from 0 to
900mm. tripod base for
great all-terrain
stability. for operated
clamping. protective,
slip-resistant urethane
jaw facings. You can
clamp anything from thin
sheet metal - to a door
lying flat.
Availability: In Stock
£81.95
Archived Product
-
Triton mof0011400w 1/2"
plunge router makes bit
changes easy and fast!
for a winder handle
plunge adjustment that
provides fast depth
adjustment the 1400w ½
plunge router is the
product to choose. Micro
winder enables continuous
fine depth adjustment.
Micro winder enables
continuous fine depth
adjustment through full
plunge range. Push button
plunge conversion
activates conventional
plunge mode. Compact size
– perfect for hand held
use and table mounting.
Easy set, direct reading
3 stage turret for
precise preset cut
depths. Safety switch
shutter locks closed in
bit change mode to
prevent power on. Soft
start and variable speed
(with maintenance under
load) provides the
perfect speed for all
cutter types. Removable
plunge spring for easy
bit adjustment when table
mounted. Fully enclosed
guarding provides maximum
protection form the cut
zone. Dust port connects
to any 38mm (1 ½”)
o.d. Vacuum hose. Multi
function fence: extended
base for greater
stability. Full fence
adjustment for trenching
etc. Built in circle
cutter..
Availability: In Stock
£193.95
Archived Product
-
Protect your health and
keep your workshop clean
with the triton
workcentre dust bag
(dca250). combined with a
vacuum connection to the
overhead guard it
collects almost 100% of
the dust created in the
tablesaw mode. Suits mk3
and series 2000
workcentres. dust bag
model dca100 required for
triton compacts and
powered saw tables.
Availability: In Stock
£61.45
Archived Product
-
A great value hand
operated flexible tab gun
used to insert the flat
tabs which neatly secure
glass, artwork and
backing board into a
frame. The tabs are
bendable after they have
been inserted so that the
contents of the frame can
be easily changed or
taken out for cleaning.
Works with any backing
material. Magazine feed.
Light weight - yet
strong. Ideal for window
glazing..
Availability: In Stock
£27.55
Archived Product
-
Triton rsb300 router
stand suits model rta300
triton router table a
separate stand for
fitting the triton router
table. Leaves the
workcentre set up with
the saw for greater
convenience fitted with
safety on/off switch.
Adjustable leg height for
uneven ground onboard leg
storage for portability..
Availability: In Stock
£122.95
Archived Product
-
Adjustable bench grinder
stand sturdy bench
grinder stand with floor
mounting holes and
adjustable height from
700 to 900mm. The grinder
fixing platform measures
228 x 198mm and will
accept draper grinder
models g150c, ghd150,
ghd155sb, ghd200,
ghd151l and ghd201l and
other manufacturers
similar machines.
Supplied flat packed for
self assembly, complete
with two hexagon keys.
Display carton..
Availability: In Stock
£97.09
Archived Product
-
The ultimate cutting
tool! whether you work
with steel as a trade,
or you enjoy the benefits
of steel for your diy
projects, the triton
steel cutter makes steel
cutting easy and
incredibly safe - in fact
triton believe that it's
the world¹s safest power
tool. The triton steel
cutter applies tungsten
carbide tip (tct)
technology to slice
through mild steel
sections up to 50.8mm
(2") square. The results
are extremely clean and
virtually burr-free 90
and 45 degree cuts. It¹s
much faster, cleaner,
more accurate and cheaper
to run than an abrasive
cutter - you'll never
look back. Tct blade cuts
much faster than an
abrasive disc. Once
adjusted to suit your
material the work clamps
operate automaticallyfor
fast repetitive cutting.
This, combined with a
length gauge
andadjustable flip-stop,
ensure multiple cutting
is completed in no time
atall. Virtually
burr-free & polished
finish. Cold too! the
speed and quality ofcut
from a steel cutter,
compared to that of an
abrasive disc, is
likecomparing a circular
saw cut to that of a
chainsaw. The tct blade
slicesthrough steel with
minimal effort, rather
than wearing it¹s way
through, resulting in a
much faster and cleaner
cut..
Availability: In Stock
£225.00
Archived Product
-
Dual bench grinder/honing
with the following
features. Vibration free
high torque induction
motor, grinding wheel
clamp, honing wheel with
machining support.
power input: 415watts
no load speed: 2750rpm
wheel diameter: 125mm
wheel width: 25mm
wheel bore: 20mm
voltage: 240volts
supplied with: grinding
wheel, honing wheel,
clamping and grinding
attachments, spark
guards and
spanner.
Availability: In Stock
£223.39
Archived Product
-
A multi-purpose support
stand with an advanced
method of material
handling and support.
With a clamp built into
the tilting and
swivelling head, it does
much more - at home or on
site. In the second image
the triton multi stand is
being used as an outboard
support. In the third it
is assisting in hanging a
door..
Availability: In Stock
£33.69
Archived Product
-
The triton dust collector
prevents sawdust filling
up or clogging your
vacuum cleaner. It
provides a huge 20 litre
capacity and can also be
used with just about any
product with dust
extraction outlets.
Suitable for all products
with dust extraction
output.
Availability: In Stock
£50.95
Archived Product
-
The triton ta235csl
circular saw replaces the
renowned tsa001. as well
as maintaining all the
key features of the
tsa001 that earned the
respect of so many
woodworkers, the
ta235csl is host to many
new features including
magnesium guards and base
and laser sighting.
Although a powerful tool
for use hand held, the
ta235csl is the perfect
companion to the
workcentre. features
range from its location
holes that allow easy and
rapid fitment to the
bevel and height micro
adjustments which enable
fine tuning for maximum
accuracy. a rack and
pinion height adjustment
system has also been
introduced for fast,
accurate adjustments when
mounted upside down in a
workcentre. Safety
features include the
power-on neon light
allowing the user to see
the saw is plugged in.
the lock-off button also
increases safety by
preventing accidental
start-up. The ta235csl
also features laser
sighting for increased
safety, faster set-up
and improved accuracy
when used hand held. the
flat motor end cap is a
convenient feature
allowing the saw to be
rested on the motor when
changing blades. this
circular saw also comes
equipped with a premium
quality 40 tooth tungsten
carbide tipped (tct)
blade for smooth and
accurate cuts, with the
sawdust being directed
out via the fitted dust
extraction port.
specifications:
input power: 2300w (15a)
no load speed: 4500rpm
insulation class: double
insulated blade size:
235mm (9 1/4") blade
arbor: 25mm (1") blade
teeth: 40 tct bevel
adjustment: 0° to 47°
positive bevel stops:
0°, 15°, 22.5°,
30° and 45° cutting
capacity at 90°: 82mm (3
3/16") cutting capacity
at 45°: 58mm (2 9/32")
net weight: 7.4kg (16.3
lbs).
Availability: In Stock
£171.95
Archived Product
-
Ideal gift for an artist.
Easy for anyone to use.
Adjustable mitre clamp.
Handpinner for inserting
vee nails. 265 piece
harware kit included.
Storage case included.
For the more frequent
frame maker the no.2 kit
offers a quicker and
easier method of joining
frames. After the two
pieces have been clamped
the handpinner is used to
insert the vee nail. The
levered action pushes the
wedge smoothly and at the
correct angle into
softwood or hardwood
frames. The driver can be
adjusted vertically so
that a flush finish is
always achieved and a
magnetic tip holds the
vee nail in place whilst
the clamp is positioned.
A suitable wood glue
should always be used in
conjunction with vee
nails. Maximum workpiece
size 75mm width x 100mm
height.
Availability: In Stock
£64.95
Archived Product
-
200mm 550w 230v bench
grinder with work light a
heavy duty machine with
work light, designed for
use in the garage or
industrial workshop. One
coarse and one fine
grinding wheel,
adjustable eye protection
shields, spark
deflectors, wheel guards
and tool rests. Supplied
with grinding wheel
dresser and storage tray.
Fitted with a bs approved
non-rewireable 3 pin
moulded plug and cable.
Display carton.
specification:.
200mm. 16mm. 2850rpm.
550w. 20kg.
Availability: In Stock
£102.15
Archived Product
-
Steel wire brush for
derusting and cleaning
steel and nf metals.
Brass wire brush to
polish non-ferrous metals
and precious metals. Felt
wheel is used on painted
surfaces and the chamois
and cotton wheels provide
a high gloss finish on
non-ferrous metals and
precious metals. Proxxon
polishing set (50mm) for
grinding & polishing sp/e
(28030).
Availability: In Stock
£18.95
Archived Product
-
Can be used for picture
framing. each corner that
the cord passes through
is tough, yet flexible
plastic. the larger
corner has a cleat to
lock it absoloutely tight
and is quick and easy to
use. Includes: 2.5m of
nylon cord for a good
size frame. 4 unique
flexible corners.
Availability: In Stock
£4.90
Archived Product
-
Easy-to-lock rip fence
with 0-450mm cutting
capacity on either side
of the cutting position.
see-through overhead
guard with anti-kickback
fingers and dust
extraction port.
protractor provides up to
450mm crosscut travel and
180° angle adjustment
for perfect mitre joints
and tapers. large (510 x
700mm) table for maximum
workpiece support.
integral push-stick and
side pressure finger for
safe ripping of narrow
pieces.
Availability: In Stock
£109.95
Archived Product
-
The right combination of
speed and capacity - to
handle almost every
grinding and sharpening
job. Powerful induction
motor - for smooth
running and reliability.
Fitted with tough hard
wearing grinding wheels
8in slow speed wet wheel
runs partly submerged -
to keep work cool when
grinding so as not to
damage their tempering.
Smaller 6in wheel ideal
for dry grinding - in
general workshop use
rugged on/off switch -
for heavy duty use.
Constructed with a robust
metal housing - for
maximum durability. Worm
gear drive mechanism -
for vibration free wet
wheel grinding.
Adjustable tool rests -
to compensate for wheel
wear. Supplied complete -
with tool rests, eye
shields, wheel guards
and spark arrestors for
operator protection and
safety. Ideal for garage,
workshop or diy use,
including fine sharpening
of chisels.
Availability: In Stock
£61.45
Archived Product
-
An aluminium frame clamp
ideal for holding frames
in position whilst the
glue sets. Frames can
also be side pinned when
clamped. Accomodates any
size of timber and is
self squaring simply by
tightening the central
wing nut. Minimum frame
size: 5" x 7". Maximum
frame size: 26" x 30".
Availability: In Stock
£27.55
Archived Product
-
The creusen hp7150t 150mm
grinders are available in
either 240v or 110v for
workshop or site use.
Supplied with 350w, 2,
850rpm motor and two 20mm
wide standard grey
aluminium oxide
grindstones, 36 grit and
80 grit. (bore size
15mm). specifications:
bore: 31.75mm. diameter:
150mm. grit: 60. nett
weight: 9kg. power: 350w.
speed: 2850rpm. wheel
diameter: 150mm. wheel
width: 20mm. Key
features: 3, 50w, 2,
850rpm motor. 36 grit
and 80 grit grey
aluminium oxide
grindstones.
Availability: In Stock
£159.95
Archived Product
-
For joining your frames
perfectly. The powerful
cam action combined with
the strength of the
pushmaster drives v nails
into the hardest of
timbers. Ideal for the
professional picture
framer, photographer,
artist or hobbyist.
Superior joining power in
most timbers. Precision
metal construction for
stability & reliability.
Portable, lightweight &
easy to use..
Availability: In Stock
£139.95
Archived Product
-
Powerful 1200w motor for
rapid stock removal with
variable speed control.
small diameter front
roller for sanding
confined areas and
detailed work. belt
tracking adjustment for
accurate alignment of
sanding belt. side dust
port connects to supplied
dust bag or vacuum
system. neon safety light
indicates when power is
available to the sander.
Specifications:
power 1200w.
no load speed 200 -
400m/min.
belt size: 533 x 76mm.
actual sanding area 145 x
85mm.
variable speed: yes.
includes dust bag and
sanding
belt.
Availability: In Stock
£199.95
Archived Product
-
Induction motor drive
suitable for general use.
fitted with stone guards,
adjustable eyeshields
and spark arrestors.
Fully ce approved
electrics for operator
safety. supplied with one
coarse stone and wire
brush for general
workshop grinding,
sharpening and descaling
work. Supplied with one
stone and one wire wheel
for cleaning and
descaling operations.
loaded with:
1 x stone, 1 x wire
brush motor: 370w.
input: 230v. axle
diameter: 13mm. no load
speed: 2850rpm. weight:
11kg. Motor: 450w.
input: 230v. axle
diameter: 13mm. no
load speed: 2850rpm.
weight: 12kg.
Availability: In Stock
£58.95
Archived Product
-
Get incredible control of
your jigsaw for accurate
curves and feature work.
Overhead blade
stabiliser. Adjustable
hold-down pressure for
steady operation.
Quick-mount clamps ensure
fast removal and
re-fitting of the jigsaw.
dust extraction for
continuous visibility of
the cut. only suits
triton router table.
Suits most jigsaws.
Availability: In Stock
£56.95
Archived Product
-
Bench grinder/linisher
with the following
features. Vibration free
high torque induction
motor, grinding wheel
clamp, leather honing
belt with support for
concave/convex shapes.
power input: 415watts
no load speed: 2750rpm
wheel diameter: 150mm
wheel width: 25mm
wheel bore: 20mm
belt size: 570 x 40 mm
voltage: 240volts
supplied with: standard
grinding wheel, 2
leather belts, clamping
and grinding attachments,
spark guards and
spanner.
Availability: In Stock
£242.05
Archived Product
-
For perfect bevel cuts
everytime. Benefits:
makes perfect bevel cuts
everytime. Includes bevel
mount cuter and guide
rule. A start/stop marker
eliminates overcuts.
Heavy duty anti-slip rule
for stable & accurate
cutting. Contains guide
rail, precision bevel
cutter & 5 blades.
includes: 66cm
guide rule 201 bevel
cutter 5 blades.
Availability: In Stock
£47.95
Archived Product
-
150mm 370w 230v bench
grinder with sanding belt
and work light a compact
machine with one 150mm
grinding wheel, 50 x
686mm sanding belt, work
light, dust extraction
for sanding facility,
adjustable eye protection
shield, spark deflector,
wheel guard and tools
rest. Supplied with one
fine and one coarse
grindingwheels, 80 grit
sanding belt, grinding
wheel dresser and storage
tray. Fitted with a bs
approved non-rewireable 3
pin moulded plug and
cable. Display carton.
specification:.
150mm. 12.7mm. 50 x 686mm
(2 x 27). 2850rpm.
285 x 190 x 190mm.
11.5kg.
Availability: In Stock
£73.55
Archived Product
-
Fits to the compact saw
tables for a for a
cleaner, healthier work
environment. Collects
almost 100% of the saw
dust created, when
vacuum cleaner is
attached dust collector
sold seperately. Dust
collector and vacuum
cleaner in image not
included. For reference
purposes only..
Availability: In Stock
£43.95
Archived Product
-
The triton workcentre can
deliver the required
accuracy, provided your
saw is up to the job. For
a truly rigid saw, we
suggest you fit the
triton saw stabilising
bracket, which
triangulates the support
of the saw motor. It
minimises saw deflection
when cutting under load,
and saw slump when the
saw is changed from the
table saw to the crosscut
mode or vice-versa. The
bracket is fully
adjustable for various
cutting depths and
angles. With most saws
you don't need to adjust
the bracket when changing
blade depth..
Availability: In Stock
£21.45
Archived Product
-
Take control of your
electric planer and get
professional results
every time. accurate
combines the clean finish
of an electric planer
with the rigid guidance
of a triton workcentre -
for perfectly smooth,
straight faces on all
your work. Clean dust
hose and detachable
collection bag included
for a clean environment.
safe protection from the
planer cutters is
provided by a
spring-loaded safety
guard. includes a
separate switch box with
safety shut-off for
independent operation of
your planer. Convenient
quickly folds for fast
changes between planer
and saw modes. when not
in use can be left folded
or quickly and easily
detached for storage. the
workcentre fence is used
to guide the work through
the planer to produce a
straight and true face.
Inaccuracy from the
planer shoe, following
the work, is eliminated.
remove a fraction of a
millimetre with each cut
- or up to 3mm each pass
if your planer is up to
the job. during the cut,
adjustable pressure
fingers hold your work
piece against the fence,
preventing the timber
from wandering and being
cut unevenly or out of
parallel. all you need to
do is push your material
through for a perfect
result every time. The
planer attachment kit
accepts fitting of most
82mm planers. suits
series 2000 workcentre
and mk3 workcentre.
Availability: In Stock
£122.95
Archived Product
-
Key features: great for
carvers, turners and
general woodworkers.
wide, fully adjustable
tool rests. 40mm white
aluminium oxide
grindstone 100g. 20mm
standard grindstone 80g.
high strength
polycarbonate guards.
vibration damping. This
is the most popular
creusen grinder and great
for carvers, turners and
general woodworkers
alike. On one side is a
generous 40mm wide
aluminium oxide stone and
on the other a 20mm
coarse grey aluminium
oxide stone for general
grinding. With wide,
fully adjustable grinding
rests, high strength
polycarbonate guards and
additional vibration
damping, this grinder
may not be the cheapest
on the market, but it is
indeed a pleasure to own
and use. Supplied with
350w 2, 850rpm motor,
one 40mm wide aluminium
oxide grindstone 100g and
one 19mm wide 80g
aluminium oxide
grindstone. (bore size
15mm).
Availability: In Stock
£169.95
Archived Product
-
Triton fja300 finger
jointer triton's finger
jointer fits straight to
the triton router table
for easy, accurate and
attractive box joints.
The simple way to make
perfect 1/4" and 1/2" box
joints in any board
thicknesses, from 3mm
(1/8") to 32mm (11/4").
Cut several joints at the
same time. Only suits
triton router table model
rta300..
Availability: In Stock
£81.95
Archived Product
-
The ezy framer can insert
all sizes of v-nails and
backing nails to hold the
artwork into the frame.
Includes 140 v-nails.
Will not insert
flexipoints but combine
it with the strap clamp
for better results. Can
be tapped with a mallet
for hardwood framing.
cannot be used with the
benchmaster.
Availability: In Stock
£18.95
Archived Product
-
Sealey bg200xl bench
grinder 200mm 560w/230v.
High power induction
motor suitable for
workshop use. fitted with
aluminous oxide grinding
wheels and suitable for
general sharpening and
grinding applications.
equipped with fully ce
approved safety guards
and wheel location
flanges to meet current
eu abrasive wheel
regulations. motor and
switchgear meet ce low
voltage directive and emc
directive. fitted with an
asta/bs approved safety
plug. Loaded with: 2 x
stone. motor: 560w.
input: 230v. axle
diameter: 16mm. no
load speed: 3200rpm.
weight: 17kg.
Availability: In Stock
£76.99
Archived Product
-
This new british designed
underpinner is very
simple to use thanks to
its advanced features.
the sliding fence allows
for multiple wedges (also
known as v nails) to be
inserted into the same
corner. there is a front
and back limit stop,
which can set to keep
wedge positions
accurately placed. When
using tall mouldings the
fence can be locked in
position to allow wedges
to be stacked two on top
of each other, therefore
two 10mm wedges become a
20mm wedge. there are two
foot pedals. the right
hand one operates the
moulding rebate clamp
which securely grips the
moulding from the front
before pinning. Another
great feature on this
machine is that when
adjusting the fence, to
insert a second wedge,
the rebate clamp also
travels with it, so that
the moulding always
remains tightly clamped.
The left hand pedal has a
dual action. firstly the
top clamp is lowered so
that the moulding is now
clamped in two
directions. secondly the
wedge is inserted
underneath the moulding.
to again increase the
simplicity of the m3
there is a green
indicator light which
illuminates when the
wedge has been fully
inserted and the
operation is finished.
Supplied with two
extension tables, l
shaped pressure pad,
round pressure pad,
pedal restrictor for
smaller mouldings and
wedge magazine height
adjusting tool.
specifications:
maximum moulding
width: 100mm. maximum
moulding height: 75mm.
minimum moulding width:
10mm. minimum moulding
height: 10mm. wedge
sizes: 7mm to 15mm.
dimensions (wxdxh):
730mm x 800mm x 1110mm.
weight: 30kg.
rating: light trade.
warranty: 1 year.
Availability: In Stock
£409.00
Archived Product
-
Heavy weight bench
grinders - feature
precision permanently
lubricated spindle
bearings for smooth
vibration free running.
tough hard wearing
grinding wheels. rugged
on/off switch - for heavy
duty use. robust metal
housing - for maximum
durability. powerful
induction motor - for
maximum performance,
reliability and long
life. designed to give a
long service life.
supplied with tool rests,
eye shields, wheel
guards and spark
arrestors. superb value
- excellent quality value
relationship. 1/2 hp
(375w) induction motor -
for heavy duty work.
suitable for garage,
workshop or diy use. a
quality heavyweight model
(13kg). A quality
heavyweight model (13kg).
Wheel diameter: 6"
(150mm). wheel width:
3/4” (20mm). 3000 rpm.
Availability: In Stock
£54.50
Archived Product
-
Draper 370w 150mm bench
grinder with light &
grinding wheel dressing
tool 240v a compact
machine with work light.
One coarse and one fine
grinding wheel,
adjustable eye protection
shields, spark
deflectors, wheel guards
and tools rests. Supplied
with grinding wheel
dresser and storage tray.
Fitted with a bs approved
non-rewireable 3 pin
moulded plug and cable.
Grinding wheel diameter.
.. 150mm. Bore size.. .
12.7mm. Speed.. .
2850rpm. Machine
dimensions.. . 285 x 190
x 190mm. Weight.. .
11.5kg.
Availability: In Stock
£66.39
Archived Product
-
The robert sorby
sandmaster allows sanding
and polishing of work
whilst still on the
lathe. Multi postion 2"
head and takes 3" head.
complete with 2 discs of
each 5 grits: 60, 120,
180, 240, 400. also
accepts goblet and bowl
mops to apply different
types of finishes.
Availability: In Stock
£37.75
Archived Product
-
The creusen bench grinder
features: slower running
speed (1, 425rpm)
demanded by woodturners,
2 x 40mm wide white
stones, 60g and 100g
and double locking,
fully adjustable tool
rests. The major
difference from other
grinders is the slower
speed (1, 425rpm), which
should prevent burning on
the delicate tips of
turning tools. it is
fitted with two 40mm wide
white stones as standard
(bore size 15mm, one
coarse 60g and one fine
100g) and uses double
locking, fully
adjustable tool rests.
This is not a cheap
grinder but a tool with a
real purpose. please
note, due to the nature
of the specially wound
motor, this unit does
take a short while to
come up to speed after
being switched on. not
suitable for use with
wire brushes.
Availability: In Stock
£239.95
Denmark