Conventional jigs on the market require that you align the tool in the jig with two mounting screws which is time consuming & you lose the exact repeatability when re-sharpening. The new tormek square edge jig solves this problem & the chisel will be lined up square, i.e. at 90 degrees, each time without any adjustments. this is achieved because the jig automatically aligns the chisel to its flat, machined face. Another benefit is that the se-76 can also clamp short & tapered tools firmly, e.g. japanese chisels. the jig copes with blades up to 76 mm or 3" width. the new square edge jig se-76 has safety stops, which prevent the tool from slipping off the stone, which can hurt your fingers. enhanced housing stiffness from greater reinforcement & material thickness, gives you easier & accurate grinding. The t-3 model

Includes:: the se-76 square edge jig, wm-200 anglemaster, pa-70 honingcompound, hb-10 handbook & dvd-1 tormek instructional dvd. image 2: stainless steel hardware prevents from rust & wear on bearings. image 3: universal support with acme thread. round section without flat machining makes it faster to change position. image 4: improved horizontal base: double locking screws & tighter fit for highest precision. image 5: micro adjust with scale. for a predetermined cutting depth when using the tt-50 truing & dressing tool.

...

Key

Features:
stainless steel shaft
7 year guarantee
supplied complete with se-76




...

Key

Features: Stainless steel shaft 7 Year guarantee Supplied complete with SE-76 Square Edge Jig,

...

Package deal comprises the tormek t-7 water cooled sharpening system, tormek htk-705 hand tool kit & the sjobergs smaland workbench. tormek t-7 water cooled sharpening system
200w motor. heavy duty steel construction. water-cooled sharpening wheel. leather honing wheel. comprehensive range of accessories. tormek htk-705 hand tool kit
kit contains: svm-45 short knife jig. svm-140 long thin knife jig. svx-150 scissor jig. svs-32 short tool jig. sva-170 axe grinding kit. all contained in a quality storage box. sjobergs smaland workbench
built to last. made from high quality scandinavian timber, with thick mdf tops. minimal self assembly. hard wearing, easily cleaned laminate top. supplied with vice & bench dogs. l 1000 x w 500 x h 820mm.


...

The new t-7 model improves the accuracy & safety in edge tool sharpening thanks to two new innovations, a square edge jig & a truing & dressing tool with screw feed. these developments also make the sharpening more user friendly. Conventional jigs on the market require that you align the tool in the jig with mounting screws which is time consuming & you lose the exact repeatability at each sharpening. the new tormek square edge jig solves this problem & the chisel will be ground square, i.e. at 90 degrees, each time without any adjustments. this is achieved because the jig automatically aligns the chisel to its flat, machined face. Another benefit is that the se-76 can also clamp short & tapered tools firmly, e.g. japanese chisels. the jig copes with blades up to 76 mm or 3" width. The new square edge jig se-76 has safety stops, which prevent the tool from slipping off the stone, which can hurt your fingers. The other development is a truing & dressing tool tt-50 with screw feed. this enables the user to keep the stone in perfect condition, which is essential for a perfectly sharpened edge. A seven year warranty applies to all customers including industrial users. this is possible due to the enhanced coating of the housing, stainless steel main shaft & a powerful, industrial ac motor, which is designed for continuous operation. included with the tormek t-7: se-76 square edge jig. tt-50 truing & dressing tool. sp-650 stone grader. wm-200 anglemaster. pa-70 honing compound. hb-10 handbook. dvd-1 tormek dvd. Image 2: truing & dressing tool with screw feed.
image 3: stainless steel hardware.
image 4: universal support with acme thread.
image 5: enhanced horizontal base.
image 6: micro adjust with scale.
.




...

Tormek t-7 water cooled sharpening system:
200w motor
heavy duty steel construction
water-cooled sharpening wheel leather


...

The tormek t-7 sharpening system raises the standards of such sharpening systems further & offers a premium sharpening solution. The t-7 also offers a 200w motor, heavy duty steel construction, water-cooled sharpening wheel & leather honing wheel but the kit of accessories has been extended to contain the new tt-50 truing & dressing tool, the sp-650 stone grader & the new se-76 square edge jig which has an increased capacity of 76mm (3") & has safety stops to prevent chisels running off the side of the stone. the comprehensive range of specialist grinding jigs makes this the first choice for amateurs & professionals alike. tools can be sharpened either with the supergrind wheel cutting towards the edge, or by using the xb 100 support base, grinding away from the edge (preferable in some cases, especially with carving tools). The main tool support bar is fitted with a micro-adjuster which makes setting up or replicating a sharpening angle both easy & highly accurate. the t 7 package
Includes:; tt-50 truing & dressing tool, sp-650 stone grader, se-76. tormek htk-705 hand tool kit:

this kit of jigs is perfect for those using most of the main hand tools. kit is packed in a quality storage box for bench or wall mounting & contains the following tormek machine accessories: svm-45 short knife jig
svm-140 long thin knife jig
svx-150 scissor jig
svs-32 short tool jig
sva-170 axe grinding kit
. tormek tnt-708 woodturner's accessory kit:
a comprehensive kit of jigs for those using wood turning tools
- this kit offers tormek accessories at great value for your money.

kit contains the following tormek machine accessories:
svd-185 universal gouge jig
svs-50 multi jig
svd-110 torlock toolrest
tts-100 turning tool setter
la-120 honing wheel
mh-380 protective cover
tnt-300 dvd & tuition manual

model: t-7
nett weight: 14.2kg
overall l x w x h: 270 x 250 x 325mm
power: 200w
wheel diameter: 250mm
wheel

Width: 50mm
.




























...