If you requie an accurate length of workpiece when trimming at 45 degrees, particularly when making a picture frame, this attachment is essential. The measuring scale runs right across the two beds & allows for picture frame moulding rebates to be accounted for. Image shown of mitre trimmer with the length attachment. for reference only. ...

This is not an ordinary hand mitre saw. logan have made special modifications including a specially calibrated scale which allows picture frame mouldings to be cut to the size of the internal rebate without any extra measuring. two soft foot clamps securely hold the moulding to the bed, the blade is held rigid in a specially designed guide & the fine pitch sawblade fitted gives a superb finish, ready for pinning. an automatic lock holds the blade safely out of the way when repositioning the cutting angle. specifications: blade length: 500mm. blade pitch: 24tpi. measuring scale left: 840mm. measuring scale right: 400mm. maximum cutting

Height: 70mm. maximum cutting
Width: 80mm. preset angle locks: 0, 15, 22.5 & 45 degrees. dimensions (w x d x h ): 1400mm x 680mm x 370mm. weight: 8kg. rating: diy.


...

The bearing line has 8 independent bearings which allow travel in any direction & are excellent for large sheet handling applications. the bearing head simply fits onto the same stand giving a dual function stand which can be changed from roller to bearing in a matter of seconds with no tools required. as a useful additional feature the bearing line can be flipped over so that the stand can be used as a length stop. This roller stand also has a single chromed roller & is ideal for applications where a straight feed is required, such as a planer or thicknesser. the feet of the stand are welded to give extra strength & rigidity. the rear leg is hinged & folds flat so that the roller stand can be hung on the wall when not in use. a lever handle sets the height of the stand to suit your application. specification:
roller width 280mm
height adjustable from 660mm to 1100mm
column size 25mm
dimensions (wxdxh) 430mm x 500mm x 1100mm
weight 4kg
rating hobby
warranty 1 year
.







...

The bearing line has 8 independent bearings which allow travel in any direction & are excellent for large sheet handling applications. The bearing head simply fits onto the same stand giving a dual function stand which can be changed from roller to bearing in a matter of seconds with no tools required. As a useful additional feature the bearing line can be flipped over so that the stand can be used as a length stop. ...

New british designed foot operated underpinner. fantastic value for the occasional diy or artist framer, offering the ease ...

This new british designed underpinner is very simple to use thanks to its advanced features. the sliding fence allows for multiple wedges (also known as v nails) to be inserted into the same corner. there is a front & back limit stop, which can set to keep wedge positions accurately placed. When using tall mouldings the fence can be locked in position to allow wedges to be stacked two on top of each other, therefore two 10mm wedges become a 20mm wedge. there are two foot pedals. the right hand one operates the moulding rebate clamp which securely grips the moulding from the front before pinning. Another great feature on this machine is that when adjusting the fence, to insert a second wedge, the rebate clamp also travels with it, so that the moulding always remains tightly clamped. The left hand pedal has a dual action. firstly the top clamp is lowered so that the moulding is now clamped in two directions. secondly the wedge is inserted underneath the moulding. to again increase the simplicity of the m 3 there is a green indicator light which illuminates when the wedge has been fully inserted & the operation is finished. Supplied with two extension tables, l shaped pressure pad, round pressure pad, pedal restrictor for smaller mouldings & wedge magazine height adjusting tool. specifications:
maximum moulding
Width: 100mm. maximum moulding
Height: 75mm. minimum moulding
Width: 10mm. minimum moulding
Height: 10mm. wedge
Sizes: 7mm to 15mm. dimensions (wxdxh): 730mm x 800mm x 1110mm. weight: 30kg. rating: light trade. warranty: 1 year.





...

This new British designed underpinner is very simple to use thanks to its advanced features. The sliding fence allows for multiple wedges (also known as V nails) to be inserted into the same corner. There is a front & back limit stop, which can set to keep wedge positions accurately placed. ...

This new 28 led magnetic light is ideal for any diy use where better lighting is required. ideal to be used with a lathe, bandsaw, fretsaw, drill press & many other types of machinery. The flexible arm is 370mm long & is fixed onto a magnetic base that can be turned on & off allowing the led light to be securely attached to any steel or cast iron surface. With 28 led lights it produces more intense light than a traditional bulb with the added advantage of emitting very little heat. the power cinsuption for led bulbs is also a fraction of traditional type bulbs. there is a seperate on / off switch for the led light & it runs off a 240v 13amp socket & comes complete with a 2m cable. ...