The ZyWALL 2 plus supports ICSA certified IPSec VPN connections, ideal for the use between remote sites and central servers. The IPsec based coding over the Internet ensures a safe data communication. Thus eliminating expensive leased lines. World-wide connection - at the minimum price. With the redundant IPSec VPN feature, the ZyWALL 2 plus develops an additional backup-tunnel into the firm centre. The ICSA certified Firewall of the ZyWALL 2 plus offers high Firewall protection and reliable security. Based on Stateful packet Inspection and Denial of service (DOS), it represent an effective protection against hackers, network intruders and other threats. The Bluecoat content filter service protects the network users against the visit of unwanted or illegal web pages. The ZyWALL 2 plus optimizes the information flow-rate, based on IP addresses or applications. The necessary bandwidth can be made available: critical applications, services or single IP-addresses. The ZyWALL 2 plus offers highest reliability with assistance of Fail Over and Fail bake technology. This technology reroutes the data traffic at the WAN port to backup ISDN or analogue modem, if the WAN connection fails. When WAN connection is re-established traffic is automatically redirected again. Also an additional gateway can be connected with the ZyWALL 2 plus, whereby one guarantees the Internet access by a secondary network. The backup functions of the ZyWALL 2 plus increase the reliability, whereby the costs of maintenance, IT-consultation and daily enterprise are reduced. With the extended DMZ are better in the SOHO range servers and more surely attainable Or a WLAN can be operated independently of the LAN. In any case this Security zone has its own IP-Subnet with own DHCP range within the ZyWALL 2 plus.
In cabled network, each end-unit must be connected with the router separately. Free data links are soon out of supply. The switch functions as a distributor and takes care for additional connections. With the high value upper surface and the blue LED, it perfectly matches in every environment. All ports support automatic uplink detection. This means you don't need a criss-cross of cables if you want to connect it to your router or another switch.
This gigabit switch from D-Link makes available 5 LAN connections for the network. Attached devices are always interconnected with the max. speed in each case. If 100 MBit/s are sufficient for the fastest Internet connection to rout, then 1000 MBit/s are fast for copying large data sets straight enough.
The Gigabit-Switch by D-Link belongs to a series of devices that are fitted with the "D-Link Green" technology. This enables saving of energy, low heat loss and a longer life without any loss in performance and functions. With its energy-efficient power supply (Energy Star Level V), the reduced use of hazardous substances (RoHS-compliant) and the reusable packaging material the switch is extremely environmentally-friendly. Save power The DGS-1008A automatically saves power through different methods. The device automatically disables ports without connection, through which a lot of power is saved, since unused ports and the ones connected to switched-off computers do not consume any power. Environment-friendly. The 8-port Gigabit-Switch was developed with the environment in mind. It meets the requirements of Energy Star Level V as well as fulfils the strict CEC and MEPS-guidelines that demand energy-efficient power supplies. The switch was produced in conformity with RoHS-specifications, in order to minimise the use of hazardous substances, and is delivered in a reusable packing that reduces the occurrence of trash as per the WEEE-guideline.
This D-Link Gigabit Switch provides your network with 5 LAN connections. Attached devices are always interconnected with the maximum possible speed. If 100 MBit/s are sufficient for the fastest Internet to router connection then 1000 MBit/s are just fast enough for copying large data sets.
The D-Link Gigabit Switch belongs to a series of devices fitted with D-Link Green technology. This saves energy, produces less heat and extends service life without any loss in performance or function. With its energy-efficient power supply (Energy Star Level V), reduced use of hazardous substances (RoHS compliant) and reusable packaging material, this switch is extremely eco-friendly. Save power The DGS 1008A automatically saves power using various methods. The device automatically disables disconnected ports. This saves considerable amounts of energy as unused ports and ports connected to switched-off computers do not consume any power. Environmentally-friendly. The 8-port Gigabit Switch was developed with the environment in mind. It meets the requirements of Energy Star Level V and fulfils the strict CEC and MEPS guidelines that demand energy efficient power supplies. The switch was produced in conformity with RoHS specifications to minimise the use of hazardous substances and is delivered in reusable packing that reduces the production of waste in accordance with the WEEE guidelines.
This gigabit switch from D-Link makes available 5 LAN connections for the network. Attached devices are always interconnected with the max. speed in each case. If 100 MBit/s are sufficient for the fastest Internet connection to rout, then 1000 MBit/s are fast for copying large data sets straight enough.
The Gigabit-Switch by D-Link belongs to a series of devices that are fitted with the "D-Link Green" technology. This enables saving of energy, low heat loss and a longer life without any loss in performance and functions. With its energy-efficient power supply (Energy Star Level V), the reduced use of hazardous substances (RoHS-compliant) and the reusable packaging material the switch is extremely environmentally-friendly. Save power The DGS-1008A automatically saves power through different methods. The device automatically disables ports without connection, through which a lot of power is saved, since unused ports and the ones connected to switched-off computers do not consume any power. Environment-friendly. The 8-port Gigabit-Switch was developed with the environment in mind. It meets the requirements of Energy Star Level V as well as fulfils the strict CEC and MEPS-guidelines that demand energy-efficient power supplies. The switch was produced in conformity with RoHS-specifications, in order to minimise the use of hazardous substances, and is delivered in a reusable packing that reduces the occurrence of trash as per the WEEE-guideline.
Sturdy and compact Gigabit Switch in a stylish Silver look. The QoS ports are given priority for traffic across the switch. When telephoning over the Internet with VoIP the speech quality is always good, even when large quantities of data are simultaneously transferred over the network.
The 8-Port gigabit Ethernet switch from ZyXEL offers high flexibility and broadband connectivity to servers, workstations or other connected devices. With the gigabit connectivity the GS-108A speeds up the data transfer rate and is able to transfer large files via the network, while remaining dialogue oriented with all 10, 100 and 1000-Mbit/s devices. The compact design makes it perfect for wall mounting or as a desktop solution. Non blocking switching features make it ideal for use at home or in small office networks.
The Zykel Gigabit Switches save power efficiently and meet the energy-efficient Ethernet standard. This succeeds by monitoring the emerging data volumes within the network; the power consumption is regulated depending on load. This noiseless switches are ideal for office environments. The simple plug-and-play and environmentally-friendly technology offers high user-friendliness and good performance
The Zykel Gigabit Switches save power efficiently and meet the energy-efficient Ethernet standard. This succeeds by monitoring the emerging data volumes within the network; the power consumption is regulated depending on load. This noiseless switches are ideal for office environments. The simple plug-and-play and environmentally-friendly technology offers high user-friendliness and good performance
Cost effective solution for companies that intend to integrate individual PoE devices in their non PoE-enabled networks. Thanks to the Gigabit-support, even the especially powerful access points, like the LANCOM L-310agn and the L-305agn can be connecte to the non-PoE-enabled Gigabit switches with the help of the injector. This saves costs, especially in small installations. Using an auto-sensor, the algorithm PoE devices are automatically detected and safely supplied with power. Due to the integrated power supply are out of the enclosed power supply to operate the injector requires no additional components. Side rails on the unit make it possible to combine several injectors with each other.
Expanding companies in today's world have greater requirements from and must have absolute trust in their network, which runs an ever increasing number of applications. They use VoIP telephones and IP cameras, and require more than one plug and play connection. Internet-based applications such as Hotmail and Google Calendar turn a functioning network into an indispensable factor in a company's success. At the same time, companies may not have the extra funds or time required for advanced training to be able to work with complex managed switches. The ProSafe Plus Switch from NETGEAR solves this problem: It is easy to install and requires hardly any prior knowledge for configuration. The switch provides a performance overview of your network via Traffic Monitoring and helps diagnose connectivity problems: A cable diagnostics test identifies and localises weak points causing your problems. The ProSafe Plus Switch optimises the traffic in your network by enabling both port-based and tag-based prioritisation. This means that any traffic that cannot wait always has priority over less critical traffic packets. The VLAN technology of the switch increases security and allows management of domain collisions. The ProSafe Plus switches offer an excellent price-performance ratio and enable professional network management.
This switch is fitted with five gigabit ports and is easy to install with its self-learning system. The Intellinet gigabit Ethernet desktop switch is suitable for private and small office applications, and fulfils all the network requirements through its high speed. The metallic casing provides a good protection and the compact design also enables an installation on the study desk. High-speed performance: The desktop switch with five gigabit Ethernet ports offers a high performance for a fast data transfer, in order thus to support mirroring of data carriers, backups, transfer of large image files and other applications that use bandwidth intensively. & - Auto features: This switch contains many automatic features, in order to make the use as simple as possible. No configuration is needed for the plug-&-play installation. Through Auto-MDI/MDI-X detection on all ports, cross-over cables are no longer needed. Each of the five connections automatically detects the connection speed of the connected devices and adjusts it to 10, 100 or 1000 Mbps, in order to get the maximum performance. Reliable use: The gigabit Ethernet Desktop Switch supports for a continuous and uninterrupted network connection Flow Control in the half-duplex mode and IEEE 802.3ab in the full-duplex mode. This, together with Broadcast Storm Control, also takes care of a high net load for a secure connection.
The managed Layer 2 Fast Ethernet Switch ES-2108 is robust, intelligent, and above all, compact. In small working groups a 19" switch can be dispensed with without any resulting limitations to the system configuration or security. The device enables the support of MAC Filtering, Freezing and Specific MAC Forwarding as well as the implementation of security policies, which are based on the device&rsquo s MAC addresses.
With Power-over-Ethernet the devices can be placed flexibly inside and outside the building regardless of a socket. Through this technology power can be supplied to the IP-enabled devices via the network cable. In complex wireless LAN installations and in building surveillance with IP cameras the PoE-components drastically reduce the installation costs, since no power line need be laid to the place of installation. The switch detects automatically, whether a PoE-device is connected and which voltage does it need. Hereby, the maximum possible PoE power of 15.4 watt is available at every port. If a device is connected, which does not have a PoE support, the switch detects this too and no voltage is applied, so that the device is protected against damage. The PoE-switch has a robust metallic casing and can also be installed 48.3 cm (19"), so that it finds place in every conventional server rack. The eight RJ45 network ports automatically detect the transfer rates of the connected devices (10 or 100Mbit/s). The full and half-duplex operation makes available maximum 200 MBit/s per port.
This industrial-Switch is suitable for mounting on the DIN rail. This results in countless application possibilities. The power is supplied via a 24 V power supply. For the highest availability an additional 24 V power supply can be connected (Redundant power supply).
This compact switch is designed especially for the SoHo-range. It offers 16 10/100 MBit-connections for the workstation computer. All connections automatically detect the transmission rate (10 MBit/s or 100 Mbit/s) of the connected computer. The connections also differentiate automatically between full- and half-duplex mode and support flow-control. Flow-control according to IEEE 802.3x enables a direct connection between server and switch for a fast and reliable data transmission. With 200Mbit in full-duplex-mode this switch makes available high-speed data channels with the lowest loss rate to your server.
This desktop switch is designed for the SoHo-range and working groups. It offers 24 10/100 MBit connections for the workstation or the computer. Hubs can also be connected to the switches. All connections automatically detect the transmission rate (10 MBit or 100 Mbit) of the connected computer. The connections also differentiate automatically between full and half duplex mode and support flow-control. The DES-1024D is easily extensible due to auto uplink, and thus it offers a quick and safe option for the enlargement of the network. Flow-control according to IEEE 802.3x enables a direct connection between server and switch for a fast and reliable data transmission. With 200Mbit in full duplex mode this switch makes available high-speed data channels with the lowest loss rate to your server. The DES-1024D is fanless and is therefore suitable for use directly in the workplace or best suited as a patch cable distribution. Through the included mounting material, it can be installed in a 48.3 cm (19 ") cabinet or rack.
This compact switch is designed especially for the SoHo-range. It offers 8 10/100 MBit-connections for the SoHo-range. All connections automatically detect the transmission rate (10 MBit/s or 100 Mbit/s) of the connected computer. The connections also differentiate automatically between full- and half-duplex mode and support flow-control. Flow-control according to IEEE 802.3x enables a direct connection between server and switch for a fast and reliable data transmission. With 200Mbit in full-duplex-mode this switch makes available high-speed data channels with the lowest loss rate to your server.
This compact switch offers eight plug & play connections to small offices, workgroups and department networks with 10/100/1000MBit. The Gigabit switch manages without fans and is this optimally suitable for use directly at the workstation. The DGS-1005D supports speeds of up to 2000MBit/s (full-duplex) as well as flow control according to IEEE 802.3x for fast and continuous data transfers. In order to ensure a reliable data transfer also in time-critical applications, the desktop-switch supports the protocol 802.1p (QoS).
Optimally co-ordinate with the LANCOM Product portfolio the LANCOM Ethernet switch ES-1108P supports the structured wiring for home offices and small offices. Four Power over Ethernet ports ensure high flexibility for the positioning of PoE-conformer VoIP phones or access points. Included in delivery for installation in 19-inch cabinet with the appropriate adapter with the phone. The LANCOM ES-1108P can thus retrospectively perfectly integrate into existing infrastructures.
The Desktop Ethernet Switch with 16 ports and integrated power supply is designed to enhance performance and efficiency of your network. With the N-way auto-negotiation function, the ES-116P is in a position to connect network devices with the highest possible network speed and automatically activate the duplex mode. unlike shared 10/100 Mbps networks, the ZyXEL Desktop Ethernet Switch series eliminates congestion by allocating a dedicated wide band. Its duplex mode doubles the effective band width, by enabling two-way communication. In addition, Store-and-forward service brings low latency and error-free packet transmission Plug and play, as the compatibility with various network protocols make the installation and management of the ES-108P/116P/124P easier and faster than ever before. Due to its small size, the switch will find, for example, by wall mounting into any working environment. No matter how high your network demands are, ZyXEL's Desktop Ethernet Switch with integrated power supply needs fulfils them with an affordable and reliable networking solutions that are particularly suitable for the SOHO sector.
The ES-5500G is an ideal and energy-saving switch, with integrated 10/100/1000 MBit/s gigabit-connections. It is designed in such a way that the transmission of large files over the network at high speeds is possible. The switch can detect the length of the connected ethernet cables and automatically regulates the energy supply. In this way the power consumption is reduced, if connections are not used. The ES-5500G corresponds to the standard IEEE802.3, IEEE802.3u and IEEE802.3ab. The switch uses a non blocking circuit structure so the network can be used with full speed. It has a flow control in full-duplex mode and counter-pressure for the half-duplex-mode, in order to ensure a reliable data transfer and to prevent data loss. You can use the ES-5500G to build up a high-speed network and benefit from the ultimate power and reliability. In addition it supports the ES-5500G Jumbo-Frame, to expand the Ethernet frame-size up to 9600 bytes and increase the data transfer rate. This economical switch is the first choice for small offices or domestic use. Easy Plug-and-Play installation, as it supports ES-5500G auto-MDI/MDI-X. You can use a straight-through or cross-over-ethernet cable and integrate 10, 100 and 1000 MBit/s-devices in the ES-5500G. The switch recognizes the right cable and the correct speed for the device automatically.
The GS108T has eight 10/100/1000 MBit/s ports, it supports jumbo frames and deals with 2000 MBit/s data throughput in full duplex operation. The switch therefore is particularly useful for small businesses and workgroups, as well as for expansion of existing structures when it comes to high-speed servers or power users. The intuitive web browser interface allows the smart switch to operate easily and intuitively. The configuration of the ports and set up port trunks, VLANs and traffic prioritization or monitor switch performance is thus possible easily and without any prior knowledge. Similarly, the SNMP-based software can also be used to manage your smart switch.
The GS108T possess progressive functions such as Access Control Lists (ACL), port authentification according to 802.1x, improved QoS and IGMP Snooping.
The 8-Port Gigabit switch from Belkin makes a simple upgrade of your network for you possible, whereby you can reach Gigabit speeds during the transmission. The switch is downward compatible to your existing 10/100-Network, can be instantly attached and makes possible a high performance immediately. It offers a low-priced possibility to your servers and work stations; it transfers large video, audio and graphics files everywhere within your network at Gigabit speeds. The Switch does not has an exhaust and is thus noiseless Each port automatically detects the correct speed as well as the appropriate mode (full or half duplex). Auto Uplink technology makes possible an automatic adjustment for 1:1 wired and Crossover cables A constant flow of data can be guaranteed up to 3x by the corresponding flow-control according to the IEEE802 standard
Belkin network Switches are designed for a comfortable integration of Ethernet and fast Ethernet devices These Switches offer a low-priced solution for the common use of an Internet connection, of email, printers, files, playing Multiplayer and hard disks A computer is attached at the modem and the switch This functions as Internet access point of all inter-connected computers By Internet Connection Sharing software for common utilization of Internet Sharing, you can use your Internet connection with up to seven additional computers. The network can be easily expanded: Simply attach more switches to the Uplink interface The Switch does not has an exhaust and is thus noiseless Each port automatically detects the correct speed as well as the appropriate mode (full or half duplex). Auto Uplink technology makes possible an automatic adjustment for 1:1 wired and Crossover cables A constant flow of data can be guaranteed up to 3x by the corresponding flow-control according to the IEEE802 standard
Belkin network Switches are designed for a comfortable integration of Ethernet and fast Ethernet devices These Switches offer a low-priced solution for the common use of an Internet connection, of email, printers, files, playing Multiplayer and hard disks A computer is attached at the modem and the switch This functions as Internet access point of all inter-connected computers You can use your Internet connection with up to four additional computers for the common use of the Internet connection via the Internet Connection sharing software The network can be easily expanded: Simply attach more switches to the Uplink interface The Switch does not has an exhaust and is thus noiseless Each port automatically detects the correct speed as well as the appropriate mode (full or half duplex). Auto Uplink technology makes possible an automatic adjustment for 1:1 wired and Crossover cables A constant flow of data can be guaranteed up to 3x by the corresponding flow-control according to the IEEE802 standard
With an information flow-rate of up to 2000 MBit/s in the Full duplex mode the FS726TP is ideal for the binding at server or to a Gigabit backbone, in order to transfer large multimedia files, images or video files. With 24 Ethernet-ports, 2 Gigabit ports and a SFP slots for optional fibre connections, it is ideal for increasing networks. This High performance switch with its blocking-free Wire speed architecture and a Switching capacity of 32 GBit/s provides for a maximum at information flow-rate. All 26 RJ45-Ports support auto sensing and auto Uplinkâ„¢ for an optimal connection. The management becomes particularly user friendly by the intuitive, Web-Browser-based interface of the smart switch management software. This provides for a simple operation, with which the performance can be supervised and ports become configured, up to from attaching Port trunks, VLANs and Traffic Prioritization. Alternatively the Smart switch can be administered naturally also with the SNMP-based software.
The ALL8824 is the perfect base for small and medium-sized working groups with high network and data volumes for quickly transferring files within the network. Its 24 ports for 10, 100 and 1000 MBit/s offer a perfect high-performance connection for your workstations and servers. You also do without the external mains adapter frowned upon in the industry, as this is already integrated in the housing. The fanless design of the ALLNET ALL8824 also makes it ideal for an office environment as it generates no disruptive noises at all. The switch is compatible with the IEEE802.3x standard and works on a layer 2 basis. A total of 8 K MAC storage and 9 K jumbo frames ensure optimum performance for your network.
The ES-5500M is an ideal and energy-saving switch, with integrated 10/100/1000 MBit/s gigabits-connections. It is designed in order to allow the transmission of large files over the network at high speeds. The switch can detect the length of the connected Ethernet cable and automatically regulate the supply of energy. This also reduces power consumption when connections are not used. Internal power supply and robust metal housing metal housing and internal power supply for the full range The full range internal power supply of ES-5500M and the metal housing ensure a long life and excellent reliability. The ES-5500M complies with the IEEE802.3, IEEE802.3u and IEEE802.3ab. The switch uses a non-blocking switch fabric, so the network can be used at full speed. It has a flow control in full duplex mode and backpressure for half duplex mode to ensure reliable data transmission and to prevent data loss. Take advantage of the ES-5500M to build a gigabit high-speed network, and enjoy the ultimate performance and reliability. In addition the ES-5500M supports Jumbo-Frame, in order to extend the ethernet frame-size to a maximum of 9600 bytes in order to increase the data transfer rate. This economical switch is the first choice for small offices or domestic use. The ES-5500M supports the PnP (Plug and Play) installation and auto-MDI/MDI-X function. You can use the ES-5500M with computers or network devices without having to deal with the configuration. You can also use either straight or cross Ethernet cable and 10 and 100 Mbit/s-devices with the ES-5500M combined with one another. The switch detects the right cable and corrects the speed for your device automatically.
The GX1005B switch is an efficient and cost-effective solution for home and small office users. This switch provides rapid high-performance Ethernet switching in a stylish, compact design and low power consumption. The fan-less design guarantees a quiet work environment. With the help of ASUS usual quality, you can be sure that your network offers permanent and problem free connections.
These platinum series gigabit switches offer high-performance also to smaller networks in private environments with a transfer rate of 10/100/1000 MBit/s. The switches are easy to operate and combine design and performance in an optimal solution. In addition, they can be easily set up either on top of each other or stood upright in specially designed stands.
This is a high performance Gigabit copper switch. It enables an easy upgrade of an existing network to a transfer rate of 1000 MBit/s at (Cat.5). It can be used for standard fast Ethernet networks, as well as for 1000 MBit/s Gigabit networks and is particularly suitable as desktop devices, because it has no fan and is therefore silent.
The Intellinet Gigabit Ethernet desktop switch provides top speeds to meet your network requirements and is ideal for home or small offices. This desktop switch with five Gigabit Ethernet ports offers high performance for your network to allow fast data transfer rates for backups, graphics and other bandwidth-intensive applications.
The ES-5800M is an ideal and energy-saving switch with integrated 10/100/1000 Mbit/s gigabit-connections. It is designed in such a way that the transmission of large files over the network at high speeds is possible. The switch can detect the length of the connected ethernet cables and automatically regulates the energy supply. In this way the power consumption is reduced, if connections are not used. Internal power supply and robust metal housing The internal full-range power supply of the ES-5800M and the metal housing guarantee a long life and excellent reliability. The ES-5800M corresponds to the standard IEEE802.3, IEEE802.3u and IEEE802.3ab. The switch uses a non blocking circuit structure so the network can be used with full cable speed. It has a flow control in full-duplex mode and counter-pressure for the half-duplex mode, in order to ensure a reliable data transfer and to prevent data loss. You can use the ES-5800M to build a gigabit high-speed-network, and you can benefit from the ultimate performance and reliability. In addition, the ES-5800M supports jumbo-frame, in order to extend the ethernet frame-size up to 9600 bytes and to increase the data transfer speed. This economical switch is the first choice for small offices or domestic use. The ES-5800M supports the PnP (plug and play) installation and auto-MDI/MDI-X function. You can use the ES-5800M with computers or network devices without having to deal with the configuration. You can also use either a straight or cross ethernet cable and combine 10 and 100 MBit/s-devices with the ES-5800M. The switch automatically detects is the right cable and the correct speed for the device.
Stable and compact Gigabit-Switch in a stylish Silver look. Perfectly suitable for wall mounting or as a desktop solution. It can be deployed networks, as well as in 1000 M BIT/s Gigabit networks, both in traditional Fast Ethernet. Even mixed operation is possible.
The FS116P supplies data and current at the same time over a Cat5-cable. It uses thereby the PoE technology (power over Ethernet). The 16 Fast-Ethernet-ports can be used for each 10/100 MBit/s binding. Attention of ports can transfer additional current, based on the standard IEEE802.3af. Extended auto sensing algorithms give security that only 802.3af-terminals are supplied with current. If attached PoE equipment becomes suspended, the current supply is turned off automatically. PoE simplifies and optimizes the network installation, since attached terminals are no more dependent on an obvious current plug socket. This applies particularly to access points, monitoring cameras and similar equipment, since these can to be now always placed at the optimal location.
Edimax ES-3205P is a high-speed-ethernet switch for home and small businesses. ES-3205P is not only compliant with the IEEE 802.3 / 802.3u 10/100 MBit/s ehternet standard, but also supports the full-duplex transmission. With the full-duplex the network speed can be doubled. It is used for high-speed server or switch-to- switch connections. The maximum flow rate of each connection can be up to 200 MBit/s. Due to the built and non-blocking store-and-forward architecture of the ES-3205P your network provides full wire speed. It has a flow control in full duplex mode and backpressure for half duplex mode to ensure reliable data transmission and to prevent data loss. You can use the ES-3205P to build a high-speed network and benefit from the ultimate power and Reliability ES-3205P supports PnP (plug and play) installation and auto-MDI/MDI-X function. You can use the ES-3205P with computers or network devices without any configuration. You can also use either straight or cross ethernet cables and 10 and 100 MBit/s-devices and combine with the ES-3205P. The switch will find the right cable and the proper speed for the device automatically.
With Power-over-Ethernet the devices can be placed flexibly inside and outside the building regardless of a socket. Through this technology power can be supplied to the IP-enabled devices via the network cable. In complex wireless LAN installations and in building surveillance with IP cameras the PoE-components drastically reduce the installation costs, since no power line need be laid to the place of installation. With the new management functions, the new ALL8089WPoE is a absolute professional device for modern network control. The management features have been expanded in ALL8089WPoE V2 compared to its predecessor even further. These includes quality of service, IP TOS/DS, 802.1p & port based QoS, VLAN segmentation (IEEE802.1Q VLAN tagging and port based VLAN) and spanning tree, as well as extensive monitoring functions. Everything is easy to control via a web browser. The ALL8089WPoE is thus optimally prepared for modern forms of communication like Voice over IP. The switch detects automatically, whether a PoE-device is connected and which voltage the end-device. Hereby, the maximum possible PoE power of 15.4 watt is available at every port. If a device is connected, that does not have a PoE support, the ALL8089WPoE detects this too and no voltage is applied, so that the device is protected against damage. Via Web management Ports can be switched completely dead to for example boot a device from a distance. The ALL8089WPoE has a robust metallic casing and can also be installed 48.3 cm (19"), so that it finds place in every conventional server rack. The eight RJ45 network ports automatically detect the transfer rates of the connected devices (10 or 100Mbit/s). Because of the full and half-duplex operation a maximum of 200 MBit/s per port is available.
The GX1005 switch is an efficient and cost-effective solution for home and small office users. This switch offers high-speed-ethernet-switching in a stylish, compact design and consumes less power. The fan-less design guarantees a calm work environment. With the help of ASUS usual quality, you can be sure that your network offers permanent and trouble free connections.
The ProSafe Plus switches optimise the traffic in your network by enabling port as well as tag-based prioritisation. In this way the traffic that cannot wait gets preference over the less critical traffic packets. The switch masters the so-called IGMP v3 snooping. This function is necessary for distributing the IPTV data (multicast) via this switch in such a way that there are no disturbing hangers at the TV-set, in case other network devices generate traffic at the same time. The VLAN-technology of the switches enhances the security and enables managing the domain collisions. The ProSafe Plus switches offer you an excellent cost-benefit ratio and enable a network management at a professional level.
The ASUS FX-D1162 has 2 VIP or Priority-Ports. These ports have a higher priority than the other normal LAN-ports. That means, that in the case of a data jam on the network due to low bandwidth, the largest part of the bandwidth will be reserved for the two priority ports. Also all other data packets are stopped in order to transmit only the data traffic with the highest priority on the VIP ports. This ensures that network traffic is routed with the highest priority (such as the RTP stream of a VoIP connection) with the least disruption.
The Intellinet Gigabit Ethernet desktop switch provides top speeds to meet your network requirements and is ideal for home or small offices. This desktop switch with eight Gigabit Ethernet ports offers high performance for your network, facilitating fast data transfer rates for backups, graphics and other bandwidth-intensive applications.
With Power-over-Ethernet the devices can be placed flexibly inside and outside the building regardless of a socket. Through this technology power can be supplied to the IP-enabled devices via the network cable. In complex wireless LAN installations and in building surveillance with IP cameras the PoE-components drastically reduce the installation costs, since no power line need be laid to the place of installation. The ALL8089PoE provides the optimum basis for up to eight PoE-terminals with network and voltage supply by the same cable. The switch detects automatically, whether a PoE-device is connected and which voltage the end-device. Hereby, the maximum possible PoE power of 15.4 watt is available at every port. If a device is connected, that does not have a PoE support, the ALL8089PoE detects this too and no voltage is applied, so that the device is protected against damage. The ALL8089PoE has a robust metallic casing and can also be installed 48.3 cm (19"), so it finds place in every conventional server rack. The eight RJ45 network ports automatically detect the transfer rates of the connected devices (10 or 100Mbit/s). Because of the full and half-duplex operation a maximum of 200 MBit/s per port is available.
The Intellinet gigabit Ethernet switch offers a wide range of features and an excellent data throughput. Extreme flexibility Auto-Sensing sixteen gigabit ports automatically detects the optimal network speed. Extreme data throughput With a backplane speed of 32 Gbit/s, your computers, servers and other network devices have the availability of an adequate performance.
The ALL8855 is the perfect base for small working groups with high network and data volumes for quickly transferring files within the network. Every port has up to 2000 Mbit/s available, thanks to the non-blocking switching mechanism and the full duplex mode. You also do without the external mains adapter frowned upon in the industry, as this is already integrated in the housing. The fanless design of the ALLNET ALL8855 makes it ideal for an office environment as it generates no disruptive noises at all. The compact, black metal housing ensures an inconspicuous presence and is suitable for wall mounting. The switch is compatible with the IEEE802.3x standard and works on a layer 2 basis. A total of 1 K MAC storage, 832 KB buffer storage and 16 K jumbo frames ensure optimum performance for your network.
The Netgear FS752TPS possess 48 10/100 MBit/s ports and additionally four Gigabit Ethernet ports for high speed connections. Two of the Gigabit Ethernet Ports can be equipped optionally with GBIC modules. 24 Fast-Ethernet-Connections is equipped beyond with PoE. On this 24 terminals up to a total load of 180 Watts can be attached and supplied with current. This Switch offers best achievement and scalability with four GBit/s, dual ring and a reliable stacking architecture. Up to six devices or 192 of 10/100 ports can be developed for stack and managed under a own IP address. Nonblocking design of the switches carries simultaneous, full wire speed, low latency information flow-rate to all ports.
With this network-switch upto five devices such as PCs, laptops, network drives or network printer can communicate with each other over the network. This Fast Ethernet switch is designed for modern households that can be easily set up and is because of no in-built fan noiseless The switch can communicate with all other Platinum products stacked on each other. It can be placed upright but also with other Platinum products in the appropriate space-saving stand up.
Edimax ES-3208P is a high-speed-ethernet switch for home and small businesses. ES-3208P is not only compliant with the IEEE 802.3 / 802.3u 10/100 MBit/s Ethernet standard, but also supports the full-duplex transmission. Due to full-duplex, the network throughput can be doubled for each port. It is used for high-speed-servers or switch-to-switch connections. The maximum flow rate of each connection can get up to 200 MBit/s. Due to a in-built not locking and store-and-forward architecture the ES-3208P offers you network connections with full cable speed. It has a flow control in full-duplex mode and counter-pressure for the half-duplex-mode, in order to ensure a reliable data transfer and to prevent data loss. You can use the ES-3208P to build up a high-speed network and benefit from the ultimate power and reliability. ES-3208P supports the PnP (plug and play) installation and auto-MDI/MDI-X function. You can connect the ES-3208P with computers or network devices without any configuration. You can also use either straight or cross ethernet cables and 10 and 100 MBit/s-devices and combine with the ES-3208P. The switch recognizes the right cable and the correct speed for the device automatically.
The fast 1000 MBit/s transfer rate makes it a child's play to copy large quantities of data. Retain your overview in the cable mess too with the integrated status-LEDs (traffic-display), directly at the LAN-port. This considerably simplifies the troubleshooting, since the individual ports can be assigned quickly and uniquely. You also save yourself from the external mains unit for power supply, frowned upon in the industry, since this is already integrated in the casing. With the accompanying fixing screws and magnets the switch can be mounted easily at the wall or at metallic objects.
In contrast to conventional devices, this distribution network needs no wall power supply. Simply use a USB port of any terminal device to provide switch with power. Such as TV equipment, gaming consoles, network-enabled devices in commercial use etc. Convenient power-saving effect: the distribution network consumes power only if the terminal is being used.
The Conrad gigabit switch saves power efficiently and meets the energy efficient Ethernet-Standard. This succeeds among other things by the monitoring of the emerging data volumes within the network, depending on load the power consumption is regulated. In addition, the switch has a Link-Active detection, not occupied LAN-ports can be switched dead. Innovative and energy-saving is the length measurement for connected network cables. Here, for example short cables with less transmission power can be controlled. With a transmission rate of up to 1000 MBit/s, the switch is ideal for the copying large amounts of data over the network. All ports support automatic uplink detection. This means you don't need a criss-cross cable if you want to connect it to your router or another switch.
This magnetic switch can easily be attached to metal objects, such as PC cases, network cabinets, distribution cabinet, etc. Also applicable with the enclosed rubber feet on study table. All ports support automatic uplink detection. This means you don't need a criss-cross of cables if you want to connect it to your router or another switch.
With these gigabit switch from Conrad, 5 LAN connections are available for your network. Attached devices are always interconnected with the max. speed in each case. If 100 MBit/s are sufficient for the fastest Internet connection to rout, then 1000 MBit/s are fast for copying large data sets straight enough.
The fast 1000 MBit/s transfer rate makes it a child's play to copy large quantities of data. Retain your overview in the cable mess too with the integrated status-LEDs (traffic-display), directly at the LAN-port. This considerably simplifies the troubleshooting, since the individual ports can be assigned quickly and uniquely. You also save yourself from the external mains unit for power supply, frowned upon in the industry, since this is already integrated in the casing. With the accompanying fixing screws and magnets the switch can be mounted easily at the wall or at metallic objects.
This 8 +2 ports gigabit smart switch is especially powerful and optimizes each business network. NETGEAR has designed the GS110TP for customers who need a low port density in combination with PoE and gigabit speed capability. The smart switch has 8 dedicated 10/100/1000 Mbit/s copper ports for connecting to your terminal and two additional gigabit ports for uplinks fibre connect, if you need a longer range. With PoE capabilities on all 8 copper ports GS110P can automatically manage the attached PoE devices dynamically, make power allocations and priorities assigned. It provides up to 15.4 W power for devices such as wireless access points, IP phones and IP cameras simultaneously and it allows you great flexibility and easy management of your network. The GS110TP has extensive features, such as Benefit VLAN and QoS, Access Control Lists (ACL), 802.1x port authentication, rate limiting, IGMP snooping and more. The Smart switch provides performance and reliability for companies with networks, which are aligned for growth. With the fan less and compact design the GS110TP offers smoothness and is therefore best suited for any environment - also for rooms, in which noise is not desired. The allocation of priorities can ensure that important data can be delivered efficiently - even during traffic intensive times. Companies that operate as Internet telephony or video conferencing must prefer those and other real-time applications over less latency-sensitive data to ensure reliability and quality of applications. The ability to assign certain traffic priorities allows the quality of latency-sensitive services and applications despite increasing amounts of data.
Thanks to the PoE technology (Power over Ethernet), the GS108P simultaneously provides data and power via a Cat5 cable. Four ports can also transfer power, based on the IEEE802.3af standard. Advanced Auto sensing algorithms ensure that only 802.3af terminal devices are supplied with electricity. If you interrupt an access to a connected PoE device the GS108P automatically supplied power. PoE simplifies and optimizes the network installation, since the connected terminal devices are not assigned any more to the nearby power outlet. Access points, surveillance cameras and similar equipment can be placed immediately at the optimal location.
The ProSafe Plus switches optimise the traffic in your network by enabling port as well as tag-based prioritisation. In this way the traffic that cannot wait gets preference over the less critical traffic packets. The switch masters the so-called IGMP v3 snooping. This function is necessary for distributing the IPTV data (multicast) via this switch in such a way that there are no disturbing hangers at the TV-set, in case other network devices generate traffic at the same time. The VLAN-technology of the switches enhances the security and enables managing the domain collisions. The ProSafe Plus switches offer you an excellent cost-benefit ratio and enable a network management at a professional level.
The ProSafe Plus Switch from NETGEAR solves this problem: It is easy to install and requires hardly any prior knowledge for configuration. The switch provides a performance overview of your network via Traffic Monitoring and helps diagnose connectivity problems: A cable diagnostics test identifies and localises weak points causing your problems. The ProSafe Plus switches optimise the traffic in your network by enabling port as well as tag-based prioritisation. In this way the traffic that cannot wait gets preference over the less critical traffic packets.
The VLAN-technology of the switches enhances the security and enables managing the domain collisions. The ProSafe Plus switches offer you an excellent cost-benefit ratio and enable a network management at a professional level.
For some networks the so-called 'managed switches' are over-dimensioned regarding their functional diversity and are thus frequently very expensive. In these cases the Websmart switches are a good alternative! With the LANCOM GS-1224, LANCOM sets new standards for Websmart switches: The new switch offers the usual security features like 802.1x authentication on all ports and enables a monitoring via SNMP and LAN-monitor. In addition, it possesses effective power-saving functions, such as performance adjustment to different cable lengths and the automatic port switch-off for ports not being used. The fan-less design of the switch immediately brings two benefits: firstly, the power is saved and secondly, the switch works completely without noise, so that it can be used without any problems in offices and business rooms. Convince yourself: With its 20 W power consumption the GS-1224 is around one-third below of what the switches currently available in the market mostly need.
The GX1008B switch is an efficient and cost-effective solution for home and small office networks. This switch offers fast high-speed-ethernet-switching in a stylish, compact design and consumes less power. The fan-less design guarantees a calm work environment. With the help of ASUS usual quality, you can be sure that your network offers permanent and trouble free connections.
With the in the new GX-D1081-switch integrated "Green Network Technology", you can save energy and at the same time run a trouble-free network. Furthermore it has a VIP port or priority port with the highest priority assignment loop, which will ensure that 80% of the data is first sent there.. The SOHO gigabit switch by ASUS is the best solution for low-power high-speed networks for homes and small businesses.
The GX1008 switch is an efficient and cost-effective solution for home and small office networks. This switch offers fast high-speed-ethernet-switching in a stylish, compact design and consumes less power. The fan-less design guarantees a calm work environment. With the help of ASUS usual quality, you can be sure that your network offers permanent and trouble free connections.
The ES-5800G is an ideal and energy-saving switch, with integrated 10/100/1000 MBit/s gigabits-connections. It is designed in order to allow the transmission of large files over the network at high speeds. The switch can detect the length of the connected Ethernet cable and automatically regulate the supply of energy. This also reduces power consumption when connections are not used. The ES-5500G complies with the IEEE802.3, IEEE802.3u and IEEE802.3ab. The switch uses a non-blocking switch fabric, so the network can be used at full speed. It has a flow control in full duplex mode and backpressure for half duplex mode to ensure reliable data transmission and to prevent data loss. Take advantage of the ES-5800G to build a gigabit high-speed network, and enjoy the ultimate performance and reliability. In addition the ES-5800G supports Jumbo-Frame, in order to extend the ethernet frame-size to a maximum of 9600 bytes in order to increase the data transfer rate. This economical switch is the first choice for small offices or domestic use. Easy plug and play installation due to the ES-5800G auto-MDI/MDI-X supports. You can use the straight-through or crossover Ethernet cable, involving 10, 100 and 1000 Mbit / s devices in the ES-5800G. The switch detects the right cable and the corrects the speed for your device automatically.
For the high-performance network of branch locations within or as an edge component in larger networks, it offers 24 gigabit Ethernet ports (including 4 TP/SFP combo ports), a power supply terminal device via LAN cable enable. In addition to Power over Ethernet IEEE 802.3af, the switch has extensive Quality of Service features including priority queuing features for the classification of traffic and access control security mechanisms such as IEEE 802.1X. For seamless integration into the network the LANCOM GS-1224P supports monitoring via SNMP, as well as the Linksys management system. The LANCOM GS-1224P offers with a throughput of 48 GBit/s on the backplane full performance even in utilization. It supports network virtualization with up to 24 active submits for tag-based VLAN assignments optimal, for example, for separate routing of data from different SSIDs from Linksys access points to a Linksys router that implements the VLANs on IPSec with tunnel-in-tunnel. Up to each of 12 ports can be summarizes in eight trunk groups for binding to increase throughput by load balancing (standard-compliant IEEE 802.3ad with LACP) - for example to cascade switches with high-volume on the devices or tie network storage systems ideally. With the Linksys GS-1224P, the power supply network can be controlled efficiently and centrally: Power over Ethernet IEEE 802.3af compliant power supply eliminates the need to separate the different terminal device and simplifyes network installation. Thanks to PoE and gigabit performance, fast network components such as 802.11n Wi-Fi access points are provided easily and inexpensively over the LAN cable to power, and networks with high data rates. The waiver of individual power supplies to the terminal device in favor of a centralized PoE power supply with the LANCOM GS-1224P reduces the energy consumption through to the improved efficiency. The integrated power management helps to achieve further savings with inactive connections and...
With these gigabit switch from Conrad, 8 LAN connections are available for your network. Attached devices are always interconnected with the max. speed in each case. If 100 MBit/s are sufficient for the fastest Internet connection to rout, then 1000 MBit/s are fast for copying large data sets straight enough.
The Conrad gigabit switch saves power efficiently and meets the energy efficient Ethernet-Standard. This succeeds among other things by the monitoring of the emerging data volumes within the network, depending on load the power consumption is regulated. In addition, the switch has a Link-Active detection, not occupied LAN-ports can be switched dead. Innovative and energy-saving is the length measurement for connected network cables. Here, for example short cables with less transmission power can be controlled. With a transmission rate of up to 1000 MBit/s, the switch is ideal for the copying large amounts of data over the network. All ports support automatic uplink detection. This means you don't need a criss-cross cable if you want to connect it to your router or another switch.
The Intellinet PoE Midspan converts standard 110-240V VAC power into low voltage DC. The transmission is made via the existing LAN cable (Cat5 or better) and supplies 802.3af compatible devices. The Poe Midspan has 8 integrated 802.3af PoE ports, which can deliver current of 15.4 W to each port. By adding this device to your network, you can simplify the installation of network devices such as IP telephones, wireless APs and network cameras.
ZyWALL&trade 2 plus is a powerful firewall with security support for tap-proof connections. The integrated processor enables web-based content filtering directly in the firewall. This allows, among other things, undesired URLs and key words to be blocked for the entire network. The improved VPN functions of ZyWALL&trade 2 plus enable an AES encryption rate of 24 MBit/s and 5 VPN connections. Failover and Failback technology redirects WAN port traffic to backup ISDN or analogue modems in the event of a WAN port connection failure. When WAN port connectivity is reestablished traffic is automatically redirected again.
This switch is equipped with five gigabit ports and is easy to install with its self learning system. The Intellinet Gigabit Ethernet Desktop Switch is perfectly suited for private and smaller office applications. All network requirements are fulfilled by the very high speed. The metal housing offers protection and the compact design facilitates installation on the desk also.. High speed performance: the Desktop Switch with five gigabit Ethernet ports offers better performance for fast data transfer in order to support volume mirroring, backups, transmission of large image data and other bandwidth intensive applications. & - Auto features: This switch includes many automatic features to make the operation as simple as possible. No configuration is necessary for Plug and Play installation. Crossover cables are no longer required due to auto-MDI/MDI-X detection at all ports. Each of the five connections automatically detects the connection speed of the connected devices and sets it to 10, 100 or 1000 Mbps, in order to receive maximum performance. Reliable operation: The Gigabit Ethernet Desktop Switch provides support for continuous and uninterrupted network connection flow control in half duplex mode and IEEE 802.3 onwards in full duplex mode. This, in combination with broadcast storm control, offers secure connection even at high net load.
These platinum series gigabit switches make high-performance available to smaller networks in private environments with a transfer rate of 10/100/1000 MBit/s. The switches are easy to operate and combine design and performance in an optimal solution. In addition they can be easily set up either above each other or stood upright in specially designed stands.
With Power-over-Ethernet the devices can be placed flexibly inside and outside the building regardless of a socket. Through this technology power can be supplied to the IP-enabled devices via the network cable. In complex wireless LAN installations and in building surveillance with IP cameras the PoE-components drastically reduce the installation costs, since no power line need be laid to the place of installation. The switch detects automatically, whether a PoE-device is connected and which voltage does it need. Hereby, the maximum possible PoE power of 15.4 watt is available at every port. If a device is connected, which does not have a PoE support, the switch detects this too and no voltage is applied, so that the device is protected against damage. The PoE-switch has a robust metallic casing. The eight RJ45 network ports automatically detect the transfer rates of the connected devices (10 or 100Mbit/s). The full and half-duplex operation makes available maximum 200 MBit/s per port. Through the management functions the PoE switch becomes the absolute professional device for modern network control. The management features include quality of service, VLAN segmentation (VLAN tagging and port-based VLAN) and spanning tree, as well as extensive monitoring functions. The switch is thus optimally prepared for modern forms of communication like Voice over IP. Optimum for linking a small sub-network in average distance. The switch thereby provides eight twisted-pair connections (RJ45) and two slots for an SFP-module. These SFP-ports can also be used as gigabit-ports (RJ45).
Thanks to their compact size these switches are suitable for all work environments. All ports feature functions for the automatic adjustment of transfer rates as well as automatic MDI/MDI-X crossover recognition, so that you do not have to worry about the type of cable used.
The 5-Port Gigabit switch from Belkin makes a simple upgrade of your network for you possible, whereby you can reach Gigabit speeds during the transmission. The switch is downward compatible to your existing 10/100-Network, can be instantly attached and makes possible a high performance immediately. It offers a low-priced possibility to your servers and work stations; it transfers large video, audio and graphics files everywhere within your network at Gigabit speeds. The Switch does not has an exhaust and is thus noiseless Each port automatically detects the correct speed as well as the appropriate mode (full or half duplex). Auto Uplink technology makes possible an automatic adjustment for 1:1 wired and Crossover cables A constant flow of data can be guaranteed up to 3x by the corresponding flow-control according to the IEEE802 standard
Each terminal must be separately connected in the wired network Free connections are always in short supply The switch works like a distributor and provides for additional connections With the high-quality surface and the blue LED, it perfectly fits in every environment All ports support automatic uplink detection. This means you don't need a criss-cross of cables if you want to connect it to your router or another switch.
This 8 Port Switch is very well shielded owing to its metallic casing and as such is the optimum solution for an industrial use. Moreover, it can be mounted below te table or at the wall. This creates order at the work place. In addition, the switch has Gigabit, so 1000Mbit/s is available for copying large amounts of data.
The ALL8816 is the perfect base for small and medium-sized working groups with high network and data volumes for quickly transferring files within the network. Its 16 ports for 10, 100 and 1000 MBit/s offer a perfect high-performance connection for your workstations and servers. You also do without the external mains adapter frowned upon in the industry, as this is already integrated in the housing. The fanless design of the ALLNET ALL8816 also makes it ideal for an office environment as it generates no disruptive noises at all. The switch is compatible with the IEEE802.3x standard and works on a layer 2 basis. A total of 8 K MAC storage and 9 K jumbo frames ensure optimum performance for your network.
The PoE enable FS728TP smart switch offers use of integrated IEEE 802.3af PoE supply with current and data at all 24 ports, whereby the device is suitable ideally for the application with access points, VoIP telephones and IP-based monitoring cameras. Additionally the FS728TP has an intuitive, Web-based management tools for the fast and simple installation and administration. This Switch possess progressive functions such as Access Control Lists (ACL), Port authentification according to 802.1x, improved QoS and IGMP Snooping around small and middle enterprises to make available a network which is designed for growth and at the same time scalable and reliable. 24 10/100-Ports, two 10/100/1000-copper ports and two hot-swappable Small Form factor Pluggable (SFP) Combo Gigabit ports for alternative glass fibre binding take care for increasing enterprise networks, interlaced class rooms and working groups from the outstanding performance profit and hold with the rising requirements by the network step.
With Power-over-Ethernet the devices can be placed flexibly inside and outside the building regardless of a socket. Through this technology power can be supplied to the IP-enabled devices via the network cable. In complex wireless LAN installations and in building surveillance with IP cameras the PoE-components drastically reduce the installation costs, since no power line need be laid to the place of installation. The switch detects automatically, whether a PoE-device is connected and which voltage does it need. Hereby, the maximum possible PoE power of 15.4 watt is available at every port. If a device is connected, which does not have a PoE support, the switch detects this too and no voltage is applied, so that the device is protected against damage. The PoE-switch has a robust metallic casing and can also be installed 48.3 cm (19"), so that it finds place in every conventional server rack. The 24 RJ45 network ports automatically detect the transfer rates of the connected devices (10 or 100Mbit/s). The full and half-duplex operation makes available maximum 200 MBit/s per port. Through the management functions the PoE switch becomes the absolute professional device for modern network control. The management features include quality of service, VLAN segmentation (IEEE802.1Q VLAN tagging and port-based VLAN) and spanning tree, as well as extensive monitoring functions. The switch is thus optimally prepared for modern forms of communication like Voice over IP. Optimum for linking a small sub-network in average distance. The switch thereby provides 24 twisted-pair connections (RJ45) and two slots for an SFP-module.
The ALLNET ALL1268M is a VDSL2-IP-DSLAM switch, which provides up to eight 100 MBit/s network connections via a 2-wire copper cable. This enables existing 2-wire electrical systems in buildings to be used for data services such as Internet access, video-on-demand, IP-TV, voice over IP, video conferencing, telemedicine and much more. If the number of network participants increases, two ALL1268M switches can be connected with one another via the integrated Uplink Gigabit Ethernet interface. Alternatively, multiple ALL1268M's can be combined via a LAN switch which further increases the number of ports. The ALL1268M VDSL2 Master Switch is an ideal solution for providing cost-effective, high performance broadband/multimedia networks for MTUs (multi-tenant units) and MDUs (multi-dwelling units) such as hotels, schools, hospitals and so on.
Up to 8 devices like for e.g. PCs, Notebooks, network drives or network driver can communicate with each other across the network with the network switch. This modern Fast-Ethernet-Switch is intended for use in modern households, can be configured without any problem and makes no noise due to dispensation of a built-in fan.. The switch can be positioned one above the other with all other platinum products. It can also be positioned upright with all other platinum products in a space saving manner.
The GS605AV home theatre network 5-port gigabit switch is ideal for connecting games consoles, Blu-ray players and HDTVs to the Internet. The switch connects up to four devices using a wired network at gigabit speeds and enables interruption-free enjoyment of Internet content in your home network. Enjoy delay-free online gaming without interruptions or packet loss using your XBOX and other games consoles.
The ASUS GX1024X has 24 Fast Ethernet 10/100 LAN ports and thus provides adequate connections for optimum network cabling. In addition, the switch fits inside a 13" rack and is delivered with an appropriate mounting kit. The ASUS SOHO Fast Ethernet Switch is the best solution for energy-saving, high-speed networks for homes and small businesses.
The ProSafe 8 port switch FS108P can supply both data and electricity at the same time over a Cat 5e cable, using Power over Ethernet (PoE) technology. 4 of the 8 ports can additionally provide a supply voltage for end devices, using standards-based IEEE 802.3af Power over Ethernet. Extended autosensing algorithms ensure that only 802.3af end devices will be supplied with electricity, which prevents damage to devices without PoE support. PoE simplifies and optimises network installation, since connected end devices are no longer dependent on a power socket being close at hand. This is particularly beneficial for access points, surveillance cameras and similar equipment, as these can now always be placed in the optimal location (for example, on the ceiling).
Stable and compact switch in a stylish silver look. The QoS ports are given priority for traffic across the switch. When telephoning over the Internet with VoIP the speech quality is always good, even when large quantities of data are simultaneously transferred over the network.
The ALL8898 is the perfect base for small working groups with high network and data volumes for quickly transferring files within the network. Every port has up to 2000 Mbit/s available, thanks to the non-blocking switching mechanism and the full duplex mode. You also do without the external mains adapter frowned upon in the industry, as this is already integrated in the housing. The fanless design of the ALLNET ALL8898 makes it ideal for an office environment as it generates no disruptive noises at all. The compact, black metal housing ensures an inconspicuous presence and is suitable for wall mounting. The switch is compatible with the IEEE802.3x standard and works on a layer 2 basis. A total of 1 K MAC storage, 832 KB buffer storage and 16 K jumbo frames ensure optimum performance for your network."
The ASUS GX-D1051 is a gigabit switch with 5 ports. It offers comprehensive functions for a direct connection to the local networks and individual computers. The GX-D1051 uses the advanced single chip solution and has extensive features that allow a high-speed Internet access. The GX-D1051 is easy to install and provides a cost-effective network connectivity for companies, small businesses and households.
This magnetic switch can easily be attached to metal objects, such as PC cases, network cabinets, distribution cabinet, etc. Also applicable with the enclosed rubber feet on study table. All ports support automatic uplink detection. This means you don't need a criss-cross of cables if you want to connect it to your router or another switch.
With Power-over-Ethernet the devices can be placed flexibly inside and outside the building regardless of a socket. Through this technology power can be supplied to the IP-enabled devices via the network cable. In complex wireless LAN installations and in building surveillance with IP cameras the PoE-components drastically reduce the installation costs, since no power line need be laid to the place of installation. The switch detects automatically, whether a PoE-device is connected and which voltage does it need. Hereby, the maximum possible PoE power of 15.4 watt is available at every port. If a device is connected, which does not have a PoE support, the switch detects this too and no voltage is applied, so that the device is protected against damage. The PoE-switch has a robust metallic casing and can also be installed 48.3 cm (19"), so that it finds place in every conventional server rack. The eight RJ45 network ports automatically detect the transfer rates of the connected devices (10 or 100Mbit/s). The full and half-duplex operation makes available maximum 200 MBit/s per port. Through the management functions the PoE switch becomes the absolute professional device for modern network control. The management features include quality of service, VLAN segmentation (IEEE802.1Q VLAN tagging and port-based VLAN) and spanning tree, as well as extensive monitoring functions. The switch is thus optimally prepared for modern forms of communication like Voice over IP.
The Intellinet 24-port rack mount fast Ethernet switch is a highly efficient 10/100 MBit/s LAN switch with auto detection on every port. The space saving economical design allows you to connect to up to 24 devices in the LAN, while you use only one slot in your distributors cabinet.
The ProSafe Plus switches optimise the traffic in your network by enabling port as well as tag-based prioritisation. In this way the traffic that cannot wait gets preference over the less critical traffic packets. The switch masters the so-called IGMP v3 snooping. This function is necessary for distributing the IPTV data (multicast) via this switch in such a way that there are no disturbing hangers at the TV-set, in case other network devices generate traffic at the same time. The VLAN-technology of the switches enhances the security and enables managing the domain collisions. The ProSafe Plus switches offer you an excellent cost-benefit ratio and enable a network management at a professional level.