This wireless N Parallel-Band router is the ideal solution or home or in the home office. The DIR-825 supports the fast 802.11n standard & achieves wireless transfer rates of up to 300 MBit/s. Four Gigabit LAN-ports ensure a fast data transfer even with cable connection.
Thanks to Parallel-Band technology the simultaneous transfer of radio signals is enabled in the 2.4 GHz- & 5 GHz frequency range. Use the 2.4 G Hz-band for downloads, in order to retrieve e-mails or to surf in the Internet & stream at the same time high-definition videos without interruptions via the 5 GHz-b&. Fast 300 MBit/s is available to you on both the frequencies.
In addition, a guest access can be setup for each frequency b&, which can be isolated from the actual network. In this way it is possible to provide a wireless access to the Internet to the visitors, but not to the sensitive data in the network.
By means of the accompanying D-Link Shareport software it is possible to link & jointly use USB (Universal Serial Bus)-devices like printers, multi-functional devices or external hard disks. Upon connecting a multi-functional device the extended functions (e.g. the scanning & storing of images in the network) can also be used. In addition, the USB (Universal Serial Bus)-port can also be used for configuring the WLANs through Windows Connect Now (WCN).


...

This powerful wireless G Open Source Repeater supports the wireless LAN standard IEEE 802.11g. With a speed of up to 54 Mbit/s the DAP-1160 connects PCs & laptops reliably with the cabled network.

Flexible use through seven different modes
Access point: For a wireless connection of PCs & laptops.
AP-client: The DAP-1160 becomes a client & can thus wirelessly connect network devices, like printers, gaming consoles, PCs
- regardless of the operating system, to a network. Connects in this mode to all the latest D-Link devices.
Wireless Bridge*: Connect two separate networks with each other via radio.
Wireless Bridge with AP*: Connect two separate networks with each other via radio. Wireless PCs & laptops can establish wirelessly a connection to the APs.
Wireless-Repeater: For extending the wireless range of wireless networks. Connects as repeater to all the latest D-Link devices.
WISP client-router (Wireless Internet Service Provider): The DAP-1160 is connected to the access point of the Internet service provider via radio, thus a joint usage of the Internet connection is possible.
WISP repeater: The DAP-1160 is connected to the access point of the Internet service provider via radio thus enabling a joint usage of the Internet connection, for cabled PCs as well as also for wireless clients.

For protecting your data against unauthorised access the DAP-1160 supports the encryption standards WEP, WPA & WPA2. Moreover, additional MAC-address filters can also be setup.
With the accompanying D-Link Click´n Connect software you can configure the DAP-1160 within minutes. The Wizard helps you to setup wireless networks for your home or office & integrates further wireless devices in the network. A user-friendly interface thereby guides you step by step through the menu. The DAP-1160 can be programmed under Linux. Based on the Realtek chipset RTL8186 & fitted with 4MB flash memory as well as 16MB SDRAM programmers can int...












...

This powerful wireless N Open Source Repeater supports the wireless LAN standard IEEE 802.11n. With a speed of up to 300 Mbit/s the DAP-1160 connects PCs & laptops reliably to the wired network.
Through its seven different operating modes, the DAP-1360 can be used flexibly in every environment, depending on the requirement. Access point: For wireless connection of PCs & laptops.
AP-client: The DAP-1360 becomes a client & can thus wirelessly connect to a network devices like printers, gaming consoles, PCs
- regardless of the operating system.
Wireless bridge: Connect two separate networks with each other via radio.
Wireless Bridge with AP: Connect two separate networks with each other via radio. Wireless PCs & laptops can establish a wireless connection to the APs.
Wireless repeater: To extend the wireless range of wireless networks.
WISP client-router (Wireless Internet Service Provider): The DAP-1360 is connected to the access point of the Internet service provider via radio, thus a joint usage of the Internet connection is possible.
WISP repeater: The DAP-1360 is connected to the access point of the Internet service provider via radio thus enabling a joint usage of the Internet connection, for cabled PCs as well as also for wireless clients.

To protect your data against unauthorised access the DAP-1360 supports the encryption standards WEP, WPA & WPA2. Moreover, additional MAC address filters can also be setup. With the Wi Fi Protected set up (WPS) new devices can be integrated in the network. All the security settings are done automatically via a pin-query or by pressing a button.
With the help of the D-Link setup wizards, you can set up your network in just a few minutes. It configures the operating mode of your DAP-1360 & allows the easy integration of new wireless devices onto the network. With the DAP-1360 you can create quickly & simply a wireless network for your home or your office.










...

This compact switch is designed especially for the So Ho-range. It offers 8 10/100 MBit-connections for the So Ho-range. All connections automatically detect the transmission rate (10 MBit/s or 100 Mbit/s) of the connected computer. The connections also differentiate automatically between full- & half-duplex mode & support flow-control. Flow-control according to IEEE 802.3x enables a direct connection between server & switch for a fast & reliable data transmission. With 200 Mbit in full-duplex-mode this switch makes available high-speed data channels with the lowest loss rate to your server. ...

This card is an economical way to connect your PCs with a network. The card is installed in the PCI-slot of the PCs installiert & connected with the Ethernet. Data is transferred with a speed of 10/100 MBit. Full & half-duplex are supported. It is compatible with Windows 95, 98, 2000, NT, XP, ME & a lot of other operating systems. It enables the access to databases, the sending of files & e-mails & the joint usage of printers, scanners & other devices. Upon establishing the connection the card detects the speed automatically & adjusts flexibly to it. ...

With this 1000 Base T PCI adapter you can network your workstation via Gigabit & thus make use of a bandwidth of up to 2000 MBit in full-duplex mode. This means extended security when transmitting time-critical data & an optimised linking to the network & the server.
The DGE-528T is connected to a Cat 5e cabling, accordingly an expensive glass-fibre cabling for connecting to Gigabit gets omitted. The card supports the flow-control for protection against data losses when the network load is high & is compatible with ACPI Power Management.
...

This gigabit switch from D-Link makes available 5 LAN connections for the network. Attached devices are always interconnected with the max. speed in each case. If 100 MBit/s are sufficient for the fastest Internet connection to rout, then 1000 MBit/s are fast for copying large data sets straight enough.

The Gigabit-Switch by D-Link belongs to a series of devices that are fitted with the "D-Link Green" technology. This enables saving of energy, low heat loss & a longer life without any loss in performance & functions. With its energy-efficient power supply (Energy Star Level V), the reduced use of hazardous substances (Ro HS-compliant) & the reusable packaging material the switch is extremely environmentally-friendly.
Save power
The DGS-1008A automatically saves power through different methods. The device automatically disables ports without connection, through which a lot of power is saved, since unused ports & the ones connected to switched-off computers do not consume any power.
Environment-friendly.
The 8-port Gigabit-Switch was developed with the environment in mind. It meets the requirements of Energy Star Level V as well as fulfils the strict CEC & MEPS-guidelines that demand energy-efficient power supplies. The switch was produced in conformity with Ro HS-specifications, in order to minimise the use of hazardous substances, & is delivered in a reusable packing that reduces the occurrence of trash as per the WEEE-guideline.





...