With this antenna you can extend the range of your wireless adapter, access points or gateways. The cable end of this antenna (RP-SMA-connector) can be connected with any wireless device a RP-SMA-connector. In addition, even other devices that are not equipped with a RP-TNC connection can be connected with the included adapter. ...

This powerful wireless G Open Source Repeater supports the wireless LAN standard IEEE 802.11g. With a speed of up to 54 Mbit/s the DAP-1160 connects PCs & laptops reliably with the cabled network.

Flexible use through seven different modes
Access point: For a wireless connection of PCs & laptops.
AP-client: The DAP-1160 becomes a client & can thus wirelessly connect network devices, like printers, gaming consoles, PCs
- regardless of the operating system, to a network. Connects in this mode to all the latest D-Link devices.
Wireless Bridge*: Connect two separate networks with each other via radio.
Wireless Bridge with AP*: Connect two separate networks with each other via radio. Wireless PCs & laptops can establish wirelessly a connection to the APs.
Wireless-Repeater: For extending the wireless range of wireless networks. Connects as repeater to all the latest D-Link devices.
WISP client-router (Wireless Internet Service Provider): The DAP-1160 is connected to the access point of the Internet service provider via radio, thus a joint usage of the Internet connection is possible.
WISP repeater: The DAP-1160 is connected to the access point of the Internet service provider via radio thus enabling a joint usage of the Internet connection, for cabled PCs as well as also for wireless clients.

For protecting your data against unauthorised access the DAP-1160 supports the encryption standards WEP, WPA & WPA2. Moreover, additional MAC-address filters can also be setup.
With the accompanying D-Link Click´n Connect software you can configure the DAP-1160 within minutes. The Wizard helps you to setup wireless networks for your home or office & integrates further wireless devices in the network. A user-friendly interface thereby guides you step by step through the menu. The DAP-1160 can be programmed under Linux. Based on the Realtek chipset RTL8186 & fitted with 4MB flash memory as well as 16MB SDRAM programmers can int...












...

This powerful wireless N Open Source Repeater supports the wireless LAN standard IEEE 802.11n. With a speed of up to 300 Mbit/s the DAP-1160 connects PCs & laptops reliably to the wired network.
Through its seven different operating modes, the DAP-1360 can be used flexibly in every environment, depending on the requirement. Access point: For wireless connection of PCs & laptops.
AP-client: The DAP-1360 becomes a client & can thus wirelessly connect to a network devices like printers, gaming consoles, PCs
- regardless of the operating system.
Wireless bridge: Connect two separate networks with each other via radio.
Wireless Bridge with AP: Connect two separate networks with each other via radio. Wireless PCs & laptops can establish a wireless connection to the APs.
Wireless repeater: To extend the wireless range of wireless networks.
WISP client-router (Wireless Internet Service Provider): The DAP-1360 is connected to the access point of the Internet service provider via radio, thus a joint usage of the Internet connection is possible.
WISP repeater: The DAP-1360 is connected to the access point of the Internet service provider via radio thus enabling a joint usage of the Internet connection, for cabled PCs as well as also for wireless clients.

To protect your data against unauthorised access the DAP-1360 supports the encryption standards WEP, WPA & WPA2. Moreover, additional MAC address filters can also be setup. With the Wi Fi Protected set up (WPS) new devices can be integrated in the network. All the security settings are done automatically via a pin-query or by pressing a button.
With the help of the D-Link setup wizards, you can set up your network in just a few minutes. It configures the operating mode of your DAP-1360 & allows the easy integration of new wireless devices onto the network. With the DAP-1360 you can create quickly & simply a wireless network for your home or your office.










...

This compact switch is designed especially for the So Ho-range. It offers 8 10/100 MBit-connections for the So Ho-range. All connections automatically detect the transmission rate (10 MBit/s or 100 Mbit/s) of the connected computer. The connections also differentiate automatically between full- & half-duplex mode & support flow-control. Flow-control according to IEEE 802.3x enables a direct connection between server & switch for a fast & reliable data transmission. With 200 Mbit in full-duplex-mode this switch makes available high-speed data channels with the lowest loss rate to your server. ...

This compact switch is designed especially for the So Ho-range. It offers 16 10/100 MBit-connections for the workstation computer. All connections automatically detect the transmission rate (10 MBit/s or 100 Mbit/s) of the connected computer. The connections also differentiate automatically between full- & half-duplex mode & support flow-control. Flow-control according to IEEE 802.3x enables a direct connection between server & switch for a fast & reliable data transmission. With 200 Mbit in full-duplex-mode this switch makes available high-speed data channels with the lowest loss rate to your server. ...