Simple, Quick & Cost Effective Way to Blacken & Protect Your Ordinary Metal! No heating or quenching is necessary! Just dip your iron or steel parts in the 3 solutions at room temperature & you will produce an amazing black satin finish in minutes. Perfect for steel & iron. The finish is corrosion resistant satin black that looks great & protects your piece. The kit contains:
- 1 litre of Mild Alkaline Cleaner
- 1 litre of Blacking Solution
- 1 litre of Dewatering Oil.
- 3 x 2.5 ltr plastic tubs Separate blacking solutions are also available. Please note this kit is NOT suitable for: Aluminium & Aluminium Alloys Copper Brass Lead Zinc Stainless Steel Chrome      



...

Acid rain & acid contaminated dust is everywhere. Frost MPS Plus protect all metals (including bright metal) even in salt & acid atmospheres. Very important & often overlooked. You can use Multi Purpose Spray Plus as a cleaner & as a water displacer. It  will protect wire wheels (chrome or painted) & all major metals & alloys. Corrosion often starts in the nooks & crannies, seams
- spotwelds
- panel joints
- alongside fasteners etc. Spray MPS Fluid in to these areas for extra protection. MPS Fluid Aerosol is low in toxicity, does not contain nitrates
- chlorinated substances or heavy metals. Comes with 10cm straw extension tube.



...

Our range of quality engine Enamels are heat & oil resistant to give long lasting British engine colours. To be brushed on. If spraying, thin up to 10% with White Spirit Colours available:   Aluminium, Black, BMC Green, Ford Dark Blue, Landrover Blue (Duck Egg Blue/ Light Green), Ford Green, Ford Red, Gold, Metallic Green, MG Maroon, Pale Blue, Pastel Green, Yellow, Jaguar Semi Gloss Black ...

Ultimate aid for servicing & parking your motorbike * Allows to turn your bike on the spot with the greatest of ease & manoeuvre it in very confined spaces * The bike only needs to be moved with the rear wheel & lifed the side stand on the    mover, then it can be moved & parked easily & exactly * Non-slip Aluminum plate surface for safe use * Suitable for almost all models with a side stand Especially heavy duty motorcycle   ...

Hydraulic foot pedal allows hands free operation without bending over. Front wheel clamp helps positioning & securing motorcycle lifts. Safety bar is used for preventing from accidental falling. Adjustable foot is for increasing more stability. Has a removable rear loading ramp. Platform

Size: 200cm x 60cm

...

You have washed & polished your classic car ready for the show at the weekend, but by the time it is in position it's covered with dust & finger marks again. Now is the perfect time to bring out Nenette! Nenette soft mop is impregnated with a liquid called Nenetol, which enables it to absorb surface dirt & dust & leave a highly polished surface. After several uses the mop can easily be cleaned & re-impregnated. Apply to your Nenette Brush & simply wipe over your car, boat, caravan, furniture & all other hard surfaces for a superb clean & polish job. Extra Nenetol Fluid is also available. Instruction:
- The accumulation of dust in the cotton fringe does not detract from the effectiveness of the Nenette. It can be used as long as the fringe remains impregnated with liquid polish. When it has become dry it is recommended to wash it & re-soak with Nenetol liquid.
- Remove the sleeve from the handle.
- Wash the cotton fringe – Pre-soak for a few hours is if the fringe is very dirty.
- Dry the sleeve & fringe completely.
- Replace the sleeve onto the handle.
- Pour the contents of a Nenetol bottle into a flat container.
- Place the Nenette into the flat container so that the fringe soaks up as much liquid as possible.  Move it around to ensure an even coverage.
- Remove the Nenette from the flat container & place in the metal storage tube for a few hours before using again to completely disseminate the Nenetol liquid.







...

You have washed & polished your classic car ready for the show at the weekend, but by the time it is in position it's covered with dust & finger marks again. Now is the perfect time to bring out Nenette! Nenette soft mop is impregnated with a liquid called Nenetol, which enables it to absorb surface dirt & dust & leave a highly polished surface. After several uses the mop can easily be cleaned & re-impregnated. Apply to your Nenette Brush & simply wipe over your car, boat, caravan, furniture & all other hard surfaces for a superb clean & polish job. Instruction:
- The accumulation of dust in the cotton fringe does not detract from the effectiveness of the Nenette. It can be used as long as the fringe remains impregnated with liquid polish. When it has become dry it is recommended to wash it & re-soak with Nenetol liquid.
- Remove the sleeve from the handle.
- Wash the cotton fringe – Pre-soak for a few hours is if the fringe is very dirty.
- Dry the sleeve & fringe completely.
- Replace the sleeve onto the handle.
- Pour the contents of a Nenetol bottle into a flat container.
- Place the Nenette into the flat container so that the fringe soaks up as much liquid as possible.  Move it around to ensure an even coverage.
- Remove the Nenette from the flat container & place in the metal storage tube for a few hours before using again to completely disseminate the Nenetol liquid.







...

Our range of quality engine Enamels are heat & oil resistant to give long lasting British engine colours. To be brushed on. If spraying, thin up to 10% with White Spirit Colours available:   Aluminium, Black, BMC Green, Ford Dark Blue, Landrover Blue (Duck Egg Blue/ Light Green), Ford Green, Ford Red, Gold, Metallic Green, MG Maroon, Pale Blue, Pastel Green, Yellow, Jaguar Semi Gloss Black ...

Using a bossing mallet on a sandbag is the ideal way to beat & shape metal panels. The sandbag is made with suede top cowhide, all-leather construction with double-stitched seams. Supplied unfilled, but the hook-&-loop closure makes it easy to fill with dry silver s&, using a funnel. ...

A great combination of body panel working tools for precision metal forming! Using a bossing mallet on a sandbag is the ideal way to beat & shape metal panels to the shape required. Kit
Includes::
- Our Popular Bossing Mallet
- Nicely balanced with an eleven inch handle. Less heavy than our lignum vitae mallet, but same teardrop shape.
- 18-inch dia. Leather Sandbag
- Made with suede top cowhide, all-leather construction with double-stitched seams. Supplied unfilled, but the hook-&-loop closure makes it easy to fill with dry silver s&, using a funnel.




...