More From Contributor

£6.98
Easy to use with excellent coverage, the Frost Grey Primer Aerosol is a fast drying acrylic paint designed for use on a range of metals prior to top coating. Use as a base coat for the Frost Extreme Chassis Black Aerosol. Aerosol, 500ml. ...
Archived Product
£9.99
Extreme Heat Gloss Black can withstand temperatures of up to 650°C. Ensure surface is clean & free of any rust, paint or other extraneous or loosely adhering matter. Recommended methods include wire brushing, grit blasting or abrasive cloth/paper, followed by wiping with a suitable degreaser. No primer is required. Shake the can thoroughly for at least two minutes & spray a light mist coat from a distance of 15cm – 30cm, allow to dry for 15-30 minutes depending on surrounding temperature & apply a further coat giving full coverage. Allow to dry. ...
Archived Product
£9.99
Extreme Heat Gloss Black can withstand temperatures of up to 650°C. Ensure surface is clean & free of any rust, paint or other extraneous or loosely adhering matter. Recommended methods include wire brushing, grit blasting or abrasive cloth/paper, followed by wiping with a suitable degreaser. No primer is required. Shake the can thoroughly for at least two minutes & spray a light mist coat from a distance of 15cm – 30cm, allow to dry for 15-30 minutes depending on surrounding temperature & apply a further coat giving full coverage. Allow to dry. ...
Archived Product
£16.49
High-Temp Frost Contact Adhesive specifically designed for trim & bonding sound deadening materials. With good heat resistance, it is easily applied by brush. It will bond leather, cloth & fabrics to hardboard, primed & painted metal. Application. Ensure surfaces are clean dry & free from dust & grease. Apply with a stiff brush, coating both surfaces allow to become tacky (5
- 20 mins). Position the parts correctly & apply maximum pressure. Use a roller on flat surfaces. Max temp 120c Also available in normal form (no high heat)
- Code U190.

...
Archived Product
£5.99
Industrial Grade Acetone (500ml) Acetone is the standard of the industry for cleaning tools & brushes while working in polyester, vinyl ester, & epoxy resins. It is also the recommended solvent for removing greases & waxes from surfaces which are to be bonded, repaired or primed. Uses: General GRP Work Cleaning fibreglass resins (Uncured) Heavy duty degreaser Also helps remove fluids & residues from glass & metals. ...
Archived Product
£19.99
Hotcoat Powder Coating (1 lb) for Hot Coat Powder Coating Gun. Powder coating means that you can coat & cure metal parts in less than an hour, & provides an extremely durable finish that is dent & chip resistant. It’s far superior to liquid coatings, it’s easy to apply with no drips or overspray, & contains no environmentally harmful solvents. Also available: Eastwood Hot Coat Powder Coating Colour Sample Kit Eastwood Extreme Chrome Bonded Hotcoat Powder Coating (8oz) 3 Steps: Strip & Clean your metal part before coating Coat the entire part – you can’t overcoat Cure your part in an electrical oven for about 20 minutes

Features:
• Professional results • Quick colour changes • Durable finish • Easy set-up, easy to use, & easy to clean-up • Excellent fluidization of powders • Economical Get professional results with this innovative powder coating system at home. It is much more durable than coating with paint & does not flake when hit or bent. Depressing the activation switch energizes the Powdercoat gun, charging the powder. Move the gun in slightly different angles to ensure that all areas of the part are covered. The coated surface will have a dull opaque coating. Make sure all areas of the part are coated evenly. Place in the oven & bake for 15 minutes. Easy set-up, easy to use, & easy to clean. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor), mains electric supply & a dedicated electric oven. Colours Available: Blue- Jet Black
- Orange
- Brown
- Yellow
- Green
- Bright Red
- Silver
- White
- Graphite Black (NOTE: Exact colours are difficult to show, due to display settings) RAL Numbers: Blue-5012, Bright Red-3001, Brown-8011, Graphite Black-9011, Green-6018, Jet Black- 9005, Orange-2009, Silver 9006, White 9016, Yellow 1021









...
Archived Product
£25
Our range of quality engine Enamels are heat & oil resistant to give long lasting British engine colours. To be brushed on. If spraying, thin up to 10% with White Spirit Colours available:   Aluminium, Black, BMC Green, Ford Dark Blue, Landrover Blue (Duck Egg Blue/ Light Green), Ford Green, Ford Red, Gold, Metallic Green, MG Maroon, Pale Blue, Pastel Green, Yellow, Jaguar Semi Gloss Black ...
Archived Product
£39.99
Using a bossing mallet on a sandbag is the ideal way to beat & shape metal panels. The sandbag is made with suede top cowhide, all-leather construction with double-stitched seams. Supplied unfilled, but the hook-&-loop closure makes it easy to fill with dry silver s&, using a funnel. ...
Archived Product
£275
Features at a glance: Foot Pedal Filter/ Regulator. Hammer Head 3 Dies (32 mm diameter, 1", 2" & 3" radius)- Throat 498mm (19") Max Thickness: 1.2mm Head Opening: 100m Air requirement: 50-100 PSI Air Consumption: 4CFM 710 mm length, 400 mm width, 1200 mm height. Weight 26 kilos ...
Archived Product
£45.99
Remove dirt, grease & silicones from vinyl or leather surfaces with Interior clean. Paint or lacquer with Interior Prep. The unique coating actually penetrates the surface & changes the pigmentation. When finished the grain of vinyl or leather is intact, it does not crack or peel. Afterwards, leather can be fed with hide food & will retain its natural aroma. Preparation is simple:
- Clean the interior by removing dirt, grease & silicones with Vinyl Kleen.
- Dampen a clean, soft, lint free cloth with Vinyl Prep & wipe over the surface to be treated to remove all traces of any other previously applied products which might impair the bonding of the liquid plastic. This should leave the surface slightly tacky. Do not touch the surface again at the stage as it may become contaminated again.
- If treating semi-rigid, polythene & polypropylene plastics it is essential to use Adhesionaid before applying Liquid Plastic. Allow Vinyl Prep to dry before spraying. Shake the can thoroughly & apply a thin coat of Adhesion aid. Allow Adhesionaid to dry (12 minutes at 20 degree C) before applying Liquid Plastic.
- Spray Frost Liquid Plastic for permanent, colourfast & weatherproof transformation. Check a small test area first before applying. After 15 minutes test by placing sticky tape on applied area. Upon removal there should be no liquid Plastic on tape. Apply in mist coats only, allowing 5-10 minutes flash off time between coats. Depending on the original colour between 2 & 3 evenly applied coats should cover the substrate. Do no attempt to cover in one coat or apply in thick coats. Liquid Plastic can be handled after 10-15 minutes & fully cures in 16-20 hours depending on the ambient temperature & humidity. Heat will reduce the drying times. High humidity or damp conditions can lead to poor adhesion and/or a blooming effect.



...
Archived Product

Frost Isolator Primer Aerosol (500ml)

Surface Preparation The surface must be free from all contamination including rust, grease and moisture. Before use, carefully read and note the warning text on the label Application Spray from a distance of approx. 20 cm several thin cross-coats. To achieve sufficient protection, apply at least 3 cross-coats. Product Type High-Grade Resin Coverage 0.75 - 1m² per 500ml Drying times* Dust Free 10-15 minutes Touch Dry 30 minutes Overcoat able after 3 hours apply the first paint layer in a light coat *The drying time depends on temperature, humidity and the thickness of the applied coat.
RIP - This product is no longer available on our network. It was last seen on 12.11.2023

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Frost
  • SKU: P278_11627
Availability: In Stock
£13.99

Product Description

Surface Preparation The surface must be free from all contamination including rust, grease & moisture. Before use, carefully read & note the warning text on the label Application Spray from a distance of approx. 20 cm several thin cross-coats. To achieve sufficient protection, apply at least 3 cross-coats. Product Type High-Grade Resin Coverage 0.75
- 1m² per 500ml Drying times* Dust Free 10-15 minutes Touch Dry 30 minutes Overcoat able after 3 hours apply the first paint layer in a light coat * The drying time depends on temperature, humidity & the thickness of the applied coat.

Reviews/Comments

Add New

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Dry - A term used to describe an item with has little or no water present
Dry - A term used in wine making to describe the lack of sugar (sweetness)
Cm - Centimetres, one centimetre is equal to 10 milimetres
Dust - A general term used for micro particles in the atmosphere
Layer - Adding extra quantities of materials for extra practical benefits, e.g. warmth.

Supplier Information

Frost
Explore automotive excellence at Frost. Unleash your vehicle's potential with a vast selection of high-quality automotive tools, paints, and restoration supplies. Whether you're a DIY enthusiast or professional, find everything from specialized tools to performance-enhancing additives. Discover a comprehensive range of car care products, welding equipment, and custom paint solutions. With decades of expertise, Frost is a trusted resource for automotive restoration and customization. Navigate our user-friendly platform for a seamless shopping experience. Elevate your automotive projects with Frost's commitment to quality, innovation, and exceptional customer service. Drive your passion with the tools and supplies you need, available at your fingertips.
Page Updated: 2024-02-26 14:21:52

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu