Frost Multilube Aerosol conveniently lubricate locks, hinges, bonnet catches, cables & much more with our specially formulated lube. (500ml can). ...

You have washed & polished your classic car ready for the show at the weekend, but by the time it is in position it's covered with dust & finger marks again. Now is the perfect time to bring out Nenette! Nenette soft mop is impregnated with a liquid called Nenetol, which enables it to absorb surface dirt & dust & leave a highly polished surface. After several uses the mop can easily be cleaned & re-impregnated. Apply to your Nenette Brush & simply wipe over your car, boat, caravan, furniture & all other hard surfaces for a superb clean & polish job. Extra Nenetol Fluid is also available. Instruction:
- The accumulation of dust in the cotton fringe does not detract from the effectiveness of the Nenette. It can be used as long as the fringe remains impregnated with liquid polish. When it has become dry it is recommended to wash it & re-soak with Nenetol liquid.
- Remove the sleeve from the handle.
- Wash the cotton fringe – Pre-soak for a few hours is if the fringe is very dirty.
- Dry the sleeve & fringe completely.
- Replace the sleeve onto the handle.
- Pour the contents of a Nenetol bottle into a flat container.
- Place the Nenette into the flat container so that the fringe soaks up as much liquid as possible.  Move it around to ensure an even coverage.
- Remove the Nenette from the flat container & place in the metal storage tube for a few hours before using again to completely disseminate the Nenetol liquid.







...

You have washed & polished your classic car ready for the show at the weekend, but by the time it is in position it's covered with dust & finger marks again. Now is the perfect time to bring out Nenette! Nenette soft mop is impregnated with a liquid called Nenetol, which enables it to absorb surface dirt & dust & leave a highly polished surface. After several uses the mop can easily be cleaned & re-impregnated. Apply to your Nenette Brush & simply wipe over your car, boat, caravan, furniture & all other hard surfaces for a superb clean & polish job. Instruction:
- The accumulation of dust in the cotton fringe does not detract from the effectiveness of the Nenette. It can be used as long as the fringe remains impregnated with liquid polish. When it has become dry it is recommended to wash it & re-soak with Nenetol liquid.
- Remove the sleeve from the handle.
- Wash the cotton fringe – Pre-soak for a few hours is if the fringe is very dirty.
- Dry the sleeve & fringe completely.
- Replace the sleeve onto the handle.
- Pour the contents of a Nenetol bottle into a flat container.
- Place the Nenette into the flat container so that the fringe soaks up as much liquid as possible.  Move it around to ensure an even coverage.
- Remove the Nenette from the flat container & place in the metal storage tube for a few hours before using again to completely disseminate the Nenetol liquid.







...

Our range of quality engine Enamels are heat & oil resistant to give long lasting British engine colours. To be brushed on. If spraying, thin up to 10% with White Spirit Colours available:   Aluminium, Black, BMC Green, Ford Dark Blue, Landrover Blue (Duck Egg Blue/ Light Green), Ford Green, Ford Red, Gold, Metallic Green, MG Maroon, Pale Blue, Pastel Green, Yellow, Jaguar Semi Gloss Black ...

Using a bossing mallet on a sandbag is the ideal way to beat & shape metal panels. The sandbag is made with suede top cowhide, all-leather construction with double-stitched seams. Supplied unfilled, but the hook-&-loop closure makes it easy to fill with dry silver s&, using a funnel. ...

Formulated to remove impurities, yet be safe on the surface to be painted. Frost Panel Cleaner Spray effectively removes wax, silicone, grease & dirt while ensuring excellent paint adhesion. Ideal for paint & powder coating preparation. Direction 1. Test a small area to make sure Panel Cleaner is compatible with the surface to be cleaned. It may damage uncured paints & may damage some plastics. 2. Wet a clean cloth with Panel Cleaner or spray directly onto the surface to be cleaned. 3. Wipe surface with clean cloth to remove debris. Do not reuse dirty ...

Effectively removes wax, silicone, grease & dirt. ...

Surface Preparation Abrade & clean surfaces thoroughly prior to coating. The surface must be free from all contamination including grease & moisture. Before use, carefully read & note the warning text on the label. Product Type Nitro Combi Coverage 1.56
- 2.19m² per 500ml Drying times Dust Free 5
- 10minutes Touch Dry 10
- 20 minutes Sandable 15 minutes Overcoat ready 15 –30 minutes * The drying time depends on temperature, humidity & the thickness of the applied coa t.


...

Every day quality bossing mallet, nicely balanced with an eleven inch handle. Less heavy than our lignum vitae mallet, but same shape. ...

Features at a glance: Hydraulic hand pump unit powers 1000kg capacity ram & yoke assembly Up to 50% quicker than using other ratchet driven spring compressors Equipped with two pairs of spring yokes Suitable for springs from 80mm ID to 165mm OD Net Weight: 22kg Maximum Extension: 270mm Piston Travel: 240mm Yoke Specification:

Size: Capacity (Spring Diameter): Small: ID80-OD122mm Large: ID110-OD165mm  

...