Key Features & Benefits Add DSL connectivity to any Router Ideal Partner device for Dray Tek dual-WAN products or any other vendors Ethernet WAN firewall. Reports DSL Line Status on Dray Tek Vigor routers. Benefits: Connect any Router or Firewall to VDSL & ADSL Two Gigabit LAN Ports Connect two devices to the Vigor 167 with 2 Gigabit (10/100/1000 Mbps) LAN ports. Implement High Availability more easily & manage the modem conveniently. Benefits: More convenient setup & remote management. No Setup Needed Works as a modem with most ISPs, straight out of the box. Pre-Configured to work with most UK ISPs. Just set the username & password on your router. Benefits: Quick & easy to install. Wall or Shelf Mountable Can be installed securely on a wall or shelf with screw fixings to hold it in place. Mounting kit included. Benefits: Convenient & tidy installation. Vigor 167
- VDSL2 35b & ADSL2+ Modem The Vigor 167 is VDSL2 35b & ADSL2+ modem to Ethernet bridge, connecting VDSL or ADSL to your Ethernet-based Router or Firewall. It provides proven compatibility with UK VDSL2 & ADSL2+ networks. Dray Teks Vigor 167 is an ideal modem to connect your Dray Tek Vigor router, or any Router & Firewall, to a DSL line.
...

Vigor 2130 Series Router/ Firewall The Dray Tek Vigor 2130 Series routers are intended for the new generation of very-high speed, Ethernet-connected broadband services, such as connection to broadband modems from Virginmedia or BTs Infinity modem* (VDSL/FTTC). It is an ideal router firewall for So Ho users wanting very high speed access with control & a wealth of other usability features. Your PCs, consoles or other devices can plug into the 4-Port gigabit switch & the Wireless versions can provide Wi Fi access to your laptops, tablet computers, mobile phones or any other device which can access the internet over Wi Fi Up to 500 Mb/s WAN Throughput
- ideal for ultra high-speed Internet services Gigabit Ethernet WAN Port 4-Port Gigabit Ethernet Switch Bandwidth/session control (prevent specific PCs from using too much) Web URL Blocking (block access to specific sites) Optional web content filtering by category (Globalview) Username/ Password controlled access Support for IPv 6 Networks Support for 15, 000 simultaneous NAT sessions 802.11n Wi Fi (V2130n/ Vn only) Twin Vo IP Phone ports (V2130 Vn only)
...

The Vigor 2762 is an ADSL/VDSL2, Ethernet or 3G/4G router, thats ideal for your small office or home business/office. It provides connectivity to your PCs or other Internet-connected devices (laptops, tablets, games consoles, smartphones) via its 4 built-in Gigabit Ethernet ports, or using Wireless LAN (on n & ac models). The firewall helps protect your network from external threats, as well as the Vigor 2762s built-in Content Filtering which gives you control over what & when your local users can access or download. The Vigor 2762 series can alternatively connect to an Ethernet Internet connection, such as a cable/fiber modem (e.g. Virgin Media) instead of connecting to a ADSL/VDSL line. Compatible 3G & 4G (LTE) modems can also optionally be added to the USB (Universal Serial Bus) port to provide backup or main Internet connectivity without any fixed line. The Dray Tek Vigor 2762ac adds 802.11ac Dual-Band Wireless to your network, with up to 866 Mbps on the 5 G Hz 11ac b&, & up to 300 Mbps on the 2.4 G Hz b&, allowing devices access to the Internet from around the property. The Vigor 2762ac operates simultaneiously in both the 2.4 Ghz & less congested 5 Ghz band so your devices can connect to either, with Band Steering to ensure that each wireless device connecting is guided to its most suitable wireless b&. The Vigor 2762 Vac variant integrates a Vo IP ATA (Analogue Telephone Adapter), which provides two analogue phone ports to provide Vo IP integration via the Internet (Vo IP). You can connect 1 or 2 regular telephones, which can be used independently & simultaneously for both incoming & outgoing calls. An Ideal firewall router for Fibre Broadband Many broadband connections offered by ISPs are referred to as Fibre Broadb&, although technically in many cases theyre actually VDSL based connections which run over your phone line. The phone lines twisted pair telephone cable runs from the premise to a street cabinet (these are typically 4ft green boxes with a Openreach logo on) which contain a VDSL MSAN (multi-service access node) that connects to fibre infrastructure which runs to the local exchange & then on to the ISPs core network. The Vigor 2762s built-in DSL interface (WAN1) is ideal for connecting this type of VDSL based connection. Cable Modem & Ethernet WAN Compatible As well as being able to connect to ADSL/VDSL lines directly through the Vigor 2762s RJ11 DSL socket, the Vigor 2762 series can instead connect to Ethernet-fed Internet connections, such as that provided by cable modems (e.g. Virgin Media). When Ethernet WAN is enabled, LAN Port 4 switches to become your WAN port into which you can connect to your cable modem or other Ethernet feed. The other 3 Gigabit LAN ports (1-3) remain available for normal LAN connectivity. Note, you cannot have Ethernet WAN & ADSL/VDSL enabled at the same time; if Ethernet WAN is enabled, the ADSL/VDSL port is disabled (and vice versa). The photo on the right shows the Vigor 2762 connected to a fiber modem using the Ethernet WAN Port. IPv 6
- Next Generation Internet Routing The Vigor 2762 supports IPv 6
- the successor to the current IPv 4 addressing system that has been used since the Internet was first created. IPv 4 address space is full up & IPv 6 allows for much more efficient routing & a larger address space. IPv 6 is supported directly from your own ISP, but if your ISP does not (yet) support IPv 6, the Vigor 2762 also supports IPv 6 broker/tunnel services to provide IPv 6 access using either TSPC or AICCU via 3rd party IPv 6 providers. The advanced networking features of the Vigor 2762, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.

...

The Vigor 2762 is an ADSL/VDSL2, Ethernet or 3G/4G router, thats ideal for your small office or home business/office. It provides connectivity to your PCs or other Internet-connected devices (laptops, tablets, games consoles, smartphones) via its 4 built-in Gigabit Ethernet ports, or using Wireless LAN (on n & ac models). The firewall helps protect your network from external threats, as well as the Vigor 2762s built-in Content Filtering which gives you control over what & when your local users can access or download. The Vigor 2762 series can alternatively connect to an Ethernet Internet connection, such as a cable/fiber modem (e.g. Virgin Media) instead of connecting to a ADSL/VDSL line. Compatible 3G & 4G (LTE) modems can also optionally be added to the USB (Universal Serial Bus) port to provide backup or main Internet connectivity without any fixed line. The Dray Tek Vigor 2762ac adds 802.11ac Dual-Band Wireless to your network, with up to 866 Mbps on the 5 G Hz 11ac b&, & up to 300 Mbps on the 2.4 G Hz b&, allowing devices access to the Internet from around the property. The Vigor 2762ac operates simultaneiously in both the 2.4 Ghz & less congested 5 Ghz band so your devices can connect to either, with Band Steering to ensure that each wireless device connecting is guided to its most suitable wireless b&. The Vigor 2762 Vac variant integrates a Vo IP ATA (Analogue Telephone Adapter), which provides two analogue phone ports to provide Vo IP integration via the Internet (Vo IP). You can connect 1 or 2 regular telephones, which can be used independently & simultaneously for both incoming & outgoing calls. An Ideal firewall router for Fibre Broadband Many broadband connections offered by ISPs are referred to as Fibre Broadb&, although technically in many cases theyre actually VDSL based connections which run over your phone line. The phone lines twisted pair telephone cable runs from the premise to a street cabinet (these are typically 4ft green boxes with a Openreach logo on) which contain a VDSL MSAN (multi-service access node) that connects to fibre infrastructure which runs to the local exchange & then on to the ISPs core network. The Vigor 2762s built-in DSL interface (WAN1) is ideal for connecting this type of VDSL based connection. Cable Modem & Ethernet WAN Compatible As well as being able to connect to ADSL/VDSL lines directly through the Vigor 2762s RJ11 DSL socket, the Vigor 2762 series can instead connect to Ethernet-fed Internet connections, such as that provided by cable modems (e.g. Virgin Media). When Ethernet WAN is enabled, LAN Port 4 switches to become your WAN port into which you can connect to your cable modem or other Ethernet feed. The other 3 Gigabit LAN ports (1-3) remain available for normal LAN connectivity. Note, you cannot have Ethernet WAN & ADSL/VDSL enabled at the same time; if Ethernet WAN is enabled, the ADSL/VDSL port is disabled (and vice versa). The photo on the right shows the Vigor 2762 connected to a fiber modem using the Ethernet WAN Port. IPv 6
- Next Generation Internet Routing The Vigor 2762 supports IPv 6
- the successor to the current IPv 4 addressing system that has been used since the Internet was first created. IPv 4 address space is full up & IPv 6 allows for much more efficient routing & a larger address space. IPv 6 is supported directly from your own ISP, but if your ISP does not (yet) support IPv 6, the Vigor 2762 also supports IPv 6 broker/tunnel services to provide IPv 6 access using either TSPC or AICCU via 3rd party IPv 6 providers. The advanced networking features of the Vigor 2762, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.

...

The Vigor 2762 is an ADSL/VDSL2, Ethernet or 3G/4G router, thats ideal for your small office or home business/office. It provides connectivity to your PCs or other Internet-connected devices (laptops, tablets, games consoles, smartphones) via its 4 built-in Gigabit Ethernet ports, or using Wireless LAN (on n & ac models). The firewall helps protect your network from external threats, as well as the Vigor 2762s built-in Content Filtering which gives you control over what & when your local users can access or download. The Vigor 2762 series can alternatively connect to an Ethernet Internet connection, such as a cable/fiber modem (e.g. Virgin Media) instead of connecting to a ADSL/VDSL line. Compatible 3G & 4G (LTE) modems can also optionally be added to the USB (Universal Serial Bus) port to provide backup or main Internet connectivity without any fixed line. The Dray Tek Vigor 2762ac adds 802.11ac Dual-Band Wireless to your network, with up to 866 Mbps on the 5 G Hz 11ac b&, & up to 300 Mbps on the 2.4 G Hz b&, allowing devices access to the Internet from around the property. The Vigor 2762ac operates simultaneiously in both the 2.4 Ghz & less congested 5 Ghz band so your devices can connect to either, with Band Steering to ensure that each wireless device connecting is guided to its most suitable wireless b&. The Vigor 2762 Vac variant integrates a Vo IP ATA (Analogue Telephone Adapter), which provides two analogue phone ports to provide Vo IP integration via the Internet (Vo IP). You can connect 1 or 2 regular telephones, which can be used independently & simultaneously for both incoming & outgoing calls. An Ideal firewall router for Fibre Broadband Many broadband connections offered by ISPs are referred to as Fibre Broadb&, although technically in many cases theyre actually VDSL based connections which run over your phone line. The phone lines twisted pair telephone cable runs from the premise to a street cabinet (these are typically 4ft green boxes with a Openreach logo on) which contain a VDSL MSAN (multi-service access node) that connects to fibre infrastructure which runs to the local exchange & then on to the ISPs core network. The Vigor 2762s built-in DSL interface (WAN1) is ideal for connecting this type of VDSL based connection. Cable Modem & Ethernet WAN Compatible As well as being able to connect to ADSL/VDSL lines directly through the Vigor 2762s RJ11 DSL socket, the Vigor 2762 series can instead connect to Ethernet-fed Internet connections, such as that provided by cable modems (e.g. Virgin Media). When Ethernet WAN is enabled, LAN Port 4 switches to become your WAN port into which you can connect to your cable modem or other Ethernet feed. The other 3 Gigabit LAN ports (1-3) remain available for normal LAN connectivity. Note, you cannot have Ethernet WAN & ADSL/VDSL enabled at the same time; if Ethernet WAN is enabled, the ADSL/VDSL port is disabled (and vice versa). The photo on the right shows the Vigor 2762 connected to a fiber modem using the Ethernet WAN Port. IPv 6
- Next Generation Internet Routing The Vigor 2762 supports IPv 6
- the successor to the current IPv 4 addressing system that has been used since the Internet was first created. IPv 4 address space is full up & IPv 6 allows for much more efficient routing & a larger address space. IPv 6 is supported directly from your own ISP, but if your ISP does not (yet) support IPv 6, the Vigor 2762 also supports IPv 6 broker/tunnel services to provide IPv 6 access using either TSPC or AICCU via 3rd party IPv 6 providers. The advanced networking features of the Vigor 2762, such as the object-based Firewall, Quality of Service, Content Filtering & VLANs support both IPv 4 & IPv 6 networks.

...

The Dray Tek Vigor 2763 series VDSL & Ethernet VPN routers are ideal for Small Office & Home Office networks. Featuring powerful Firewall & Content Filtering, configurable Quality of Service & an array of VPN capabilities, with the performance to make full use of FTTP Fibre Broadb&. The Vigor 2763 is a VDSL or Ethernet WAN router with Gigabit performance, allowing you to make full use of Dray Teks advanced feature set, with Quality of Service, VPN & Content Filtering. Connect the Vigor 2763 to Superfast Fibre with its integrated VDSL modem. Or connect to Virgin Media Cable & Ultrafast FTTP with Ethernet WAN. Either connection, or a 4G USB (Universal Serial Bus) modem can be used as the primary or Failover connections, so that if the main Internet connection goes down, the Vigor 2763 can use its backup connections to guarantee reliable Internet access & VPN connectivity. The Vigor 2763 series can be centrally managed along with Vigor A Ps & switches, with the Vigor ACS central management platform. This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers devices or any user who wants to know whats going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues. Dray Tek V2763 Wired Router Key Highlights VDSL2 (Superfast Fibre) or Gigabit Ethernet WAN Router with Failover Up to 950 Mbps Firewall Throughput for Ethernet WAN 4 x Gigabit LAN Ports 4 x LAN Subnets with VLANs (Port-based / 802.1q) SPI Firewall & Content Filtering Up to 200 Mbps IPsec VPN Throughput 2 LAN-to-LAN or Remote Teleworker VPN Tunnels Dray Tek SSL VPN & Open VPN support Optional Vigor Care Available Can be centrally Managed by Vigor ACS Whats in the Box? Dray Tek Vigor 2763 Router Screws & wall plugs for wall mounting 2m Cat-5e RJ-45 Network Cable Power adapter Quick start guide ...

The Dray Tek Vigor 2763 series VDSL & Ethernet VPN routers are ideal for Small Office & Home Office networks. Featuring powerful Firewall & Content Filtering, configurable Quality of Service & an array of VPN capabilities, with the performance to make full use of FTTP Fibre Broadb&. Incorporating Wireless in the V2763AC-K, the Vigor 2763 series provides a reliable, highly integrated & reliable connectivity solution for So Ho networks. The Vigor 2763 series can be centrally managed along with Vigor A Ps & switches, with the Vigor ACS central management platform. This scalable solution provides visibility, control & reporting of your entire Dray Tek product estate, ideal for dealers/SIs managing customers devices or any user who wants to know whats going on with their devices. Vigor ACS also provides features like automated/bulk firmware updates, VPN management & alarms for connectivity or other issues. Dray Tek V2763AC Router Key Highlights VDSL2 (Superfast Fibre) or Gigabit Ethernet WAN Router with Failover Up to 950 Mbps Firewall Throughput for Ethernet WAN 4 x Gigabit LAN Ports AC1300
- 11ac Wave 2 Dual Band Wireless (‘ac’ models) 4 x LAN Subnets with VLANs (Port-based / 802.1q) SPI Firewall & Content Filtering Up to 200 Mbps IPsec VPN Throughput 2 LAN-to-LAN or Remote Teleworker VPN Tunnels Dray Tek SSL VPN & Open VPN support Optional Vigor Care Available Can be centrally Managed by Vigor ACS Whats in the Box? Dray Tek Vigor 2763 Router Screws & wall plugs for wall mounting 2 x Detachable Wireless LAN Antennas (‘ac’ models) 1 x 2m Cat-5e RJ-45 Network Cable Power adapter Quick start guide
...

VDSL & Ethernet Router 4 Gigabit LAN Ports with VLANs Robust & Comprehensive IPv 4 / IPv 6 Firewall Multi-Purpose USB (Universal Serial Bus) Ports The Dray Tek Vigor 2765 series VDSL & Ethernet VPN routers are ideal for Small Office & Home Office networks. Featuring powerful Firewall & Content Filtering, configurable Quality of Service & an array of VPN capabilities, with the performance to make full use of FTTP Fibre Broadb&. Incorporating Wireless & Vo IP features in ‘2765ac’ & ‘2765 Vac’ models, the Vigor 2765 series provide a reliable, highly integrated & reliable network solution for So Ho environments. ...

VDSL & Ethernet Router AC1300 Wireless LAN with Mesh 4 Gigabit LAN Ports with VLANs Robust & Comprehensive IPv 4 / IPv 6 Firewall Multi-Purpose USB (Universal Serial Bus) Ports The Dray Tek Vigor 2765 series VDSL & Ethernet VPN routers are ideal for Small Office & Home Office networks. Featuring powerful Firewall & Content Filtering, configurable Quality of Service & an array of VPN capabilities, with the performance to make full use of FTTP Fibre Broadb&. Incorporating Wireless & Vo IP features in ‘2765ac’ & ‘2765 Vac’ models, the Vigor 2765 series provide a reliable, highly integrated & reliable network solution for So Ho environments. ...

The Vigor 2766 series is Dray Tek’s G. Fast / VDSL & Ethernet router that is ideal for Small Office & Home Office networks. Featuring powerful Firewall & Content Filtering, configurable Quality of Service & an array of VPN capabilities, with the performance to make full use of FTTP Fibre Broadb&. Incorporating Wireless & Vo IP features in ‘2766ac', the Vigor 2766 series provide a reliable, highly integrated & reliable network solution for So Ho environments. ...