As a leading provider of network equipment for SMBs, NETGEAR&174; understands the importance of reliable & high performance networks. With the growth of virtualization, cloud-based services & applications like Vo IP, video streaming & IP surveillance, SMB networks need to extend beyond simple reliability to higher speed & performance. The 10-Gigabit & Multi-Gigabit Smart Managed Plus Switches from NETGEAR present the right solution for this requirement; delivering unprecedented non-blocking 10-Gigabit bandwidth at the most affordable cost. All of them are perfect for removing the SMB network bottlenecks caused by the proliferation of Gigabit-to-the-desktop & the upcoming 10-Gigabit/ Multi-Gigabit high end workstations. \n\n Configurable L2 Networking Features\n The 10G Web Managed (Plus) Switches provide plug-&-play connectivity, in addition to configurable L2 network features in order to meet current & future needs on virtualization, converged networking & mobility. Some of the main features include:\n Advanced VLAN support for traffic segmentation including port-based & 802.1Q-based\n Advanced Qo S (Quality of Service) for traffic prioritization including port-based & 802.1p/DSCP-based\n Auto &156;denial-of-service&157; (Do S) prevention\n IGMP snooping support for multicast optimization\n Loop detection & broadcast storm controls\n Rate limiting & priority queuing for better bandwidth allocation\n Port mirroring for network monitoring\n Port trunking/link aggregation (LAG) allows for increased throughput beyond 10G or to provide redundancy across the link (s)\n Jumbo frame support\n\n 5-Speed Networking\n The all new GS110EMX, XS512EM & XS724EM comes with the revolutionary 5-speed Multi-Gigabit technology built in the NETGEAR multi-speed switches allows your devices to speed past the Gigabit barrier.\n The ports automatically detects which speed is needed by the connected device & provides the adequate speed. Moreover the Multi-speed switch ports can be connected with regular Cat 5E Ethernet cables, without the need to upgrade to Cat 6 wiring, therefore reducing wiring costs & hassle.\n\n 10-Gigabit Transition with BASE-T\n With 10GBASE-T support, the 10G Web Managed (Plus) Switches enable a standard RJ45 Ethernet jack & existing Cat 6 or Cat 7 network cables to be used, delivering a 10X increase in network performance with minimum network changes & upgrades.\n 10GBASE-T is backward compatible, auto-negotiating between higher & lower speeds, thereby not forcing an all-at-once network equipment upgrade\n Cat 5/ Cat 5e are supported for Gigabit speeds & Multi-Gigabit (2.5G, 5G) speeds up to 100 meters\n Cat 6 twisted pair copper cabling supports 10-Gigabit speeds up to 45 meters\n Cat 6a or newer Cat 7 cabling will allow for up to 100 meter 10GBASE-T connections\n\n Smart IT, not Big IT\n Easy-to-use web browser-based management GUI makes setup & management simple\n Standards-based technology, ensuring interoperability with any standards-based devices in the existing network\n Worry-free with NETGEAR Pro SAFE LIFETIME Hardware Warranty\n Minimal down-time with NETGEAR Pro SAFE LIFETIME Next-Business-Day (NBD) Replacement Warranty\n Get deployment assistance with 90-days Free 24x 7 Advanced Technical Phone Support\n LIFETIME 24x 7 Online Chat Technical Support Feature Feature Value Switch type Managed Switch layer L2/L3 Quality of Service (Qo S) support Y Web-based management Y Virtual Cable Test (VCT)YBasic switching RJ-45 Ethernet ports quantity 10 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Gigabit Ethernet (copper) ports quantity 8 Power connector DC-in jack Networking standards IEEE 802.1Q, IEEE 802.1p, IEEE 802.3az, IEEE 802.3x 10G support Y Cable types supported Cat 5, Cat 5e, Cat 6, Cat 6a, Cat 7 Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Broadcast storm control Y Rate limiting YVLAN support Y Virtual LAN features Voice VLAN, Tagged VLAN, Port-based VLANNumber of VLANs 64MAC address table 16000 entries Switching capacity 56 Gbit/s Forwarding rate 41.664 Mpps Latency (10-100 Mbps)7 &181;s Latency (1 Gbps)4 &181;s Latency (10 Gbps)3 &181;s Number of queues 8 Jumbo frames support Y Jumbo frames 10240 Packet buffer memory 0.128 MBDHCP features DHCP client IGMP snooping Y Loop protection Y Password protection Y Do S attack prevention Y Queue scheduling algorithms Weighted Round Robin (WRR) Multicast support Y Number of multicast groups filtered 128 Rack mounting Y Product colour Black Housing material Metal LED indicators Link, Power, Speed Wall mountable Y Safety UL/c UL Listed (UL 60950-1)/CAN/CSA C22.2 No. 60960-1-07, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, AS/NZS 60950.1:2015 Electromagnetic compatibility Class BCertification 47 CFR FCC Part 15, Subpart B, Class Bn ICES-003:2016 Issue 6, Class Bn ANSI C63.4:2014n N 55032:2012 +AC:2013 / CISPR 32:2012 / AS/NZS CISPR 32:2013, Class Bn EN 55032:2015 +AC:2016 / CISPR 32:2015 +COR1:2016 / AS/NZS CISPR 32:2015, Class Bn EN 61000-3-2:2014n EN 61000-3-3:2013n EN 55024:2010 +A1:2015 Firmware upgradeable Y Output voltage 12 VOutput current 2.5 APower consumption (typical)6.6 WPower consumption (max)15.6 WPower over Ethernet (Po E)NOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 90% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Non-operating altitude 0
- 3000 m Heat dissipation 53.35 BTU/h Width 236 mm Depth 102 mm Height 27 mm Weight 750 g Quick start guide Y Wall mounting kit YAC adapter included Y Rack mount kit Y Rubber feet Y





...

As a leading provider of network equipment for SMBs, NETGEAR&174; understands the importance of reliable & high performance networks. With the growth of virtualization, cloud-based services & applications like Vo IP, video streaming & IP surveillance, SMB networks need to extend beyond simple reliability to higher speed & performance. The 10-Gigabit & Multi-Gigabit Smart Managed Plus Switches from NETGEAR present the right solution for this requirement; delivering unprecedented non-blocking 10-Gigabit bandwidth at the most affordable cost. All of them are perfect for removing the SMB network bottlenecks caused by the proliferation of Gigabit-to-the-desktop & the upcoming 10-Gigabit/ Multi-Gigabit high end workstations. \n\n Configurable L2 Networking Features\n The 10G Web Managed (Plus) Switches provide plug-&-play connectivity, in addition to configurable L2 network features in order to meet current & future needs on virtualization, converged networking & mobility. Some of the main features include:\n Advanced VLAN support for traffic segmentation including port-based & 802.1Q-based\n Advanced Qo S (Quality of Service) for traffic prioritization including port-based & 802.1p/DSCP-based\n Auto &156;denial-of-service&157; (Do S) prevention\n IGMP snooping support for multicast optimization\n Loop detection & broadcast storm controls\n Rate limiting & priority queuing for better bandwidth allocation\n Port mirroring for network monitoring\n Port trunking/link aggregation (LAG) allows for increased throughput beyond 10G or to provide redundancy across the link (s)\n Jumbo frame support\n\n 5-Speed Networking\n The all new GS110EMX, XS512EM & XS724EM comes with the revolutionary 5-speed Multi-Gigabit technology built in the NETGEAR multi-speed switches allows your devices to speed past the Gigabit barrier.\n The ports automatically detects which speed is needed by the connected device & provides the adequate speed. Moreover the Multi-speed switch ports can be connected with regular Cat 5E Ethernet cables, without the need to upgrade to Cat 6 wiring, therefore reducing wiring costs & hassle.\n\n 10-Gigabit Transition with BASE-T\n With 10GBASE-T support, the 10G Web Managed (Plus) Switches enable a standard RJ45 Ethernet jack & existing Cat 6 or Cat 7 network cables to be used, delivering a 10X increase in network performance with minimum network changes & upgrades.\n 10GBASE-T is backward compatible, auto-negotiating between higher & lower speeds, thereby not forcing an all-at-once network equipment upgrade\n Cat 5/ Cat 5e are supported for Gigabit speeds & Multi-Gigabit (2.5G, 5G) speeds up to 100 meters\n Cat 6 twisted pair copper cabling supports 10-Gigabit speeds up to 45 meters\n Cat 6a or newer Cat 7 cabling will allow for up to 100 meter 10GBASE-T connections\n\n Smart IT, not Big IT\n Easy-to-use web browser-based management GUI makes setup & management simple\n Standards-based technology, ensuring interoperability with any standards-based devices in the existing network\n Worry-free with NETGEAR Pro SAFE LIFETIME Hardware Warranty\n Minimal down-time with NETGEAR Pro SAFE LIFETIME Next-Business-Day (NBD) Replacement Warranty\n Get deployment assistance with 90-days Free 24x 7 Advanced Technical Phone Support\n LIFETIME 24x 7 Online Chat Technical Support Feature Feature Value Switch type Managed Switch layer L2/L3 Quality of Service (Qo S) support Y Web-based management Y Virtual Cable Test (VCT)YBasic switching RJ-45 Ethernet ports quantity 10 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Gigabit Ethernet (copper) ports quantity 8 Power connector DC-in jack Networking standards IEEE 802.1Q, IEEE 802.1p, IEEE 802.3az, IEEE 802.3x 10G support Y Cable types supported Cat 5, Cat 5e, Cat 6, Cat 6a, Cat 7 Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Broadcast storm control Y Rate limiting YVLAN support Y Virtual LAN features Voice VLAN, Tagged VLAN, Port-based VLANNumber of VLANs 64MAC address table 16000 entries Switching capacity 56 Gbit/s Forwarding rate 41.664 Mpps Latency (10-100 Mbps)7 &181;s Latency (1 Gbps)4 &181;s Latency (10 Gbps)3 &181;s Number of queues 8 Jumbo frames support Y Jumbo frames 10240 Packet buffer memory 0.128 MBDHCP features DHCP client IGMP snooping Y Loop protection Y Password protection Y Do S attack prevention Y Queue scheduling algorithms Weighted Round Robin (WRR) Multicast support Y Number of multicast groups filtered 128 Rack mounting Y Product colour Black Housing material Metal LED indicators Link, Power, Speed Wall mountable Y Safety UL/c UL Listed (UL 60950-1)/CAN/CSA C22.2 No. 60960-1-07, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, AS/NZS 60950.1:2015 Electromagnetic compatibility Class BCertification 47 CFR FCC Part 15, Subpart B, Class Bn ICES-003:2016 Issue 6, Class Bn ANSI C63.4:2014n N 55032:2012 +AC:2013 / CISPR 32:2012 / AS/NZS CISPR 32:2013, Class Bn EN 55032:2015 +AC:2016 / CISPR 32:2015 +COR1:2016 / AS/NZS CISPR 32:2015, Class Bn EN 61000-3-2:2014n EN 61000-3-3:2013n EN 55024:2010 +A1:2015 Firmware upgradeable Y Output voltage 12 VOutput current 2.5 APower consumption (typical)6.6 WPower consumption (max)15.6 WPower over Ethernet (Po E)NOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 90% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Non-operating altitude 0
- 3000 m Heat dissipation 53.35 BTU/h Width 236 mm Depth 102 mm Height 27 mm Weight 750 g Quick start guide Y Wall mounting kit YAC adapter included Y Rack mount kit Y Rubber feet Y





...

The GS110EMX & GS110MX come with 8 Gigabit Ethernet ports & 2 uplink 10-Gigabit/ Multi-Gigabit (5-speed) ports that provide either 100 Megabit, 1-Gigabit, 2.5-Gigabit, 5-Gigabit or 10-Gigabit connectivity. \n\n The two uplink ports automatically detects which speed is needed by the connected device & provides the adequate speed. Moreover these two Multi-speed switch ports can be connected with regular Cat 5E Ethernet cables, without the need to upgrade to Cat 6 wiring, therefore reducing wiring costs & hassle.\n\n The GS110MX & GS110EMX offer flexible mounting options
- they can be mounted in a rack, on a wall or can be used as a desktop switch. Moreover the compact & fanless design make the GS110MX & GS110EMX ideal for any home or business environment. Feature Feature Value Switch type Unmanaged Basic switching RJ-45 Ethernet ports quantity 10 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Gigabit Ethernet (copper) ports quantity 8 Power connector DC-in jack Networking standards IEEE 802.1p, IEEE 802.3az, IEEE 802.3x 10G support Y Cable types supported Cat 5, Cat 5e, Cat 6, Cat 6a, Cat 7 Full duplex Y Flow control support YVLAN support NMAC address table 16000 entries Switching capacity 56 Gbit/s Forwarding rate 41.664 Mpps Latency (10-100 Mbps)7 &181;s Latency (1 Gbps)4 &181;s Latency (10 Gbps)3 &181;s Number of queues 8 Jumbo frames support Y Jumbo frames 10240 Packet buffer memory 0.128 MBQueue scheduling algorithms Weighted Round Robin (WRR) Rack mounting Y Product colour Black Housing material Metal LED indicators Link, Power, Speed Wall mountable Y Safety UL/c UL Listed (UL 60950-1)/CAN/CSA C22.2 No. 60960-1-07, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, AS/NZS 60950.1:2015 Electromagnetic compatibility Class BCertification 47 CFR FCC Part 15, Subpart B, Class Bn ICES-003:2016 Issue 6, Class Bn ANSI C63.4:2014n N 55032:2012 +AC:2013 / CISPR 32:2012 / AS/NZS CISPR 32:2013, Class Bn EN 55032:2015 +AC:2016 / CISPR 32:2015 +COR1:2016 / AS/NZS CISPR 32:2015, Class Bn EN 61000-3-2:2014n EN 61000-3-3:2013n EN 55024:2010 +A1:2015 Output voltage 12 VOutput current 1.5 APower consumption (typical)4.8 WPower consumption (max)13.2 WPower over Ethernet (Po E)NOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 90% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Non-operating altitude 0
- 3000 m Heat dissipation 45.14 BTU/h Width 236 mm Depth 102 mm Height 27 mm Weight 740 g Quick start guide Y Wall mounting kit YAC adapter included Y Rack mount kit Y Rubber feet Y






...

The GS110EMX & GS110MX come with 8 Gigabit Ethernet ports & 2 uplink 10-Gigabit/ Multi-Gigabit (5-speed) ports that provide either 100 Megabit, 1-Gigabit, 2.5-Gigabit, 5-Gigabit or 10-Gigabit connectivity. \n\n The two uplink ports automatically detects which speed is needed by the connected device & provides the adequate speed. Moreover these two Multi-speed switch ports can be connected with regular Cat 5E Ethernet cables, without the need to upgrade to Cat 6 wiring, therefore reducing wiring costs & hassle.\n\n The GS110MX & GS110EMX offer flexible mounting options
- they can be mounted in a rack, on a wall or can be used as a desktop switch. Moreover the compact & fanless design make the GS110MX & GS110EMX ideal for any home or business environment. Feature Feature Value Switch type Unmanaged Basic switching RJ-45 Ethernet ports quantity 10 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Gigabit Ethernet (copper) ports quantity 8 Power connector DC-in jack Networking standards IEEE 802.1p, IEEE 802.3az, IEEE 802.3x 10G support Y Cable types supported Cat 5, Cat 5e, Cat 6, Cat 6a, Cat 7 Full duplex Y Flow control support YVLAN support NMAC address table 16000 entries Switching capacity 56 Gbit/s Forwarding rate 41.664 Mpps Latency (10-100 Mbps)7 &181;s Latency (1 Gbps)4 &181;s Latency (10 Gbps)3 &181;s Number of queues 8 Jumbo frames support Y Jumbo frames 10240 Packet buffer memory 0.128 MBQueue scheduling algorithms Weighted Round Robin (WRR) Rack mounting Y Product colour Black Housing material Metal LED indicators Link, Power, Speed Wall mountable Y Safety UL/c UL Listed (UL 60950-1)/CAN/CSA C22.2 No. 60960-1-07, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, AS/NZS 60950.1:2015 Electromagnetic compatibility Class BCertification 47 CFR FCC Part 15, Subpart B, Class Bn ICES-003:2016 Issue 6, Class Bn ANSI C63.4:2014n N 55032:2012 +AC:2013 / CISPR 32:2012 / AS/NZS CISPR 32:2013, Class Bn EN 55032:2015 +AC:2016 / CISPR 32:2015 +COR1:2016 / AS/NZS CISPR 32:2015, Class Bn EN 61000-3-2:2014n EN 61000-3-3:2013n EN 55024:2010 +A1:2015 Output voltage 12 VOutput current 1.5 APower consumption (typical)4.8 WPower consumption (max)13.2 WPower over Ethernet (Po E)NOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 90% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Non-operating altitude 0
- 3000 m Heat dissipation 45.14 BTU/h Width 236 mm Depth 102 mm Height 27 mm Weight 740 g Quick start guide Y Wall mounting kit YAC adapter included Y Rack mount kit Y Rubber feet Y






...

Small, Yet Powerful Gigabit Smart Switch Packed with Advanced Features Joining NETGEAR′s Pro Safe family of Smart Switches with high performance & cost efficiency, this 10-port Gigabit Smart Switch is packed with powerful features capable of enhancing any type of business network. The GS110TP is designed for customers who need a low port density solution with the combination of Gigabit speed & Po E capability. The GS110TP comes with 8 dedicated 10/100/1000 Mbps copper ports to connect to your end devices & two additional Gigabit Fiber ports for uplinks with greater distance. With Po E capability on all 8 copper ports, the GS110TP can automatically detect Po E on the end devices & dynamically manage power assignments & priority. It is capable of delivering up to 15.4W of power to devices such as wireless access points, IP phones & IP cameras, providing flexibility & ease of deployment to your network. The GS110TP comes with A superbly comprehensive set of features, such as enhanced VLAN & Qo S, access control lists (ACL), 802.1x port authentication, rate limiting & IGMP snooping & many more, to provide businesses with networks that are geared for growth while ensuring performance & reliability. With the fanless design & compact form factor, the GS110TP offers quiet operation & is suitable for deployments in any type of environment, especially the ones which are sensitive to noise. Po E Power Management GS110TP offers useful Po E power management features to help you better control & monitor your power resource. The Po E timer can help turn off the Po E ports during certain times of the day so that your network can be more secure as well as energy efficient. It can also set prioritization on power usage so that specified ports are always guaranteed to get the power first if total power required exceeds the total power budget. The power will be assigned to the Po E ports dynamically depending on the actual power need of the individual network devices so that you don′t need to do any calculation. The Po E LED on the front panel will light up if the Po E usage is reaching the threshold, meaning that insufficient Po E resource is left for powering up additional ports. NETGEAR Green
- Up to 70% power savings compared to the non-Green version
- Auto power-down mode saves energy when port is not in use
- Cable length detection reduces power usage when network cable is shorter than 10 meters Advanced Quality of Service (Qo S) Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion from high-traffic bursts. Companies implementing network telephony or video conferencing, for example, need to be able to prioritize such voice & video traffic & other real-time applications over less latency-sensitive traffic to ensure reliability & quality. The ability to prioritize traffic ensures quality of latency-sensitive services & applications despite increasing traffic loads. The GS110TP provides an extensive set of Qo S

Features:
- 802.1p-based prioritization
- Layer 3-based prioritization
- Rate limiting Advanced Security The GS110TP provides more robust security. This
Includes::
- 802.1x for authentication
- ACL filtering to permit or deny traffic based on MAC or IP addresses Usability Enhancements The GS110TP is a powerful switch, yet very ease to manage. It comes with many usability enhancements to help customers fully utilize the features for a more optimized & secure network. For example, the Auto Voice VLAN & Auto Video features will assist customers to easily set up Vo IP or IP surveillance networks with a couple of simple steps. You don′t need to be an IT professional to set up Vo IP or IP surveillance. Security is critical for business networks. However, not everyone knows how to set up a secure network. The ACL Wizards on the GS110TP will guide even na&2ve users through the setup of access control & address filtering. Centralized Management via the New Smart Control Center With multiple switches in the network, managing configurations on each switch & upgrading firmware becomes a big challenge. NETGEAR′s Smart Control Center that comes with the GS110TP & many other Smart switch models can help make this task much easier & simpler. It can perform discovery of the switches on your network, push configuration & firmware updates to multiple selected switches at once, & can even schedule when the tasks should be performed.










...

Today&153;s growing businesses demand & rely more on their network to carry out mission-critical business activities. Companies are putting more network traffic & applications on their Ethernet infrastructure. For example, the increasing deployments of Vo IP phones & IP cameras require more than simple plug-&-play connectivity. It needs the network intelligence to separate the voice & video traffic from data, & prioritize them accordingly. in addition, Internet-based applications such as Hotmail & Google Calendaring have made keeping the network up a business-critical need. However, companies do not necessarily have more money or advanced training to deal with complex managed switches. NETGEAR&153;s new Pro Safe Plus Switches meet this growing need by providing fundamental network features that will help optimize the performance of business networks. Pro Safe Plus Switches also offer traffic monitoring for users to observe traffic behavior. If there are connectivity issues, these switches can identify & even locate connection problems via cable diagnostic test. To optimize traffic through the switches, Pro Safe Plus Switches offer both port & tag-based prioritization to keep latency-sensitive traffic moving ahead of less critical packets. Also, Pro Safe Plus Switches offer port & 802.1Q-based VLAN as a means of improving security & network performance. Pro Safe Plus Switches are an upgrade from the plug-&-play Unmanaged Switch, delivering great value for empowering your network, delivering great value to the end user.\n\n- Pro Safe Plus Switch delivers network monitoring, traffic prioritization & VLAN\n- 16 ports deliver up to 2000 Mbps of dedicated, non-blocking bandwidth per port\n- Simple, yet useful network set-up on top of plug-&-play connectivity\n- Gigabit speed with Qo S, VLAN & network monitoring\n- VLAN support for traffic segmentation\n- Quality of Service (Qo S) for traffic prioritization\n- Auto &156;denial-of-service&157; (Do S) prevention\n- Troubleshoot connection issues via cable test\n- Loop prevention & broadcast storm controls\n- IGMP snooping v 1, v 2 & v 3 support for multicast optimization\n- Rate limiting for better bandwidth allocation\n- Port mirroring for network monitoring\n- Jumbo frame support Feature Feature Value Switch type Unmanaged Switch layer L2 Quality of Service (Qo S) support Y Basic switching RJ-45 Ethernet ports quantity 16 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Power connector DC-in jack Networking standards IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z 10G support N Copper ethernet cabling technology 1000BASE-T, 100BASE-TX, 10BASE-TPort mirroring Y Full duplex Y Flow control support Y Rate limiting YVLAN support Y Jumbo frames support YIGMP snooping Y Rack mounting Y Product colour Black Safety CE/LVD, EN 60950, CB, CCCCompatible operating systems Microsoft Windows 7/ Vista/XPInput current 1.5 APower over Ethernet (Po E)NOperating temperature (T-T)0
- 50 &176;COperating relative humidity (H-H)0
- 90% Width 287 mm Depth 103 mm Height 27 mm Weight 810 g Quick start guide Y User guide Y Manual Y Input voltage 12 V

...

Instant Connectivity with Reliable Performance\n The NETGEAR Gigabit Unmanaged Switch series helps businesses cost-effectively expand their network to Gigabit speeds & higher port counts. These unmanaged Gigabit switches come in a wide range of models including desktop, wall-mount & rackmount form factors & 5 to 24 port configurations.\n\n They are energy efficient, built to last, & rigorously tested to provide the reliability businesses need. 802.1p traffic prioritization & jumbo frame support allow for seamless integration with more sophisticated networks.\n\n High quality components & Energy Efficiency\n Unmanaged Gigabit switches are built with finest top quality components to assure a long life. Unmanaged switches are built to last, & rigorously tested to provide the reliability businesses need.\n\n NETGEAR Unmanaged Switches also support the latest Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption when there is light traffic on an active ports or when there is no link or no activity detected. It can further save energy when a short cable is used.\n\n Po E+ Support (GS108LP, GS108PP, GS116LP, GS116PP)\n Power-Over-Ethernet (Po E) & Po E+ options available for powering IP Security Cameras, Vo IP phones, wireless access points, & other Ethernet-powered devices.\n\n These Po E+ Switches are not just flexible in terms of placement they are also flexible in terms of Po E Power. Thanks to the interchangeable external Power Supply & with a built-in Po E selector they allow you to increase or decrease the Po E budget at any time.\n\n The flexible mounting system gives you the flexibility to place them in a desktop environment, mounted in a rack (accessories included) or wall-mounted. Feature Feature Value Switch type Unmanaged Basic switching RJ-45 Ethernet ports quantity 16 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Networking standards IEEE 802.1p, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3x MAC address table 4000 entries Switching capacity 32 Gbit/s Jumbo frames support Y Rack mounting Y Product colour Black LED indicators Y Number of fans 1 fan (s) Certification CE, FCC, ICES-003, VCCI, RCM, BSMI, KC, CB, CE LVD, BSMI, EAC, RCM, KC, EN 60950-1 Buffer size 1000 KBMean time between failures (MTBF)2088514 h DC input voltage 54 VInput current 1.66 APower consumption (typical)90 WPower over Ethernet (Po E)YPower over Ethernet plus (Po E+) ports quantity 16 Total Power over Ethernet (Po E) budget 76 WOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 90% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Heat dissipation 270.18 BTU/h Width 286 mm Depth 102 mm Height 27 mm Weight 880 g




...

Instant Connectivity with Reliable Performance\n The NETGEAR Gigabit Unmanaged Switch series helps businesses cost-effectively expand their network to Gigabit speeds & higher port counts. These unmanaged Gigabit switches come in a wide range of models including desktop, wall-mount & rackmount form factors & 5 to 24 port configurations.\n\n They are energy efficient, built to last, & rigorously tested to provide the reliability businesses need. 802.1p traffic prioritization & jumbo frame support allow for seamless integration with more sophisticated networks.\n\n High quality components & Energy Efficiency\n Unmanaged Gigabit switches are built with finest top quality components to assure a long life. Unmanaged switches are built to last, & rigorously tested to provide the reliability businesses need.\n\n NETGEAR Unmanaged Switches also support the latest Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption when there is light traffic on an active ports or when there is no link or no activity detected. It can further save energy when a short cable is used.\n\n Po E+ Support (GS108LP, GS108PP, GS116LP, GS116PP)\n Power-Over-Ethernet (Po E) & Po E+ options available for powering IP Security Cameras, Vo IP phones, wireless access points, & other Ethernet-powered devices.\n\n These Po E+ Switches are not just flexible in terms of placement they are also flexible in terms of Po E Power. Thanks to the interchangeable external Power Supply & with a built-in Po E selector they allow you to increase or decrease the Po E budget at any time.\n\n The flexible mounting system gives you the flexibility to place them in a desktop environment, mounted in a rack (accessories included) or wall-mounted. Feature Feature Value Switch type Unmanaged Basic switching RJ-45 Ethernet ports quantity 16 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Networking standards IEEE 802.1p, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3x MAC address table 4000 entries Switching capacity 32 Gbit/s Jumbo frames support Y Rack mounting Y Product colour Black LED indicators Y Number of fans 1 fan (s) Certification CE, FCC, ICES-003, VCCI, RCM, BSMI, KC, CB, CE LVD, BSMI, EAC, RCM, KC, EN 60950-1 Buffer size 1000 KBMean time between failures (MTBF)2088514 h DC input voltage 54 VInput current 1.66 APower consumption (typical)90 WPower over Ethernet (Po E)YPower over Ethernet plus (Po E+) ports quantity 16 Total Power over Ethernet (Po E) budget 76 WOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 90% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Heat dissipation 270.18 BTU/h Width 286 mm Depth 102 mm Height 27 mm Weight 880 g




...

Instant Connectivity with Reliable Performance\n The NETGEAR Gigabit Unmanaged Switch series helps businesses cost-effectively expand their network to Gigabit speeds & higher port counts. These unmanaged Gigabit switches come in a wide range of models including desktop, wall-mount & rackmount form factors & 5 to 24 port configurations.\n\n They are energy efficient, built to last, & rigorously tested to provide the reliability businesses need. 802.1p traffic prioritization & jumbo frame support allow for seamless integration with more sophisticated networks.\n\n High quality components & Energy Efficiency\n Unmanaged Gigabit switches are built with finest top quality components to assure a long life. Unmanaged switches are built to last, & rigorously tested to provide the reliability businesses need.\n\n NETGEAR Unmanaged Switches also support the latest Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption when there is light traffic on an active ports or when there is no link or no activity detected. It can further save energy when a short cable is used.\n\n Po E+ Support (GS108LP, GS108PP, GS116LP, GS116PP)\n Power-Over-Ethernet (Po E) & Po E+ options available for powering IP Security Cameras, Vo IP phones, wireless access points, & other Ethernet-powered devices.\n\n These Po E+ Switches are not just flexible in terms of placement they are also flexible in terms of Po E Power. Thanks to the interchangeable external Power Supply & with a built-in Po E selector they allow you to increase or decrease the Po E budget at any time.\n\n The flexible mounting system gives you the flexibility to place them in a desktop environment, mounted in a rack (accessories included) or wall-mounted. Feature Feature Value Switch type Unmanaged Basic switching RJ-45 Ethernet ports quantity 16 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Networking standards IEEE 802.1p, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3x MAC address table 4000 entries Switching capacity 32 Gbit/s Rack mounting Y Product colour Black LED indicators Y Number of fans 1 fan (s) Certification CE, FCC, ICES-003, VCCI, RCM, BSMI, KC, CB, CE LVD, BSMI, EAC, RCM, KC, EN 60950-1 Buffer size 1000 KBMean time between failures (MTBF)2088514 h DC input voltage 54 VInput current 3.7 APower consumption (typical)200 WPower over Ethernet (Po E)YPower over Ethernet plus (Po E+) ports quantity 16 Total Power over Ethernet (Po E) budget 183 WOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 90% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Heat dissipation 680.58 BTU/h Width 286 mm Depth 102 mm Height 27 mm Weight 880 g




...

Instant Connectivity with Reliable Performance\n The NETGEAR Gigabit Unmanaged Switch series helps businesses cost-effectively expand their network to Gigabit speeds & higher port counts. These unmanaged Gigabit switches come in a wide range of models including desktop, wall-mount & rackmount form factors & 5 to 24 port configurations.\n\n They are energy efficient, built to last, & rigorously tested to provide the reliability businesses need. 802.1p traffic prioritization & jumbo frame support allow for seamless integration with more sophisticated networks.\n\n High quality components & Energy Efficiency\n Unmanaged Gigabit switches are built with finest top quality components to assure a long life. Unmanaged switches are built to last, & rigorously tested to provide the reliability businesses need.\n\n NETGEAR Unmanaged Switches also support the latest Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption when there is light traffic on an active ports or when there is no link or no activity detected. It can further save energy when a short cable is used.\n\n Po E+ Support (GS108LP, GS108PP, GS116LP, GS116PP)\n Power-Over-Ethernet (Po E) & Po E+ options available for powering IP Security Cameras, Vo IP phones, wireless access points, & other Ethernet-powered devices.\n\n These Po E+ Switches are not just flexible in terms of placement they are also flexible in terms of Po E Power. Thanks to the interchangeable external Power Supply & with a built-in Po E selector they allow you to increase or decrease the Po E budget at any time.\n\n The flexible mounting system gives you the flexibility to place them in a desktop environment, mounted in a rack (accessories included) or wall-mounted. Feature Feature Value Switch type Unmanaged Basic switching RJ-45 Ethernet ports quantity 16 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Networking standards IEEE 802.1p, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3x MAC address table 4000 entries Switching capacity 32 Gbit/s Rack mounting Y Product colour Black LED indicators Y Number of fans 1 fan (s) Certification CE, FCC, ICES-003, VCCI, RCM, BSMI, KC, CB, CE LVD, BSMI, EAC, RCM, KC, EN 60950-1 Buffer size 1000 KBMean time between failures (MTBF)2088514 h DC input voltage 54 VInput current 3.7 APower consumption (typical)200 WPower over Ethernet (Po E)YPower over Ethernet plus (Po E+) ports quantity 16 Total Power over Ethernet (Po E) budget 183 WOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 90% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Heat dissipation 680.58 BTU/h Width 286 mm Depth 102 mm Height 27 mm Weight 880 g




...