The GS110EMX & GS110MX come with 8 Gigabit Ethernet ports & 2 uplink 10-Gigabit/ Multi-Gigabit (5-speed) ports that provide either 100 Megabit, 1-Gigabit, 2.5-Gigabit, 5-Gigabit or 10-Gigabit connectivity. \n\n The two uplink ports automatically detects which speed is needed by the connected device & provides the adequate speed. Moreover these two Multi-speed switch ports can be connected with regular Cat 5E Ethernet cables, without the need to upgrade to Cat 6 wiring, therefore reducing wiring costs & hassle.\n\n The GS110MX & GS110EMX offer flexible mounting options
- they can be mounted in a rack, on a wall or can be used as a desktop switch. Moreover the compact & fanless design make the GS110MX & GS110EMX ideal for any home or business environment. Feature Feature Value Switch type Unmanaged Basic switching RJ-45 Ethernet ports quantity 10 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Gigabit Ethernet (copper) ports quantity 8 Power connector DC-in jack Networking standards IEEE 802.1p, IEEE 802.3az, IEEE 802.3x 10G support Y Cable types supported Cat 5, Cat 5e, Cat 6, Cat 6a, Cat 7 Full duplex Y Flow control support YVLAN support NMAC address table 16000 entries Switching capacity 56 Gbit/s Forwarding rate 41.664 Mpps Latency (10-100 Mbps)7 &181;s Latency (1 Gbps)4 &181;s Latency (10 Gbps)3 &181;s Number of queues 8 Jumbo frames support Y Jumbo frames 10240 Packet buffer memory 0.128 MBQueue scheduling algorithms Weighted Round Robin (WRR) Rack mounting Y Product colour Black Housing material Metal LED indicators Link, Power, Speed Wall mountable Y Safety UL/c UL Listed (UL 60950-1)/CAN/CSA C22.2 No. 60960-1-07, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, AS/NZS 60950.1:2015 Electromagnetic compatibility Class BCertification 47 CFR FCC Part 15, Subpart B, Class Bn ICES-003:2016 Issue 6, Class Bn ANSI C63.4:2014n N 55032:2012 +AC:2013 / CISPR 32:2012 / AS/NZS CISPR 32:2013, Class Bn EN 55032:2015 +AC:2016 / CISPR 32:2015 +COR1:2016 / AS/NZS CISPR 32:2015, Class Bn EN 61000-3-2:2014n EN 61000-3-3:2013n EN 55024:2010 +A1:2015 Output voltage 12 VOutput current 1.5 APower consumption (typical)4.8 WPower consumption (max)13.2 WPower over Ethernet (Po E)NOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 90% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Non-operating altitude 0
- 3000 m Heat dissipation 45.14 BTU/h Width 236 mm Depth 102 mm Height 27 mm Weight 740 g Quick start guide Y Wall mounting kit YAC adapter included Y Rack mount kit Y Rubber feet Y






...

Small, Yet Powerful Gigabit Smart Switch Packed with Advanced Features Joining NETGEAR′s Pro Safe family of Smart Switches with high performance & cost efficiency, this 10-port Gigabit Smart Switch is packed with powerful features capable of enhancing any type of business network. The GS110TP is designed for customers who need a low port density solution with the combination of Gigabit speed & Po E capability. The GS110TP comes with 8 dedicated 10/100/1000 Mbps copper ports to connect to your end devices & two additional Gigabit Fiber ports for uplinks with greater distance. With Po E capability on all 8 copper ports, the GS110TP can automatically detect Po E on the end devices & dynamically manage power assignments & priority. It is capable of delivering up to 15.4W of power to devices such as wireless access points, IP phones & IP cameras, providing flexibility & ease of deployment to your network. The GS110TP comes with A superbly comprehensive set of features, such as enhanced VLAN & Qo S, access control lists (ACL), 802.1x port authentication, rate limiting & IGMP snooping & many more, to provide businesses with networks that are geared for growth while ensuring performance & reliability. With the fanless design & compact form factor, the GS110TP offers quiet operation & is suitable for deployments in any type of environment, especially the ones which are sensitive to noise. Po E Power Management GS110TP offers useful Po E power management features to help you better control & monitor your power resource. The Po E timer can help turn off the Po E ports during certain times of the day so that your network can be more secure as well as energy efficient. It can also set prioritization on power usage so that specified ports are always guaranteed to get the power first if total power required exceeds the total power budget. The power will be assigned to the Po E ports dynamically depending on the actual power need of the individual network devices so that you don′t need to do any calculation. The Po E LED on the front panel will light up if the Po E usage is reaching the threshold, meaning that insufficient Po E resource is left for powering up additional ports. NETGEAR Green
- Up to 70% power savings compared to the non-Green version
- Auto power-down mode saves energy when port is not in use
- Cable length detection reduces power usage when network cable is shorter than 10 meters Advanced Quality of Service (Qo S) Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion from high-traffic bursts. Companies implementing network telephony or video conferencing, for example, need to be able to prioritize such voice & video traffic & other real-time applications over less latency-sensitive traffic to ensure reliability & quality. The ability to prioritize traffic ensures quality of latency-sensitive services & applications despite increasing traffic loads. The GS110TP provides an extensive set of Qo S

Features:
- 802.1p-based prioritization
- Layer 3-based prioritization
- Rate limiting Advanced Security The GS110TP provides more robust security. This
Includes::
- 802.1x for authentication
- ACL filtering to permit or deny traffic based on MAC or IP addresses Usability Enhancements The GS110TP is a powerful switch, yet very ease to manage. It comes with many usability enhancements to help customers fully utilize the features for a more optimized & secure network. For example, the Auto Voice VLAN & Auto Video features will assist customers to easily set up Vo IP or IP surveillance networks with a couple of simple steps. You don′t need to be an IT professional to set up Vo IP or IP surveillance. Security is critical for business networks. However, not everyone knows how to set up a secure network. The ACL Wizards on the GS110TP will guide even na&2ve users through the setup of access control & address filtering. Centralized Management via the New Smart Control Center With multiple switches in the network, managing configurations on each switch & upgrading firmware becomes a big challenge. NETGEAR′s Smart Control Center that comes with the GS110TP & many other Smart switch models can help make this task much easier & simpler. It can perform discovery of the switches on your network, push configuration & firmware updates to multiple selected switches at once, & can even schedule when the tasks should be performed.










...

Today&153;s growing businesses demand & rely more on their network to carry out mission-critical business activities. Companies are putting more network traffic & applications on their Ethernet infrastructure. For example, the increasing deployments of Vo IP phones & IP cameras require more than simple plug-&-play connectivity. It needs the network intelligence to separate the voice & video traffic from data, & prioritize them accordingly. in addition, Internet-based applications such as Hotmail & Google Calendaring have made keeping the network up a business-critical need. However, companies do not necessarily have more money or advanced training to deal with complex managed switches. NETGEAR&153;s new Pro Safe Plus Switches meet this growing need by providing fundamental network features that will help optimize the performance of business networks. Pro Safe Plus Switches also offer traffic monitoring for users to observe traffic behavior. If there are connectivity issues, these switches can identify & even locate connection problems via cable diagnostic test. To optimize traffic through the switches, Pro Safe Plus Switches offer both port & tag-based prioritization to keep latency-sensitive traffic moving ahead of less critical packets. Also, Pro Safe Plus Switches offer port & 802.1Q-based VLAN as a means of improving security & network performance. Pro Safe Plus Switches are an upgrade from the plug-&-play Unmanaged Switch, delivering great value for empowering your network, delivering great value to the end user.\n\n- Pro Safe Plus Switch delivers network monitoring, traffic prioritization & VLAN\n- 16 ports deliver up to 2000 Mbps of dedicated, non-blocking bandwidth per port\n- Simple, yet useful network set-up on top of plug-&-play connectivity\n- Gigabit speed with Qo S, VLAN & network monitoring\n- VLAN support for traffic segmentation\n- Quality of Service (Qo S) for traffic prioritization\n- Auto &156;denial-of-service&157; (Do S) prevention\n- Troubleshoot connection issues via cable test\n- Loop prevention & broadcast storm controls\n- IGMP snooping v 1, v 2 & v 3 support for multicast optimization\n- Rate limiting for better bandwidth allocation\n- Port mirroring for network monitoring\n- Jumbo frame support Feature Feature Value Switch type Unmanaged Switch layer L2 Quality of Service (Qo S) support Y Basic switching RJ-45 Ethernet ports quantity 16 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Power connector DC-in jack Networking standards IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z 10G support N Copper ethernet cabling technology 1000BASE-T, 100BASE-TX, 10BASE-TPort mirroring Y Full duplex Y Flow control support Y Rate limiting YVLAN support Y Jumbo frames support YIGMP snooping Y Rack mounting Y Product colour Black Safety CE/LVD, EN 60950, CB, CCCCompatible operating systems Microsoft Windows 7/ Vista/XPInput current 1.5 APower over Ethernet (Po E)NOperating temperature (T-T)0
- 50 &176;COperating relative humidity (H-H)0
- 90% Width 287 mm Depth 103 mm Height 27 mm Weight 810 g Quick start guide Y User guide Y Manual Y Input voltage 12 V

...

Today&153;s growing businesses demand & rely more on their network to carry out mission-critical business activities. Companies are putting more network traffic & applications on their Ethernet infrastructure. For example, the increasing deployments of Vo IP phones & IP cameras require more than simple plug-&-play connectivity. It needs the network intelligence to separate the voice & video traffic from data, & prioritize them accordingly. in addition, Internet-based applications such as Hotmail & Google Calendaring have made keeping the network up a business-critical need. However, companies do not necessarily have more money or advanced training to deal with complex managed switches. NETGEAR&153;s new Pro Safe Plus Switches meet this growing need by providing fundamental network features that will help optimize the performance of business networks. Pro Safe Plus Switches also offer traffic monitoring for users to observe traffic behavior. If there are connectivity issues, these switches can identify & even locate connection problems via cable diagnostic test. To optimize traffic through the switches, Pro Safe Plus Switches offer both port & tag-based prioritization to keep latency-sensitive traffic moving ahead of less critical packets. Also, Pro Safe Plus Switches offer port & 802.1Q-based VLAN as a means of improving security & network performance. Pro Safe Plus Switches are an upgrade from the plug-&-play Unmanaged Switch, delivering great value for empowering your network, delivering great value to the end user.\n\n- Pro Safe Plus Switch delivers network monitoring, traffic prioritization & VLAN\n- 16 ports deliver up to 2000 Mbps of dedicated, non-blocking bandwidth per port\n- Simple, yet useful network set-up on top of plug-&-play connectivity\n- Gigabit speed with Qo S, VLAN & network monitoring\n- VLAN support for traffic segmentation\n- Quality of Service (Qo S) for traffic prioritization\n- Auto &156;denial-of-service&157; (Do S) prevention\n- Troubleshoot connection issues via cable test\n- Loop prevention & broadcast storm controls\n- IGMP snooping v 1, v 2 & v 3 support for multicast optimization\n- Rate limiting for better bandwidth allocation\n- Port mirroring for network monitoring\n- Jumbo frame support Feature Feature Value Switch type Unmanaged Switch layer L2 Quality of Service (Qo S) support Y Basic switching RJ-45 Ethernet ports quantity 16 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Power connector DC-in jack Networking standards IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z 10G support N Copper ethernet cabling technology 1000BASE-T, 100BASE-TX, 10BASE-TPort mirroring Y Full duplex Y Flow control support Y Rate limiting YVLAN support Y Jumbo frames support YIGMP snooping Y Rack mounting Y Product colour Black Safety CE/LVD, EN 60950, CB, CCCCompatible operating systems Microsoft Windows 7/ Vista/XPInput current 1.5 APower over Ethernet (Po E)NOperating temperature (T-T)0
- 50 &176;COperating relative humidity (H-H)0
- 90% Width 287 mm Depth 103 mm Height 27 mm Weight 810 g Quick start guide Y User guide Y Manual Y Input voltage 12 V

...

Instant Connectivity with Reliable Performance\n The NETGEAR Gigabit Unmanaged Switch series helps businesses cost-effectively expand their network to Gigabit speeds & higher port counts. These unmanaged Gigabit switches come in a wide range of models including desktop, wall-mount & rackmount form factors & 5 to 24 port configurations.\n\n They are energy efficient, built to last, & rigorously tested to provide the reliability businesses need. 802.1p traffic prioritization & jumbo frame support allow for seamless integration with more sophisticated networks.\n\n High quality components & Energy Efficiency\n Unmanaged Gigabit switches are built with finest top quality components to assure a long life. Unmanaged switches are built to last, & rigorously tested to provide the reliability businesses need.\n\n NETGEAR Unmanaged Switches also support the latest Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption when there is light traffic on an active ports or when there is no link or no activity detected. It can further save energy when a short cable is used.\n\n Po E+ Support (GS108LP, GS108PP, GS116LP, GS116PP)\n Power-Over-Ethernet (Po E) & Po E+ options available for powering IP Security Cameras, Vo IP phones, wireless access points, & other Ethernet-powered devices.\n\n These Po E+ Switches are not just flexible in terms of placement they are also flexible in terms of Po E Power. Thanks to the interchangeable external Power Supply & with a built-in Po E selector they allow you to increase or decrease the Po E budget at any time.\n\n The flexible mounting system gives you the flexibility to place them in a desktop environment, mounted in a rack (accessories included) or wall-mounted. Feature Feature Value Switch type Unmanaged Basic switching RJ-45 Ethernet ports quantity 16 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Networking standards IEEE 802.1p, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3x MAC address table 4000 entries Switching capacity 32 Gbit/s Jumbo frames support Y Rack mounting Y Product colour Black LED indicators Y Number of fans 1 fan (s) Certification CE, FCC, ICES-003, VCCI, RCM, BSMI, KC, CB, CE LVD, BSMI, EAC, RCM, KC, EN 60950-1 Buffer size 1000 KBMean time between failures (MTBF)2088514 h DC input voltage 54 VInput current 1.66 APower consumption (typical)90 WPower over Ethernet (Po E)YPower over Ethernet plus (Po E+) ports quantity 16 Total Power over Ethernet (Po E) budget 76 WOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 90% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Heat dissipation 270.18 BTU/h Width 286 mm Depth 102 mm Height 27 mm Weight 880 g




...

Instant Connectivity with Reliable Performance\n The NETGEAR Gigabit Unmanaged Switch series helps businesses cost-effectively expand their network to Gigabit speeds & higher port counts. These unmanaged Gigabit switches come in a wide range of models including desktop, wall-mount & rackmount form factors & 5 to 24 port configurations.\n\n They are energy efficient, built to last, & rigorously tested to provide the reliability businesses need. 802.1p traffic prioritization & jumbo frame support allow for seamless integration with more sophisticated networks.\n\n High quality components & Energy Efficiency\n Unmanaged Gigabit switches are built with finest top quality components to assure a long life. Unmanaged switches are built to last, & rigorously tested to provide the reliability businesses need.\n\n NETGEAR Unmanaged Switches also support the latest Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption when there is light traffic on an active ports or when there is no link or no activity detected. It can further save energy when a short cable is used.\n\n Po E+ Support (GS108LP, GS108PP, GS116LP, GS116PP)\n Power-Over-Ethernet (Po E) & Po E+ options available for powering IP Security Cameras, Vo IP phones, wireless access points, & other Ethernet-powered devices.\n\n These Po E+ Switches are not just flexible in terms of placement they are also flexible in terms of Po E Power. Thanks to the interchangeable external Power Supply & with a built-in Po E selector they allow you to increase or decrease the Po E budget at any time.\n\n The flexible mounting system gives you the flexibility to place them in a desktop environment, mounted in a rack (accessories included) or wall-mounted. Feature Feature Value Switch type Unmanaged Basic switching RJ-45 Ethernet ports quantity 16 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Networking standards IEEE 802.1p, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3x MAC address table 4000 entries Switching capacity 32 Gbit/s Rack mounting Y Product colour Black LED indicators Y Number of fans 1 fan (s) Certification CE, FCC, ICES-003, VCCI, RCM, BSMI, KC, CB, CE LVD, BSMI, EAC, RCM, KC, EN 60950-1 Buffer size 1000 KBMean time between failures (MTBF)2088514 h DC input voltage 54 VInput current 3.7 APower consumption (typical)200 WPower over Ethernet (Po E)YPower over Ethernet plus (Po E+) ports quantity 16 Total Power over Ethernet (Po E) budget 183 WOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 90% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Heat dissipation 680.58 BTU/h Width 286 mm Depth 102 mm Height 27 mm Weight 880 g




...

Instant Connectivity with Reliable Performance\n The NETGEAR Gigabit Unmanaged Switch series helps businesses cost-effectively expand their network to Gigabit speeds & higher port counts. These unmanaged Gigabit switches come in a wide range of models including desktop, wall-mount & rackmount form factors & 5 to 24 port configurations.\n\n They are energy efficient, built to last, & rigorously tested to provide the reliability businesses need. 802.1p traffic prioritization & jumbo frame support allow for seamless integration with more sophisticated networks.\n\n High quality components & Energy Efficiency\n Unmanaged Gigabit switches are built with finest top quality components to assure a long life. Unmanaged switches are built to last, & rigorously tested to provide the reliability businesses need.\n\n NETGEAR Unmanaged Switches also support the latest Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption when there is light traffic on an active ports or when there is no link or no activity detected. It can further save energy when a short cable is used.\n\n Po E+ Support (GS108LP, GS108PP, GS116LP, GS116PP)\n Power-Over-Ethernet (Po E) & Po E+ options available for powering IP Security Cameras, Vo IP phones, wireless access points, & other Ethernet-powered devices.\n\n These Po E+ Switches are not just flexible in terms of placement they are also flexible in terms of Po E Power. Thanks to the interchangeable external Power Supply & with a built-in Po E selector they allow you to increase or decrease the Po E budget at any time.\n\n The flexible mounting system gives you the flexibility to place them in a desktop environment, mounted in a rack (accessories included) or wall-mounted. Feature Feature Value Switch type Unmanaged Basic switching RJ-45 Ethernet ports quantity 16 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Networking standards IEEE 802.1p, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3x MAC address table 4000 entries Switching capacity 32 Gbit/s Rack mounting Y Product colour Black LED indicators Y Number of fans 1 fan (s) Certification CE, FCC, ICES-003, VCCI, RCM, BSMI, KC, CB, CE LVD, BSMI, EAC, RCM, KC, EN 60950-1 Buffer size 1000 KBMean time between failures (MTBF)2088514 h DC input voltage 54 VInput current 3.7 APower consumption (typical)200 WPower over Ethernet (Po E)YPower over Ethernet plus (Po E+) ports quantity 16 Total Power over Ethernet (Po E) budget 183 WOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 90% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Heat dissipation 680.58 BTU/h Width 286 mm Depth 102 mm Height 27 mm Weight 880 g




...

https://www.youtube.com/embed/u 6P87hd I3 Qw\n\n Easy to manage, fundamental network features at an affordable cost for SMBs. GS305EPP offers 120W total power budget to power devices Po E devices such as Vo IP phones, IP cameras, wireless access points, etc.\n\n New & enhanced Smart Managed Plus switches\n Along with the already great Smart Managed Plus features, GS305EPP enhances your business networking experience even more with exciting new

Features: advanced Po E controls with uninterrupted Po E & more, business-friendly GUI, simplified VLAN & Qo S set-up, & multi-language support\n\n Why GS305EPP?\n- Cost-effective business networking management

Features: VLAN, Qo S, advanced Po E controls, etc.\n- Data security & network separation to safeguard your business.\n- Advanced per port Po E controls (including power allocation override) & remote enable/disable/power cycle.\n- Smart Managed Plus switch that now provides Po E+ to power devices such as wireless APs, IP cameras, Vo IP phones, access-controlled security door locks or any other Io T Po E-powered devices.\n\n Why 300 Series NETGEAR Smart Managed Plus?\n- NETGEAR has the largest Po E switch portfolio in the market.\n- Provides both basic & advanced management features at a cost-effective price for SMBs.\n- Uninterrupted Po E & Po E controls in a Smart Plus switch.\n- Reliability of the NETGEAR switches.\n\n\n\n\n\n Product Model: GS305EPP\n Datasheet: https://d 5bm 31en 4blvo.cloudfront.net/pdf/mmo_87331432_1609130642_7963_24010.pdf\n\n



...

https://www.youtube.com/embed/u 6P87hd I3 Qw\n\n Easy to manage, fundamental network features at an affordable cost for SMBs. GS305EPP offers 120W total power budget to power devices Po E devices such as Vo IP phones, IP cameras, wireless access points, etc.\n\n New & enhanced Smart Managed Plus switches\n Along with the already great Smart Managed Plus features, GS305EPP enhances your business networking experience even more with exciting new

Features: advanced Po E controls with uninterrupted Po E & more, business-friendly GUI, simplified VLAN & Qo S set-up, & multi-language support\n\n Why GS305EPP?\n- Cost-effective business networking management

Features: VLAN, Qo S, advanced Po E controls, etc.\n- Data security & network separation to safeguard your business.\n- Advanced per port Po E controls (including power allocation override) & remote enable/disable/power cycle.\n- Smart Managed Plus switch that now provides Po E+ to power devices such as wireless APs, IP cameras, Vo IP phones, access-controlled security door locks or any other Io T Po E-powered devices.\n\n Why 300 Series NETGEAR Smart Managed Plus?\n- NETGEAR has the largest Po E switch portfolio in the market.\n- Provides both basic & advanced management features at a cost-effective price for SMBs.\n- Uninterrupted Po E & Po E controls in a Smart Plus switch.\n- Reliability of the NETGEAR switches.\n\n\n\n\n\n Product Model: GS305EPP\n Datasheet: https://d 5bm 31en 4blvo.cloudfront.net/pdf/mmo_87331432_1609130642_7963_24010.pdf\n\n



...

Expanding Wired Connectivity for SOHO Networks\n \n NETGEAR 300 Series Gigabit Ethernet Unmanaged Switches provide easy, reliable, & affordable network connectivity for home & small offices. With these unmanaged plug-&-play switches, you can expand your network connections to multiple devices instantly. The GS305P/GS305PP & GS308P with Power-over-Ethernet (Po E) provides power & data from a single Ethernet (CAT-5) cable to devices such as IP cameras, Vo IP/ Internet-based phones, wireless access points, etc. Just step up to GS316, GS324 or GS348 directly to avoid congestion due to stacking up lower port count switches & be ready for future expansion.\n\n class="generic"> Management features Reset button Yes Quality of Service (Qo S) support Yes Ports & interfaces Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TBasic switching RJ-45 Ethernet ports quantity 4 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Gigabit Ethernet (copper) ports quantity 5 Console port RJ-45 Power connector DC-in jack Performance Packet buffer memory 128 MBAuto-negotiation Yes Power Power connector DC-in jack Power consumption (max)88.89 WPower consumption (typical)2.89 WInput current 1.66 ADC input voltage 54 VTechnical details Product colour Black Housing material Metal Rack mounting No Shipping (inner) case width 46.9 cm Shipping (inner) case net weight 8.34kg Shipping (inner) case length 23.7 cm Shipping (inner) case height 30.6 cm Quantity per shipping (inner) case 6 pc (s) Number of layers per pallet (sea)6 Number of layers per pallet (air)4 Number of cartons per pallet layer 10 Networking Cable length detection Yes Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TNetworking standards IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x Auto MDI/MDI-XYes 10G support No Auto-negotiation Yes Data transmission Packet forwarding rate (1 Gbps)1448000 pps Jumbo frames 9216 Latency (1 Gbps)2.4 &181;s Packet buffer memory 128 MBMAC address table 2000 entries Switching capacity 10 Gbit/s Jumbo frames support Yes Static route Yes Memory Packet buffer memory 128 MBDesign Wall mountable Yes Reset button Yes Product colour Black LED indicators Activity, Link, Po E, Power Housing material Metal Rack mounting No Indication LED indicators Activity, Link, Po E, Power Power over Ethernet (Po E) Power over Ethernet (Po E) power per port 30 WPower over Ethernet plus (Po E+) ports quantity 4 Total Power over Ethernet (Po E) budget 83 WPower over Ethernet (Po E) Yes Operational conditions Storage temperature (T-T)-20
- 70 &176;CStorage relative humidity (H-H)5
- 95% Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)10
- 90% Heat dissipation 304 BTU/h Weight & dimensions Width 158 mm Depth 101 mm Height 29 mm Weight 410 g Packaging data Package width 215 mm Package depth 269 mm Package height 73 mm Package weight 1.27kg Manual Yes Logistics data Master (outer) case width 23.7 cm Master (outer) case length 46.9 cm Master (outer) case height 30.6 cm Master (outer) case weight 8.31kg Quantity per master (outer) case 6 pc (s) Packaging content Manual Yes\n\n\n\nhttp://objects.icecat.biz/objects/mmo_74337774_1568193225_7233_17049.pdf



...