The DGS-1510 Series Gigabit Stackable Smart Managed Switches consists of:\n\n- DGS-1510-20: 20-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (smart fans)\n- DGS-1510-28: 28-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (smart fans)\n- DGS-1510-28X: 28-Port Gigabit Stackable Smart Managed Switch including 4 10G SFP+ (smart fans)\n- DGS-1510-28P: 28-Port Gigabit Stackable Po E Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (24 x Po E ports, smart fans)\n- DGS-1510-52: 52-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (smart fans)\n\n The DGS-1510 Series is D-Link&153;s latest generation of Smart Managed switches with 10G port connectivity, making them ideal for deployment in SME/SMB aggregation environments. The DGS-1510 Series provides a reliable & scalable interconnection between core switches & edge switches with rich capabilities & simplified flexibility. Available in 16, 24 or 48 10/100/1000 Mbps port models, with additional fibre ports for physical stacking & / or uplinks.\n\n The DGS-1510 Series Po E-enabled switches are ideal for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1510-28P 24-port Po E Switch supports up to 30W of power output giving you flexibility in power allocation for a variety of powered devices. This enables you to scale your operations to meet business growth & incorporate new technologies all with affordable installation costs.\n\n 10G SFP+ Stacking/ Uplink Ports\n Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510 Series in a single stack to allow simultaneous & easy configuration, management & troubleshooting. With 20 Gbps full duplex, the DGS-1510 Series offers 10G connectivity to core networks as well as servers with 10G capability while maintaining high performance & minimal impact to the data transfer rates.\n\n Layer 3 Traffic Management\n The DGS-1510 Series provides static route, allowing you to segment your network into workgroups & communicate across VLANs without degrading application performance. With these capabilities, you can boost the efficiency of your network by offloading internal traffic-handling tasks from your router & allowing it to manage external traffic & security.\n\n Extensive Layer 2 Features\n The DGS-1510 Series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, & Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN & automatically shuts down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators & customer service representatives, can quickly discover the type of error on cables as well as determine cable quality.\n\n Traffic Classification & Qo S\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) & Auto Voice VLAN, which are best suited for Vo IP & video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data & surveillance video transmission through a single Smart Managed switch, sparing businesses the expense of maintaining expensive dedicated hardware & facilities. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances Vo IP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority & an individual VLAN, these features guarantee the quality & security of Vo IP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice & video packets take precedence over other packets. In addition, with per flow Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority.\n\n Securing Your Network\n D-Link&153;s innovative Safeguard Engine protects the switches against traffic flooding caused by malicious attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers.\n\n The DGS-1510 Series has both MAC & Web-based Access Control supported, these provide a user friendly way to alleviate deployment time, giving customers an effective & efficient authentication choice without the complexity in securing their networks.\n\nin addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network by screening ingress traffic based on any user defined content. The DGS-1510 Series
Includes:: ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Feature Feature Value Switch type Managed Switch layer L3 Quality of Service (Qo S) support Y Basic switching RJ-45 Ethernet ports quantity 24 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x 10G support Y Full duplex Y Auto MDI/MDI-XYMAC address table 16000 entries Switching capacity 92 Gbit/s Throughput 68.45 Mpps Store-&-forward Y Number of static routes 512 Jumbo frames support Y Packet buffer memory 1.5 MBAccess Control List (ACL)YMAC address filtering Y Static port security YSSH/SSL support Y Rack mounting Y Stackable Y Product colour Black LED indicators Y Safetyc UL, CBCertification CE, FCC, C-Tick, VCCI, BSMI, CCCNoise level 47.5 d BAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)24 WPower over Ethernet (Po E)NOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 72.292 BTU/h Width 440 mm Depth 210 mm Height 44 mm Weight 2kg