More From Contributor

£405.45
- Virtual stacking with SIM (Single IP Management).
- Gigabit speeds on all ports.
- More port-count than the standard Smart

...
Archived Product
£206.93
The DGS-1510 Series Gigabit Stackable Smart Managed Switches consists of:\n\n- DGS-1510-20: 20-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (smart fans)\n- DGS-1510-28: 28-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (smart fans)\n- DGS-1510-28X: 28-Port Gigabit Stackable Smart Managed Switch including 4 10G SFP+ (smart fans)\n- DGS-1510-28P: 28-Port Gigabit Stackable Po E Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (24 x Po E ports, smart fans)\n- DGS-1510-52: 52-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (smart fans)\n\n The DGS-1510 Series is D-Link&153;s latest generation of Smart Managed switches with 10G port connectivity, making them ideal for deployment in SME/SMB aggregation environments. The DGS-1510 Series provides a reliable & scalable interconnection between core switches & edge switches with rich capabilities & simplified flexibility. Available in 16, 24 or 48 10/100/1000 Mbps port models, with additional fibre ports for physical stacking & / or uplinks.\n\n The DGS-1510 Series Po E-enabled switches are ideal for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1510-28P 24-port Po E Switch supports up to 30W of power output giving you flexibility in power allocation for a variety of powered devices. This enables you to scale your operations to meet business growth & incorporate new technologies all with affordable installation costs.\n\n 10G SFP+ Stacking/ Uplink Ports\n Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510 Series in a single stack to allow simultaneous & easy configuration, management & troubleshooting. With 20 Gbps full duplex, the DGS-1510 Series offers 10G connectivity to core networks as well as servers with 10G capability while maintaining high performance & minimal impact to the data transfer rates.\n\n Layer 3 Traffic Management\n The DGS-1510 Series provides static route, allowing you to segment your network into workgroups & communicate across VLANs without degrading application performance. With these capabilities, you can boost the efficiency of your network by offloading internal traffic-handling tasks from your router & allowing it to manage external traffic & security.\n\n Extensive Layer 2 Features\n The DGS-1510 Series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, & Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN & automatically shuts down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators & customer service representatives, can quickly discover the type of error on cables as well as determine cable quality.\n\n Traffic Classification & Qo S\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) & Auto Voice VLAN, which are best suited for Vo IP & video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data & surveillance video transmission through a single Smart Managed switch, sparing businesses the expense of maintaining expensive dedicated hardware & facilities. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances Vo IP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority & an individual VLAN, these features guarantee the quality & security of Vo IP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice & video packets take precedence over other packets. In addition, with per flow Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority.\n\n Securing Your Network\n D-Link&153;s innovative Safeguard Engine protects the switches against traffic flooding caused by malicious attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers.\n\n The DGS-1510 Series has both MAC & Web-based Access Control supported, these provide a user friendly way to alleviate deployment time, giving customers an effective & efficient authentication choice without the complexity in securing their networks.\n\nin addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network by screening ingress traffic based on any user defined content. The DGS-1510 Series

Includes::
ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Feature Feature Value Switch type Managed Switch layer L3 Quality of Service (Qo S) support Y Basic switching RJ-45 Ethernet ports quantity 24 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x 10G support Y Full duplex Y Auto MDI/MDI-XYMAC address table 16000 entries Switching capacity 92 Gbit/s Throughput 68.45 Mpps Store-&-forward Y Number of static routes 512 Jumbo frames support Y Packet buffer memory 1.5 MBAccess Control List (ACL)YMAC address filtering Y Static port security YSSH/SSL support Y Rack mounting Y Stackable Y Product colour Black LED indicators Y Safetyc UL, CBCertification CE, FCC, C-Tick, VCCI, BSMI, CCCNoise level 47.5 d BAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)24 WPower over Ethernet (Po E)NOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 72.292 BTU/h Width 440 mm Depth 210 mm Height 44 mm Weight 2kg







...
Available
£206.93
The DGS-1510 Series Gigabit Stackable Smart Managed Switches consists of:\n\n- DGS-1510-20: 20-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (smart fans)\n- DGS-1510-28: 28-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (smart fans)\n- DGS-1510-28X: 28-Port Gigabit Stackable Smart Managed Switch including 4 10G SFP+ (smart fans)\n- DGS-1510-28P: 28-Port Gigabit Stackable Po E Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (24 x Po E ports, smart fans)\n- DGS-1510-52: 52-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (smart fans)\n\n The DGS-1510 Series is D-Link&153;s latest generation of Smart Managed switches with 10G port connectivity, making them ideal for deployment in SME/SMB aggregation environments. The DGS-1510 Series provides a reliable & scalable interconnection between core switches & edge switches with rich capabilities & simplified flexibility. Available in 16, 24 or 48 10/100/1000 Mbps port models, with additional fibre ports for physical stacking & / or uplinks.\n\n The DGS-1510 Series Po E-enabled switches are ideal for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1510-28P 24-port Po E Switch supports up to 30W of power output giving you flexibility in power allocation for a variety of powered devices. This enables you to scale your operations to meet business growth & incorporate new technologies all with affordable installation costs.\n\n 10G SFP+ Stacking/ Uplink Ports\n Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510 Series in a single stack to allow simultaneous & easy configuration, management & troubleshooting. With 20 Gbps full duplex, the DGS-1510 Series offers 10G connectivity to core networks as well as servers with 10G capability while maintaining high performance & minimal impact to the data transfer rates.\n\n Layer 3 Traffic Management\n The DGS-1510 Series provides static route, allowing you to segment your network into workgroups & communicate across VLANs without degrading application performance. With these capabilities, you can boost the efficiency of your network by offloading internal traffic-handling tasks from your router & allowing it to manage external traffic & security.\n\n Extensive Layer 2 Features\n The DGS-1510 Series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, & Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN & automatically shuts down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators & customer service representatives, can quickly discover the type of error on cables as well as determine cable quality.\n\n Traffic Classification & Qo S\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) & Auto Voice VLAN, which are best suited for Vo IP & video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data & surveillance video transmission through a single Smart Managed switch, sparing businesses the expense of maintaining expensive dedicated hardware & facilities. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances Vo IP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority & an individual VLAN, these features guarantee the quality & security of Vo IP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice & video packets take precedence over other packets. In addition, with per flow Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority.\n\n Securing Your Network\n D-Link&153;s innovative Safeguard Engine protects the switches against traffic flooding caused by malicious attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers.\n\n The DGS-1510 Series has both MAC & Web-based Access Control supported, these provide a user friendly way to alleviate deployment time, giving customers an effective & efficient authentication choice without the complexity in securing their networks.\n\nin addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network by screening ingress traffic based on any user defined content. The DGS-1510 Series

Includes::
ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Feature Feature Value Switch type Managed Switch layer L3 Quality of Service (Qo S) support Y Basic switching RJ-45 Ethernet ports quantity 24 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x 10G support Y Full duplex Y Auto MDI/MDI-XYMAC address table 16000 entries Switching capacity 92 Gbit/s Throughput 68.45 Mpps Store-&-forward Y Number of static routes 512 Jumbo frames support Y Packet buffer memory 1.5 MBAccess Control List (ACL)YMAC address filtering Y Static port security YSSH/SSL support Y Rack mounting Y Stackable Y Product colour Black LED indicators Y Safetyc UL, CBCertification CE, FCC, C-Tick, VCCI, BSMI, CCCNoise level 47.5 d BAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)24 WPower over Ethernet (Po E)NOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 72.292 BTU/h Width 440 mm Depth 210 mm Height 44 mm Weight 2kg







...
Available
£206.93
The DGS-1510 Series Gigabit Stackable Smart Managed Switches consists of:\n\n- DGS-1510-20: 20-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (smart fans)\n- DGS-1510-28: 28-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (smart fans)\n- DGS-1510-28X: 28-Port Gigabit Stackable Smart Managed Switch including 4 10G SFP+ (smart fans)\n- DGS-1510-28P: 28-Port Gigabit Stackable Po E Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (24 x Po E ports, smart fans)\n- DGS-1510-52: 52-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (smart fans)\n\n The DGS-1510 Series is D-Link&153;s latest generation of Smart Managed switches with 10G port connectivity, making them ideal for deployment in SME/SMB aggregation environments. The DGS-1510 Series provides a reliable & scalable interconnection between core switches & edge switches with rich capabilities & simplified flexibility. Available in 16, 24 or 48 10/100/1000 Mbps port models, with additional fibre ports for physical stacking & / or uplinks.\n\n The DGS-1510 Series Po E-enabled switches are ideal for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1510-28P 24-port Po E Switch supports up to 30W of power output giving you flexibility in power allocation for a variety of powered devices. This enables you to scale your operations to meet business growth & incorporate new technologies all with affordable installation costs.\n\n 10G SFP+ Stacking/ Uplink Ports\n Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510 Series in a single stack to allow simultaneous & easy configuration, management & troubleshooting. With 20 Gbps full duplex, the DGS-1510 Series offers 10G connectivity to core networks as well as servers with 10G capability while maintaining high performance & minimal impact to the data transfer rates.\n\n Layer 3 Traffic Management\n The DGS-1510 Series provides static route, allowing you to segment your network into workgroups & communicate across VLANs without degrading application performance. With these capabilities, you can boost the efficiency of your network by offloading internal traffic-handling tasks from your router & allowing it to manage external traffic & security.\n\n Extensive Layer 2 Features\n The DGS-1510 Series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, & Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN & automatically shuts down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators & customer service representatives, can quickly discover the type of error on cables as well as determine cable quality.\n\n Traffic Classification & Qo S\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) & Auto Voice VLAN, which are best suited for Vo IP & video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data & surveillance video transmission through a single Smart Managed switch, sparing businesses the expense of maintaining expensive dedicated hardware & facilities. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances Vo IP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority & an individual VLAN, these features guarantee the quality & security of Vo IP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice & video packets take precedence over other packets. In addition, with per flow Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority.\n\n Securing Your Network\n D-Link&153;s innovative Safeguard Engine protects the switches against traffic flooding caused by malicious attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers.\n\n The DGS-1510 Series has both MAC & Web-based Access Control supported, these provide a user friendly way to alleviate deployment time, giving customers an effective & efficient authentication choice without the complexity in securing their networks.\n\nin addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network by screening ingress traffic based on any user defined content. The DGS-1510 Series

Includes::
ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Feature Feature Value Switch type Managed Switch layer L3 Quality of Service (Qo S) support Y Basic switching RJ-45 Ethernet ports quantity 24 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x 10G support Y Full duplex Y Auto MDI/MDI-XYMAC address table 16000 entries Switching capacity 92 Gbit/s Throughput 68.45 Mpps Store-&-forward Y Number of static routes 512 Jumbo frames support Y Packet buffer memory 1.5 MBAccess Control List (ACL)YMAC address filtering Y Static port security YSSH/SSL support Y Rack mounting Y Stackable Y Product colour Black LED indicators Y Safetyc UL, CBCertification CE, FCC, C-Tick, VCCI, BSMI, CCCNoise level 47.5 d BAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)24 WPower over Ethernet (Po E)NOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 72.292 BTU/h Width 440 mm Depth 210 mm Height 44 mm Weight 2kg







...
Available
£206.93
The DGS-1510 Series Gigabit Stackable Smart Managed Switches consists of:\n\n- DGS-1510-20: 20-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (smart fans)\n- DGS-1510-28: 28-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (smart fans)\n- DGS-1510-28X: 28-Port Gigabit Stackable Smart Managed Switch including 4 10G SFP+ (smart fans)\n- DGS-1510-28P: 28-Port Gigabit Stackable Po E Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (24 x Po E ports, smart fans)\n- DGS-1510-52: 52-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ & 2 SFP ports (smart fans)\n\n The DGS-1510 Series is D-Link&153;s latest generation of Smart Managed switches with 10G port connectivity, making them ideal for deployment in SME/SMB aggregation environments. The DGS-1510 Series provides a reliable & scalable interconnection between core switches & edge switches with rich capabilities & simplified flexibility. Available in 16, 24 or 48 10/100/1000 Mbps port models, with additional fibre ports for physical stacking & / or uplinks.\n\n The DGS-1510 Series Po E-enabled switches are ideal for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1510-28P 24-port Po E Switch supports up to 30W of power output giving you flexibility in power allocation for a variety of powered devices. This enables you to scale your operations to meet business growth & incorporate new technologies all with affordable installation costs.\n\n 10G SFP+ Stacking/ Uplink Ports\n Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510 Series in a single stack to allow simultaneous & easy configuration, management & troubleshooting. With 20 Gbps full duplex, the DGS-1510 Series offers 10G connectivity to core networks as well as servers with 10G capability while maintaining high performance & minimal impact to the data transfer rates.\n\n Layer 3 Traffic Management\n The DGS-1510 Series provides static route, allowing you to segment your network into workgroups & communicate across VLANs without degrading application performance. With these capabilities, you can boost the efficiency of your network by offloading internal traffic-handling tasks from your router & allowing it to manage external traffic & security.\n\n Extensive Layer 2 Features\n The DGS-1510 Series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, & Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN & automatically shuts down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators & customer service representatives, can quickly discover the type of error on cables as well as determine cable quality.\n\n Traffic Classification & Qo S\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) & Auto Voice VLAN, which are best suited for Vo IP & video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data & surveillance video transmission through a single Smart Managed switch, sparing businesses the expense of maintaining expensive dedicated hardware & facilities. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances Vo IP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority & an individual VLAN, these features guarantee the quality & security of Vo IP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice & video packets take precedence over other packets. In addition, with per flow Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority.\n\n Securing Your Network\n D-Link&153;s innovative Safeguard Engine protects the switches against traffic flooding caused by malicious attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers.\n\n The DGS-1510 Series has both MAC & Web-based Access Control supported, these provide a user friendly way to alleviate deployment time, giving customers an effective & efficient authentication choice without the complexity in securing their networks.\n\nin addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network by screening ingress traffic based on any user defined content. The DGS-1510 Series

Includes::
ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Feature Feature Value Switch type Managed Switch layer L3 Quality of Service (Qo S) support Y Basic switching RJ-45 Ethernet ports quantity 24 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x 10G support Y Full duplex Y Auto MDI/MDI-XYMAC address table 16000 entries Switching capacity 92 Gbit/s Throughput 68.45 Mpps Store-&-forward Y Number of static routes 512 Jumbo frames support Y Packet buffer memory 1.5 MBAccess Control List (ACL)YMAC address filtering Y Static port security YSSH/SSL support Y Rack mounting Y Stackable Y Product colour Black LED indicators Y Safetyc UL, CBCertification CE, FCC, C-Tick, VCCI, BSMI, CCCNoise level 47.5 d BAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)24 WPower over Ethernet (Po E)NOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 72.292 BTU/h Width 440 mm Depth 210 mm Height 44 mm Weight 2kg







...
Available
£676.52
The D-Link DGS-1510 Series is the latest generation of Smart Managed switches with 10G capability, available with 16, 24, or 48 10/100/1000 Mbps ports plus additional fibre ports for physical stacking or uplinks. The Po E-capable DGS-1510-28P & DGS-1510-28XMP switches provide additional flexibility for businesses looking to power IP phones, wireless access points, or IP cameras using existing network infrastructure. The combination of high bandwidth connections & Po E support make the DGS-1510 Series ideal for Small-Medium Enterprise (SME) & Small-Medium Business (SMB) environments.\n\n 10G SFP+ Stacking/ Uplink Ports\n\n The last two SFP+ ports of the DGS-1510 Series switches allow users to create a physical stack of up to 6 units in a fault-tolerant ring or linear topology using Direct Attach Cables (DACs) or any compatible SFP+ transceiver 1. This creates a total of 288 Gigabit ports, ensuring high bandwidth while staying cost-efficient. Meanwhile, the remaining uplink ports can be used for other functions, such as connecting to a larger network. Users can also easily configure & manage any of the DGS-1510 Series Smart Managed switches in a single stack. With 20 Gbps full-duplex capabilities, the DGS-1510 Series offers 10G connectivity to core networks & servers while still maintaining fast data transfer rates.\n\n Layer 3 Traffic Management\n\n The DGS-1510 Series provides static routing, allowing you to segment your network into workgroups that communicate between VLANs & increase application performance. With these capabilities, you can reduce the load on your core devices, allowing you to create a scalable & efficient network. \n\n Extensive Layer 2 Features\n\n The DGS-1510 Series switches are equipped with a complete line-up of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree, & Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection automatically detects & shuts down loops created by a specific port or VLAN. The Cable Diagnostics feature, designed primarily for administrators & customer service representatives, can determine cable quality & can quickly discover sections of cabling that need to be replaced.\n\n Traffic Classification & Qo S\n\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) & Auto Voice VLAN, which are best suited for Vo IP & video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart switches. This technology consolidates data & surveillance video transmissions through a single DGS-1510 Series Smart Managed switch, saving businesses the costs of maintaining expensive dedicated hardware & infrastructure. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data by giving ASV traffic priority over other packets.\n\n Keep Your Network Secure\n\n D-Link&153;s innovative Safeguard Engine protects the DGS-1510 Series against traffic flooding caused by malicious attacks. The DGS-1510 Series supports both MAC & web-based access control. This gives network administrators multiple authentication options, reducing deployment times & removing the need for client software. The DGS-1510 Series supports IEEE 802.1X port-based authentication, allowing network users to be authenticated through external RADIUS servers. The Address Resolution Protocol (ARP) Spoofing Prevention feature helps to prevent attacks that may allow an intruder to intercept users&153; traffic while the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment.\n\n I Pv 6 Ready\n\n The DGS-1510 Series is IPv 6 ready & supports various IPv 6 functions such as MLD Snooping, IPv 6 security features, & IPv 6 Quality of Service (Qo S), ensuring seamless integration with next generation networks. The DGS-1510 Series also supports IPv 4/v 6 dual stack functionality, which allows the switches to act as a bridge between IPv 4 & IPv 6 networks.\n 1 When stacking in a linear typology, the remaining unused SFP+ ports in the stacking port pair of the top & bottom switches will also be considered occupied by the switch & cannot be used for any other purpose. Feature Feature Value Switch type Managed Switch layer L2/L3 Quality of Service (Qo S) support Y Traffic classification Y System event log Y Basic switching RJ-45 Ethernet ports quantity 24 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Fiber optic connector SFP+ Networking standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x 10G support Y Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TCable types supported Cat 5, Cat 5e Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Broadcast storm control Y Auto MDI/MDI-XYSpanning tree protocol Y Head-of-line (HOL) blocking Y Auto-negotiation YMAC address auto-learning supported YVLAN support Y Virtual LAN features Tagged VLAN, Protocol-based VLANNumber of VLANs 4094MAC address table 16384 entries Switching capacity 128 Gbit/s Throughput 95.24 Mpps Store-&-forward Y Number of queues 8 Jumbo frames support Y Jumbo frames 9216 Packet buffer memory 1.5 MBDHCP features DHCP server, DHCP client Access Control List (ACL)YAccess Control List (ACL) rules 768IGMP snooping Y Security algorithms 802.1x RADIUS, EAP, SNMP, SSH, SSH-2, SSL/TLSSSH/SSL support YBPDU filtering/protection Y Authentication MAC-based authentication, Port-based authentication Multicast support Y Stackable Y Product colour Black, Grey LED indicators Activity, Link, Po E, Power, Speed Number of fans 2 fan (s) Safetyc UL, CBCertification CE, FCC, C-Tick, VCCI, BSMI, CCCPhysical stacking (units)6 Virtual stacking (units)32 Noise level 56.9 d BAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (max)436.3 WPower over Ethernet (Po E)YPower over Ethernet (Po E) ports quantity 24 Power over Ethernet (Po E) power per port 30 WTotal Power over Ethernet (Po E) budget 370 WOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 1487.78 BTU/h Width 440 mm Depth 308 mm Height 44 mm Weight 4.25kg





...
Available
£676.52
The D-Link DGS-1510 Series is the latest generation of Smart Managed switches with 10G capability, available with 16, 24, or 48 10/100/1000 Mbps ports plus additional fibre ports for physical stacking or uplinks. The Po E-capable DGS-1510-28P & DGS-1510-28XMP switches provide additional flexibility for businesses looking to power IP phones, wireless access points, or IP cameras using existing network infrastructure. The combination of high bandwidth connections & Po E support make the DGS-1510 Series ideal for Small-Medium Enterprise (SME) & Small-Medium Business (SMB) environments.\n\n 10G SFP+ Stacking/ Uplink Ports\n\n The last two SFP+ ports of the DGS-1510 Series switches allow users to create a physical stack of up to 6 units in a fault-tolerant ring or linear topology using Direct Attach Cables (DACs) or any compatible SFP+ transceiver 1. This creates a total of 288 Gigabit ports, ensuring high bandwidth while staying cost-efficient. Meanwhile, the remaining uplink ports can be used for other functions, such as connecting to a larger network. Users can also easily configure & manage any of the DGS-1510 Series Smart Managed switches in a single stack. With 20 Gbps full-duplex capabilities, the DGS-1510 Series offers 10G connectivity to core networks & servers while still maintaining fast data transfer rates.\n\n Layer 3 Traffic Management\n\n The DGS-1510 Series provides static routing, allowing you to segment your network into workgroups that communicate between VLANs & increase application performance. With these capabilities, you can reduce the load on your core devices, allowing you to create a scalable & efficient network. \n\n Extensive Layer 2 Features\n\n The DGS-1510 Series switches are equipped with a complete line-up of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree, & Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection automatically detects & shuts down loops created by a specific port or VLAN. The Cable Diagnostics feature, designed primarily for administrators & customer service representatives, can determine cable quality & can quickly discover sections of cabling that need to be replaced.\n\n Traffic Classification & Qo S\n\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) & Auto Voice VLAN, which are best suited for Vo IP & video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart switches. This technology consolidates data & surveillance video transmissions through a single DGS-1510 Series Smart Managed switch, saving businesses the costs of maintaining expensive dedicated hardware & infrastructure. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data by giving ASV traffic priority over other packets.\n\n Keep Your Network Secure\n\n D-Link&153;s innovative Safeguard Engine protects the DGS-1510 Series against traffic flooding caused by malicious attacks. The DGS-1510 Series supports both MAC & web-based access control. This gives network administrators multiple authentication options, reducing deployment times & removing the need for client software. The DGS-1510 Series supports IEEE 802.1X port-based authentication, allowing network users to be authenticated through external RADIUS servers. The Address Resolution Protocol (ARP) Spoofing Prevention feature helps to prevent attacks that may allow an intruder to intercept users&153; traffic while the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment.\n\n I Pv 6 Ready\n\n The DGS-1510 Series is IPv 6 ready & supports various IPv 6 functions such as MLD Snooping, IPv 6 security features, & IPv 6 Quality of Service (Qo S), ensuring seamless integration with next generation networks. The DGS-1510 Series also supports IPv 4/v 6 dual stack functionality, which allows the switches to act as a bridge between IPv 4 & IPv 6 networks.\n 1 When stacking in a linear typology, the remaining unused SFP+ ports in the stacking port pair of the top & bottom switches will also be considered occupied by the switch & cannot be used for any other purpose. Feature Feature Value Switch type Managed Switch layer L2/L3 Quality of Service (Qo S) support Y Traffic classification Y System event log Y Basic switching RJ-45 Ethernet ports quantity 24 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Fiber optic connector SFP+ Networking standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x 10G support Y Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TCable types supported Cat 5, Cat 5e Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Broadcast storm control Y Auto MDI/MDI-XYSpanning tree protocol Y Head-of-line (HOL) blocking Y Auto-negotiation YMAC address auto-learning supported YVLAN support Y Virtual LAN features Tagged VLAN, Protocol-based VLANNumber of VLANs 4094MAC address table 16384 entries Switching capacity 128 Gbit/s Throughput 95.24 Mpps Store-&-forward Y Number of queues 8 Jumbo frames support Y Jumbo frames 9216 Packet buffer memory 1.5 MBDHCP features DHCP server, DHCP client Access Control List (ACL)YAccess Control List (ACL) rules 768IGMP snooping Y Security algorithms 802.1x RADIUS, EAP, SNMP, SSH, SSH-2, SSL/TLSSSH/SSL support YBPDU filtering/protection Y Authentication MAC-based authentication, Port-based authentication Multicast support Y Stackable Y Product colour Black, Grey LED indicators Activity, Link, Po E, Power, Speed Number of fans 2 fan (s) Safetyc UL, CBCertification CE, FCC, C-Tick, VCCI, BSMI, CCCPhysical stacking (units)6 Virtual stacking (units)32 Noise level 56.9 d BAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (max)436.3 WPower over Ethernet (Po E)YPower over Ethernet (Po E) ports quantity 24 Power over Ethernet (Po E) power per port 30 WTotal Power over Ethernet (Po E) budget 370 WOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 1487.78 BTU/h Width 440 mm Depth 308 mm Height 44 mm Weight 4.25kg





...
Available
£490.74
Overview\n The DGS-1510 Series is D-Link&153;s latest generation of Smart Pro switches with 10G port connectivity, making them ideal for deployment in SME/SMB core environments. The DGS-1510 Series provides a reliable, scalable, & modular interconnection between core switches & edge switches with rich capabilities & simplified flexibility. Available in 16, 24 & 48 10/100/1000 Mbps port models, these switches also include four optical ports " including 2 Gigabit SFP & 2 10G SFP+ ports. The 24 & 48 port versions are also available with 4 10G SFP+ ports instead of the 2 Gigabit plus 2 10G configuration.\n\n 10G SFP+ Stacking/ Uplink Ports\n Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510 Smart Pro series in a single stack to allow simultaneous & easy configuration, management & troubleshooting.\n\n Flexibility & Scalability\n The DGS-1510 Series supports virtual stacking via D-Link&153;s Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth dem&. SIM reduces the number of IP address needed in the network & allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialized stacking cables & removes distance barriers that can limit topology options when using other stacking technology.\n\n Extensive Layer 2 Features\n The DGS-1510 Series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, & Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN & automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators & customer service representatives, can quickly discover the type of error on cables & determine the cable quality.\n\n Qo S, Bandwidth Control\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) & Auto Voice VLAN, which are best suited for Vo IP & video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data & surveillance video transmission through a single Smart Pro switch, sparing businesses the expense of maintaining expensive dedicated hardware & facilities. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances Vo IP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority & an individual VLAN, these features guarantee the quality & security of Vo IP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice & video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority.\n\n Secure your Network\n D-Link&153;s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 Series

Includes::
ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment.\n\n I Pv 6 Ready\n The DGS-1510 Series is IPv 6 ready & supports various IPv 6 functions such as MLD Snooping, IPv 6 ACL/ Qo S, & IMPBv 6 to ensure seamless integration of next generation networks. The DGS-1510 Series also supports a IPv 4/v 6 dual stack function that allows the switch to act as a bridge between IPv 4 & IPv 6 networks. Finally, all DGS-1510 Series are certified to be IPv 6 Ready Logo Phase 2, which guarantees interoperability for IPv 6 environments.\n\n Versatile Management\n The DGS-1510 Series provides a D-Link Network Assistant Utility & a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link Smart Pro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the Smart Pro Switches. Switches within the same L2 network segment that are connected to the user&153;s PC are displayed on screen for instant access. This allows extensive switch configuration & basic setup of discovered devices including password changes & firmware upgrades. The DGS-1510 Series also supports D-View 6.0 & a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, & security. CLI management of the switches is possible via console port & Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, & firmware with ease.\n\n Layer 3 Traffic Management\n The DGS-1510 Series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster & more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only.\n\n Energy Saving\n DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, & system hibernation based on custom scheduling profiles. The profiles can also be applied to the Po E switch so that there is no unnecessary power consumption during off hours. Feature Feature Value Switch type Managed Switch layer L3 Quality of Service (Qo S) support Y Web-based management Y Basic switching RJ-45 Ethernet ports quantity 48 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x 10G support Y Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Broadcast storm control Y Auto MDI/MDI-XYHead-of-line (HOL) blocking YVLAN support YMAC address table 16000 entries Switching capacity 176 Gbit/s Throughput 130.95 Mpps Store-&-forward Y Packet buffer memory 3 MBDHCP features DHCP server, DHCP client Access Control List (ACL)YIGMP snooping YMAC address filtering YSSH/SSL support Y Multicast support Y Rack mounting Y Stackable Y Product colour Black Form factor 1ULED indicators Activity, Link, Power Number of fans 2 fan (s) Safetyc UL, CBCertification CE, FCC, C-Tick, VCCI, BSMI, CCCNoise level 45.8 d BAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (max)44.2 WPower over Ethernet (Po E)NOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 138.8 BTU/h Width 440 mm Depth 250 mm Height 44 mm Weight 5.3kg







...
Available
£490.74
Overview\n The DGS-1510 Series is D-Link&153;s latest generation of Smart Pro switches with 10G port connectivity, making them ideal for deployment in SME/SMB core environments. The DGS-1510 Series provides a reliable, scalable, & modular interconnection between core switches & edge switches with rich capabilities & simplified flexibility. Available in 16, 24 & 48 10/100/1000 Mbps port models, these switches also include four optical ports " including 2 Gigabit SFP & 2 10G SFP+ ports. The 24 & 48 port versions are also available with 4 10G SFP+ ports instead of the 2 Gigabit plus 2 10G configuration.\n\n 10G SFP+ Stacking/ Uplink Ports\n Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510 Smart Pro series in a single stack to allow simultaneous & easy configuration, management & troubleshooting.\n\n Flexibility & Scalability\n The DGS-1510 Series supports virtual stacking via D-Link&153;s Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth dem&. SIM reduces the number of IP address needed in the network & allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialized stacking cables & removes distance barriers that can limit topology options when using other stacking technology.\n\n Extensive Layer 2 Features\n The DGS-1510 Series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, & Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN & automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators & customer service representatives, can quickly discover the type of error on cables & determine the cable quality.\n\n Qo S, Bandwidth Control\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) & Auto Voice VLAN, which are best suited for Vo IP & video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data & surveillance video transmission through a single Smart Pro switch, sparing businesses the expense of maintaining expensive dedicated hardware & facilities. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances Vo IP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority & an individual VLAN, these features guarantee the quality & security of Vo IP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice & video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority.\n\n Secure your Network\n D-Link&153;s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 Series

Includes::
ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment.\n\n I Pv 6 Ready\n The DGS-1510 Series is IPv 6 ready & supports various IPv 6 functions such as MLD Snooping, IPv 6 ACL/ Qo S, & IMPBv 6 to ensure seamless integration of next generation networks. The DGS-1510 Series also supports a IPv 4/v 6 dual stack function that allows the switch to act as a bridge between IPv 4 & IPv 6 networks. Finally, all DGS-1510 Series are certified to be IPv 6 Ready Logo Phase 2, which guarantees interoperability for IPv 6 environments.\n\n Versatile Management\n The DGS-1510 Series provides a D-Link Network Assistant Utility & a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link Smart Pro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the Smart Pro Switches. Switches within the same L2 network segment that are connected to the user&153;s PC are displayed on screen for instant access. This allows extensive switch configuration & basic setup of discovered devices including password changes & firmware upgrades. The DGS-1510 Series also supports D-View 6.0 & a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, & security. CLI management of the switches is possible via console port & Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, & firmware with ease.\n\n Layer 3 Traffic Management\n The DGS-1510 Series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster & more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only.\n\n Energy Saving\n DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, & system hibernation based on custom scheduling profiles. The profiles can also be applied to the Po E switch so that there is no unnecessary power consumption during off hours. Feature Feature Value Switch type Managed Switch layer L3 Quality of Service (Qo S) support Y Web-based management Y Basic switching RJ-45 Ethernet ports quantity 48 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x 10G support Y Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Broadcast storm control Y Auto MDI/MDI-XYHead-of-line (HOL) blocking YVLAN support YMAC address table 16000 entries Switching capacity 176 Gbit/s Throughput 130.95 Mpps Store-&-forward Y Packet buffer memory 3 MBDHCP features DHCP server, DHCP client Access Control List (ACL)YIGMP snooping YMAC address filtering YSSH/SSL support Y Multicast support Y Rack mounting Y Stackable Y Product colour Black Form factor 1ULED indicators Activity, Link, Power Number of fans 2 fan (s) Safetyc UL, CBCertification CE, FCC, C-Tick, VCCI, BSMI, CCCNoise level 45.8 d BAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (max)44.2 WPower over Ethernet (Po E)NOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 138.8 BTU/h Width 440 mm Depth 250 mm Height 44 mm Weight 5.3kg







...
Available
£490.74
Overview\n The DGS-1510 Series is D-Link&153;s latest generation of Smart Pro switches with 10G port connectivity, making them ideal for deployment in SME/SMB core environments. The DGS-1510 Series provides a reliable, scalable, & modular interconnection between core switches & edge switches with rich capabilities & simplified flexibility. Available in 16, 24 & 48 10/100/1000 Mbps port models, these switches also include four optical ports " including 2 Gigabit SFP & 2 10G SFP+ ports. The 24 & 48 port versions are also available with 4 10G SFP+ ports instead of the 2 Gigabit plus 2 10G configuration.\n\n 10G SFP+ Stacking/ Uplink Ports\n Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510 Smart Pro series in a single stack to allow simultaneous & easy configuration, management & troubleshooting.\n\n Flexibility & Scalability\n The DGS-1510 Series supports virtual stacking via D-Link&153;s Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth dem&. SIM reduces the number of IP address needed in the network & allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialized stacking cables & removes distance barriers that can limit topology options when using other stacking technology.\n\n Extensive Layer 2 Features\n The DGS-1510 Series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, & Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN & automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators & customer service representatives, can quickly discover the type of error on cables & determine the cable quality.\n\n Qo S, Bandwidth Control\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) & Auto Voice VLAN, which are best suited for Vo IP & video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data & surveillance video transmission through a single Smart Pro switch, sparing businesses the expense of maintaining expensive dedicated hardware & facilities. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances Vo IP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority & an individual VLAN, these features guarantee the quality & security of Vo IP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice & video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority.\n\n Secure your Network\n D-Link&153;s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 Series

Includes::
ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment.\n\n I Pv 6 Ready\n The DGS-1510 Series is IPv 6 ready & supports various IPv 6 functions such as MLD Snooping, IPv 6 ACL/ Qo S, & IMPBv 6 to ensure seamless integration of next generation networks. The DGS-1510 Series also supports a IPv 4/v 6 dual stack function that allows the switch to act as a bridge between IPv 4 & IPv 6 networks. Finally, all DGS-1510 Series are certified to be IPv 6 Ready Logo Phase 2, which guarantees interoperability for IPv 6 environments.\n\n Versatile Management\n The DGS-1510 Series provides a D-Link Network Assistant Utility & a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link Smart Pro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the Smart Pro Switches. Switches within the same L2 network segment that are connected to the user&153;s PC are displayed on screen for instant access. This allows extensive switch configuration & basic setup of discovered devices including password changes & firmware upgrades. The DGS-1510 Series also supports D-View 6.0 & a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, & security. CLI management of the switches is possible via console port & Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, & firmware with ease.\n\n Layer 3 Traffic Management\n The DGS-1510 Series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster & more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only.\n\n Energy Saving\n DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, & system hibernation based on custom scheduling profiles. The profiles can also be applied to the Po E switch so that there is no unnecessary power consumption during off hours. Feature Feature Value Switch type Managed Switch layer L3 Quality of Service (Qo S) support Y Web-based management Y Basic switching RJ-45 Ethernet ports quantity 48 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Power connector DC-in jack Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x 10G support Y Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Broadcast storm control Y Auto MDI/MDI-XYHead-of-line (HOL) blocking YVLAN support YMAC address table 16000 entries Switching capacity 176 Gbit/s Throughput 130.95 Mpps Store-&-forward Y Packet buffer memory 3 MBDHCP features DHCP server, DHCP client Access Control List (ACL)YIGMP snooping YMAC address filtering YSSH/SSL support Y Multicast support Y Rack mounting Y Stackable Y Product colour Black Form factor 1ULED indicators Activity, Link, Power Number of fans 2 fan (s) Safetyc UL, CBCertification CE, FCC, C-Tick, VCCI, BSMI, CCCNoise level 45.8 d BAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (max)44.2 WPower over Ethernet (Po E)NOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 138.8 BTU/h Width 440 mm Depth 250 mm Height 44 mm Weight 5.3kg







...
Available

D-Link DGS-1510-28XMP Network Switch Managed L2/L3 Gigabit Ethernet
(10/100/1000) Black, Grey Power Over Ethernet (PoE)

The D-Link DGS-1510 Series is the latest generation of Smart Managed switches with 10G capability, available with 16, 24, or 48 10/100/1000 Mbps ports plus additional fibre ports for physical stacking or uplinks. The PoE-capable DGS-1510-28P and DGS-1510-28XMP switches provide additional flexibility for businesses looking to power IP phones, wireless access points, or IP cameras using existing network infrastructure. The combination of high bandwidth connections and PoE support make the DGS-1510 Series ideal for Small-Medium Enterprise (SME) and Small-Medium Business (SMB) environments.\n\n10G SFP+ Stacking/Uplink Ports\n\n The last two SFP+ ports of the DGS-1510 Series switches allow users to create a physical stack of up to 6 units in a fault-tolerant ring or linear topology using
Direct Attach Cables (DACs) or any compatible SFP+ transceiver1. This creates a total of 288 Gigabit ports, ensuring high bandwidth while staying cost-efficient. Meanwhile, the remaining uplink ports can be used for other functions, such as connecting to a larger network. Users can also easily configure and manage any of the DGS-1510 Series Smart Managed switches in a single stack. With 20 Gbps full-duplex capabilities, the DGS-1510 Series offers 10G connectivity to core networks and servers while still maintaining fast data transfer rates.\n\nLayer 3 Traffic Management\n\n The DGS-1510 Series provides static routing, allowing you to segment your network into workgroups that communicate between VLANs and increase application performance. With these capabilities, you can reduce the
load on your core devices, allowing you to create a scalable and efficient network. \n\nExtensive Layer 2 Features\n\n The DGS-1510 Series switches are equipped with a complete line-up of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection automatically detects and shuts down loops created by a specific port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can determine cable quality and can quickly discover sections of cabling that need
to be replaced.\n\nTraffic Classification & QoS\n\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart switches. This technology consolidates data and surveillance video transmissions through a single DGS-1510 Series Smart Managed switch, saving businesses the costs of maintaining expensive dedicated hardware and infrastructure. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data by giving ASV traffic priority over other packets.\n\nKeep Your Network Secure\n\n D-Link&153;s innovative Safeguard Engine protects the
DGS-1510 Series against traffic flooding caused by malicious attacks. The DGS-1510 Series supports both MAC and web-based access control. This gives network administrators multiple authentication options, reducing deployment times and removing the need for client software. The DGS-1510 Series supports IEEE 802.1X port-based authentication, allowing network users to be authenticated through external RADIUS servers. The Address Resolution Protocol (ARP) Spoofing Prevention feature helps to prevent attacks that may allow an intruder to intercept users&153; traffic while the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment.\n\nIPv6 Ready\n\nThe DGS-1510 Series is IPv6 ready and supports various IPv6 functions such as MLD
Snooping, IPv6 security features, and IPv6 Quality of Service (QoS), ensuring seamless integration with next generation networks. The DGS-1510 Series also supports IPv4/v6 dual stack functionality, which allows the switches to act as a bridge between IPv4 and IPv6 networks.\n1 When stacking in a linear typology, the remaining unused SFP+ ports in the stacking port pair of the top and bottom switches will also be considered occupied by the switch and cannot be used for any other purpose.FeatureFeature ValueSwitch typeManagedSwitch layerL2/L3Quality of Service (QoS) supportYTraffic classificationYSystem event logYBasic switching RJ-45 Ethernet ports quantity24Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)SFP+ module slots quantity4Fiber optic
connectorSFP+Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x10G supportYCopper ethernet cabling technology10BASE-T, 100BASE-TX, 1000BASE-TCable types supportedCat5, Cat5ePort mirroringYFull duplexYFlow control supportYLink aggregationYBroadcast storm controlYAuto MDI/MDI-XYSpanning tree protocolYHead-of-line (HOL) blockingYAuto-negotiationYMAC address auto-learning supportedYVLAN supportYVirtual LAN featuresTagged VLAN, Protocol-based VLANNumber of VLANs4094MAC address table16384 entriesSwitching capacity128 Gbit/sThroughput95.24 MppsStore-and-forwardYNumber of queues8Jumbo frames supportYJumbo frames9216Packet buffer memory1.5 MBDHCP featuresDHCP
server, DHCP clientAccess Control List (ACL)YAccess Control List (ACL) rules768IGMP snoopingYSecurity algorithms802.1x RADIUS, EAP, SNMP, SSH, SSH-2, SSL/TLSSSH/SSL supportYBPDU filtering/protectionYAuthenticationMAC-based authentication, Port-based authenticationMulticast supportYStackableYProduct colourBlack, GreyLED indicatorsActivity, Link, PoE, Power, SpeedNumber of fans2 fan(s)SafetycUL, CBCertificationCE, FCC, C-Tick, VCCI, BSMI, CCCPhysical stacking (units)6Virtual stacking (units)32Noise level56.9 dBAC input voltage100 - 240 VAC input frequency50 - 60 HzPower consumption (max)436.3 WPower over Ethernet (PoE)YPower over Ethernet (PoE) ports quantity24Power over Ethernet (PoE) power per port30 WTotal Power over Ethernet (PoE) budget370 WOperating temperature (T-T)-5 - 50
&176;CStorage temperature (T-T)-20 - 70 &176;COperating relative humidity (H-H)0 - 95%Storage relative humidity (H-H)0 - 95%Heat dissipation1487.78 BTU/hWidth440 mmDepth308 mmHeight44 mmWeight4.25 kg
Availability: In Stock
£676.52

Product Description

The D-Link DGS-1510 Series is the latest generation of Smart Managed switches with 10G capability, available with 16, 24, or 48 10/100/1000 Mbps ports plus additional fibre ports for physical stacking or uplinks. The Po E-capable DGS-1510-28P & DGS-1510-28XMP switches provide additional flexibility for businesses looking to power IP phones, wireless access points, or IP cameras using existing network infrastructure. The combination of high bandwidth connections & Po E support make the DGS-1510 Series ideal for Small-Medium Enterprise (SME) & Small-Medium Business (SMB) environments.\n\n 10G SFP+ Stacking/ Uplink Ports\n\n The last two SFP+ ports of the DGS-1510 Series switches allow users to create a physical stack of up to 6 units in a fault-tolerant ring or linear topology using Direct Attach Cables (DACs) or any compatible SFP+ transceiver 1. This creates a total of 288 Gigabit ports, ensuring high bandwidth while staying cost-efficient. Meanwhile, the remaining uplink ports can be used for other functions, such as connecting to a larger network. Users can also easily configure & manage any of the DGS-1510 Series Smart Managed switches in a single stack. With 20 Gbps full-duplex capabilities, the DGS-1510 Series offers 10G connectivity to core networks & servers while still maintaining fast data transfer rates.\n\n Layer 3 Traffic Management\n\n The DGS-1510 Series provides static routing, allowing you to segment your network into workgroups that communicate between VLANs & increase application performance. With these capabilities, you can reduce the load on your core devices, allowing you to create a scalable & efficient network. \n\n Extensive Layer 2 Features\n\n The DGS-1510 Series switches are equipped with a complete line-up of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree, & Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection automatically detects & shuts down loops created by a specific port or VLAN. The Cable Diagnostics feature, designed primarily for administrators & customer service representatives, can determine cable quality & can quickly discover sections of cabling that need to be replaced.\n\n Traffic Classification & Qo S\n\n The DGS-1510 Series supports Auto Surveillance VLAN (ASV) & Auto Voice VLAN, which are best suited for Vo IP & video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart switches. This technology consolidates data & surveillance video transmissions through a single DGS-1510 Series Smart Managed switch, saving businesses the costs of maintaining expensive dedicated hardware & infrastructure. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data by giving ASV traffic priority over other packets.\n\n Keep Your Network Secure\n\n D-Link&153;s innovative Safeguard Engine protects the DGS-1510 Series against traffic flooding caused by malicious attacks. The DGS-1510 Series supports both MAC & web-based access control. This gives network administrators multiple authentication options, reducing deployment times & removing the need for client software. The DGS-1510 Series supports IEEE 802.1X port-based authentication, allowing network users to be authenticated through external RADIUS servers. The Address Resolution Protocol (ARP) Spoofing Prevention feature helps to prevent attacks that may allow an intruder to intercept users&153; traffic while the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment.\n\n I Pv 6 Ready\n\n The DGS-1510 Series is IPv 6 ready & supports various IPv 6 functions such as MLD Snooping, IPv 6 security features, & IPv 6 Quality of Service (Qo S), ensuring seamless integration with next generation networks. The DGS-1510 Series also supports IPv 4/v 6 dual stack functionality, which allows the switches to act as a bridge between IPv 4 & IPv 6 networks.\n 1 When stacking in a linear typology, the remaining unused SFP+ ports in the stacking port pair of the top & bottom switches will also be considered occupied by the switch & cannot be used for any other purpose. Feature Feature Value Switch type Managed Switch layer L2/L3 Quality of Service (Qo S) support Y Traffic classification Y System event log Y Basic switching RJ-45 Ethernet ports quantity 24 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)SFP+ module slots quantity 4 Fiber optic connector SFP+ Networking standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x 10G support Y Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TCable types supported Cat 5, Cat 5e Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Broadcast storm control Y Auto MDI/MDI-XYSpanning tree protocol Y Head-of-line (HOL) blocking Y Auto-negotiation YMAC address auto-learning supported YVLAN support Y Virtual LAN features Tagged VLAN, Protocol-based VLANNumber of VLANs 4094MAC address table 16384 entries Switching capacity 128 Gbit/s Throughput 95.24 Mpps Store-&-forward Y Number of queues 8 Jumbo frames support Y Jumbo frames 9216 Packet buffer memory 1.5 MBDHCP features DHCP server, DHCP client Access Control List (ACL)YAccess Control List (ACL) rules 768IGMP snooping Y Security algorithms 802.1x RADIUS, EAP, SNMP, SSH, SSH-2, SSL/TLSSSH/SSL support YBPDU filtering/protection Y Authentication MAC-based authentication, Port-based authentication Multicast support Y Stackable Y Product colour Black, Grey LED indicators Activity, Link, Po E, Power, Speed Number of fans 2 fan (s) Safetyc UL, CBCertification CE, FCC, C-Tick, VCCI, BSMI, CCCPhysical stacking (units)6 Virtual stacking (units)32 Noise level 56.9 d BAC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (max)436.3 WPower over Ethernet (Po E)YPower over Ethernet (Po E) ports quantity 24 Power over Ethernet (Po E) power per port 30 WTotal Power over Ethernet (Po E) budget 370 WOperating temperature (T-T)-5
- 50 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Heat dissipation 1487.78 BTU/h Width 440 mm Depth 308 mm Height 44 mm Weight 4.25kg

Reviews/Comments

Add New

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

LAN - Local Area Network
Black - A colour which does not emit any colour of the spectrum. Black absorbs all frequencies of the spectrum.
Engine - A machine designed to convert fuel into motion
Grey - A colour often associated with old age (going grey)
Resolution - The number of pixels a device can display
Heat - A term used to define thermal energy
Cable - A series of wires bonded to form a single thread
Physical - Used to describe strength or visual properties of an item
Gigabit Ethernet - Also known as GbE or 1 GigE, a network standard which transfers date at one gigabit per second.
Quality - An object that has quality is superior in function and finish than a less quality object.
% - How much of one item out of the total.
Network - A link and communication between things. Often computers or people.
Small - something that takes up less space than normal.
Learning - Educating and growing in intelligence.
Layer - Adding extra quantities of materials for extra practical benefits, e.g. warmth.
Reliable - Something that is consistently good and can be trusted.
Innovative - An idea that shows new method and ways of thinking, an original design.
Feature - An attribute that makes something stand out.
Slots - A narrow opening which something can be inserted into, or a machine commonly found in casinos to win money and tokens.
Wireless - A wire free device that uses radio and microwaves to send signals.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Fan - A piece of equipment that has blades that rotate to cool the air, can be installed within other equipment,
Ideal - Something that satisfies a perfect criteria.
Combination - The process of two of more things being mixed or combined together.

Supplier Information

Transparent Communications
We are a provider of IT and networking equipment at competitive prices with friendly and knowledgeable customer service. Our products include PCs, laptops, tablets, routers, network storage and CCTV, including top brands such as HP, Cisco and Apple.
Page Updated: 2022-11-11 12:11:34

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu