As a leading provider of network equipment for SMBs, NETGEAR&174; understands the importance of reliable & high performance networks. With the growth of virtualization, cloud-based services & applications like Vo IP, video streaming & IP surveillance, SMB networks need to extend beyond simple reliability to higher speed & performance. The 10-Gigabit & Multi-Gigabit Smart Managed Plus Switches from NETGEAR present the right solution for this requirement; delivering unprecedented non-blocking 10-Gigabit bandwidth at the most affordable cost. All of them are perfect for removing the SMB network bottlenecks caused by the proliferation of Gigabit-to-the-desktop & the upcoming 10-Gigabit/ Multi-Gigabit high end workstations. \n\n Configurable L2 Networking Features\n The 10G Web Managed (Plus) Switches provide plug-&-play connectivity, in addition to configurable L2 network features in order to meet current & future needs on virtualization, converged networking & mobility. Some of the main features include:\n Advanced VLAN support for traffic segmentation including port-based & 802.1Q-based\n Advanced Qo S (Quality of Service) for traffic prioritization including port-based & 802.1p/DSCP-based\n Auto &156;denial-of-service&157; (Do S) prevention\n IGMP snooping support for multicast optimization\n Loop detection & broadcast storm controls\n Rate limiting & priority queuing for better bandwidth allocation\n Port mirroring for network monitoring\n Port trunking/link aggregation (LAG) allows for increased throughput beyond 10G or to provide redundancy across the link (s)\n Jumbo frame support\n\n 5-Speed Networking\n The all new GS110EMX, XS512EM & XS724EM comes with the revolutionary 5-speed Multi-Gigabit technology built in the NETGEAR multi-speed switches allows your devices to speed past the Gigabit barrier.\n The ports automatically detects which speed is needed by the connected device & provides the adequate speed. Moreover the Multi-speed switch ports can be connected with regular Cat 5E Ethernet cables, without the need to upgrade to Cat 6 wiring, therefore reducing wiring costs & hassle.\n\n 10-Gigabit Transition with BASE-T\n With 10GBASE-T support, the 10G Web Managed (Plus) Switches enable a standard RJ45 Ethernet jack & existing Cat 6 or Cat 7 network cables to be used, delivering a 10X increase in network performance with minimum network changes & upgrades.\n 10GBASE-T is backward compatible, auto-negotiating between higher & lower speeds, thereby not forcing an all-at-once network equipment upgrade\n Cat 5/ Cat 5e are supported for Gigabit speeds & Multi-Gigabit (2.5G, 5G) speeds up to 100 meters\n Cat 6 twisted pair copper cabling supports 10-Gigabit speeds up to 45 meters\n Cat 6a or newer Cat 7 cabling will allow for up to 100 meter 10GBASE-T connections\n\n Smart IT, not Big IT\n Easy-to-use web browser-based management GUI makes setup & management simple\n Standards-based technology, ensuring interoperability with any standards-based devices in the existing network\n Worry-free with NETGEAR Pro SAFE LIFETIME Hardware Warranty\n Minimal down-time with NETGEAR Pro SAFE LIFETIME Next-Business-Day (NBD) Replacement Warranty\n Get deployment assistance with 90-days Free 24x 7 Advanced Technical Phone Support\n LIFETIME 24x 7 Online Chat Technical Support Feature Feature Value Switch type Managed Switch layer L2/L3 Quality of Service (Qo S) support Y Web-based management Y Virtual Cable Test (VCT)YBasic switching RJ-45 Ethernet ports quantity 10 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Gigabit Ethernet (copper) ports quantity 8 Power connector DC-in jack Networking standards IEEE 802.1Q, IEEE 802.1p, IEEE 802.3az, IEEE 802.3x 10G support Y Cable types supported Cat 5, Cat 5e, Cat 6, Cat 6a, Cat 7 Port mirroring Y Full duplex Y Flow control support Y Link aggregation Y Broadcast storm control Y Rate limiting YVLAN support Y Virtual LAN features Voice VLAN, Tagged VLAN, Port-based VLANNumber of VLANs 64MAC address table 16000 entries Switching capacity 56 Gbit/s Forwarding rate 41.664 Mpps Latency (10-100 Mbps)7 &181;s Latency (1 Gbps)4 &181;s Latency (10 Gbps)3 &181;s Number of queues 8 Jumbo frames support Y Jumbo frames 10240 Packet buffer memory 0.128 MBDHCP features DHCP client IGMP snooping Y Loop protection Y Password protection Y Do S attack prevention Y Queue scheduling algorithms Weighted Round Robin (WRR) Multicast support Y Number of multicast groups filtered 128 Rack mounting Y Product colour Black Housing material Metal LED indicators Link, Power, Speed Wall mountable Y Safety UL/c UL Listed (UL 60950-1)/CAN/CSA C22.2 No. 60960-1-07, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, AS/NZS 60950.1:2015 Electromagnetic compatibility Class BCertification 47 CFR FCC Part 15, Subpart B, Class Bn ICES-003:2016 Issue 6, Class Bn ANSI C63.4:2014n N 55032:2012 +AC:2013 / CISPR 32:2012 / AS/NZS CISPR 32:2013, Class Bn EN 55032:2015 +AC:2016 / CISPR 32:2015 +COR1:2016 / AS/NZS CISPR 32:2015, Class Bn EN 61000-3-2:2014n EN 61000-3-3:2013n EN 55024:2010 +A1:2015 Firmware upgradeable Y Output voltage 12 VOutput current 2.5 APower consumption (typical)6.6 WPower consumption (max)15.6 WPower over Ethernet (Po E)NOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-20
- 70 &176;COperating relative humidity (H-H)0
- 90% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Non-operating altitude 0
- 3000 m Heat dissipation 53.35 BTU/h Width 236 mm Depth 102 mm Height 27 mm Weight 750 g Quick start guide Y Wall mounting kit YAC adapter included Y Rack mount kit Y Rubber feet Y