The DPE-301GS Po E splitter is used with end devices such as wireless access points, IP cameras & Vo IP phones that don&153;t natively support Po E, but rather require DC power input of 5V, 9V or 12V. It receives Po E power on a network cable from a Po E switch or midspan injector, & splits the Ethernet & DC power into two separate cables. One cable provides the DC power, & the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC & 12VDC power for their device using a selectable DIP switch on the device.\n\n The DPE-301GS Po E splitter is typically located near the end device. It has two 10/100/1000 RJ-45 ports. One port is for Po E IN, which is the network connection & is usually connected to a remote Po E switch or injector. The other port is for LAN OUT, which is the connection that provides the Ethernet signal to the end device. The DPE-301GS also has a 5.5mm DC OUT port. Two adapter cables are supplied; either one may be connected to this port, depending on whether 5.5mm or 3.8mm interface is required for the end device. Feature Feature Value Ethernet interface type Fast Ethernet, Gigabit Ethernet Ethernet LAN data rates 10, 100, 1000 Mbit/s Power over Ethernet (Po E)YNetworking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u Rack mounting N Product colour White Certification CE, FCC, VCCI, RCMEthernet LAN (RJ-45) ports 2DC-in jack Y Output power 32.4 WAC adapter input voltage 100
- 240 VAC adapter frequency 50/60 Hz Operating temperature (T-T)0
- 50 &176;COperating temperature (T-T)32
- 122 &176;FOperating relative humidity (H-H)5
- 95% Storage temperature (T-T)-30
- 70 &176;CStorage relative humidity (H-H)5
- 95% Weight 98 g Dimensions (Wx Dx H)109.8 x 62.2 x 24.5 mm Number of products included 1 pc (s)