A Refreshing Take on Network Managementn The D-Link DNH-100 Wireless Controller is a centralized wireless LAN manager developed specifically for our Nuclias Connect management solution & is suitable for small to medium-sized business (SMB) IT infrastructure. It comes preloaded with Nuclias Connect network management software, which is a key asset for businesses where IT skills are limited by financial or other constraints.nn Tasks can be centralized & automated, meaning the DNH-100 is highly suited for remote deployment where either dedicated onsite staff are unavailable, or servers, PCs & other devices that can run the software might not be viable.nn Better-Than-Expected Performance at a Smaller-Than-Expected Pricen The DNH-100 is unbeatable value for your money, delivering real value at a lower-than-expected price. Its backwards compatibility with a variety of legacy AP&153;s means no need to unnecessarily replace older but still functioning hardware, better for your wallet & the planet.nn With the ability to support up to 100 APs & a variety of business tools including Captive Portal, Payment Gateway Integration & Front Desk Ticket Management. Accordingly, all these top-notch capabilities can all be centralized thanks to the Nuclias Connect management software to reduce admin cost & fulfil most of SMBs networking & day-to-day demands.nn Big Things Come in Small Packagesn Despite its modest size, the DNH-100 offers the same Nuclias Connect management functionality of a larger device.n With a 1000 Base-T Ethernet port, a USB (Universal Serial Bus) 3.0 port, a Micro SD slot as well as support for IEEE 802.3ab/u/x, it&153;s fully equipped for all occasions. Furthermore, manage up to 100 APs at one time, create & configure AP profiles, multiple SSID settings, access control, VLANs, time-based rules, bandwidth & performance. Control ranges from all-encompassing down to a single AP, so that fine-tuning your network via the connect software is effortlessly simple.nn A Network That Can Look Out for Itselfn The DNH-100 features self-organizing & self-optimizing capabilities such as interval-based radio scanning & analysis, self-management of radio frequency, as well as L2/L3 AP discovery & output power. Combined with other self-healing capabilities, it can maintain stability & continue operating at optimal levels even during peak usage times, so you can rest assured users are getting the best service possible.nn An End to an Endless Number of Accountsn Nuclias Connect enables an extensive understanding of your network & its users through traffic analytics & status reports, which can be viewed at a glance. Insights derived from this data provide actionable intelligence which businesses can use to create business value. Traffic can be viewed across the entire network, down to the level of a single AP. Capacity & growth can be evaluated, as well as any irregularities that may arise, allowing for easier troubleshooting.nn Real-Time Analytics & Reporting, All on an Intuitive Interfacen Nuclias Connect enables an extensive understanding of your network & its users through traffic analytics & status reports, which can be viewed at a glance. Insights derived from this data provide actionable intelligence which businesses can use to create business value. Traffic can be viewed across the entire network, down to the level of a single AP. Capacity & growth can be evaluated, as well as any irregularities that may arise, allowing for easier troubleshooting.\n\n\n\n Product ID: DNH-100\n\n\n\n\n\n Model: DNH-100\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

- 2-bay Network Video Recorder, uses inexpensive 3.5" SATA drives
- mydlink™ enabled for the easiest way to monitor your
...

- 2-bay Network Video Recorder, uses inexpensive 3.5" SATA drives
- Records simultaneously from up to 9 IP cameras
- Support

...

- 1-Bay Network Attached Storage for 3.5" SATA drives
- Gigabit connectivity for fast transmission speeds
- User/group"as

...

The Share Center Pulse Network Storage devices enable users to share documents & media content such as photos, music & videos on a home network or over the Internet. File access is easy & straightforward with the built-in web file server, which means that you can browse & download your stored files over the Internet. The Share Center Pulse has a Gigabit port for the fastest connectivity possible to your home network through your router. RAID 1 technology ensures that your valuable data will not be lost by mirroring the contents of one hard drive onto the other, so if one drive files, your data is still safe. The confidentiality & integrity of files is guaranteed as you can give rights to specific users or groups & assign them to folders with specific read/write permissions. This function is ideal for the home, where children's access can be restricted to only age-appropriate materials, while ensuring that nobody can delete your files by accident. The DNS-320 Share Center Pulse is part of D-Link Green, D-Link's program for providing eco-friendly alternatives without compromising performance: if the hard drives are not used in a configurable period of time, or data is not being transmitted, the Share Center Pulse will enter st&-by mode to save power. Also, the silent fan will adapt its speed depending on the hard drives temperature. ...

he DNS-327L Share Center™+ 2-Bay Cloud Network Storage Enclosure is an easy-to-use yet powerful & versatile solution for accessing, sharing, & backing up your important data by creating your own personal cloud. Keep all of your data safely stored & protected at home, & still have it at your fingertips wherever you are. Share Your Files from Anywhere By setting up a mydlink™ account & accessing the secure portal, users can download & upload files, delete files/folders from their storage device & check the status of their Share Center™+ remotely. With the mydlink™ Access-NAS app available for iPhone & iPad, or Android smartphone & tablet, users can view photos, stream music & videos from their mobile devices. Files can be downloaded from a storage device to a mobile device to send on or watch later. Music, movies & photos can also be uploaded to a Share Center™+ & backed up, meaning that users won′t run out of space on their smartphones or tablets. The Share Center™+ 2-Bay Cloud Network Storage Enclosure

Includes:: a web enabled file server which means that you can download your documents, photos, & other multimedia files from wherever you are. Once configured, simply log into your Share Center™+ using the friendly web user interface to view a list of available files. Easy Installation & Setup This enclosure supports 2" internal SATA HDDs up to 4TB capacity & installing them is as simple as popping the top & sliding them in. Push the latch button to access the drive bays, then just slide your drives into place & you′re ready. A convenient USB (Universal Serial Bus) port on the back of the Share Center™+ can be used to either share a USB (Universal Serial Bus) printer with an entire home or office, or attach an external USB (Universal Serial Bus) storage drive for easy one-touch backup. You can also connect an Uninterruptible Power Supply (UPS) to monitor power levels & ensure the safety of your data in the event of a power failure. Plus, you can copy the contents of a USB (Universal Serial Bus) dongle at the touch of a button. Stream Digital Media With a Built-in Media Server Back up your digital media files to the Share Center™+ for safekeeping, & enjoy the benefits of the built-in DLNA Certified UPn P AV media server. Stream digital content to compatible media players such as the Play Station 3, Microsoft Xbox 360, or directly to a smart TV. You can also enjoy photo, music, & video streaming remotely through mobile devices. Powerful Performance & Flexibility Four different hard drive configuration modes are available (Standard, JBOD, RAID 0, RAID 1), which allow users to choose the configuration best suited to their needs. Standard mode creates two separately accessible hard drives. JBOD combines both drives to create a single, easy to use volume. RAID 0 combines both drives in a striped" configuration, which provides maximum performance when using a Gigabit Ethernet connection. RAID 1 creates a copy of your data on both drives, providing maximum protection; if one drive fails, the unaffected drive continues to function as a single drive until the failed drive is replaced. The DNS-327L is hot-swap enabled meaning you can easily replace a failed drive & your data will automatically be copied to the new drive, allowing the Share Center™+ to return to its full level of protection & ensuring your files remain safe. More Than Just a Network Attached Storage The DNS-327L

Includes:: smart library applications that means that you can organise your music & photos effortlessly. Music Center means that you can manage your music collection with integrated music player & Apple Air Play support whilst Photo Center lets you create albums & manage photos, & share through social networks such as Facebook, Picasa & Flickr. Surveillance Center gives you the ability to set up a comprehensive surveillance system with mydlink™-enabled cameras without complicated setup. Additional third party add-on applications are available to allow you to do even more with the DNS-327L.



...

'- Po E/ Po E+ compatible\n- For Gigabit & Fast Ethernet connections Feature Feature Value LED indicators Y Ethernet LAN (RJ-45) ports 2 Weight 65 g ...

'- Facilitates deployment of Po E devices where power outlets are not available\n- Reduces installation & network equipment costs by eliminating the need for electrical wiring\n- Provides power over existing network cabling to Po E devices such as access points, IP cameras, & IP phones\n- Lightweight, compact & easy to install\n- Supports 802.3af / 802.3at\n- 10/100/1000 interface provides flexibility for all types of connections\n\n D-Link&153;s DPE-301GI 1-Port Po E Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (Po E), even when other devices in the network do not support it. With Po E technology, low voltage DC power & Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), & Vo IP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, & lowers costs.\n\n The DPE-301GI device supports Gigabit speeds, & can connect to 10 Mbps, 100 Mbps or 1000 Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af & 802.3at Po E/ Po E+ standards, which ensures interoperability with other standards-based Po E & Po E+ devices. Small & compact, the DPE-301GI is lightweight, has integrated mounting slots, & is easy to install.\n\n The DPE-301GI provides a power & data connection to a Po E device over a single network cable. It allows I.T. Professionals to mount their Po E devices virtually anywhere in a building, such as on ceilings or near entryways, & eliminates the need for nearby power outlets & attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection & produces a Gigabit Po E signal, allowing a single Ethernet cable to carry both data & power to a device.\n\n Also known as a &156;midspan PSE&157;, the DPE-301GI Po E injector can be used when deploying a multi-port Po E switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN, which is the network connection, typically connected to a non-Po E switch or router. The other port isfor Po E OUT, which is the connection that provides both power & data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link, although it&153;s typically placed near the switch/router.\n\n Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.\n\n Support for IEEE 802.3at ensures the DPE-301GI can power Po E+ devices up to 30W, such as high power 802.11ac APs & IP cameras with PTZ motors, heaters & blowers.\n\n Po E Injector & Po E Splitter Tandem\n Both the DPE-301GI (injector) & DPE-301GS (splitter) can be used together, as a complete Po E transport system. This is especially useful when a Po E switch is not available, & the end device is not Po E capable, but the Network Administrator still prefers the benefits of Po E. Simply install the injector close to the network switch, install the splitter close to the end device, & plug in the cables. Feature Feature Value Ethernet interface type Fast Ethernet, Gigabit Ethernet Ethernet LAN data rates 10, 100, 1000 Mbit/s Power over Ethernet (Po E)YNetworking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u Rack mounting N Product colour White LED indicators Y Certification CE, FCC, VCCI, RCMEthernet LAN (RJ-45) ports 2DC-in jack Y Output power 32.4 WAC adapter input voltage 100
- 240 VAC adapter frequency 50/60 Hz Output current 0.6 AOperating temperature (T-T)0
- 50 &176;COperating temperature (T-T)32
- 122 &176;FOperating relative humidity (H-H)5
- 95% Storage temperature (T-T)-30
- 70 &176;CStorage relative humidity (H-H)5
- 95% Weight 70 g Dimensions (Wx Dx H)109.8 x 62.2 x 24.5 mm Number of products included 1 pc (s)





...

'- Facilitates deployment of Po E devices where power outlets are not available\n- Reduces installation & network equipment costs by eliminating the need for electrical wiring\n- Provides power over existing network cabling to Po E devices such as access points, IP cameras, & IP phones\n- Lightweight, compact & easy to install\n- Supports 802.3af / 802.3at\n- 10/100/1000 interface provides flexibility for all types of connections\n\n D-Link&153;s DPE-301GI 1-Port Po E Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (Po E), even when other devices in the network do not support it. With Po E technology, low voltage DC power & Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), & Vo IP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, & lowers costs.\n\n The DPE-301GI device supports Gigabit speeds, & can connect to 10 Mbps, 100 Mbps or 1000 Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af & 802.3at Po E/ Po E+ standards, which ensures interoperability with other standards-based Po E & Po E+ devices. Small & compact, the DPE-301GI is lightweight, has integrated mounting slots, & is easy to install.\n\n The DPE-301GI provides a power & data connection to a Po E device over a single network cable. It allows I.T. Professionals to mount their Po E devices virtually anywhere in a building, such as on ceilings or near entryways, & eliminates the need for nearby power outlets & attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection & produces a Gigabit Po E signal, allowing a single Ethernet cable to carry both data & power to a device.\n\n Also known as a &156;midspan PSE&157;, the DPE-301GI Po E injector can be used when deploying a multi-port Po E switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN, which is the network connection, typically connected to a non-Po E switch or router. The other port isfor Po E OUT, which is the connection that provides both power & data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link, although it&153;s typically placed near the switch/router.\n\n Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.\n\n Support for IEEE 802.3at ensures the DPE-301GI can power Po E+ devices up to 30W, such as high power 802.11ac APs & IP cameras with PTZ motors, heaters & blowers.\n\n Po E Injector & Po E Splitter Tandem\n Both the DPE-301GI (injector) & DPE-301GS (splitter) can be used together, as a complete Po E transport system. This is especially useful when a Po E switch is not available, & the end device is not Po E capable, but the Network Administrator still prefers the benefits of Po E. Simply install the injector close to the network switch, install the splitter close to the end device, & plug in the cables. Feature Feature Value Ethernet interface type Fast Ethernet, Gigabit Ethernet Ethernet LAN data rates 10, 100, 1000 Mbit/s Power over Ethernet (Po E)YNetworking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u Rack mounting N Product colour White LED indicators Y Certification CE, FCC, VCCI, RCMEthernet LAN (RJ-45) ports 2DC-in jack Y Output power 32.4 WAC adapter input voltage 100
- 240 VAC adapter frequency 50/60 Hz Output current 0.6 AOperating temperature (T-T)0
- 50 &176;COperating temperature (T-T)32
- 122 &176;FOperating relative humidity (H-H)5
- 95% Storage temperature (T-T)-30
- 70 &176;CStorage relative humidity (H-H)5
- 95% Weight 70 g Dimensions (Wx Dx H)109.8 x 62.2 x 24.5 mm Number of products included 1 pc (s)





...

The DPE-301GS Po E splitter is used with end devices such as wireless access points, IP cameras & Vo IP phones that don&153;t natively support Po E, but rather require DC power input of 5V, 9V or 12V. It receives Po E power on a network cable from a Po E switch or midspan injector, & splits the Ethernet & DC power into two separate cables. One cable provides the DC power, & the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC & 12VDC power for their device using a selectable DIP switch on the device.\n\n The DPE-301GS Po E splitter is typically located near the end device. It has two 10/100/1000 RJ-45 ports. One port is for Po E IN, which is the network connection & is usually connected to a remote Po E switch or injector. The other port is for LAN OUT, which is the connection that provides the Ethernet signal to the end device. The DPE-301GS also has a 5.5mm DC OUT port. Two adapter cables are supplied; either one may be connected to this port, depending on whether 5.5mm or 3.8mm interface is required for the end device. Feature Feature Value Ethernet interface type Fast Ethernet, Gigabit Ethernet Ethernet LAN data rates 10, 100, 1000 Mbit/s Power over Ethernet (Po E)YNetworking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u Rack mounting N Product colour White Certification CE, FCC, VCCI, RCMEthernet LAN (RJ-45) ports 2DC-in jack Y Output power 32.4 WAC adapter input voltage 100
- 240 VAC adapter frequency 50/60 Hz Operating temperature (T-T)0
- 50 &176;COperating temperature (T-T)32
- 122 &176;FOperating relative humidity (H-H)5
- 95% Storage temperature (T-T)-30
- 70 &176;CStorage relative humidity (H-H)5
- 95% Weight 98 g Dimensions (Wx Dx H)109.8 x 62.2 x 24.5 mm Number of products included 1 pc (s)





...