D-Link DPE-301GI PoE Adapter Fast Ethernet, Gigabit Ethernet

Product Description

'- Facilitates deployment of Po E devices where power outlets are not available\n- Reduces installation & network equipment costs by eliminating the need for electrical wiring\n- Provides power over existing network cabling to Po E devices such as access points, IP cameras, & IP phones\n- Lightweight, compact & easy to install\n- Supports 802.3af / 802.3at\n- 10/100/1000 interface provides flexibility for all types of connections\n\n D-Link&153;s DPE-301GI 1-Port Po E Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (Po E), even when other devices in the network do not support it. With Po E technology, low voltage DC power & Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), & Vo IP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, & lowers costs.\n\n The DPE-301GI device supports Gigabit speeds, & can connect to 10 Mbps, 100 Mbps or 1000 Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af & 802.3at Po E/ Po E+ standards, which ensures interoperability with other standards-based Po E & Po E+ devices. Small & compact, the DPE-301GI is lightweight, has integrated mounting slots, & is easy to install.\n\n The DPE-301GI provides a power & data connection to a Po E device over a single network cable. It allows I.T. Professionals to mount their Po E devices virtually anywhere in a building, such as on ceilings or near entryways, & eliminates the need for nearby power outlets & attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection & produces a Gigabit Po E signal, allowing a single Ethernet cable to carry both data & power to a device.\n\n Also known as a &156;midspan PSE&157;, the DPE-301GI Po E injector can be used when deploying a multi-port Po E switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN, which is the network connection, typically connected to a non-Po E switch or router. The other port isfor Po E OUT, which is the connection that provides both power & data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link, although it&153;s typically placed near the switch/router.\n\n Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.\n\n Support for IEEE 802.3at ensures the DPE-301GI can power Po E+ devices up to 30W, such as high power 802.11ac APs & IP cameras with PTZ motors, heaters & blowers.\n\n Po E Injector & Po E Splitter Tandem\n Both the DPE-301GI (injector) & DPE-301GS (splitter) can be used together, as a complete Po E transport system. This is especially useful when a Po E switch is not available, & the end device is not Po E capable, but the Network Administrator still prefers the benefits of Po E. Simply install the injector close to the network switch, install the splitter close to the end device, & plug in the cables. Feature Feature Value Ethernet interface type Fast Ethernet, Gigabit Ethernet Ethernet LAN data rates 10, 100, 1000 Mbit/s Power over Ethernet (Po E)YNetworking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u Rack mounting N Product colour White LED indicators Y Certification CE, FCC, VCCI, RCMEthernet LAN (RJ-45) ports 2DC-in jack Y Output power 32.4 WAC adapter input voltage 100
- 240 VAC adapter frequency 50/60 Hz Output current 0.6 AOperating temperature (T-T)0
- 50 &176;COperating temperature (T-T)32
- 122 &176;FOperating relative humidity (H-H)5
- 95% Storage temperature (T-T)-30
- 70 &176;CStorage relative humidity (H-H)5
- 95% Weight 70 g Dimensions (Wx Dx H)109.8 x 62.2 x 24.5 mm Number of products included 1 pc (s)