'- Facilitates deployment of Po E devices where power outlets are not available\n- Reduces installation & network equipment costs by eliminating the need for electrical wiring\n- Provides power over existing network cabling to Po E devices such as access points, IP cameras, & IP phones\n- Lightweight, compact & easy to install\n- Supports 802.3af / 802.3at\n- 10/100/1000 interface provides flexibility for all types of connections\n\n D-Link&153;s DPE-301GI 1-Port Po E Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (Po E), even when other devices in the network do not support it. With Po E technology, low voltage DC power & Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), & Vo IP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, & lowers costs.\n\n The DPE-301GI device supports Gigabit speeds, & can connect to 10 Mbps, 100 Mbps or 1000 Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af & 802.3at Po E/ Po E+ standards, which ensures interoperability with other standards-based Po E & Po E+ devices. Small & compact, the DPE-301GI is lightweight, has integrated mounting slots, & is easy to install.\n\n The DPE-301GI provides a power & data connection to a Po E device over a single network cable. It allows I.T. Professionals to mount their Po E devices virtually anywhere in a building, such as on ceilings or near entryways, & eliminates the need for nearby power outlets & attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection & produces a Gigabit Po E signal, allowing a single Ethernet cable to carry both data & power to a device.\n\n Also known as a &156;midspan PSE&157;, the DPE-301GI Po E injector can be used when deploying a multi-port Po E switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN, which is the network connection, typically connected to a non-Po E switch or router. The other port isfor Po E OUT, which is the connection that provides both power & data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link, although it&153;s typically placed near the switch/router.\n\n Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.\n\n Support for IEEE 802.3at ensures the DPE-301GI can power Po E+ devices up to 30W, such as high power 802.11ac APs & IP cameras with PTZ motors, heaters & blowers.\n\n Po E Injector & Po E Splitter Tandem\n Both the DPE-301GI (injector) & DPE-301GS (splitter) can be used together, as a complete Po E transport system. This is especially useful when a Po E switch is not available, & the end device is not Po E capable, but the Network Administrator still prefers the benefits of Po E. Simply install the injector close to the network switch, install the splitter close to the end device, & plug in the cables. Feature Feature Value Ethernet interface type Fast Ethernet, Gigabit Ethernet Ethernet LAN data rates 10, 100, 1000 Mbit/s Power over Ethernet (Po E)YNetworking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u Rack mounting N Product colour White LED indicators Y Certification CE, FCC, VCCI, RCMEthernet LAN (RJ-45) ports 2DC-in jack Y Output power 32.4 WAC adapter input voltage 100
- 240 VAC adapter frequency 50/60 Hz Output current 0.6 AOperating temperature (T-T)0
- 50 &176;COperating temperature (T-T)32
- 122 &176;FOperating relative humidity (H-H)5
- 95% Storage temperature (T-T)-30
- 70 &176;CStorage relative humidity (H-H)5
- 95% Weight 70 g Dimensions (Wx Dx H)109.8 x 62.2 x 24.5 mm Number of products included 1 pc (s)





...

'- Facilitates deployment of Po E devices where power outlets are not available\n- Reduces installation & network equipment costs by eliminating the need for electrical wiring\n- Provides power over existing network cabling to Po E devices such as access points, IP cameras, & IP phones\n- Lightweight, compact & easy to install\n- Supports 802.3af / 802.3at\n- 10/100/1000 interface provides flexibility for all types of connections\n\n D-Link&153;s DPE-301GI 1-Port Po E Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (Po E), even when other devices in the network do not support it. With Po E technology, low voltage DC power & Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), & Vo IP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, & lowers costs.\n\n The DPE-301GI device supports Gigabit speeds, & can connect to 10 Mbps, 100 Mbps or 1000 Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af & 802.3at Po E/ Po E+ standards, which ensures interoperability with other standards-based Po E & Po E+ devices. Small & compact, the DPE-301GI is lightweight, has integrated mounting slots, & is easy to install.\n\n The DPE-301GI provides a power & data connection to a Po E device over a single network cable. It allows I.T. Professionals to mount their Po E devices virtually anywhere in a building, such as on ceilings or near entryways, & eliminates the need for nearby power outlets & attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection & produces a Gigabit Po E signal, allowing a single Ethernet cable to carry both data & power to a device.\n\n Also known as a &156;midspan PSE&157;, the DPE-301GI Po E injector can be used when deploying a multi-port Po E switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN, which is the network connection, typically connected to a non-Po E switch or router. The other port isfor Po E OUT, which is the connection that provides both power & data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link, although it&153;s typically placed near the switch/router.\n\n Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.\n\n Support for IEEE 802.3at ensures the DPE-301GI can power Po E+ devices up to 30W, such as high power 802.11ac APs & IP cameras with PTZ motors, heaters & blowers.\n\n Po E Injector & Po E Splitter Tandem\n Both the DPE-301GI (injector) & DPE-301GS (splitter) can be used together, as a complete Po E transport system. This is especially useful when a Po E switch is not available, & the end device is not Po E capable, but the Network Administrator still prefers the benefits of Po E. Simply install the injector close to the network switch, install the splitter close to the end device, & plug in the cables. Feature Feature Value Ethernet interface type Fast Ethernet, Gigabit Ethernet Ethernet LAN data rates 10, 100, 1000 Mbit/s Power over Ethernet (Po E)YNetworking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u Rack mounting N Product colour White LED indicators Y Certification CE, FCC, VCCI, RCMEthernet LAN (RJ-45) ports 2DC-in jack Y Output power 32.4 WAC adapter input voltage 100
- 240 VAC adapter frequency 50/60 Hz Output current 0.6 AOperating temperature (T-T)0
- 50 &176;COperating temperature (T-T)32
- 122 &176;FOperating relative humidity (H-H)5
- 95% Storage temperature (T-T)-30
- 70 &176;CStorage relative humidity (H-H)5
- 95% Weight 70 g Dimensions (Wx Dx H)109.8 x 62.2 x 24.5 mm Number of products included 1 pc (s)





...

The DPE-301GS Po E splitter is used with end devices such as wireless access points, IP cameras & Vo IP phones that don&153;t natively support Po E, but rather require DC power input of 5V, 9V or 12V. It receives Po E power on a network cable from a Po E switch or midspan injector, & splits the Ethernet & DC power into two separate cables. One cable provides the DC power, & the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC & 12VDC power for their device using a selectable DIP switch on the device.\n\n The DPE-301GS Po E splitter is typically located near the end device. It has two 10/100/1000 RJ-45 ports. One port is for Po E IN, which is the network connection & is usually connected to a remote Po E switch or injector. The other port is for LAN OUT, which is the connection that provides the Ethernet signal to the end device. The DPE-301GS also has a 5.5mm DC OUT port. Two adapter cables are supplied; either one may be connected to this port, depending on whether 5.5mm or 3.8mm interface is required for the end device. Feature Feature Value Ethernet interface type Fast Ethernet, Gigabit Ethernet Ethernet LAN data rates 10, 100, 1000 Mbit/s Power over Ethernet (Po E)YNetworking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u Rack mounting N Product colour White Certification CE, FCC, VCCI, RCMEthernet LAN (RJ-45) ports 2DC-in jack Y Output power 32.4 WAC adapter input voltage 100
- 240 VAC adapter frequency 50/60 Hz Operating temperature (T-T)0
- 50 &176;COperating temperature (T-T)32
- 122 &176;FOperating relative humidity (H-H)5
- 95% Storage temperature (T-T)-30
- 70 &176;CStorage relative humidity (H-H)5
- 95% Weight 98 g Dimensions (Wx Dx H)109.8 x 62.2 x 24.5 mm Number of products included 1 pc (s)





...

The DPE-301GS Po E splitter is used with end devices such as wireless access points, IP cameras & Vo IP phones that don&153;t natively support Po E, but rather require DC power input of 5V, 9V or 12V. It receives Po E power on a network cable from a Po E switch or midspan injector, & splits the Ethernet & DC power into two separate cables. One cable provides the DC power, & the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC & 12VDC power for their device using a selectable DIP switch on the device.\n\n The DPE-301GS Po E splitter is typically located near the end device. It has two 10/100/1000 RJ-45 ports. One port is for Po E IN, which is the network connection & is usually connected to a remote Po E switch or injector. The other port is for LAN OUT, which is the connection that provides the Ethernet signal to the end device. The DPE-301GS also has a 5.5mm DC OUT port. Two adapter cables are supplied; either one may be connected to this port, depending on whether 5.5mm or 3.8mm interface is required for the end device. Feature Feature Value Ethernet interface type Fast Ethernet, Gigabit Ethernet Ethernet LAN data rates 10, 100, 1000 Mbit/s Power over Ethernet (Po E)YNetworking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u Rack mounting N Product colour White Certification CE, FCC, VCCI, RCMEthernet LAN (RJ-45) ports 2DC-in jack Y Output power 32.4 WAC adapter input voltage 100
- 240 VAC adapter frequency 50/60 Hz Operating temperature (T-T)0
- 50 &176;COperating temperature (T-T)32
- 122 &176;FOperating relative humidity (H-H)5
- 95% Storage temperature (T-T)-30
- 70 &176;CStorage relative humidity (H-H)5
- 95% Weight 98 g Dimensions (Wx Dx H)109.8 x 62.2 x 24.5 mm Number of products included 1 pc (s)





...

The DPE-302GE 2-Port Gigabit Po E Extender allows a Gigabit Power-over-Ethernet connection to be extended up to 500 m. With several mounting options, the DPE-302GE allows Po E devices to be deployed virtually anywhere over longer distances, eliminating the need for a nearby power outlet & attached power supply. Feature Feature Value Ethernet interface type Gigabit Ethernet Ethernet LAN data rates 10, 100, 1000 Mbit/s Power over Ethernet (Po E)YNetworking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x Duplex system Full, Half LED indicators Po E Certification C En FCCn LVD/CEn ICEthernet LAN (RJ-45) ports 3DC-in jack Y Power consumption (max)3.05 WOperating temperature (T-T)-10
- 60 &176;COperating temperature (T-T)-40
- 85 &176;FOperating relative humidity (H-H)10
- 95% Storage temperature (T-T)5
- 95 &176;CWeight 154 g Dimensions (Wx Dx H)155 x 60 x 40 mm



...

The DPR-1020 USB (Universal Serial Bus) Print Server is a versatile print server ideal to be used at an office, school or business. Supporting scan, fax, & print functions, the DPR-1020 provides an easy & cost-effective way to share your printer over a network SHARE YOUR PRINTER & MULTIFUNCTION EQUIPMENT The DPR-1020 USB (Universal Serial Bus) Multifunction Print Server provides users with the ability to share their printer on a network & offers print & scan compatibility for those who are using multifunction equipment. This print server allows multiple users to directly send out documents from their PC for printing & fax transmissions. Share your printer & multifunction equipment's printing, faxing, & scanning functions with the users on your network
- all from a single stylish & compact device. OPERATE ALL DEVICES SIMULTANEOUSLY Equipped with a powerful CPU, large memory, high speed USB (Universal Serial Bus) 2.0 port & capable of up to 100 Mbps network data transfer, this print server makes your operations fast & efficient. Printers attached to the DPR-1020 can print, scan, & fax at the same time, giving this device better performance than any software-based print server at a fraction of the cost. ACCESS SECURITY & MULTIPLE OS SUPPORT The DPR-1020 provides all the necessary security you need by allowing the administrator to configure user access rights to the printer. It supports a wide range of network operating systems including: Windows NT/2000/XP/ Vista, Apple Mac OS with Apple Talk, Linux, & Unix. Administrators will appreciate the flexibility & compatibility that this print server offers. SUPPORT FOR REMOTE PRINTING The DPR-1020 supports the Internet Printing Protocol (IPP), enabling remote users to output files to their office printer even when they are away from the office. The device also provides network administrators with critical information about the network printer so they can monitor printer operations in a timely manner. With the DPR-1020, you will never again have to worry about printing out important files where ever you are.
...

SHARE YOUR PRINTER & MULTIFUNCTION EQUIPMENT WIRELESSLY The DPR-1040 Wireless G Print Server lets users share a USB (Universal Serial Bus) printer across a network, while also providing scan & fax functions to those who use multifunction equipment. Use the WPS button neatly located on the side of the device to set up a secure wireless connection to your router or access point in seconds, giving you the time to enjoy the benefits of this stylish & compact device. HIGH SPEED OPERATION Equipped with a powerful CPU, large memory, high speed USB (Universal Serial Bus) 2.0 port & up to 100 Mbps network data transfer, this print server makes your operations fast & efficient. Printers attached to the DPR-1040 can print, scan, & fax at the same time, giving this device better performance than any software-based print server at a fraction of the cost. ACCESS SECURITY & MULTIPLE OS SUPPORT The DPR-1040 provides all the necessary security you need by allowing the administrator to configure user access rights to the printer. It supports computers running the Windows 2000/XP/ Vista & Apple Mac operating systems. REMOTE PRINTING SUPPORT The DPR-1040 supports the Internet Printing Protocol (IPP), enabling remote users to output to their printer even when they are away from the office. The print server also provides network administrators with critical information about the network printer. Regardless of where you are, with this print server never again worry about being unable to print out important files. ...

The tandem of D-Link&153;s new Enterprise Gigabit switches & DPS Series of Modular Redundant Power Supplies (RPSU) enables today&153;s business networks with unmatched flexibility, performance, scalability, & availability.\n The modular design of the DPS Series of RPSUs enables companies to selectively & cost effectively deploy higher availability configurations precisely when & where they are needed most. When paired with a supported D-Link switch, the DPS-200, & DPS-500 provide uninterrupted fail-over, in the unlikely event of a mechanical power supply failure. The system integration between D-Link&153;s Managed Layer 2 switches, Layer 3 switches, & RPSU system, provide customers with the fundamental building blocks to create economical & scalable networks without having to sacrifice network performance & availability.\n \n\n\n class="generic"> Technical details Shipping (inner) case width 34 cm Shipping (inner) case net weight 8.41kg Shipping (inner) case length 58.2 cm Shipping (inner) case height 51.8 cm Shipping (inner) case gross weight 9.4kg Quantity per pallet (sea)90 pc (s) Quantity per pallet (air)90 pc (s) Pallet width 120 cm Pallet length 110 cm Pallet height (sea)168.9 cm Pallet height (air)168.9 cm Pallet gross weight (sea)187.7kg Pallet gross weight (air)187.7kg Number of cartons per pallet (sea)18 Number of cartons per pallet (air)18 Weight & dimensions Dimensions (Wx Dx H)170 x 180 x 45 mm Weight 998 g Depth 180 mm Operational conditions Storage temperature (T-T)-25
- 55 &176;COperating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)20
- 80% Certificates Safety UL/CSAOther features Dimensions (Wx Dx H)170 x 180 x 45 mm Packaging data Package width 306 mm Package height 93 mm Package depth 554 mm Package weight 1.68kg Logistics data Quantity per shipping (inner) case 5 pc (s) Shipping (inner) case width 34 cm Shipping (inner) case net weight 8.41kg Shipping (inner) case length 58.2 cm Shipping (inner) case height 51.8 cm Shipping (inner) case gross weight 9.4kg Quantity per pallet (sea)90 pc (s) Quantity per pallet (air)90 pc (s) Pallet width 120 cm Pallet length 110 cm Pallet height (sea)168.9 cm Pallet height (air)168.9 cm Pallet gross weight (sea)187.7kg Pallet gross weight (air)187.7kg Number of cartons per pallet (sea)18 Number of cartons per pallet (air)18\n\n\n\nhttp://pdfs.icecat.biz/pdf/21242321-6567.pdf


...

- Low cost ADSL router with Wireless N 150 technology
- WPS button for one-touch wireless encryption
- Traffic inspection

...

D-Link ADSL supports the latest ADSL/ADSL2/ADSL2+ standards, providing speeds up to 24 Mbps downstream & 3 Mbps upstream. These speeds are suitable for high-speed multimedia Internet applications such as streaming video & IP phone from homes & offices. ...