The AEG 18 Volt cordless SDS-Plus 4 mode hammer drill uses Pro Lithium batteries & features AVS anti-vibration & safety clutch. Technical specification: Mode:SDS Hammer drilling, Rotary, Rotary stop & Chiselling Speed: Impact Rate: 0-3, 600 bpm with 2.3 Joules Drilling Capacity: Concrete: 26mm, Steel:13mm, Wood:30mm Weight: 3.5kg ...

AEG BS12C compact drill driver has a 17 stage adjustable torque dial so you get the same consistency when drilling delicate work pieces, this helps to cut down the risk of damaging your work. Also fitted with soft grip trigger & handle for your comfort & a built in LED light at the front for those poorly lit areas or on site where power may not be available. This machine has an easy magazine battery type loading action & is easily removed with the slightest of pressure for quick battery changes. Voltage: 12 Volt. No load speed: 0-350 & 0-1500 Max torque: 34 Nm. Chuck: 10mm Keyless. Drilling: Steel: 10mm Soft wood: 20mm. Weight: 1.2 kg. Charge time: 30 minutes. Available in One or Two Battery Versions. The AEG PRO Li THIUM ION technology protects both battery & machine in 3 ways: 1) Thermal Overload protection The thermal overload protection constantly monitors the temperature of the battery & automatically safeguards against overheating, therefore increasing the life of the battery pack. 2) Current Overload protection Too much current draw can permanently damage the cells of the battery thus reducing battery life. The Pro Lithium Ion current overload protection automatically shuts the battery down if the current levels get too high, but automatically resets its self so there is no loss of productivity. 3) Individual cell monitoring Individual cell monitoring ensures every cell in the battery is performing to its maximum capability to ensure optimum productivity. The cell monitoring also runs throughout the charge process to make sure no cells are damaged at this time. The AEGBS12C2KIT is supplied in a Plastic Carry Case Containing 100 Pce Bit set, 2 x 1.5 Ah Pro Li-ion Batteries, Charger, Torch (Bare Unit) & Trimming Knife with 5 Spare Blades. ...

AEG BS12C compact drill driver has a 17 stage adjustable torque dial so you get the same consistency when drilling delicate work pieces, this helps to cut down the risk of damaging your work. Also fitted with soft grip trigger & handle for your comfort & a built in LED light at the front for those poorly lit areas or on site where power may not be available. This machine has an easy magazine battery type loading action & is easily removed with the slightest of pressure for quick battery changes. Voltage: 12 Volt. No load speed: 0-350 & 0-1500 Max torque: 34 Nm. Chuck: 10mm Keyless. Drilling: Steel: 10mm Soft wood: 20mm. Weight: 1.2 kg. Charge time: 30 minutes. Available in One or Two Battery Versions. The AEG PRO Li THIUM ION technology protects both battery & machine in 3 ways: 1) Thermal Overload protection The thermal overload protection constantly monitors the temperature of the battery & automatically safeguards against overheating, therefore increasing the life of the battery pack. 2) Current Overload protection Too much current draw can permanently damage the cells of the battery thus reducing battery life. The Pro Lithium Ion current overload protection automatically shuts the battery down if the current levels get too high, but automatically resets its self so there is no loss of productivity. 3) Individual cell monitoring Individual cell monitoring ensures every cell in the battery is performing to its maximum capability to ensure optimum productivity. The cell monitoring also runs throughout the charge process to make sure no cells are damaged at this time. This AEG BS12C2L1 has 1 x PRO Li-Ion 1.5 Ah battery. Complete with Carry Bag. ...

The A.E.G. BS 18CL, with PRO Li-Ion battery technology is a powerful 18 volt compact drill driver with a 23-stage torque adjustment an additional drilling stage which provides greater flexibility & precision whatever the material & screw size. The BS18C has the most up to date electronic switch with variable speed for enhanced accuracy & less damage to screw heads. The two-speed planetary synchromesh gear is a unique design & gives this drill driver maximum torque. This drill driver has a strong metal 1.5-13mm keyless chuck for comfortable one handed bit & drill changing. A.E.G have combined power & comfort with the most up to date ergonomic soft-grip handle design for more comfortable use. The drill driver has a buil-in LED light for illuminating the workpiece. Batteries are changed easily by sliding them on & off. Specifications: LED light. Intergrated clutch. Chuck: 13mm Keyless. Speed, Two speed gearbox: 0-450/0-1, 650/min. Torque: 60 Nm, 23 Settings. Capacity: Steel: 13mm, Wood: 36mm. Weight: 1.7kg. The AEG PRO Li THIUM ION technology protects both battery & machine in 3 ways: 1) Thermal Overload protection The thermal overload protection constantly monitors the temperature of the battery & automatically safeguards against overheating, therefore increasing the life of the battery pack. 2) Current Overload protection Too much current draw can permanently damage the cells of the battery thus reducing battery life. The Pro Lithium Ion current overload protection automatically shuts the battery down if the current levels get too high, but automatically resets its self so there is no loss of productivity. 3) Individual cell monitoring Individual cell monitoring ensures every cell in the battery is performing to its maximum capability to ensure optimum productivity. The cell monitoring also runs throughout the charge process to make sure no cells are damaged at this time. The AEGBS18CL3P is supplied with 2 x 3.0 Ah PRO Li-Ion Batteries ...

The A.E.G. BS 18CL, with PRO Li-Ion battery technology is a powerful 18 volt compact drill driver with a 23-stage torque adjustment an additional drilling stage which provides greater flexibility & precision whatever the material & screw size. The BS18C has the most up to date electronic switch with variable speed for enhanced accuracy & less damage to screw heads. The two-speed planetary synchromesh gear is a unique design & gives this drill driver maximum torque. This drill driver has a strong metal 1.5-13mm keyless chuck for comfortable one handed bit & drill changing. A.E.G have combined power & comfort with the most up to date ergonomic soft-grip handle design for more comfortable use. The drill driver has a buil-in LED light for illuminating the workpiece. Batteries are changed easily by sliding them on & off. Specifications: LED light. Intergrated clutch. Chuck: 13mm Keyless. Speed, Two speed gearbox: 0-450/0-1, 650/min. Torque: 60 Nm, 23 Settings. Capacity: Steel: 13mm, Wood: 36mm. Weight: 1.7kg. The AEG PRO Li THIUM ION technology protects both battery & machine in 3 ways: 1) Thermal Overload protection The thermal overload protection constantly monitors the temperature of the battery & automatically safeguards against overheating, therefore increasing the life of the battery pack. 2) Current Overload protection Too much current draw can permanently damage the cells of the battery thus reducing battery life. The Pro Lithium Ion current overload protection automatically shuts the battery down if the current levels get too high, but automatically resets its self so there is no loss of productivity. 3) Individual cell monitoring Individual cell monitoring ensures every cell in the battery is performing to its maximum capability to ensure optimum productivity. The cell monitoring also runs throughout the charge process to make sure no cells are damaged at this time. Supplied with: 2 x 1.5 Ah PRO Lithium-Ion batteries, charger & kitbox. ...

AEG BSB 18 Ultra compact cordless combi drill with PRO-Lithium batteries for high torque applications with a two speed gearbox & three mode selection switch for fast easy mode changes. The 24 stage clutch adjustment allows for complete control. Supplied with a well positioned LED to illuminate the workplace without obstrucion, an innovative positioned side handle which eliminates the need for a collar thus reducing the overall lenght of the tool. Specifications: Input Power: 18 Volt Max torque: 60 Nm 24 Stage Chuck Capacity: 1.5
- 13mm Drilling Capacity: Wood: 38mm Steel: 13mm Concrete: 13mm Speed at no load: -450/0-1650 /min Impact rate: 0-5, 850
- 21, 450bpm

...

A.E.G BSB 18 Cordless Combi drills, ideal for applications calling for high torque levels. With a 22-stage torque adjustment plus additional drilling stage giving greater flexibility & precision whatever the material & screw size. The electronic switch with variable speed gives enhanced accuracy & less damage to screw-heads. Two-speed planetary synchromesh gear for max. torque with hammer-drill mode for drilling in masonry & stone. FIXTEC & keyless chuck for comfortable, one-handed bit changing with heavy-duty metal keyless chuck 1, 5-13 mm. Voltage: 18 Volt Chuck: 13mm Keyless Max torque :47 Nm Drilling Capacity: Wood: 30mm Steel: 13mm Concrete: 12mm Speed: 0-400/0-1, 500 /min Weight: 2.2kg. BSB GLi is supplied with 2 x 1.5 Ah Li-Ion batteries. ...

AEG BSB 18 Heavy-Duty Cordless combi drill with PRO-Lithium batteries for high torque applications with a two speed gearbox. The 24 stage clutch adjustment allows for complete control & the FIXTEC 13mm Rohm full metal chuck maintains grip in the toughest of appplications. Specifications: Input Power: 18 Volt Max torque: 70 Nm 24 Stage Chuck Capacity: 1.5
- 13mm Drilling Capacity: Wood: 55mm Steel: 13mm Concrete: 16mm Speed at no load (1st/2nd gear) 0-450/0-1600 /min Impact rate: 0-7, 200
- 25, 600bpm BSB 18 LI 3 P is supplied with: 2 x 3.0 Ah PRO-Lithium Batteries 1 x AL1218 Charger

...