AEG BS12C compact drill driver has a 17 stage adjustable torque dial so you get the same consistency when drilling delicate work pieces, this helps to cut down the risk of damaging your work. Also fitted with soft grip trigger & handle for your comfort & a built in LED light at the front for those poorly lit areas or on site where power may not be available. This machine has an easy magazine battery type loading action & is easily removed with the slightest of pressure for quick battery changes. Voltage: 12 Volt. No load speed: 0-350 & 0-1500 Max torque: 34 Nm. Chuck: 10mm Keyless. Drilling: Steel: 10mm Soft wood: 20mm. Weight: 1.2 kg. Charge time: 30 minutes. Available in One or Two Battery Versions. The AEG PRO Li THIUM ION technology protects both battery & machine in 3 ways: 1) Thermal Overload protection The thermal overload protection constantly monitors the temperature of the battery & automatically safeguards against overheating, therefore increasing the life of the battery pack. 2) Current Overload protection Too much current draw can permanently damage the cells of the battery thus reducing battery life. The Pro Lithium Ion current overload protection automatically shuts the battery down if the current levels get too high, but automatically resets its self so there is no loss of productivity. 3) Individual cell monitoring Individual cell monitoring ensures every cell in the battery is performing to its maximum capability to ensure optimum productivity. The cell monitoring also runs throughout the charge process to make sure no cells are damaged at this time. This AEG BS12C2L1 has 1 x PRO Li-Ion 1.5 Ah battery. Complete with Carry Bag. ...

AEG BS12C compact drill driver has a 17 stage adjustable torque dial so you get the same consistency when drilling delicate work pieces, this helps to cut down the risk of damaging your work. Also fitted with soft grip trigger & handle for your comfort & a built in LED light at the front for those poorly lit areas or on site where power may not be available. This machine has an easy magazine battery type loading action & is easily removed with the slightest of pressure for quick battery changes. Voltage: 12 Volt. No load speed: 0-350 & 0-1500 Max torque: 34 Nm. Chuck: 10mm Keyless. Drilling: Steel: 10mm Soft wood: 20mm. Weight: 1.2 kg. Charge time: 30 minutes. Available in One or Two Battery Versions. The AEG PRO Li THIUM ION technology protects both battery & machine in 3 ways: 1) Thermal Overload protection The thermal overload protection constantly monitors the temperature of the battery & automatically safeguards against overheating, therefore increasing the life of the battery pack. 2) Current Overload protection Too much current draw can permanently damage the cells of the battery thus reducing battery life. The Pro Lithium Ion current overload protection automatically shuts the battery down if the current levels get too high, but automatically resets its self so there is no loss of productivity. 3) Individual cell monitoring Individual cell monitoring ensures every cell in the battery is performing to its maximum capability to ensure optimum productivity. The cell monitoring also runs throughout the charge process to make sure no cells are damaged at this time. This AEG BS12C2L2 has 2 x PRO Li-Ion 1.5 Ah batteries in a kit box. ...

The A.E.G. BS 18CL, with PRO Li-Ion battery technology is a powerful 18 volt compact drill driver with a 23-stage torque adjustment an additional drilling stage which provides greater flexibility & precision whatever the material & screw size. The BS18C has the most up to date electronic switch with variable speed for enhanced accuracy & less damage to screw heads. The two-speed planetary synchromesh gear is a unique design & gives this drill driver maximum torque. This drill driver has a strong metal 1.5-13mm keyless chuck for comfortable one handed bit & drill changing. A.E.G have combined power & comfort with the most up to date ergonomic soft-grip handle design for more comfortable use. The drill driver has a buil-in LED light for illuminating the workpiece. Batteries are changed easily by sliding them on & off. Specifications: LED light. Intergrated clutch. Chuck: 13mm Keyless. Speed, Two speed gearbox: 0-450/0-1, 650/min. Torque: 60 Nm, 23 Settings. Capacity: Steel: 13mm, Wood: 36mm. Weight: 1.7kg. The AEG PRO Li THIUM ION technology protects both battery & machine in 3 ways: 1) Thermal Overload protection The thermal overload protection constantly monitors the temperature of the battery & automatically safeguards against overheating, therefore increasing the life of the battery pack. 2) Current Overload protection Too much current draw can permanently damage the cells of the battery thus reducing battery life. The Pro Lithium Ion current overload protection automatically shuts the battery down if the current levels get too high, but automatically resets its self so there is no loss of productivity. 3) Individual cell monitoring Individual cell monitoring ensures every cell in the battery is performing to its maximum capability to ensure optimum productivity. The cell monitoring also runs throughout the charge process to make sure no cells are damaged at this time. The AEGBS18CL3P is supplied with 2 x 3.0 Ah PRO Li-Ion Batteries ...

The A.E.G. BS 18CL, with PRO Li-Ion battery technology is a powerful 18 volt compact drill driver with a 23-stage torque adjustment an additional drilling stage which provides greater flexibility & precision whatever the material & screw size. The BS18C has the most up to date electronic switch with variable speed for enhanced accuracy & less damage to screw heads. The two-speed planetary synchromesh gear is a unique design & gives this drill driver maximum torque. This drill driver has a strong metal 1.5-13mm keyless chuck for comfortable one handed bit & drill changing. A.E.G have combined power & comfort with the most up to date ergonomic soft-grip handle design for more comfortable use. The drill driver has a buil-in LED light for illuminating the workpiece. Batteries are changed easily by sliding them on & off. Specifications: LED light. Intergrated clutch. Chuck: 13mm Keyless. Speed, Two speed gearbox: 0-450/0-1, 650/min. Torque: 60 Nm, 23 Settings. Capacity: Steel: 13mm, Wood: 36mm. Weight: 1.7kg. The AEG PRO Li THIUM ION technology protects both battery & machine in 3 ways: 1) Thermal Overload protection The thermal overload protection constantly monitors the temperature of the battery & automatically safeguards against overheating, therefore increasing the life of the battery pack. 2) Current Overload protection Too much current draw can permanently damage the cells of the battery thus reducing battery life. The Pro Lithium Ion current overload protection automatically shuts the battery down if the current levels get too high, but automatically resets its self so there is no loss of productivity. 3) Individual cell monitoring Individual cell monitoring ensures every cell in the battery is performing to its maximum capability to ensure optimum productivity. The cell monitoring also runs throughout the charge process to make sure no cells are damaged at this time. Supplied with: 2 x 1.5 Ah PRO Lithium-Ion batteries, charger & kitbox. ...

AEG BSB 18 Ultra compact cordless combi drill with PRO-Lithium batteries for high torque applications with a two speed gearbox & three mode selection switch for fast easy mode changes. The 24 stage clutch adjustment allows for complete control. Supplied with a well positioned LED to illuminate the workplace without obstrucion, an innovative positioned side handle which eliminates the need for a collar thus reducing the overall lenght of the tool. Specifications: Input Power: 18 Volt Max torque: 60 Nm 24 Stage Chuck Capacity: 1.5
- 13mm Drilling Capacity: Wood: 38mm Steel: 13mm Concrete: 13mm Speed at no load: -450/0-1650 /min Impact rate: 0-5, 850
- 21, 450bpm

...

AEG BSB 18 Heavy-Duty Cordless combi drill with PRO-Lithium batteries for high torque applications with a two speed gearbox. The 24 stage clutch adjustment allows for complete control & the FIXTEC 13mm Rohm full metal chuck maintains grip in the toughest of appplications. Specifications: Input Power: 18 Volt Max torque: 70 Nm 24 Stage Chuck Capacity: 1.5
- 13mm Drilling Capacity: Wood: 55mm Steel: 13mm Concrete: 16mm Speed at no load (1st/2nd gear) 0-450/0-1600 /min Impact rate: 0-7, 200
- 25, 600bpm BSB 18 LI 3 P is supplied with: 2 x 3.0 Ah PRO-Lithium Batteries 1 x AL1218 Charger

...

The AEG BSB18G 18 volt Combi Hammer Drill has the following features ; Compact & powerful for completion of all jobsite applications. 50 Nm maximum torque which delivers complete power. 2 Speeds: 0-400 rpm / 0-1, 500 rpm. 24 stage torque adjustment which delivers optimal control for the user. Fixtec 13 mm single sleeve chuck with full metal jaws. Overload protection. 3 mode selector for ease of use between applications. Ni Cd 18 volt power pack. Standard drilling, masonry & screwdriving
- all from one power tool. Specifications: Chuck: 13 mm Keyless. No Load Speed: 0-400 / 0-1, 500/min. Max torque: 47 Nm 24 stage. Capacity: Wood: 34mm, Steel: 13mm, Concrete: 12mm. Weight: 1.9 kg. Supplied in a kit box with 100 popular accessories.
...

The AEG BSB 18GL is a compact & powerful Combi Drill which is suitable for all jobsite applications. The drill has 2 speeds (0-400/min & 0-1, 500/min) & a 3 mode selector for ease of use between applications. The 50 Nm maximum torque delivers complete power, & the 24-stage torque adjustment delivers optimal control for the user. The drill has a Fixtec 13 mm single sleeve chuck with full metal jaws & overload protection for safety. The 18GL 1KITX Combi Drill kit is supplied with a p owerful, fade free lithium-ion 18 volt power pack & charger, along with 100 drill accessories. The 100-piece accessory set

Includes:: the following: 17 x Metal drill bits: 2mm (x 2), 2.5mm, 3mm (x 2), 3.5mm, 4mm (x 2), 4.5mm, 5mm (x 2), 5.5mm, 6mm (x 2), 6.5mm 7mm & 8mm. 9 x Masonry drill bits: 4mm, 5mm, 5.5mm, 6mm (x 2), 7mm, 8mm, 9mm & 10mm. 8 x Wood drill bits: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm & 10mm. 5 x Flat bits: 16mm, 20mm, 22mm, 25mm & 32mm. 7 x Hex socket bits: 5mm, 6mm, 1/4 inch, 5/16 inch, 8mm, 3/8 inch & 10mm. 9 x 25mm Phillips screwdriver bits: PH1 (x 2), PH2 (x 4) & PH3 (x 3). 6 x 25mm Slotted screwdriver bits: 6mm (x 2), 8mm (x 2) & 10mm (x 2). 10 x 25mm Pozidriv screwdriver bits: PZ1 (x 2), PZ2 (x 5) & PZ3 (x 3). 12 x 25mm Torx screwdriver bits: T10 (x 2), T15 (x 3), T20 (x 3), T25 (x 2), T30 & T40. 4 x 25mm Hex screwdriver bits: 3mm, 4mm, 5mm & 6mm. 3 x 50mm Phillips screwdriver bits: PH1, PH2 & PH3. 3 x 50mm Slotted screwdriver bits: 6mm, 8mm & 10mm. 3 x 50mm Torx screwdriver bits: T20, T25 & T30. 3 x 50mm Pozidriv screwdriver bits: PZ1, PZ2 & PZ3. 1 x bit adaptor. Supplied in a tough plastic storage case

...

The A.E.G. BSS 18 C Li is a powerful 18 volt impact driver which features the AEG Pro Lithium Ion battery technology with overload protection for maximum durability of battery & tool. It has a single speed motor making this impact driver ideal for screw driving applications around the home or work site. The A.E.G. BSS 18 C Li is lightweight yet strong, due to the advanced motor technology & compact design, it is a ideal for decking jobs as you can impact the screws home without much pressure. It will deliver 3, 100 impacts per minute. Fitted with soft-grip trigger, Microtexture rubber overmould for superior grip & comfort & a built-in LED light at the front for those poorly lit areas or on site where there may be no power supply. This machine will take an easy-slide type battery & has an easy loading action. Batteries can be removed with the slightest of pressure for quick & easy battery changes. Ultra compact impact driver measuring 145mm in length, powerful new frameless motor delivering 158 Nm maximum torque Specifications: Bit holder: 1/4in hex. Speed: 0-2, 400. Impact: 0-3, 100 bpm. Torque: 158 Nm. Weight: 1.6 kg. 2 x 1.5 Ah PRO Li-Ion batteries. 1 x Charger 1 x Kitbox 1 x Instructions ...