AEG BS12C compact drill driver has a 17 stage adjustable torque dial so you get the same consistency when drilling delicate work pieces, this helps to cut down the risk of damaging your work. Also fitted with soft grip trigger & handle for your comfort & a built in LED light at the front for those poorly lit areas or on site where power may not be available. This machine has an easy magazine battery type loading action & is easily removed with the slightest of pressure for quick battery changes. Voltage: 12 Volt. No load speed: 0-350 & 0-1500 Max torque: 34 Nm. Chuck: 10mm Keyless. Drilling: Steel: 10mm Soft wood: 20mm. Weight: 1.2 kg. Charge time: 30 minutes. Available in One or Two Battery Versions. The AEG PRO Li THIUM ION technology protects both battery & machine in 3 ways: 1) Thermal Overload protection The thermal overload protection constantly monitors the temperature of the battery & automatically safeguards against overheating, therefore increasing the life of the battery pack. 2) Current Overload protection Too much current draw can permanently damage the cells of the battery thus reducing battery life. The Pro Lithium Ion current overload protection automatically shuts the battery down if the current levels get too high, but automatically resets its self so there is no loss of productivity. 3) Individual cell monitoring Individual cell monitoring ensures every cell in the battery is performing to its maximum capability to ensure optimum productivity. The cell monitoring also runs throughout the charge process to make sure no cells are damaged at this time. The AEGBS12C2KIT is supplied in a Plastic Carry Case Containing 100 Pce Bit set, 2 x 1.5 Ah Pro Li-ion Batteries, Charger, Torch (Bare Unit) & Trimming Knife with 5 Spare Blades. ...

AEG BS12C compact drill driver has a 17 stage adjustable torque dial so you get the same consistency when drilling delicate work pieces, this helps to cut down the risk of damaging your work. Also fitted with soft grip trigger & handle for your comfort & a built in LED light at the front for those poorly lit areas or on site where power may not be available. This machine has an easy magazine battery type loading action & is easily removed with the slightest of pressure for quick battery changes. Voltage: 12 Volt. No load speed: 0-350 & 0-1500 Max torque: 34 Nm. Chuck: 10mm Keyless. Drilling: Steel: 10mm Soft wood: 20mm. Weight: 1.2 kg. Charge time: 30 minutes. Available in One or Two Battery Versions. The AEG PRO Li THIUM ION technology protects both battery & machine in 3 ways: 1) Thermal Overload protection The thermal overload protection constantly monitors the temperature of the battery & automatically safeguards against overheating, therefore increasing the life of the battery pack. 2) Current Overload protection Too much current draw can permanently damage the cells of the battery thus reducing battery life. The Pro Lithium Ion current overload protection automatically shuts the battery down if the current levels get too high, but automatically resets its self so there is no loss of productivity. 3) Individual cell monitoring Individual cell monitoring ensures every cell in the battery is performing to its maximum capability to ensure optimum productivity. The cell monitoring also runs throughout the charge process to make sure no cells are damaged at this time. This AEG BS12C2L1 has 1 x PRO Li-Ion 1.5 Ah battery. Complete with Carry Bag. ...

AEG BS12C compact drill driver has a 17 stage adjustable torque dial so you get the same consistency when drilling delicate work pieces, this helps to cut down the risk of damaging your work. Also fitted with soft grip trigger & handle for your comfort & a built in LED light at the front for those poorly lit areas or on site where power may not be available. This machine has an easy magazine battery type loading action & is easily removed with the slightest of pressure for quick battery changes. Voltage: 12 Volt. No load speed: 0-350 & 0-1500 Max torque: 34 Nm. Chuck: 10mm Keyless. Drilling: Steel: 10mm Soft wood: 20mm. Weight: 1.2 kg. Charge time: 30 minutes. Available in One or Two Battery Versions. The AEG PRO Li THIUM ION technology protects both battery & machine in 3 ways: 1) Thermal Overload protection The thermal overload protection constantly monitors the temperature of the battery & automatically safeguards against overheating, therefore increasing the life of the battery pack. 2) Current Overload protection Too much current draw can permanently damage the cells of the battery thus reducing battery life. The Pro Lithium Ion current overload protection automatically shuts the battery down if the current levels get too high, but automatically resets its self so there is no loss of productivity. 3) Individual cell monitoring Individual cell monitoring ensures every cell in the battery is performing to its maximum capability to ensure optimum productivity. The cell monitoring also runs throughout the charge process to make sure no cells are damaged at this time. This AEG BS12C2L2 has 2 x PRO Li-Ion 1.5 Ah batteries in a kit box. ...

The A.E.G. BS 18CL, with PRO Li-Ion battery technology is a powerful 18 volt compact drill driver with a 23-stage torque adjustment an additional drilling stage which provides greater flexibility & precision whatever the material & screw size. The BS18C has the most up to date electronic switch with variable speed for enhanced accuracy & less damage to screw heads. The two-speed planetary synchromesh gear is a unique design & gives this drill driver maximum torque. This drill driver has a strong metal 1.5-13mm keyless chuck for comfortable one handed bit & drill changing. A.E.G have combined power & comfort with the most up to date ergonomic soft-grip handle design for more comfortable use. The drill driver has a buil-in LED light for illuminating the workpiece. Batteries are changed easily by sliding them on & off. Specifications: LED light. Intergrated clutch. Chuck: 13mm Keyless. Speed, Two speed gearbox: 0-450/0-1, 650/min. Torque: 60 Nm, 23 Settings. Capacity: Steel: 13mm, Wood: 36mm. Weight: 1.7kg. The AEG PRO Li THIUM ION technology protects both battery & machine in 3 ways: 1) Thermal Overload protection The thermal overload protection constantly monitors the temperature of the battery & automatically safeguards against overheating, therefore increasing the life of the battery pack. 2) Current Overload protection Too much current draw can permanently damage the cells of the battery thus reducing battery life. The Pro Lithium Ion current overload protection automatically shuts the battery down if the current levels get too high, but automatically resets its self so there is no loss of productivity. 3) Individual cell monitoring Individual cell monitoring ensures every cell in the battery is performing to its maximum capability to ensure optimum productivity. The cell monitoring also runs throughout the charge process to make sure no cells are damaged at this time. The AEGBS18CL3P is supplied with 2 x 3.0 Ah PRO Li-Ion Batteries ...