Filters

Filters

Available
Screenclean Excel 1L
    Car screen clean. Removes
    traffic film and flies.
    To keep your vehicle
    windscreen in top tip
    spotless condition, you
    need Decosol DEC25XLS all
    weather Screenclean
    Excel, just use less
    fluid and more water to
    get a good ratio mixture,
    making anything up to 50
    litres per bottle. This
    is especially desired in
    colder climates where a
    thin layer of ice or
    frost accumulates on the
    windscreens surface,
    eliminating the need to
    manually scrape the
    windshield or pour warm
    water on the glass. The
    Decosol DEC25XLS comes in
    a handy re-sealable 1
    litre container for ease
    of pouring, and can be
    stored very easily on a
    garage shelf, it also
    has a Non smearing
    formulation additive to
    keep the screen squeaky
    clean and free from road
    grime and bugs, with the
    added benefit of non
    freezing at temperatures
    up to minus -24 Size: 1
    Litre. No smear
    formulation. For use in
    all weather conditions.
    Makes up to 50 litres.
    Non freezing at
    tempratures up to minus
    -24.
Availability: In Stock
£5.16
Available
Evercryl One Coat Grey 2.5Kg
    Evercryl One Coat is a
    resin based, fibre
    reinforced roof repair
    compound which is
    effective on all common
    roofing surfaces and
    types, giving an instant
    roof repair even in the
    wet and on wet surfaces.
    May also be applied in
    frosty conditions down to
    -5°C. Evercryl One
    Coat is instantly
    waterproof when applied,
    so there is no fear of
    washoff, so emergency
    leaks can be tackled
    immediately as there is
    no need to wait for the
    rain to stop. Evercryl
    One Coat is brush applied
    and dries to a smooth
    seamless flexible
    membrane which resists
    algae and fungal growth.
    Because of the high level
    of fibre re-enforcement,
    Evercryl One Coat will
    bridge small cracks and
    requires only a one-coat
    brush application to give
    instant and total water
    protection, even in
    areas subject to ponding.
    Evercryl One Coat
    requires no primer on
    sound non-porous
    surfaces. BENEFITS - May
    be applied in damp and
    wet conditions -
    Formulated from lightfast
    acrylic polymers to
    withstand sunlight for
    longer periods than
    traditional bitumen
    coatings - Fibre
    re-enforced to bridge
    small cracks - Primerless
    adhesion to most
    bituminous and non porous
    surfaces. AREAS FOR USE -
    General sealing,
    maintenance, repair and
    waterproofing of most
    common roofs in wet or
    dry conditions - for use
    on concrete,
    fibre/cement, roofing
    felt mastic asphalt,
    existing bituminous roof
    coatings, rigid uPVC
    corrugated iron, metals,
    slates, brickwork,
    tiles, lead, copper and
    zinc. - Waterproofing
    guttering (plastic and
    metal) downpipes, gully,
    flashings, upstands,
    vents and leadwork. Grey
    2.5kg
Availability: In Stock
£26.02
Available
3.10 x 80mm Galvanised Smooth Shank 33° Nails & Fuel (2200)
    PT PaperTape Series
    Smooth Shank Clipped Head
    33° Nails & Fuel.
    Profile: Smooth Smooth
    shank nails have exactly
    that: a smooth
    appearance. Due to their
    regular form they can be
    produced at very high
    speed and are therefore
    the most economical type
    of nail. However, their
    holding power is the
    lowest of the group. They
    require less energy to
    drive them and the air
    consumption per nail can
    be lower. Sometimes it is
    possible to use a smaller
    tool to drive them.
    Finish: Plain Plain
    finish is without any
    form of protection and is
    the most economical
    choice, but the nails
    will start to rust before
    nails that have a
    protective treatment.
    Used in applications
    where no protection is
    required, for example a
    one way disposal pallet.
    Finish: Galvanised
    Galvanised Nails.
    Galvanising, or coating
    with Zinc, is the best
    way to prevent nails from
    corroding. The zinc does
    not protect the steel of
    the nail, but is
    corroded first. The
    thicker the zinc coating,
    the longer it will be
    before the nail is
    attacked. The thickest
    coating is called hot
    dipped and is applied by
    dipping the nails into a
    bath of molten zinc.
    Paper Tape Collated Stick
    Nails, this type of
    collation is ideal in
    construction environments
    where work can be kept
    free of collation debris.
    Paper tape nails
    traditionally have a
    clipped head to allow the
    shanks of the nails to
    touch each other when
    they are collated. In
    this way it is possible
    to fit more nails on a
    stick. Gauge/Diameter
    (mm) 3.1 Length 80
    Clipped Head 33° SKU
    PT3180G12FC Profile
    SMOOTH Finish GALV
    Description Galvanised
    Smooth Shank 3.1 x 80mm
    Nails Fuel Cell Qty per
    box 2200 Will also fit
    GF33PT-E, GF33PT-U
Availability: In Stock
£73.46
Available
E16C Curved Claw Hammer - Leather Grip 450g 16oz
    Solid one-piece forged
    steel construction with
    handle grip made from
    sole leather washers
    pressed on and riveted.
    The conventional
    carpenters curved claw
    hammer has excellent
    balance and the grip is
    polished and double
    lacquered. Weight 450g (1
    lb)
Availability: In Stock
£29.28
Available
1-100-10-1-0 Hand Bastard Cut File 10in
    For filing flat surfaces,
    sharp corners and
    shoulders as well as for
    deburring. A double cut
    file should be used for
    work in high-alloy tool
    steels. Also useful for
    the sharpening of heavy
    implements. High removal
    rate. Double cut on both
    sides - with one safe
    edge (a safe edge permits
    work in corners).
    Parallel sides but
    slightly tapered in
    thickness. Size
    250mm(10in) Cut: hand
    bastard Tanged
Availability: In Stock
£8.30
Available
26/70 70mm Diskus Padlock Keyed Alike EE0113
    Original Diskus design
    offers the highest level
    of protection restricting
    the usual method of
    manipulation. Where to
    use it: High security
    requirement in severe
    weather conditions The
    shackle is manufactured
    from hardened steel alloy
    and is protected in a
    stainless steel body. Key
    operated, key retaining
    (a key is needed for
    locking. Lock retains key
    until locked) The
    anti-cut plate provides
    360 degree protection
    from sawing while a top
    quality welded seam
    secures against impact
    attack. Overall diameter:
    71 mm Overall depth: 30
    mm Shackle width: 19.5 mm
    I.D. Shackle height: 17
    mm Shackle Dia: 10 mm
Availability: In Stock
£21.15
Available
65/50CS 50mm Brass Padlock Close Shackle Carded
    Body made from solid
    brass with the inner
    components being produced
    from non-corrosive
    materials. Shackle
    produced from hardened
    steel. Precision pin
    tumbler cylinder. Closed
    shackle produced from
    hardened steel. Precision
    pin tumbler cylinder.
    Overall width: 50 mm
    Overall height: 77 mm
    Overall depth: 18 mm
    Shackle width: 28 mm I.D.
    Shckle height: 29 mm
    Shackle Dia: 8 mm
Availability: In Stock
£11.75
Available
A.E.G. Power Tools BSS 18 CLI 18 Volt Ultra Compact Impact Driver 2 x 3.0Ah Pro Li-Ion
    The A.E.G. BSS 18CLi is a
    powerful 18 volt impact
    driver which features the
    AEG Pro Lithium Ion
    battery technology with
    overload protection for
    maximum durability of
    battery and tool. It has
    a single speed motor
    making this impact driver
    ideal for screw driving
    applications around the
    home or work site. The
    A.E.G. BSS 18CLi is
    lightweight yet strong,
    due to the advanced motor
    technology and compact
    design, it is a ideal
    for decking jobs as you
    can impact the screws
    home without much
    pressure. It will deliver
    3, 100 impacts per
    minute. Fitted with
    soft-grip trigger,
    Microtexture rubber
    overmould for superior
    grip and comfort and a
    built-in LED light at the
    front for those poorly
    lit areas or on site
    where there may be no
    power supply. This
    machine will take an
    easy-slide type battery
    and has an easy loading
    action. Batteries can be
    removed with the
    slightest of pressure for
    quick and easy battery
    changes. Ultra compact
    impact driver measuring
    145mm in length,
    powerful new frameless
    motor delivering 158 Nm
    maximum torque
    Specifications: Bit
    holder: 1/4in hex. Speed:
    0-2, 400. Impact: 0-3,
    100 bpm. Torque: 158Nm.
    Weight: 1.6 kg.
Availability: In Stock
£326.69
Available
2430 Micro Reel + 10 Metre Hose + Gun + Fittings
    This compact micro reel
    is perfect for smaller
    gardens, patios or
    balconies. Key Features:
    Comes with 10m of 9mm
    garden hose. Includes a
    threaded tap connector to
    fit a 3/4 inch or 1/2
    inch tap. Also includes a
    hose connector to connect
    the hose to the tap and a
    waterstop connector to
    fit the hose to the gun.
    The gun allows you to
    choose a jet spray,
    perfect for cleaning, or
    a multi spray, perfect
    for watering plants. The
    reel has a fold away
    handle allowing you to
    hang over the tap or a
    nail in the wall.
Availability: In Stock
£16.61
Available
Draper Pocket Air Blow Gun
    Pocket-sized blow gun
    suitable for cleaning
    liquid, swarf or dust
    during manufacturing or
    assembly processes. Flow
    is controlled by turning
    the knurled ring on the
    barrel. Supplied with
    1/4" BSP air inlet
    coupling and pocket clip.
    Maximum operating
    pressure 30psi (2bar).
    Display packed.
Availability: In Stock
£4.54
Available
FatMax Screwdriver Phillips 2 x 30mm Stubby
    The FatMax Phillips tip
    screwdrivers have a
    chrome vanadium steel bar
    allows high torque and
    reduces the risk of tip
    breakage and the handle
    is moulded directly to
    shaft for a virtually
    unbreakable bond - gives
    long life and durability.
    The soft-grip handle
    gives a perfect
    combination of great grip
    and reduced fatigue in
    use and is colour coded
    for easy identification
    of the right tip type for
    the application. The
    smooth domed end offers
    fast, comfortable
    spinning action and the
    large diameter handle
    offers higher torque when
    driving wood screws. Tip
    Size PH.2 Blade Length
    30mm
Availability: In Stock
£3.56
Available
Faithfull Chainsaw File Pre Pack 200mm x 5.5mm (8in x 7/32 in)
    Faithful Chainsaw Files
    are ideal for sharpening
    round hooked chainsaw
    teeth. They are perfect
    for professional and
    frequent DIY use and
    fitted with a comfortable
    handle. Supplied in a
    blister pack. FAIFIC732
    Chainsaw File has the
    following specifications:
    Cut: Single Cut. Blade
    Length: 200mm (8in).
    Blade Width: 5.5mm
    (7/32in).
Availability: In Stock
£2.83
Menu