About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
Stuart Models Puffin
Marine Engine Ready To
Run (34-50-10015)
£468.75
For customers who want to build their own boiler or have a very specific application we are able to offer the Puffin engine without a boiler. In a suitable installation a pair of Puffins could be used to power a twin screw boat. As with all our models, the Puffin engine is thoroughly tested before being dispatched. Engine Description: Ready to Run Puffin Marine Engine. Specifications: Length: 3 1/2 inches.
Width: 2 1/4 inches.
Height: 3 3/16 inches. Weight: 380 g. Bore: Twin 7/16 inch dia. Stroke: 7/16 inch. Contents: Puffin in-line twin cylinder oscillating engine with displacement lubricator, exhaust pipe, lubricator syringe & needle, cylinder oil, bearing lubricating oil & preservative fluid. Manufacturer: Stuart Models Model / Part No: Puffin Marine Engine Ready to Run (34-50-10015)

...
Archived Product
image missing
Stuart Models Puffin
Vertical Marine Power
Plant Ready To Run
Models (34-50-10090)
£897.75
Vertical power plants are well suited to launch style boats where their open decks allow for taller boilers. The plant is suitable for powering small steam launches of Approx. 3 feet length. As with all our models, it is supplied fully tested & complete with everything you need for running except water & gas. Engine Description: Ready to Run Puffin Horizontal Marine Power Plant Specifications: Length: 9 inches.
Width: 4 3/8 inches.
Height: 10 1/8 inches. Weight: 2.2 kgs. Cylinder Bore: Twin 7/16 inch dia. Cylinder Stroke: 7/16 inch. Contents: Power Plant: Puffin twin cylinder oscillating engine on a baseplate complete with vertical boiler & lubricator. Accessories: Gas burner, supply pipe, jet & disposable gas can valve. Exhaust pipe, boiler filling funnel, lubricator syringe & needle, cylinder oil, bearing oil, preservative fluid, boiler test certificate & instructions. Manufacturer: Stuart Models Model / Part No: Puffin Vertical Marine Power Plant Ready to Run Models (34-50-10090)

...
Archived Product
image missing
Stuart Models Real
Unmachined Set Of
Castings (34-50-71397)
£252.25
The Stuart Real is often called an "upside down" vertical engine, however this is not the case as the earliest vertical steam engines were arranged, like this model, with the crankshaft above the cylinder. The Real was designed by Mr. Andrew Smith towards the end of the 1970s & is based upon an engine that operated in a colliery for nearly one hundred years. Please remember our sets of castings require the use of a lathe & milling machine to turn them into a working steam engine. Engine Description: Stuart Real Set of Unmachined Castings, Materials, Fixings & Drawings. Specifications:

Height: 15 5/8 Inches. Flywheel Diameter: 7 Inches. Cylinder Bore: 1 Inch. Cylinder Stroke: 2 Inches. Contents: Cast Iron: Baseplate, entablature, pulley, crank, cylinder, valve chest & cover, top & bottom cylinder covers, piston, flywheel. Brass: Slide valve, eccentric strap, valve operating block, glands, conrod bush, crankshaft bearings. Steel: Crankshaft, connecting rod, eccentric sheave, eccentric rod, clevis, brace, crankpin, piston & valve rods, all materials for valve gear. Sundries: Detailed drawings, gaskets, viton ?O? ring, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Real Unmachined Set of Castings (34-50-71397)

...
Archived Product
image missing
Stuart Models S50
Machined Kits
(34-50-71316)
£403.00
The Stuart S50 is an elegant model ' Mill Engine' of the type used to power small factories in the north of England during the mid-nineteenth century. As with all Stuart Models machined kits it is supplied complete with a hand numbered certificate of authentication. Engine Description: Stuart S50 Machined Kit Specifications: Length: 8 1/2 inches. Flywheel Diameter: 3 inches. Bore: 5/8 inch. Stroke: 1 1/4 inches. Contents: Cast Iron: Soleplate, cylinder, valve chest & cover, front & rear cylinder covers, flywheel. Manufacturer: Stuart Models Model / Part No: S50 Machined Kits (34-50-71316) Brass: Slide valve, piston, eccentric strap, valve operating block, glands, crosshead. Steel: Crankshaft, crankwebb, connecting rod, eccentric sheave, eccentric rod, distance pieces, slide bars, crankpin, piston & valve rods. Sundries: Detailed drawings, gaskets, fibre washer, cylinder lagging, gland packing, fixings pack. ...
Archived Product
image missing
Stuart Models S50
Ready To Run Models
(34-50-71317)
£589.85
The Stuart S50 is an elegant model ' Mill Engine' of the type used to power small factories in the north of England during the mid-nineteenth century. As with all Stuart Models finished engines it is supplied ready to run complete with a hand numbered certificate of authentication. Engine Description: Ready to Run Stuart S50 Specifications: Length: 8 1/2 inches. Flywheel Dia.: 3 inches. Cylinder Bore: 5/8 inch. Cylinder Stroke: 1 1/4 inch. Contents: Cast Iron: Soleplate, cylinder, valve chest & cover, front & rear cylinder covers, flywheel. Brass: Slide valve, piston, eccentric strap, valve operating block, glands, crosshead, Oil cups. Steel: Crankshaft, crankwebb, connecting rod, eccentric sheave, eccentric rod, distance pieces, slide bars, crankpin, piston & valve rods. Sundries: Detailed drawings, gaskets, fibre washer, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: S50 Ready to Run Models (34-50-71317) ...
Archived Product
image missing
Stuart Models Score
Machined Kits
(34-50-71217)
£759.00
For many years we were asked to produce a twin cylinder horizontal engine, the Stuart Score was the answer. It is closely related to the Stuart D10 but is distinctive enough to be attractive in its own right. As with all Stuart Models Machined Kits it is supplied complete with a hand numbered certificate of authentication. Engine Description: Stuart Score Fully Machined Kit Specifications: Length: 6 Inches. Flywheel Diameter: 3 Inch Diameter. Bore: 3/4 Inch. Stroke: 3/4 Inch. Contents: Cast Iron: Boxbed, soleplate, cylinders, valve chests & covers, top & bottom cylinder covers, flywheel. Brass: Slide valves, pistons, connecting rods, eccentric rods, valve operating blocks, glands, crossheads, crankshaft bearings. Steel: Crankshaft, crankwebbs, eccentric sheaves, crosshead pins, piston & valve rods. Sundries: Detailed drawings, gaskets, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Score Machined Kits (34-50-71217) ...
Archived Product
image missing
Stuart Models Score
Ready To Run Models
(34-50-71218)
£1108.00
For many years we were asked to produce a twin cylinder horizontal engine, the Stuart Score was the answer. It is closely related to the Stuart D10 but is distinctive enough to be attractive in its own right. As with all Stuart Models finished engines it is supplied ready to run complete with a hand numbered certificate of authentication. Engine Description: Stuart Score Ready to Run Engine. Specifications: Length: 6 Inches. Flywheel: 3 Inch Diameter. Bore: 3/4 Inch. Stroke: 3/4 Inch. Contents: Cast Iron: Boxbed, soleplate, cylinders, valve chests & covers, top & bottom cylinder covers, flywheel. Brass: Slide valves, pistons, connecting rods, eccentric rods, valve operating blocks, glands, crossheads, crankshaft bearings. Steel: Crankshaft, crankwebbs, eccentric sheaves, crosshead pins, piston & valve rods. Sundries: Detailed drawings, gaskets, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Score Ready to Run Models (34-50-71218) ...
Archived Product
image missing
Stuart Models Score
Unmachined Set Of
Castings (34-50-712160
£171.99
For many years we were asked to produce a twin cylinder horizontal engine, the Stuart Score was the answer. It is closely related to the Stuart D10 but is distinctive enough to be attractive in its own right. To assist the beginner the book Building a Vertical Steam Engine. is available. It describes in detail the machining of all the components, & is full of advice for the more challenging operations. Please remember our sets of castings require the use of a lathe & milling machine to turn them into a working steam engine. Engine Description: Stuart Score Set of Unmachined Castings, Materials, Fixings & Drawings. Specifications: Length: 6 Inches. Flywheel Diameter: 3 Inches. Bore: 3/4 Inch Diameter. Stroke: 3/4 Inch. Contents: Cast Iron: Boxbed, soleplate, cylinders, valve chests & covers, top & bottom cylinder covers, flywheel. Brass: Slide valve, piston, connecting rod, eccentric rod, valve operating block, glands, crosshead, crankshaft bearings. Steel: Crankshaft, crankwebbs, eccentric sheave, crosshead pin, piston & valve rods. Sundries: Detailed drawings, gaskets, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Score Unmachined Set of Castings (34-50-712160 ...
Archived Product
image missing
Stuart Models Shaping
Machine Unmachined Set
Of
Castings (34-50-74050)
£156.85
The Stuart Shaping Machine faithfully reproduces the design of single crank shapers that were still in use well into the mid 20th century. The clapper box can be raised & lowered to adjust the amount of material being removed, in the same manner as the full sized machines. Engine Description: Stuart Shaping Machine set of castings, materials, fixings & drawings. Specifications:

Height: 6 1/2 inches.
Width: 4 1/2 inches. Length: 4 inches. Contents: Cast Iron: Body, ram, table, pulley. Bronze: Bushes. Steel: Apron assembly, clapper box assembly, connecting rod, crank assembly, sadle, lead screws, ram pivot pin, slide bed, handles, handwheel. Sundries: Detailed drawings, fixings pack. Manufacturer: Stuart Models Model / Part No: Shaping Machine Unmachined Set of Castings (34-50-74050)


...
Archived Product
image missing
Stuart Models Steam
Boiler Feed Pump
Unmachined Set
Of Castings
(34-50-72475)
£85.99
The Steam Boiler Feed Pump is a most interesting model to build requiring good workmanship. The pumping parts are gunmetal & stainless steel. The pump will work at speeds from 200 to 10 strokes per minute. The stroke may be shortened by moving the two collars closer together. Engine Description: Steam Boiler Feed Pump Set of Unmachined Castings, Fixings & Drawings. Specifications: Length: 6 Inches. Bore: 1/2 Inch. Stroke: 3/4 Inch. Contents: Cast Iron: Frame. Gunmetal: Tappet, back cover, front cover, steam chest, cylinder pump body, pump head. Sundries: Detailed drawings, gasket material, aluminium lagging, fixings pack. Manufacturer: Stuart Models Model / Part No: Steam Boiler Feed Pump Unmachined Set of Castings (34-50-72475) ...
Archived Product

Stuart Models S50 Unmachined Set Of Castings (34-50-71315)

The Stuart S50 is an elegant model of a typical mill engine, as used in the North of England, to power small factories throughout the 19th and Early 20th Centuries. The Stuart S50 is an ideal "first time" model engineering project. It is supplied as a full set of castings together with all the materials, fixings and drawings needed to finish the model. Please remember our sets of castings require the use of a lathe and milling machine to turn them into a working steam engine. Engine Description: Stuart S50 Set of Unmachined Castings, Materials, Fixings and Drawings. Specifications:Length: 8 1/2 Inches.Flywheel: 3 Inches.Bore: 5/8 Inch.Stroke: 1 1/4 Inches. Contents: Cast Iron: Soleplate, cylinder, valve chest and cover, front and rear cylinder covers, flywheel.Brass:
Slide valve, piston, eccentric strap, valve operating block, glands, crosshead.Steel: Crankshaft, crankwebb, connecting rod, eccentric sheave, eccentric rod, distance pieces, slide bars, crankpin, piston and valve rods.Sundries: Detailed drawings, gaskets, fibre washer, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuart ModelsModel / Part No: S50 Unmachined Set of Castings (34-50-71315)
RIP - This product is no longer available on our network. It was last seen on 10.03.2012

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£85.99
creative toys Creative Toys
Description Reviews / Comments Add New

Product Description

The Stuart S50 is an elegant model of a typical mill engine, as used in the North of Engl&, to power small factories throughout the 19th & Early 20th Centuries. The Stuart S50 is an ideal "first time" model engineering project. It is supplied as a full set of castings together with all the materials, fixings & drawings needed to finish the model. Please remember our sets of castings require the use of a lathe & milling machine to turn them into a working steam engine. Engine Description: Stuart S50 Set of Unmachined Castings, Materials, Fixings & Drawings. Specifications: Length: 8 1/2 Inches. Flywheel: 3 Inches. Bore: 5/8 Inch. Stroke: 1 1/4 Inches. Contents: Cast Iron: Soleplate, cylinder, valve chest & cover, front & rear cylinder covers, flywheel. Brass: Slide valve, piston, eccentric strap, valve operating block, glands, crosshead. Steel: Crankshaft, crankwebb, connecting rod, eccentric sheave, eccentric rod, distance pieces, slide bars, crankpin, piston & valve rods. Sundries: Detailed drawings, gaskets, fibre washer, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: S50 Unmachined Set of Castings (34-50-71315)

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Brass - A copper and Zinc Alloy
Engine - A machine designed to convert fuel into motion
Steel - An alloy made predominately of Iron combined with <2% carbon
Inch - Equivalent to approximately 2.5cm
England - A country within the United Kingdom.
iron - An electrical deviced used for removing creases from fabrics
iron - A chemical element (FE). The most common element on earth
Steam - Steam - water in gas form, water vapour. Commonly seen coming from a kettle
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Small - something that takes up less space than normal.
Mill - A building which can grind grain into flour.
Valve - An opening and closing to control the movement of fluid through pipes.
Fixings - An action of sticking an item to another surface.
Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.
Ideal - Something that satisfies a perfect criteria.

Supplier Information

My Hobby Store
MyHobbyStore publishes some of the most well known specialist hobby magasines in the UK and are responsible for some of the most loved events on model hobbies and woodworking. MyHobbyStore are passionate about specialist hobby needs which is why they supply a wide range of hobby supplies at the best prices.

A huge range including:
Model Boat Kits
Model Aircraft kits
Model Cars
Engineering Kits.

The range of kits they supply is very diverse including static models, petrol powered, electric and steam.

Delivery is around 7 days.
Page Updated: 2012-02-04 02:03:29

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu