About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
Stuart Models S50
Machined Kits
(34-50-71316)
£403.00
The Stuart S50 is an elegant model ' Mill Engine' of the type used to power small factories in the north of England during the mid-nineteenth century. As with all Stuart Models machined kits it is supplied complete with a hand numbered certificate of authentication. Engine Description: Stuart S50 Machined Kit Specifications: Length: 8 1/2 inches. Flywheel Diameter: 3 inches. Bore: 5/8 inch. Stroke: 1 1/4 inches. Contents: Cast Iron: Soleplate, cylinder, valve chest & cover, front & rear cylinder covers, flywheel. Manufacturer: Stuart Models Model / Part No: S50 Machined Kits (34-50-71316) Brass: Slide valve, piston, eccentric strap, valve operating block, glands, crosshead. Steel: Crankshaft, crankwebb, connecting rod, eccentric sheave, eccentric rod, distance pieces, slide bars, crankpin, piston & valve rods. Sundries: Detailed drawings, gaskets, fibre washer, cylinder lagging, gland packing, fixings pack. ...
Archived Product
image missing
Stuart Models S50
Ready To Run Models
(34-50-71317)
£589.85
The Stuart S50 is an elegant model ' Mill Engine' of the type used to power small factories in the north of England during the mid-nineteenth century. As with all Stuart Models finished engines it is supplied ready to run complete with a hand numbered certificate of authentication. Engine Description: Ready to Run Stuart S50 Specifications: Length: 8 1/2 inches. Flywheel Dia.: 3 inches. Cylinder Bore: 5/8 inch. Cylinder Stroke: 1 1/4 inch. Contents: Cast Iron: Soleplate, cylinder, valve chest & cover, front & rear cylinder covers, flywheel. Brass: Slide valve, piston, eccentric strap, valve operating block, glands, crosshead, Oil cups. Steel: Crankshaft, crankwebb, connecting rod, eccentric sheave, eccentric rod, distance pieces, slide bars, crankpin, piston & valve rods. Sundries: Detailed drawings, gaskets, fibre washer, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: S50 Ready to Run Models (34-50-71317) ...
Archived Product
image missing
Stuart Models S50
Unmachined Set Of
Castings (34-50-71315)
£85.99
The Stuart S50 is an elegant model of a typical mill engine, as used in the North of Engl&, to power small factories throughout the 19th & Early 20th Centuries. The Stuart S50 is an ideal "first time" model engineering project. It is supplied as a full set of castings together with all the materials, fixings & drawings needed to finish the model. Please remember our sets of castings require the use of a lathe & milling machine to turn them into a working steam engine. Engine Description: Stuart S50 Set of Unmachined Castings, Materials, Fixings & Drawings. Specifications: Length: 8 1/2 Inches. Flywheel: 3 Inches. Bore: 5/8 Inch. Stroke: 1 1/4 Inches. Contents: Cast Iron: Soleplate, cylinder, valve chest & cover, front & rear cylinder covers, flywheel. Brass: Slide valve, piston, eccentric strap, valve operating block, glands, crosshead. Steel: Crankshaft, crankwebb, connecting rod, eccentric sheave, eccentric rod, distance pieces, slide bars, crankpin, piston & valve rods. Sundries: Detailed drawings, gaskets, fibre washer, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: S50 Unmachined Set of Castings (34-50-71315) ...
Archived Product
image missing
Stuart Models Score
Machined Kits
(34-50-71217)
£759.00
For many years we were asked to produce a twin cylinder horizontal engine, the Stuart Score was the answer. It is closely related to the Stuart D10 but is distinctive enough to be attractive in its own right. As with all Stuart Models Machined Kits it is supplied complete with a hand numbered certificate of authentication. Engine Description: Stuart Score Fully Machined Kit Specifications: Length: 6 Inches. Flywheel Diameter: 3 Inch Diameter. Bore: 3/4 Inch. Stroke: 3/4 Inch. Contents: Cast Iron: Boxbed, soleplate, cylinders, valve chests & covers, top & bottom cylinder covers, flywheel. Brass: Slide valves, pistons, connecting rods, eccentric rods, valve operating blocks, glands, crossheads, crankshaft bearings. Steel: Crankshaft, crankwebbs, eccentric sheaves, crosshead pins, piston & valve rods. Sundries: Detailed drawings, gaskets, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Score Machined Kits (34-50-71217) ...
Archived Product
image missing
Stuart Models Score
Ready To Run Models
(34-50-71218)
£1108.00
For many years we were asked to produce a twin cylinder horizontal engine, the Stuart Score was the answer. It is closely related to the Stuart D10 but is distinctive enough to be attractive in its own right. As with all Stuart Models finished engines it is supplied ready to run complete with a hand numbered certificate of authentication. Engine Description: Stuart Score Ready to Run Engine. Specifications: Length: 6 Inches. Flywheel: 3 Inch Diameter. Bore: 3/4 Inch. Stroke: 3/4 Inch. Contents: Cast Iron: Boxbed, soleplate, cylinders, valve chests & covers, top & bottom cylinder covers, flywheel. Brass: Slide valves, pistons, connecting rods, eccentric rods, valve operating blocks, glands, crossheads, crankshaft bearings. Steel: Crankshaft, crankwebbs, eccentric sheaves, crosshead pins, piston & valve rods. Sundries: Detailed drawings, gaskets, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Score Ready to Run Models (34-50-71218) ...
Archived Product
image missing
Stuart Models Shaping
Machine Unmachined Set
Of
Castings (34-50-74050)
£156.85
The Stuart Shaping Machine faithfully reproduces the design of single crank shapers that were still in use well into the mid 20th century. The clapper box can be raised & lowered to adjust the amount of material being removed, in the same manner as the full sized machines. Engine Description: Stuart Shaping Machine set of castings, materials, fixings & drawings. Specifications:

Height: 6 1/2 inches.
Width: 4 1/2 inches. Length: 4 inches. Contents: Cast Iron: Body, ram, table, pulley. Bronze: Bushes. Steel: Apron assembly, clapper box assembly, connecting rod, crank assembly, sadle, lead screws, ram pivot pin, slide bed, handles, handwheel. Sundries: Detailed drawings, fixings pack. Manufacturer: Stuart Models Model / Part No: Shaping Machine Unmachined Set of Castings (34-50-74050)


...
Archived Product
image missing
Stuart Models Steam
Boiler Feed Pump
Unmachined Set
Of Castings
(34-50-72475)
£85.99
The Steam Boiler Feed Pump is a most interesting model to build requiring good workmanship. The pumping parts are gunmetal & stainless steel. The pump will work at speeds from 200 to 10 strokes per minute. The stroke may be shortened by moving the two collars closer together. Engine Description: Steam Boiler Feed Pump Set of Unmachined Castings, Fixings & Drawings. Specifications: Length: 6 Inches. Bore: 1/2 Inch. Stroke: 3/4 Inch. Contents: Cast Iron: Frame. Gunmetal: Tappet, back cover, front cover, steam chest, cylinder pump body, pump head. Sundries: Detailed drawings, gasket material, aluminium lagging, fixings pack. Manufacturer: Stuart Models Model / Part No: Steam Boiler Feed Pump Unmachined Set of Castings (34-50-72475) ...
Archived Product
image missing
Stuart Models Steam
Hammer Unmachined Set
Of
Castings (34-50-71387)
£275.99
The Steam Hammer is based on Rigby's patented design & model engineers will enjoy the challenge of building an entirely different style of steam model. The completed engine can be easily run on a small boiler, the SH3 or SV3 being large enough, however, great care should be taken during operation as the stroke is very sensitive, ranging from a gentle tap to a powerful forging blow. Please remember our sets of castings require the use of a lathe & milling machine to turn them into a working steam engine. Engine Description: Stuart Steam Hammer set of Unmachined Castings, Materials, Fixings & Drawings. Specifications:
Height: 10 1/2 Inches.
Width: 7 Inches. Cylinder Bore: 1 Inch Diameter. Cylinder Stroke: 2 Inches. Contents: Cast Iron: Baseplate, mouth piece, column, anvil, piston, cylinder, top cylinder cover, valve chest. Brass: Glands, fork end. Steel: Piston & valve rods, all materials for valve gear & levers. Sundries: Detailed drawings, gasket material, viton "O" ring, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Steam Hammer Unmachined Set of Castings (34-50-71387)

...
Archived Product
image missing
Stuart Models Triple
Expansion Unmachined
Set Of
Castings (34-50-71225)
£686.20
The Stuart Triple is a very accurate model of a marine steam engine. It comes complete with working reverse gear, feed pump & condenser vacuum pump & is ideal for a scale steamer or tug, being a delight to watch under steam. The Stuart Triple is one of the most complex models in our range, however the time & effort is well invested as it is also one of the most attractive. Many of these engines are kept as display models, whilst others are built into dioramas recreating the engine room of a steam liner or large launch. Engine Description: Stuart Triple Expansion Set of Unmachined Castings, Fixings & Drawings. Specifications:
Height: 6 Inches. Discwheel Diameter: 2 1/4 Inches. Cylinder Bores: 3/4 Inch, 1 1/4 Inches & 1 3/4 Inches. Cylinder Stroke: 1 Inch. Contents: Cast Iron: Soleplate, cylinder castings, valve chests & covers, top & bottom cylinder covers, pistons, eccentric sheaves, counter balance weights, discwheel. Gunmetal: Slider bracket, connecting rod bearings, eccentric rods, slide valves, air pump castings, feed pump castings, stuffing box, glands, crossheads, crankshaft bearings. Sundries: Detailed drawings, cylinder lagging, gasket material, piston rings, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Triple Expansion Unmachined Set of Castings (34-50-71225)
...
Archived Product
image missing
Stuart Models Twin
Launch Unmachined Set
Of
Castings (34-50-71382)
£275.99
The Twin Launch is an ideal engine for the model engineer who has completed a number of projects & is looking for something a little more challenging. The advantage of the Twin Launch over the Compound is that it will self start, having no dead centres. The engine is designed to power a boat between four & a half & six feet long & is supplied as a set of castings complete with reverse gear, piston rings, fixings & fittings. Engine Description: Stuart Twin Launch Set of unmachined castings, fixings & drawings. Specifications:

Height: 5 1/2 Inches. Discwheel Diameter: 1 3/4 Inch. Cylinder Bore: 1 Inch. Cylinder Stroke: 7/8 Inch. Contents: Cast Iron: Cylinder casting, valve chests & covers, top & bottom cylinder covers, pistons, eccentric sheaves, discwheel. Gunmetal: Soleplae, slider bracket, connecting rods, eccentric rods, slide valves, flanges, glands, crossheads, crankshaft bearings. Sundries: Detailed drawings, cylinder lagging, gasket material, piston rings, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Twin Launch Unmachined Set of Castings (34-50-71382)

...
Archived Product

Stuart Models Score Unmachined Set Of Castings (34-50-712160

For many years we were asked to produce a twin cylinder horizontal engine, the Stuart Score was the answer. It is closely related to the Stuart D10 but is distinctive enough to be attractive in its own right. To assist the beginner the book Building a Vertical Steam Engine. is available. It describes in detail the machining of all the components, and is full of advice for the more challenging operations. Please remember our sets of castings require the use of a lathe and milling machine to turn them into a working steam engine. Engine Description: Stuart Score Set of Unmachined Castings, Materials, Fixings and Drawings. Specifications: Length: 6 Inches.Flywheel Diameter: 3 Inches.Bore: 3/4 Inch Diameter.Stroke: 3/4 Inch. Contents:Cast Iron: Boxbed, soleplate, cylinders, valve chests
and covers, top and bottom cylinder covers, flywheel.Brass: Slide valve, piston, connecting rod, eccentric rod, valve operating block, glands, crosshead, crankshaft bearings.Steel: Crankshaft, crankwebbs, eccentric sheave, crosshead pin, piston and valve rods.Sundries: Detailed drawings, gaskets, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuart ModelsModel / Part No: Score Unmachined Set of Castings (34-50-712160
RIP - This product is no longer available on our network. It was last seen on 10.03.2012

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£171.99
creative toys Creative Toys
Description Reviews / Comments Add New

Product Description

For many years we were asked to produce a twin cylinder horizontal engine, the Stuart Score was the answer. It is closely related to the Stuart D10 but is distinctive enough to be attractive in its own right. To assist the beginner the book Building a Vertical Steam Engine. is available. It describes in detail the machining of all the components, & is full of advice for the more challenging operations. Please remember our sets of castings require the use of a lathe & milling machine to turn them into a working steam engine. Engine Description: Stuart Score Set of Unmachined Castings, Materials, Fixings & Drawings. Specifications: Length: 6 Inches. Flywheel Diameter: 3 Inches. Bore: 3/4 Inch Diameter. Stroke: 3/4 Inch. Contents: Cast Iron: Boxbed, soleplate, cylinders, valve chests & covers, top & bottom cylinder covers, flywheel. Brass: Slide valve, piston, connecting rod, eccentric rod, valve operating block, glands, crosshead, crankshaft bearings. Steel: Crankshaft, crankwebbs, eccentric sheave, crosshead pin, piston & valve rods. Sundries: Detailed drawings, gaskets, cylinder lagging, gland packing, fixings pack. Manufacturer: Stuart Models Model / Part No: Score Unmachined Set of Castings (34-50-712160

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Brass - A copper and Zinc Alloy
Diameter - A measurement across a circle passing through the middle
Engine - A machine designed to convert fuel into motion
Steel - An alloy made predominately of Iron combined with <2% carbon
Inch - Equivalent to approximately 2.5cm
iron - An electrical deviced used for removing creases from fabrics
iron - A chemical element (FE). The most common element on earth
Steam - Steam - water in gas form, water vapour. Commonly seen coming from a kettle
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Components - Multiple items used to complete the product.
Bearings - A direction or a way someone moves around.
Valve - An opening and closing to control the movement of fluid through pipes.
Twin - A pair of people or animals that are born at the same time.
Fixings - An action of sticking an item to another surface.

Supplier Information

My Hobby Store
MyHobbyStore publishes some of the most well known specialist hobby magasines in the UK and are responsible for some of the most loved events on model hobbies and woodworking. MyHobbyStore are passionate about specialist hobby needs which is why they supply a wide range of hobby supplies at the best prices.

A huge range including:
Model Boat Kits
Model Aircraft kits
Model Cars
Engineering Kits.

The range of kits they supply is very diverse including static models, petrol powered, electric and steam.

Delivery is around 7 days.
Page Updated: 2012-02-04 02:03:29

Community Generated Product Tags

Eccentric sliding rod stuart d10 uk (1 person tagged the product this way)
Stuart s50 unmachined set of castings (1 person tagged the product this way)
Menu