Radio-controlled model sailing yacht With her streamlined hull & integral keel fin the elegant Comtesse is capable of an impressive turn of speed even in just a light breeze. However, the boat can still be sailed safely in stronger winds, as the deep keel makes it impossible to capsize. The boat handes nicely balanced, making it easy for the newcomer to model sailing to trim it accurately. As you would expect, the Comtesse can cope with all headings from tacking into wind right round to sailing before the wind, which means that it is possible to sail the boat to any pre-determined point & then back again. The model is controlled by rudder & simultaneous adjustment of the mainsail & jib settings, i.e. all sailing manoeuvres can be carried out using a simple two-channel radio control system. The kit

Includes:: a moulded Plura hull, & all the other parts are pre-fabricated to ensure a short building time. Specification: Length: 950 mm
Width: 230 mm
Height: 1500 mm Total displacement: 3200 g Ballast weight: 1800 g Mast

Height: 1200 mm Sail area: 30.00 dm 2 Draught: 210.00 mm Manufacturer: Robbe Model: Robbe Sailing-Boat Comtesse (1-1072)





...

Radio-controlled semi-scale model of a mega-yacht to 1:25 scale The long, slim hull of the San Diego looks simply fantastic on the water. Fitted out with two powerful 700-size electric motors, with direct drive to a pair of contra-rotating surface-piercing propellers, the San Diego accelerates strongly & soon comes up onto the step & planes across the water. A pair of swivelling Navy Speed power systems provide excellent straight running characteristics combined with good manoeuvrability even in choppy water. The optional fittings set contains all you need to fit out your model with all the luxurious equipment featured by the full-size boat. Crew figures not included in the kit. Specification: Length: 1270 mm
Width: 250 mm Scale: 1:25 Total displacement: 5000 g Manufacturer: Robbe Model: San Diego (1-1045)
...

Radio-controlled motor yacht to 1:20 scale The robbe San Remo is our model of an American luxury cabin cruiser. With its elegant ...

Almost ready to sail model yacht " Made in Germany" You would like a sporty & fast model boat, where quality & service count, & where one can easily obtain spares parts – then decide on " Made in Germany". Development & Manufacture of Sea Diamond takes place at robbe Modellsport in Germany. All parts originate from Robbe. & to be able to get started quickly in the new Hobby, we have taken care of all the hard work for you. Hull & deck are bonded in the factory, steering, drive unit with 600 size power-motor & mountings for the radio gear are fully installed. The new Sea-Diamond caption only has install his choice of radio & affix the decals – & off you go. Specification: Length: 645 mm
Width: 220 mm
Height: 190 mm Total displacement: 1400 g Manufacturer: Robbe Model: Robbe Sea Diamond (1-1127)

...

Racy water sportsman with brushless electric drive After many successful years, the time is ripe for a successor to the robbe Sea-Jet
-
...

Radio-controlled model sailing yacht to 1:10 scale The Smaragd (Emerald) is a large model which can be sailed even in quite strong winds, & in its basic version can be controlled with a simple two-channel radio control system. The carefully optimised arrangement of the sail area allows the boat to achieve the maximum speed possible from the hull design even in moderate winds & on all headings. If you enjoy making use of exotic auxiliary functions, you may fit an optional Genoa or Blister sail in place of the standard jib. The setting of the Genoa (enlarged foresail) is adjusted by means of an additional sailwinch, & it provides advantages above all in light to moderate winds on all tacks. The blister is a foresail with a generous belly, sewn in bands, whose spherical shape develops considerable thrust in light to moderate winds. In contrast to a spinnaker, which normally has to be lowered when the boat is luffing, the blister can be left deployed, as it can be used in a similar fashion to the Genoa when its luff is close-hauled via transmitter control. Optional Standard Sail area: approx. 80 dm 2 Sail area with Genoa: approx. 94 dm 2 Sail area with Blister: approx. 94 dm 2 Specification: Length: 1380 mm
Width: 360 mm
Height: 2200 mm Scale: 1:10 Total displacement: 12000 g Ballast weight: 8000 g Mast

Height: 1800 mm Draught: 300.00 mm Manufacturer: Robbe Model: Robbe Smaragd (1-1076)



...

Radio-controlled scale sounding boat to 1:25 scale, matching the Norderney survey ship The Möwe is the ideal complement to the Norderney survey ship, as it can be carried on board the mother ship, but also run independently. However, equipped with a simple 2-channel system it can also be operated as a st&-alone model. The boat can even be run without radio control. Specification: Length: 260 mm
Width: 105 mm Scale: 1:25 Total displacement: 300 g Manufacturer: Robbe Model: Robe Sounding Boat Moewe (1-1037)
...

Scale model of the marine emergency cruiser " Berlin" to 1:25 scale The SK " Berlin" is one of the most modern of the rescue ships operated by the German Association for the Rescue of the Shipwrecked (DGz RS). The boat was christened on the occasion of the Association’s 120 year anniversary in May 1985, & was commissioned at its base of Kiel/ Laboe. The boat was constructed at the Luerssen shipyard in Bremen using a special interlocking bulkhead system, & is built of seawater-resistant aluminium. The Berlin’s three engines with their total power of about 3200 BHP give her an impressive top speed of 24 knots. The SK’s hull is designed to allow her to operate & manoeuvre accurately at very high speeds in extremely heavy seas. Powerful fire monitors with a pumping capacity of 200 m 3 provide a highly effective fire fighting capability in case of emergency. The ship is equipped with a powerful bow thruster for extreme manoeuvrability, & it is also fitted with the very latest technical & communications equipment for use at sea. The Berlin also carries advanced medical equipment & facilities to provide first aid to injured mariners. In shallow waters the vessel’s versatility is increased by the daughter boat Steppke, which is carried on board. This little boat is extremely adaptable, & has been specially developed & equipped for work in shallow water conditions. Purpose of the DGz RSThe German Association for the Rescue of the Shipwrecked (DGz RS) is an independent body which carries out maritime search & rescue services under its own authority, & it has its own fleet of emergency sea cruisers & lifeboats. The lifeboatmen of the DGz RS are ready for work at any time & in any weather. Hardly a day goes past when they don’t hear the call "SOS.. . launch the lifeboats!" All search & rescue measures at sea are co-ordinated by the Bremen marine emergency management team. Without exception, the work of the rescue association is financed by donations & contributions from members, & no state funding or public backing is provided. The association’s patron is the Federal President of Germany. Crew figures not included. Model characteristics The robbe model of the ocean-going emergency cruiser " Berlin" is a true scale model of the full-size to 1:25 scale both in terms of appearance & technical functions. Like the original vessel the robbe model
Features: Three powerful, separately controlled engines 3-blade rudder system Powerful bow thruster Two fully articulated fire monitors equipped with a powerful pump Working daughter boat " Steppke"; can be operated independently Rise & fall stern flap Cable winch for retrieving the daughter boat Mechanism for engaging & releasing the tow cable Wide-ranging lighting system, e.g. searchlight, navigation lamps, towing light Several special function sets are available, so that the model can be fitted out in easy stages with all the optional fittings & auxiliary working systems. If you install all the optional equipment, you can carry out all manner of interesting operations on the water with your Berlin. Note that a separate RC system is required for the " Steppke". Specification: Length: 1100 mm
Width: 260 mm
Height: 610 mm Scale: 1:25 Total displacement: 7000 g Manufacturer: Robbe Model: Robbe SRK Berlin (1-1150)


...

True-to-life almost ready to run model of a river surveyor´s boat in 1:20 scale The original of the Bussard was used on the waterways in the Ruhr area by the water management authorities to carry out water checks for environmental purposes, to measure current speeds, to check & maintain channel markings & for many other different jobs. The model Size, appearance & features from the original provide the ideal template for the almost completely assembled model of the Bussard. In the case of the Bussard, almost completely assembled means that the boat has been factory assembled to the point that only some finishing work, such as applying decals & accessories & building in the remote control components need to be done by the owner. Even without any prior experience of modelling, it is possible to get the Bussard ready to go over a weekend. Thanks to the large-scale coloured decals which are part of the set, there is no need to paint this model. Specification: Length: 900 mm
Width: 210 mm
Height: 280 mm Total displacement: 2500 g Manufacturer: Robbe Model: Robbe Stromaufsichtsboot Bussard ARTR (1-1193)

...

Model submarine with electric power & dynamic diving system The Sea-Wolf is the longest serving model in our submarine fleet. Introduced many years ago, it began a successful period of submarine modelling for us which has lasted right up to the present day. In 1998 it was followed by the legendary Type VII boat, the U-47, & finally by our largest model, the Type XXI boat, the U-2540. The Sea-Wolf is the ideal submarine for all modellers, from the ambitious beginner through the modeller interested in a change of direction to the expert & connoisseur. After all, it offers an attractive combination of impressive appearance, reasonable building time & a fair system price. We have now revised this model in a number of significant details, to make it an even more interesting proposition. New features of the robbe Seal Wolf V2: Central pressure vessel screw connection, externally accessible (no hull section removal required) Kit

Includes:: electric motor, suppressors & cables Kit

Includes:: Lead ballast Revised decal sheet with more comprehensive details For additional information relating to the dynamic diving method, other models in the robbe submarine fleet etc., please refer to our current main catalogue. Only rudder & throttle functions are required for normal running & diving, which means that a two-channel system is sufficient. If a third channel is available, the hydroplanes can be controlled to over-ride the automatic depth system. This arrangement permits high-speed surface running & fast dives. Specification: Length: 900 mm
Width: 100 mm
Height: 320 mm Total displacement: 4100 g Manufacturer: Robbe Model: Robbe Submarine Seawolf V2 (1-1014)





...