Racy water sportsman with brushless electric drive After many successful years, the time is ripe for a successor to the robbe Sea-Jet
-
...

Highly prefabricated, elegant model yacht It doesn´t matter whether you are a beginner or a more advanced modeller, the Sirius RS 32 is the yacht for the model skipper of the future Her high level of pre-fabrication with her regatta-typical features, she is a favourite when it comes to choosing a new yacht.. When developing the Sirius RS32 the robbe team concentrated upon excellent sailing characteristics in light to medium winds with a fast & easy final assembly, all combined with a realistic scale-like appearance. The Sirius is pre-built to the greatest possible extent. It only remains to fit the mast & sails. Specification: Length: 890 mm
Width: 205 mm
Height: 1640 mm Scale: 1:15 Total displacement: 2320 g Mast

Height: 1250 mm Sail area: 30.00 dm 2 Manufacturer: Robbe Model: SIRIUS RS 32 sailing boat (1-1052)



...

Radio-controlled model sailing yacht to 1:10 scale The Smaragd (Emerald) is a large model which can be sailed even in quite strong winds, & in its basic version can be controlled with a simple two-channel radio control system. The carefully optimised arrangement of the sail area allows the boat to achieve the maximum speed possible from the hull design even in moderate winds & on all headings. If you enjoy making use of exotic auxiliary functions, you may fit an optional Genoa or Blister sail in place of the standard jib. The setting of the Genoa (enlarged foresail) is adjusted by means of an additional sailwinch, & it provides advantages above all in light to moderate winds on all tacks. The blister is a foresail with a generous belly, sewn in bands, whose spherical shape develops considerable thrust in light to moderate winds. In contrast to a spinnaker, which normally has to be lowered when the boat is luffing, the blister can be left deployed, as it can be used in a similar fashion to the Genoa when its luff is close-hauled via transmitter control. Optional Standard Sail area: approx. 80 dm 2 Sail area with Genoa: approx. 94 dm 2 Sail area with Blister: approx. 94 dm 2 Specification: Length: 1380 mm
Width: 360 mm
Height: 2200 mm Scale: 1:10 Total displacement: 12000 g Ballast weight: 8000 g Mast

Height: 1800 mm Draught: 300.00 mm Manufacturer: Robbe Model: Robbe Smaragd (1-1076)



...

Radio-controlled scale sounding boat to 1:25 scale, matching the Norderney survey ship The Möwe is the ideal complement to the Norderney survey ship, as it can be carried on board the mother ship, but also run independently. However, equipped with a simple 2-channel system it can also be operated as a st&-alone model. The boat can even be run without radio control. Specification: Length: 260 mm
Width: 105 mm Scale: 1:25 Total displacement: 300 g Manufacturer: Robbe Model: Robe Sounding Boat Moewe (1-1037)
...

Scale model of the marine emergency cruiser " Berlin" to 1:25 scale The SK " Berlin" is one of the most modern of the rescue ships operated by the German Association for the Rescue of the Shipwrecked (DGz RS). The boat was christened on the occasion of the Association’s 120 year anniversary in May 1985, & was commissioned at its base of Kiel/ Laboe. The boat was constructed at the Luerssen shipyard in Bremen using a special interlocking bulkhead system, & is built of seawater-resistant aluminium. The Berlin’s three engines with their total power of about 3200 BHP give her an impressive top speed of 24 knots. The SK’s hull is designed to allow her to operate & manoeuvre accurately at very high speeds in extremely heavy seas. Powerful fire monitors with a pumping capacity of 200 m 3 provide a highly effective fire fighting capability in case of emergency. The ship is equipped with a powerful bow thruster for extreme manoeuvrability, & it is also fitted with the very latest technical & communications equipment for use at sea. The Berlin also carries advanced medical equipment & facilities to provide first aid to injured mariners. In shallow waters the vessel’s versatility is increased by the daughter boat Steppke, which is carried on board. This little boat is extremely adaptable, & has been specially developed & equipped for work in shallow water conditions. Purpose of the DGz RSThe German Association for the Rescue of the Shipwrecked (DGz RS) is an independent body which carries out maritime search & rescue services under its own authority, & it has its own fleet of emergency sea cruisers & lifeboats. The lifeboatmen of the DGz RS are ready for work at any time & in any weather. Hardly a day goes past when they don’t hear the call "SOS.. . launch the lifeboats!" All search & rescue measures at sea are co-ordinated by the Bremen marine emergency management team. Without exception, the work of the rescue association is financed by donations & contributions from members, & no state funding or public backing is provided. The association’s patron is the Federal President of Germany. Crew figures not included. Model characteristics The robbe model of the ocean-going emergency cruiser " Berlin" is a true scale model of the full-size to 1:25 scale both in terms of appearance & technical functions. Like the original vessel the robbe model
Features: Three powerful, separately controlled engines 3-blade rudder system Powerful bow thruster Two fully articulated fire monitors equipped with a powerful pump Working daughter boat " Steppke"; can be operated independently Rise & fall stern flap Cable winch for retrieving the daughter boat Mechanism for engaging & releasing the tow cable Wide-ranging lighting system, e.g. searchlight, navigation lamps, towing light Several special function sets are available, so that the model can be fitted out in easy stages with all the optional fittings & auxiliary working systems. If you install all the optional equipment, you can carry out all manner of interesting operations on the water with your Berlin. Note that a separate RC system is required for the " Steppke". Specification: Length: 1100 mm
Width: 260 mm
Height: 610 mm Scale: 1:25 Total displacement: 7000 g Manufacturer: Robbe Model: Robbe SRK Berlin (1-1150)


...

Model submarine with electric power & dynamic diving system The Sea-Wolf is the longest serving model in our submarine fleet. Introduced many years ago, it began a successful period of submarine modelling for us which has lasted right up to the present day. In 1998 it was followed by the legendary Type VII boat, the U-47, & finally by our largest model, the Type XXI boat, the U-2540. The Sea-Wolf is the ideal submarine for all modellers, from the ambitious beginner through the modeller interested in a change of direction to the expert & connoisseur. After all, it offers an attractive combination of impressive appearance, reasonable building time & a fair system price. We have now revised this model in a number of significant details, to make it an even more interesting proposition. New features of the robbe Seal Wolf V2: Central pressure vessel screw connection, externally accessible (no hull section removal required) Kit

Includes:: electric motor, suppressors & cables Kit

Includes:: Lead ballast Revised decal sheet with more comprehensive details For additional information relating to the dynamic diving method, other models in the robbe submarine fleet etc., please refer to our current main catalogue. Only rudder & throttle functions are required for normal running & diving, which means that a two-channel system is sufficient. If a third channel is available, the hydroplanes can be controlled to over-ride the automatic depth system. This arrangement permits high-speed surface running & fast dives. Specification: Length: 900 mm
Width: 100 mm
Height: 320 mm Total displacement: 4100 g Manufacturer: Robbe Model: Robbe Submarine Seawolf V2 (1-1014)





...

Scale model of a German U-boat to 1:40 scale, with dynamic diving systemfittings & electric motors included During the development stage of our model of the U 47 we concentrated especially on maximum possible scale fidelity, & accurate reproduction of the detail features of the vessel. In spite of its impressive length of more than 1.7 m, the boat is highly manoeuvrable & has a good turn of speed. It features the dynamic method of submerging, & all these features make for a highly realistic model when in & under the water. An important feature of this imposing boat is the flooding slots in the outer skin, & these are factory-cut in order to shorten the building time. This eliminates the time-consuming work of drilling or machining these openings. Specification: Length: 1700 mm
Width: 160 mm Scale: 1:40 Total displacement: 8500 g Manufacturer: Robbe Model: Robbe Submarine U 47 (1-1114)
...

Scale model of the type XXI submarine to 1:40 scale for dynamic diving The U-boat U2540 was built at the Blohm und Voss yard in Hamburg in 1944, & the vessel was commissioned in January 1945. During the crew training phase in early May 1945 the boat was attacked by a British bomber off Fehmarn, & was eventually scuttled by the crew. By this point in history this was a typical fate of the last U-boats commissioned by the German War Navy. Many years later the infant Federal Republic of Germany had become a member of NATO, & was looking for a suitable vessel on which to base the submarines of the Federal Navy; this was when the fate of the U2540 was recalled: the boat which had lain on the bottom of the sea for 12 years. In 1957 she was raised, brought to Kiel & completely re-built. On 01.09.1960 the submarine was re-christened ´ Wilhelm Bauer´, & was commissioned into the German Federal Navy. By Spring 1980 the submarine had completed a long period of service as a training & experimental vessel, & was finally retired. Since 1984 the ´ Wilhelm Bauer´ has been an exhibit in the German Maritime Museum in Bremerhaven. The unusual history of U2540 illustrates just how advanced was the design of this U-boat type. Seldom have we received so many requests for a particular model from our dealers & model builders. The repeated appeal was for another submarine to the same scale as the U47. The robbe development team responded, & we can now offer our latest model U-boat: The Type XXI boat U2540 Just like the legendary robbe U47, this model is capable of submerged running using the dynamic method of diving. The model is almost 2 metres long, & consists
- like the U47
- of a foreship & aftership joined together by a central screwed joint. When the two parts are separated, the motors & RC equipment assembly can be withdrawn from the pressure vessel. This model also features pre-cut flooding slots to save the modeller the time-consuming task of drilling and/or machining the openings. In contrast to the U47 the forward hydroplanes are controlled by a servo, rather than mechanically by means of a paddle. As an option these forward hydroplanes can be folded in for surface running, just as on the full-size vessel. This is an imposing model which always attracts a large number of fascinated spectators.RC functions: Rudder, Forward hydroplanes, Aft hydroplanes, Motor control, Folding forward hydroplanes Specification: Length: 1915 mm
Width: 210 mm
Height: 330 mm Total displacement: 12000 g Manufacturer: Robbe Model: Robbe Submarine U2540 Typ Xxi (1-1214)



...

1: 40 scale dynamic-diving model of the German Federal Navy’s 212-class submarine When we decided it was time to produce a new model submarine, our development team selected the new, ultra-modern 212- class of the German Federal Navy as their prototype. The full-size boat: These subs were developed at the Howaldtswerke-Deutsche Werft Gmb H (HDW) dockyard in Kiel. It is the world’s first submarine type to be equipped with a hybrid fuel cell power system. Basically the boat is propelled by an electric motor. For surface running the motor is powered by a diesel generator, but when the boat is submerged, electrical current is supplied by a hydrogen fuel cell system. U 31 was the first 212 A class to be built, & the vessel was launched in March 2002; this is the basis for our model. The model: Our model of the U 31 has been developed & built using proven methods of construction & pre-fabrication, i.e. the same methods used on the U 2540. However, the diameter of the pressure vessel has been increased by 3.5cm in order to give the large hull the stiffness required. The pressure vessel is fitted with an internal multi-part CNC-machined installation frame, which houses all the essential RC & electrical system components. Just like the full-size sub, our model of the U31 features an ultra-modern power system: in this case a slow-rewing, high-torque brushless electric motor provides enormous thrust. With the kind approval & support of the Howaldtswerke-Deutsche Werft Gmb H (HDW) of Kiel. Specification: Length: 1430 mm
Width: 180 mm
Height: 470 mm Scale: 1:40 Total displacement: 19000 g Manufacturer: Robbe Model: Submarine U31 Class 212 (1-1215)

...

Scale model of a sailing schooner to 1:20 scale In the mid-1860Õs a Swedish distilling company placed a contract with the Stockholm dockyard of Soedra Varvet for the construction of a fast, elegant sailing schooner. In 1868 the ?9 m long Vanadis was launched, rigged as a Newfoundland schooner. During her colourful career the vesselÕs high speed was in dem&, & at times she operated as a smuggling boat & as a customs vessel. In the period 1978 to 1981 she underwent complete restoration in Hamburg, & since then she has sailed under the name Valdivia von Altona. She now serves as a charter vessel for extended sailing cruises, & has taken part with great success in international regattas. Building & operating this large model present many hours of undiluted pleasure to the experienced marine modeller who enjoys working with wood & other materials. If you are one of them, our model of the Valdivia will take you back effortlessly to the atmospheric heyday of these marvellous sailing yachts. Specification: Length: 1580 mm
Width: 300 mm
Height: 1300 mm Scale: 1:20 Total displacement: 9000 g Manufacturer: Robbe Model: Robbe Valdivia (1-1140)

...