Radio-controlled model of a working ship with salvage crane to 1:25 scale Fittings set & motor included In many harbours of the world you will find examples of the full-size Paula III. These industrious vessels are constantly shunting in & out of port to carry out their work in the coastal regions, around the estuaries of large rivers & in the harbour approaches. Manoeuvrable & very fast for their size, these working ships are employed for all manner of tasks. Amongst their duties are retrieving & laying sea warnings & markers, clearing away minor obstacles in shipping lanes & transporting special equipment required for marine research. This wide-ranging versatility gives the imaginative modeller almost unlimited scope for completing & operating the boat. The Paula III is the ideal model for the beginner & advanced model builder alike, but is likely to appeal to the traditional modeller who enjoys "real" construction work. We recommend the use of a lead-acid battery which gives extremely long running times. The salvage crane can lower various loads over the model´s stern & retrieve them again. Crew figures & buoy set not included in the kit. Specification: Length: 710 mm
Width: 215 mm Scale: 1:25 Total displacement: 2500 g Manufacturer: Robbe Model: Robbe Paula III (1-1159)
...

Semi-scale model of a pilot boat to 1: 25 scale No container ship or oil tanker would ever make it into port undamaged, or pass through the narrow shipping lanes, if they were not guided by an experienced pilot. Pilots have to be able to reach the ship concerned without delay, so they travel aboard fast, manoeuvrable pilot boats, which are capable of running alongside the large vessels even in the roughest of seas. If you understand the fascination of these boats, then the Maris II is just the right model for you, as it is an unusual vessel which is not to be found at every boating lake. A simple but highly effective power system, fine detailing & an interesting colour scheme make our pilot boat an affordable beginner´s or second model. Specification: Length: 610 mm
Width: 185 mm
Height: 360 mm Total displacement: 1800 g Manufacturer: Robbe Model: Robbe Pilot Cutter Boat Maris II (1-1063)

...

Semi-scale model of a police boat to 1: 50 scale Police boats fulfil a large number of protective & guard duties in German waters. The broad range of operations calls for high-speed boats fitted with sophisticated technical equipment. At the development stage of our police boat we paid particular attention to affordable, high-quality power system components, a scale designed for ease of transport, & classic model boat building techniques. The reasonable system price & the potential expansion make the W4 attractive to beginner & advanced modeller alike, forming a boat which stands out from the mass of uniform models usually seen at the lake side. Specification: Length: 610 mm
Width: 170 mm
Height: 360 mm Total displacement: 1700 g Manufacturer: Robbe Model: Robbe Police Boat W4 (1-1050)

...

High Class Ready-To-Run speed boat with brushless engine & Futaba 2.4 GHz remote control technology. There are many ready-to-run racing boats. The robbe Rapido is unique. The development & production of the model are Made in Germany, the remote control system is from FUTUBA & the model is driven by a state-of-the-art brushless motor. A truly High Class model for racers looking for something special. Specification: Length: 490 mm
Width: 230 mm
Height: 130 mm Total displacement: 1000 g Manufacturer: Robbe Model: Robbe Rapido BL-powered 2, 4 GHz RTR (1-1192)

...

Radio-controlled model sailing yacht With her streamlined hull & integral keel fin the elegant Comtesse is capable of an impressive turn of speed even in just a light breeze. However, the boat can still be sailed safely in stronger winds, as the deep keel makes it impossible to capsize. The boat handes nicely balanced, making it easy for the newcomer to model sailing to trim it accurately. As you would expect, the Comtesse can cope with all headings from tacking into wind right round to sailing before the wind, which means that it is possible to sail the boat to any pre-determined point & then back again. The model is controlled by rudder & simultaneous adjustment of the mainsail & jib settings, i.e. all sailing manoeuvres can be carried out using a simple two-channel radio control system. The kit

Includes:: a moulded Plura hull, & all the other parts are pre-fabricated to ensure a short building time. Specification: Length: 950 mm
Width: 230 mm
Height: 1500 mm Total displacement: 3200 g Ballast weight: 1800 g Mast

Height: 1200 mm Sail area: 30.00 dm 2 Draught: 210.00 mm Manufacturer: Robbe Model: Robbe Sailing-Boat Comtesse (1-1072)





...

Radio-controlled motor yacht to 1:20 scale The robbe San Remo is our model of an American luxury cabin cruiser. With its elegant ...

Almost ready to sail model yacht " Made in Germany" You would like a sporty & fast model boat, where quality & service count, & where one can easily obtain spares parts – then decide on " Made in Germany". Development & Manufacture of Sea Diamond takes place at robbe Modellsport in Germany. All parts originate from Robbe. & to be able to get started quickly in the new Hobby, we have taken care of all the hard work for you. Hull & deck are bonded in the factory, steering, drive unit with 600 size power-motor & mountings for the radio gear are fully installed. The new Sea-Diamond caption only has install his choice of radio & affix the decals – & off you go. Specification: Length: 645 mm
Width: 220 mm
Height: 190 mm Total displacement: 1400 g Manufacturer: Robbe Model: Robbe Sea Diamond (1-1127)

...

Racy water sportsman with brushless electric drive After many successful years, the time is ripe for a successor to the robbe Sea-Jet
-
...

Highly prefabricated, elegant model yacht It doesn´t matter whether you are a beginner or a more advanced modeller, the Sirius RS 32 is the yacht for the model skipper of the future Her high level of pre-fabrication with her regatta-typical features, she is a favourite when it comes to choosing a new yacht.. When developing the Sirius RS32 the robbe team concentrated upon excellent sailing characteristics in light to medium winds with a fast & easy final assembly, all combined with a realistic scale-like appearance. The Sirius is pre-built to the greatest possible extent. It only remains to fit the mast & sails. Specification: Length: 890 mm
Width: 205 mm
Height: 1640 mm Scale: 1:15 Total displacement: 2320 g Mast

Height: 1250 mm Sail area: 30.00 dm 2 Manufacturer: Robbe Model: SIRIUS RS 32 sailing boat (1-1052)



...

Radio-controlled model sailing yacht to 1:10 scale The Smaragd (Emerald) is a large model which can be sailed even in quite strong winds, & in its basic version can be controlled with a simple two-channel radio control system. The carefully optimised arrangement of the sail area allows the boat to achieve the maximum speed possible from the hull design even in moderate winds & on all headings. If you enjoy making use of exotic auxiliary functions, you may fit an optional Genoa or Blister sail in place of the standard jib. The setting of the Genoa (enlarged foresail) is adjusted by means of an additional sailwinch, & it provides advantages above all in light to moderate winds on all tacks. The blister is a foresail with a generous belly, sewn in bands, whose spherical shape develops considerable thrust in light to moderate winds. In contrast to a spinnaker, which normally has to be lowered when the boat is luffing, the blister can be left deployed, as it can be used in a similar fashion to the Genoa when its luff is close-hauled via transmitter control. Optional Standard Sail area: approx. 80 dm 2 Sail area with Genoa: approx. 94 dm 2 Sail area with Blister: approx. 94 dm 2 Specification: Length: 1380 mm
Width: 360 mm
Height: 2200 mm Scale: 1:10 Total displacement: 12000 g Ballast weight: 8000 g Mast

Height: 1800 mm Draught: 300.00 mm Manufacturer: Robbe Model: Robbe Smaragd (1-1076)



...