More From Contributor

£221.99
Fast ready-to-run motor yacht with 2.4 GHz remote control The large Pacific Queen with its powerful motor is the ideal motor yacht for all model skippers who don´t want to spend a lot of time buidling, but want to set sail on their first trip straight away. This completely pre-assembledmodel is ready to run after loading the battery. The Pacific Queen set

Includes::
a modern 2.4 GHz remote control unit & full motorisation including a high-quality robbe speed controller. Its excellent sailing properties & its smart design make this the complete ready-to-run package. Specification: Length: 850 mm
Width: 245 mm
Height: 265 mm Total displacement: 1600 g Manufacturer: Robbe Model: Robbe Pacific Queen 2, 4 GHz RTR (1-1136)



...
Archived Product
£104.99
Radio-controlled model of a working ship with salvage crane to 1:25 scale Fittings set & motor included In many harbours of the world you will find examples of the full-size Paula III. These industrious vessels are constantly shunting in & out of port to carry out their work in the coastal regions, around the estuaries of large rivers & in the harbour approaches. Manoeuvrable & very fast for their size, these working ships are employed for all manner of tasks. Amongst their duties are retrieving & laying sea warnings & markers, clearing away minor obstacles in shipping lanes & transporting special equipment required for marine research. This wide-ranging versatility gives the imaginative modeller almost unlimited scope for completing & operating the boat. The Paula III is the ideal model for the beginner & advanced model builder alike, but is likely to appeal to the traditional modeller who enjoys "real" construction work. We recommend the use of a lead-acid battery which gives extremely long running times. The salvage crane can lower various loads over the model´s stern & retrieve them again. Crew figures & buoy set not included in the kit. Specification: Length: 710 mm
Width: 215 mm Scale: 1:25 Total displacement: 2500 g Manufacturer: Robbe Model: Robbe Paula III (1-1159)
...
Archived Product
£104.99
Semi-scale model of a pilot boat to 1: 25 scale No container ship or oil tanker would ever make it into port undamaged, or pass through the narrow shipping lanes, if they were not guided by an experienced pilot. Pilots have to be able to reach the ship concerned without delay, so they travel aboard fast, manoeuvrable pilot boats, which are capable of running alongside the large vessels even in the roughest of seas. If you understand the fascination of these boats, then the Maris II is just the right model for you, as it is an unusual vessel which is not to be found at every boating lake. A simple but highly effective power system, fine detailing & an interesting colour scheme make our pilot boat an affordable beginner´s or second model. Specification: Length: 610 mm
Width: 185 mm
Height: 360 mm Total displacement: 1800 g Manufacturer: Robbe Model: Robbe Pilot Cutter Boat Maris II (1-1063)

...
Archived Product
£113.99
Semi-scale model of a police boat to 1: 50 scale Police boats fulfil a large number of protective & guard duties in German waters. The broad range of operations calls for high-speed boats fitted with sophisticated technical equipment. At the development stage of our police boat we paid particular attention to affordable, high-quality power system components, a scale designed for ease of transport, & classic model boat building techniques. The reasonable system price & the potential expansion make the W4 attractive to beginner & advanced modeller alike, forming a boat which stands out from the mass of uniform models usually seen at the lake side. Specification: Length: 610 mm
Width: 170 mm
Height: 360 mm Total displacement: 1700 g Manufacturer: Robbe Model: Robbe Police Boat W4 (1-1050)

...
Archived Product
£276.99
High Class Ready-To-Run speed boat with brushless engine & Futaba 2.4 GHz remote control technology. There are many ready-to-run racing boats. The robbe Rapido is unique. The development & production of the model are Made in Germany, the remote control system is from FUTUBA & the model is driven by a state-of-the-art brushless motor. A truly High Class model for racers looking for something special. Specification: Length: 490 mm
Width: 230 mm
Height: 130 mm Total displacement: 1000 g Manufacturer: Robbe Model: Robbe Rapido BL-powered 2, 4 GHz RTR (1-1192)

...
Archived Product
£187.99
Radio-controlled semi-scale model of a mega-yacht to 1:25 scale The long, slim hull of the San Diego looks simply fantastic on the water. Fitted out with two powerful 700-size electric motors, with direct drive to a pair of contra-rotating surface-piercing propellers, the San Diego accelerates strongly & soon comes up onto the step & planes across the water. A pair of swivelling Navy Speed power systems provide excellent straight running characteristics combined with good manoeuvrability even in choppy water. The optional fittings set contains all you need to fit out your model with all the luxurious equipment featured by the full-size boat. Crew figures not included in the kit. Specification: Length: 1270 mm
Width: 250 mm Scale: 1:25 Total displacement: 5000 g Manufacturer: Robbe Model: San Diego (1-1045)
...
Archived Product
£66.99
Radio-controlled motor yacht to 1:20 scale The robbe San Remo is our model of an American luxury cabin cruiser. With its elegant ...
Archived Product
£364.99
Almost ready to sail model yacht " Made in Germany" You would like a sporty & fast model boat, where quality & service count, & where one can easily obtain spares parts – then decide on " Made in Germany". Development & Manufacture of Sea Diamond takes place at robbe Modellsport in Germany. All parts originate from Robbe. & to be able to get started quickly in the new Hobby, we have taken care of all the hard work for you. Hull & deck are bonded in the factory, steering, drive unit with 600 size power-motor & mountings for the radio gear are fully installed. The new Sea-Diamond caption only has install his choice of radio & affix the decals – & off you go. Specification: Length: 645 mm
Width: 220 mm
Height: 190 mm Total displacement: 1400 g Manufacturer: Robbe Model: Robbe Sea Diamond (1-1127)

...
Archived Product
£199.99
Racy water sportsman with brushless electric drive After many successful years, the time is ripe for a successor to the robbe Sea-Jet
-
...
Archived Product
£194.99
Highly prefabricated, elegant model yacht It doesn´t matter whether you are a beginner or a more advanced modeller, the Sirius RS 32 is the yacht for the model skipper of the future Her high level of pre-fabrication with her regatta-typical features, she is a favourite when it comes to choosing a new yacht.. When developing the Sirius RS32 the robbe team concentrated upon excellent sailing characteristics in light to medium winds with a fast & easy final assembly, all combined with a realistic scale-like appearance. The Sirius is pre-built to the greatest possible extent. It only remains to fit the mast & sails. Specification: Length: 890 mm
Width: 205 mm
Height: 1640 mm Scale: 1:15 Total displacement: 2320 g Mast

Height:
1250 mm Sail area: 30.00 dm 2 Manufacturer: Robbe Model: SIRIUS RS 32 sailing boat (1-1052)



...
Archived Product

Robbe Sailing-Boat Comtesse (1-1072)

Radio-controlled model sailing yachtWith her streamlined hull and integral keel fin the elegant Comtesse is capable of an impressive turn of speed even in just a light breeze. However, the boat can still be sailed safely in stronger winds, as the deep keel makes it impossible to capsize. The boat handes nicely balanced, making it easy for the newcomer to model sailing to trim it accurately. As you would expect, the Comtesse can cope with all headings from tacking into wind right round to sailing before the wind, which means that it is possible to sail the boat to any pre-determined point and then back again. The model is controlled by rudder and simultaneous adjustment of the mainsail and jib settings, i.e. all sailing manoeuvres can be carried out using a simple two-channel radio
control system. The kit includes a moulded Plura hull, and all the other parts are pre-fabricated to ensure a short building time.Specification:Length: 950 mmWidth: 230 mmHeight: 1500 mmTotal displacement: 3200 gBallast weight: 1800 gMast height: 1200 mmSail area: 30.00 dm2Draught: 210.00 mmManufacturer: RobbeModel: Robbe Sailing-Boat Comtesse (1-1072)
RIP - This product is no longer available on our network. It was last seen on 10.03.2012

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£149.99

Product Description

Radio-controlled model sailing yacht With her streamlined hull & integral keel fin the elegant Comtesse is capable of an impressive turn of speed even in just a light breeze. However, the boat can still be sailed safely in stronger winds, as the deep keel makes it impossible to capsize. The boat handes nicely balanced, making it easy for the newcomer to model sailing to trim it accurately. As you would expect, the Comtesse can cope with all headings from tacking into wind right round to sailing before the wind, which means that it is possible to sail the boat to any pre-determined point & then back again. The model is controlled by rudder & simultaneous adjustment of the mainsail & jib settings, i.e. all sailing manoeuvres can be carried out using a simple two-channel radio control system. The kit

Includes::
a moulded Plura hull, & all the other parts are pre-fabricated to ensure a short building time. Specification: Length: 950 mm
Width: 230 mm
Height: 1500 mm Total displacement: 3200 g Ballast weight: 1800 g Mast

Height:
1200 mm Sail area: 30.00 dm 2 Draught: 210.00 mm Manufacturer: Robbe Model: Robbe Sailing-Boat Comtesse (1-1072)

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Radio - A device used for listening to audio transmissions
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
speed - A measurement of how fast an object travels between two points
Moulded - The shape of a product coming from a factory "mould".
Specification - A description of a product with the details of its attributes.
Simple - Basic, easy no difficulty in understanding.
Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.

Supplier Information

My Hobby Store
MyHobbyStore publishes some of the most well known specialist hobby magasines in the UK and are responsible for some of the most loved events on model hobbies and woodworking. MyHobbyStore are passionate about specialist hobby needs which is why they supply a wide range of hobby supplies at the best prices.

A huge range including:
Model Boat Kits
Model Aircraft kits
Model Cars
Engineering Kits.

The range of kits they supply is very diverse including static models, petrol powered, electric and steam.

Delivery is around 7 days.
Page Updated: 2012-02-04 02:03:29

Community Generated Product Tags

Comtesse robbe (2 people tagged the product this way)
Robbe comtesse model yacht kit (1 person tagged the product this way)
1072 comtesse sailing boat (1 person tagged the product this way)
Robbe comtesse 1072 (1 person tagged the product this way)
Menu