Radio-controlled model of an off-shore racing boat to 1:25 scale It streaks by like an arrow
- there’s just no other word for the
...

Competition version of this fast Off-shore racing boat The Magin One has been a racing boat in the robbe model boat product range for over eight years. This model has been very successful in Mono-racing boat competitions for several seasons, particularly in the S 14/S 12/MS 2 basic class, During this year some modifications to the original model were developed & tested. The result of this reworking is the Magin One Black Race Edition. In order to increase the top speed to around 70 kph we modified the base of the hull, the drive train & the rudder system, as well as the steering fin. Unlike the "old" Magin the Race Edition has its entire drive train without the E-motor in the set contents. So the future pilot of the Magin One Black has three engine options, all based on the recommended lithium polymer battery with 4S with minimum 4400m Ah:
- Standard 700 size brush motor, which can run the Magin One Black at around 60kph in racing boat class S14/S12/MS2basic- brushless Roxxy 3656/06, to reach almost 70km/h with extended running time. This configuration was also entered in competition class Mono 2 in 2009- brushless Roxxy 3650/06 for total speed freaks, to go faster than 70kph & to test the limits of this modified model Specification: Length: 820 mm
Width: 200 mm
Height: 185 mm Total displacement: 2000 g Manufacturer: Robbe Model: Robbe Magin One Black
- Race Edition (1-1191)



...

Semi-scale model of a high-performance racing yacht to 1: 10 scale The outstanding features of these high-performance racing yachts are their elegant design, luxurious fittings &
- especially
- their tremendously powerful engines. To ensure that our model of the Magin Two should be as impressive in every respect as the full-size vessel, we placed special emphasis on re-creating its elegant lines. The requirement for high performance is fulfilled & even exceeded with the optional power set, containing two powerful, high-performance brushless motors: in test-runs we have recorded speeds of more than 60 km / hr. The enormous performance & highly efficient double aluminium rudder system require an operator with steely nerves. Specification: Length: 1030 mm
Width: 240 mm
Height: 210 mm Total displacement: 3400 g Manufacturer: Robbe Model: Robbe Magin Two.1 (1-1123)



...

Semi-scale model of a luxury motor yacht to 1:15 scale Fittings set & power set included Just like the full-size prototype ...

Radio controlled semi-scale model of a harbour tug to 1:50 scale At the design stage of this model we concentrated on scale fidelity & lovingly reproduced detail features. A working, fixed fire monitor is included, mounted on the lower mast platform. The Neptun’s power system is based on a swivelling Kort nozzle for extreme manoeuvrability, & the vessel makes light work of tricky towing manoeuvres in tight situations. The towing hook can be opened & closed by remote control. Specification: Length: 570 mm
Width: 175 mm Scale: 1:50 Total displacement: 2500 g Manufacturer: Robbe Model: Robbe Neptun (1-1030)
...

Radio-controlled model of a working ship with salvage crane to 1:25 scale Fittings set & motor included In many harbours of the world you will find examples of the full-size Paula III. These industrious vessels are constantly shunting in & out of port to carry out their work in the coastal regions, around the estuaries of large rivers & in the harbour approaches. Manoeuvrable & very fast for their size, these working ships are employed for all manner of tasks. Amongst their duties are retrieving & laying sea warnings & markers, clearing away minor obstacles in shipping lanes & transporting special equipment required for marine research. This wide-ranging versatility gives the imaginative modeller almost unlimited scope for completing & operating the boat. The Paula III is the ideal model for the beginner & advanced model builder alike, but is likely to appeal to the traditional modeller who enjoys "real" construction work. We recommend the use of a lead-acid battery which gives extremely long running times. The salvage crane can lower various loads over the model´s stern & retrieve them again. Crew figures & buoy set not included in the kit. Specification: Length: 710 mm
Width: 215 mm Scale: 1:25 Total displacement: 2500 g Manufacturer: Robbe Model: Robbe Paula III (1-1159)
...

Semi-scale model of a pilot boat to 1: 25 scale No container ship or oil tanker would ever make it into port undamaged, or pass through the narrow shipping lanes, if they were not guided by an experienced pilot. Pilots have to be able to reach the ship concerned without delay, so they travel aboard fast, manoeuvrable pilot boats, which are capable of running alongside the large vessels even in the roughest of seas. If you understand the fascination of these boats, then the Maris II is just the right model for you, as it is an unusual vessel which is not to be found at every boating lake. A simple but highly effective power system, fine detailing & an interesting colour scheme make our pilot boat an affordable beginner´s or second model. Specification: Length: 610 mm
Width: 185 mm
Height: 360 mm Total displacement: 1800 g Manufacturer: Robbe Model: Robbe Pilot Cutter Boat Maris II (1-1063)

...

Semi-scale model of a police boat to 1: 50 scale Police boats fulfil a large number of protective & guard duties in German waters. The broad range of operations calls for high-speed boats fitted with sophisticated technical equipment. At the development stage of our police boat we paid particular attention to affordable, high-quality power system components, a scale designed for ease of transport, & classic model boat building techniques. The reasonable system price & the potential expansion make the W4 attractive to beginner & advanced modeller alike, forming a boat which stands out from the mass of uniform models usually seen at the lake side. Specification: Length: 610 mm
Width: 170 mm
Height: 360 mm Total displacement: 1700 g Manufacturer: Robbe Model: Robbe Police Boat W4 (1-1050)

...

High Class Ready-To-Run speed boat with brushless engine & Futaba 2.4 GHz remote control technology. There are many ready-to-run racing boats. The robbe Rapido is unique. The development & production of the model are Made in Germany, the remote control system is from FUTUBA & the model is driven by a state-of-the-art brushless motor. A truly High Class model for racers looking for something special. Specification: Length: 490 mm
Width: 230 mm
Height: 130 mm Total displacement: 1000 g Manufacturer: Robbe Model: Robbe Rapido BL-powered 2, 4 GHz RTR (1-1192)

...

Radio-controlled model sailing yacht With her streamlined hull & integral keel fin the elegant Comtesse is capable of an impressive turn of speed even in just a light breeze. However, the boat can still be sailed safely in stronger winds, as the deep keel makes it impossible to capsize. The boat handes nicely balanced, making it easy for the newcomer to model sailing to trim it accurately. As you would expect, the Comtesse can cope with all headings from tacking into wind right round to sailing before the wind, which means that it is possible to sail the boat to any pre-determined point & then back again. The model is controlled by rudder & simultaneous adjustment of the mainsail & jib settings, i.e. all sailing manoeuvres can be carried out using a simple two-channel radio control system. The kit

Includes:: a moulded Plura hull, & all the other parts are pre-fabricated to ensure a short building time. Specification: Length: 950 mm
Width: 230 mm
Height: 1500 mm Total displacement: 3200 g Ballast weight: 1800 g Mast

Height: 1200 mm Sail area: 30.00 dm 2 Draught: 210.00 mm Manufacturer: Robbe Model: Robbe Sailing-Boat Comtesse (1-1072)





...