Quite possible the finest top quality, highest performance & most versatile all-mountain snowboard available. The Cobra X is one of the boards in the Never Summer Carobonium Series, as such it features a dual top & bottom Carbon Matrix for incredible power underfoot & a durable, chip resistant Carbpnium topsheet. The Original Rocker Camber Profile & slight set-back of the mounting locations means the Cobra is perfectly proportioned for all conditions. Specification: Profile: Original Rocker Camber Setback: 25mm Flex: Medium Length CM Effective edge MM Waist Width MM Rider Weightkg 161 1260 265 72-95  

Features: Original Rocker Camber Profile provides the best of both profiles in one. The Rocker in the middle provides floatation, mobility & a forgiving feel, with camber extending from the outside of the binding insert areas to the nose & tail for increased edge hold & pop. This defined profile allows easy un-weighting of the contact points for effortless turns but the power & liveliness of camber when the edge is engaged. The durable, scratch & chip resistant Carbonium Topsheet gives the board a premium look to match its build quality. Not only will it look better for longer but it offers more grip than a regular gloss top sheet due to its texture, so it acts as a built in stomp pad too. Strategically placed Carbonium Laminate Technology in the top & base of board drastically increases power & performance. This lightweight design will keep these boards riding for years to come. Alongside their patented R.C. (Rocker & Camber) profiles, Never Summer has developed their Vario Power Grip Sidecut. This specific sidecut geometry combats the lack of stability & edge hold which is often a side effect of older generation rocker profiles. STS Pre-tensioned Fiberglass is a pre-hardened, layered laminate with added elastomer stringers. This advanced fibreglass provides unmatched strength & performance. Bi-Lite Fiberglass has many of the characteristics of STS Fiberglass with an ultra-light glass fibre matrix. Taking the Custom Flightcore & making it even lighter, the NS Superlight Wood Core has been developed especially for the new Carbonium Series. It blends extremely light wood with durable hardwood for unmatched strength to weight ratio. The lightweight RDS 2 Damping System uses three narrow damping layers that provide the perfect combination of vibration absorption & stability. Elastomeric Underfoot Stabilizers are placed directly below the

...

A soft asymmetrical twin freestyle deck designed to dominate park, the ‘ Slinger sets a new standard for twin asymetrical freestyle boards. It features a deeper heelside sidecut, a new Boost Flex Core & Ripsaw profile for MEGA pop & SUPER stability while retaining a forgiving flex. It’s one of the lightest freestyle boards on the market & it comes complete with Never Summer’s legendary stability, snap & durability. Specification: Profile: Ripsaw profile
- Extended Rocker Camber (EXRC) Setback: 0 Flex: Soft Length Effective Edge -MM Waist Width
- MM 151 1150 248 153 1170 250 156 1190 253 NOTE: DIE CUT BASE COLOURS & COMBINATIONS MAY VARY

Features: Extended Transition Rocker Camber Profile provides the best of both rocker & camber in one. Rocker between your feet offers a forgiving feel, increases floatation & mobility while camber outside of the bindings provides explosive pop & superior edge hold. The difference with the Extended Transition version is a longer transition area where the camber blends into the nose & tail. This decreases the amount of pressure in that area allowing for free-flowing edge transfer whilst still providing solid edge hold when the camber is engaged. Carbon V’s are positioned in the nose & tail of the board, they extend out from the inserts to the effective edge & into the tip & tail. This Carbon VXR configuration stiffens the board torsionally in those areas increasing response & maximising pop while remaining softer between the bindings for torsional control. Alongside their patented R.C. (Rocker & Camber) profiles, Never Summer has developed their Vario Power Grip Sidecut. This specific sidecut geometry combats the lack of stability & edge hold which is often a side effect of older generation rocker profiles. The Low Profile Tip/ Tail maximises the amount of base material in contact with the snow. This helps you to ollie & nollie higher & add stability to landings whilst also providing more float when in deep snow. STS Pre-tensioned Fiberglass is a pre-hardened, layered laminate with added e



...

The patented Original Rocker Camber profile is the foundation to making the Infinity such a versatile board. When ridden at slower speeds the rocker section in the middle takes pressure off the tip & tail making for an easy-going catch-free ride. When ridden a little harder & faster the camber sections really take control & provide reliable edge hold & lively pop. As with all Never Summer boards, the build quality is second to none. Specification: Profile: Original Rocker Camber Setback: 0 Flex: Mid-Soft Length CM Effective Edge MM Waist Width MM Rider Weightkg 147 1150 234 41-63 149 1160 236 45-68 151 1180 238 50-73  

Features: Original Rocker Camber Profile provides the best of both profiles in one. The Rocker in the middle provides floatation, mobility & a forgiving feel, with camber extending from the outside of the binding insert areas to the nose & tail for increased edge hold & pop. This defined profile allows easy un-weighting of the contact points for effortless turns but the power & liveliness of camber when the edge is engaged. Alongside their patented R.C. (Rocker & Camber) profiles, Never Summer has developed their Vario Power Grip Sidecut. This specific sidecut geometry combats the lack of stability & edge hold which is often a side effect of older generation rocker profiles. Bi-Lite Fiberglass has many of the characteristics of STS Fiberglass with an ultra-light glass fibre matrix. Carbon V’s are positioned in the nose & tail of the board, they extend out from the inserts to the effective edge & into the tip & tail. This Carbon VXR configuration stiffens the board torsionally in those areas increasing response & maximising pop while remaining softer between the bindings for torsional control.

...

The Extended Transition Rocker Camber Profile was developed specifically for the Proto. The result is enhanced float & glide with effortless edge-to-edge transitions. The Blunted True-Twin Shape & new Low Profile Tip & Tail improve the freestyle capabilities of this board by increasing the effective edge & maximising base contact right to the tip & tail. The Proto HD & HDX are true all-terrain boards that span park, pipe, Jib & freeride. Note: the Proto HDX is a wider version of the standard Proto HD. Specification: Profile: Extended Transition Rocker Camber Setback: 0 Flex: Medium Length CM Effective edge MM Waist Width MM Rider Weight KG  154 1220 251 54-77 157 1250 253 56-79 160 1290 255 65-88 NOTE: DIE CUT BASE COLOUR COMBINATIONS MAY VARY

Features: Like the Original RC Profile (featured on the Cobra) the Extended Transition Rocker Camber Profile provides the best of both rocker & camber in one. Rocker between your feet offers a forgiving feel, increases floatation & mobility while camber outside of the bindings provides explosive pop & superior edge hold. The difference with the Extended Transition version is a longer transition area where the camber blends into the nose & tail. This decreases the amount of pressure in that area allowing for free-flowing edge transfer whilst still providing solid edge hold when the camber is engaged. The durable, scratch & chip resistant Carbonium Topsheet gives the board a premium look to match its build quality. Not only will it look better for longer but it offers more grip than a regular gloss top sheet due to its texture, so it acts as a built in stomp pad too. Strategically placed Carbonium Laminate Technology in the top & base of board drastically increases power and

...

New for 2013/14 is the Extended Transition Rocker Camber Profile which has been developed specifically for the Proto. The result is enhanced float & glide with effortless edge-to-edge transitions. The Blunted True-Twin Shape & new Low Profile Tip & Tail improve the freestyle capabilities of this board by increasing the effective edge & maximising base contact right to the tip & tail. The Proto HD & HDX are true all terrain boards that span park & pipe, Jib, freeride & big mountain.  Note: the HDX is a wider version on the HD. Specification: Profile:  Extended Transition Rocker Camber Running length: 125 Waist
Width: 26.4 Sidecut radius:  Vario 735 – Multiple radius average Setback:  Centred Flex (1 soft, 10 stiff): 5 (Specification based on the 158cm board) Note: Base graphic colours may vary

Features: Like the Original RC Profile (featured on the SL) the  Extended Transition Rocker Camber Profile provides the best of both profiles in one. The difference with the Extended Transition version is a longer transition area at the end of the effective edge to the nose & tail. This decreases the amount of pressure in that area allowing for free-flowing edge transfer whilst still providing solid edge hold when the camber is engaged. The durable, scratch & chip resistant  Carbonium Topsheet gives the board a premium look to match its build quality. Not only will it look better for longer but it is grippier than a gloss topsheet due to its texture, so it acts as a built in topsheet too. Strategically placed  Carbonium Laminate Technology in the top & base of board drastically increases power & performance. This lightweight design will keep these boards riding for years to come. Alongside their patented R.C. (Rocker & Camber) profiles, Never Summer has developed their  Vario Power Grip Sidecut. This specific sidecut geometry combats the lack of stability & edge hold which is often a side effect of more traditional rocker profiles. The  Low Profile Tip/ Tail Damper maximises the amount of base material in contact with the snow. This helps you to ollie & nollie higher & add stability to landings whilst also providing more float when in deep snow. STS Pre-tensioned Fibreglass is a pre-hardened, layered laminate with added elastomer stringers. This advanced fibreglass provides unmatched strength & performance. Bi-Lite Fibreglass has many of the characteristics of STS Fibreglass with an ultra light glass fibre matrix. Taking the Custom Flightcore & making it even lighter, the NS Superlight Wood Core has been developed especially for the new Carbonium Series. Harmonic Tip/ Tail Dampers reduce the amount of vibration at the nose & tail without affecting the liveliness & a pop of the cambered areas Designed specifically for the Carbonium Series, the CDS Dampening System provides unmatched stability & control at high speeds. Thin elastomeric rubber stringers reduce vibration from the edge & stringers below the inserts & Elastomeric Underfoot Stabilizers are placed directly below the mounting area in order to increase vibration absorption & high speed performance while also reducing fatigue. Whereas conventional ABS Sidewalls have a tenden


...

The Ripsaw is the go-to twin board for the aggressive rider who shred everywhere. Featuring the new Camber Rocker (CR) profile from Never Summer with amplified camber areas that are longer & deeper than the traditional Rocker Camber (RC) boards, you get more edge hold & pop than ever before, whilst retaining float & playfulness. Specification: Profile: Extended Rocker Camber (EXRC) Setback: 0 Flex: Stiff Length CM Effective edge MM Waist Width MM Rider Weightkg 156 1170 252 75-93 159 1200 254 82-100  

Features: Like the Original RC Profile (featured on the Cobra) the Extended Transition Rocker Camber Profile provides the best of both rocker & camber in one. Rocker between your feet offers a forgiving feel, increases floatation & mobility while camber outside of the bindings provides explosive pop & superior edge hold. The difference with the Extended Transition version is a longer transition area where the camber blends into the nose & tail. This decreases the amount of pressure in that area allowing for free-flowing edge transfer whilst still providing solid edge hold when the camber is engaged. Alongside their patented R.C. (Rocker & Camber) profiles, Never Summer has developed their Vario Power Grip Sidecut. This specific sidecut geometry combats the lack of stability & edge hold which is often a side effect of older generation rocker profiles. Carbon V’s are positioned in the nose & tail of the board, they extend out from the inserts to the effective edge & into the tip & tail. This Carbon VXR configuration stiffens the board torsionally in those areas increasing response & maximising pop while remaining softer between the bindings for torsional control. The Low Profile Tip/ Tail maximises the amount of base material in contact with the snow. This helps you to ollie & nollie higher & add stability to landings whilst also providing more float when in deep snow. STS Pre-tensioned Fiberglass is a pre-hardened, layered laminate with added elastomer stringers. This advanced fiberglass provides unmatched strength & performance. Bi-Lite Fiberglass is an ultra-light glass reinforced fiber matrix that deli

...

The Ripsaw X is the go-to twin board for the aggressive rider who shred everywhere. Featuring the new Camber Rocker (CR) profile from Never Summer with amplified camber areas that are longer & deeper than the traditional Rocker Camber (RC) boards, you get more edge hold & pop than ever before, whilst retaining float & playfulness. The Ripsaw X has a wider waist width than the Ripsaw in order to accommodate larger boots. Specification: Profile: Extended Rocker Camber (EXRC) Setback: 0 Flex: Stiff Length CM Effective Edge MM Waist Width MM Rider Weightkg 160 1200 264 84-100+  

Features: Like the Original RC Profile (featured on the Cobra) the Extended Transition Rocker Camber Profile provides the best of both rocker & camber in one. Rocker between your feet offers a forgiving feel, increases floatation & mobility while camber outside of the bindings provides explosive pop & superior edge hold. The difference with the Extended Transition version is a longer transition area where the camber blends into the nose & tail. This decreases the amount of pressure in that area allowing for free-flowing edge transfer whilst still providing solid edge hold when the camber is engaged. Alongside their patented R.C. (Rocker & Camber) profiles, Never Summer has developed their Vario Power Grip Sidecut. This specific sidecut geometry combats the lack of stability & edge hold which is often a side effect of older generation rocker profiles. Carbon V’s are positioned in the nose & tail of the board, they extend out from the inserts to the effective edge & into the tip & tail. This Carbon VXR configuration stiffens the board torsionally in those areas increasing response & maximising pop while remaining softer between the bindings for torsional control. The Low Profile Tip/ Tail maximises the amount of base material in contact with the snow. This helps you to ollie & nollie higher & add stability to landings whilst also providing more float when in deep snow. STS Pre-tensioned Fiberglass is a pre-hardened, layered laminate with added elastomer stringers. This advanced fiberglass provides unmatched strength & performance. Bi-Lite Fiberglass is an ultra-light glass reinforced fiber matrix that delivers incredible freestyle & freeride performance without sacrificing durability. The Never Summer exclusive NS Custom Flightcore is the most technically advanced core they have ever used. Designed & built in their own wood core facility it fuses premium hardwood & ultra-light soft wood laminates with vertical layers o

...

Limited early release of the new 2014/15 Never Summer Ripsaw in 156cm, 159cm & Ripsaw X in 157X This new model from Never Summer features the new ‘ Camber Rocker’ profile, which has amplified camber areas that are both longer & deeper than Never Summers traditional Rocker Camber boards. This brings twice the amount of camber while still retaining Rocker Camber playfulness. The true twin Ripsaw provides superior edge hold, amazing playfulness, incredible float & gigantic pop. Specification: Profile: Camber Rocker (camber/rocker/camber) Running length: 1170mm Waist

Width: 252mm Sidecut radius: 7.3m (multiple radius average) Setback: Centred Flex (1 soft, 10 stiff): 7 (Specification based on the 156cm board)

Features: Matte Topsheet Carbon VXR Extended dual carbon V’s help to transfer more energy to the end of the effective edge, tip & tail without making the board too stiff for buttering & presses. Rocker Camber Profile has amplified camber areas that are both longer & deeper than Never Summers traditional Rocker Camber (RC) boards. This brings you twice the amount of camber while still retaining RC playfulness. Vario Power Grip Sidecut. This specific sidecut geometry combats the lack of stability & edge hold which is often a side effect of more traditional rocker profiles. A low profile in the nose & tail maximizes material contact with the snow for more powerful Ollie/ Nollie pop & adds stability to landings. Low Profile Tip/ Tail also reduces the plowing effect in the nose for superior float in soft snow. The worlds best snowboard fiberglass, period. STS Pre-tensioned Fiberglass is a pre-hardened, pre-tensioned, & layered laminate that provides unmatched strength, edge hold & performance. Bi-Lite Fiberglass uses an ultra light glass reinforced fiber matrix, which delivers incredible freestyle & freeride performance without sacrificing durability. Never summer’s exclusive Custom Flightcore is their most advanced core system. Designed & built in house at their woodcore facility, these cores fuse premium hardwood & ultra light softwood with vertical layers of elastomeric vibration dampers. The vibration absorption actually increases the faster you ride & maintainies an incredible amount of snap & liveliness & performance that only a Never Summer board can deliver. The lightweight RDS 2 Dampening System uses three narrow laminated dampening layers that provide the perfect combination of vibration & stability. Directly below the mounting area are Elastomeric Underfoot Stabilizers that provide optimum vibration absorption & increased high-speed stability while reducing foot fatigue. Never Summer were the first snowboard company to use Sintered P-tex Sidewalls because they maintain their integrity at any temperature. An exclusive, super fast, durable sintered base specifically developed for the Cabonium series. Durasurf XT Sintered 5501 base has just the right amount of added graphite to make it the fastest that Never Summer has ever used. P-tex Tip & Tail Protection provides unmatched impact & vibration absorption. Full Wrap Metal Edge
- High quality steel protects the entire perimeter of the board against impact.




...

The SL is the cornerstone of the Never Summer range & its versatility ensures it remains the most popular model. Some updates for 2013/14 include a modified Custom Flight Core which further reduces weight & increases pop & the added VXR Laminate Technology aiding edge response & control. Specification: Profile: Original Rocker Camber Running length: 121 Waist

Width: 251mm Sidecut radius: Vario 750 – Multiple radius average Setback: Slight Flex (1 soft, 10 stiff): 5 (Specification based on the 155cm board) Note: Base graphic colours may vary

Features: Original Rocker Camber Profile provides the best of both profiles in one. The Rocker in the middle provides floatation, mobility & a forgiving feel, with camber extending from the outside of the binding insert areas to the nose & tail for increased edge hold & pop. This defined profile allows easy un-weighting of the contact points for effortless turns but the power & liveliness of camber when the edge is engaged. STS Pre-tensioned Fibreglass is a pre-hardened, layered laminate with added elastomer stringers. This advanced fibreglass provides unmatched strength & performance. Bi-Lite Fibreglass has many of the characteristics of STS Fibreglass with an ultra light glass fibre matrix. Alongside their patented R.C. (Rocker & Camber) profiles, Never Summer has developed their Vario Power Grip Sidecut. This specific sidecut geometry combats the lack of stability & edge hold which is often a side effect of more traditional rocker profiles. Dual carbon V’s have been added to help energy transfer from the effective edge to the tip & tail for the optimum freestyle feel whether in the park or freeriding. Carbon VXR Laminate Technology achieves this increased performance without making the board too stiff for buttering & presses. The Never Summer exclusive NS Custom Flightcore was designed & built in Never Summer’s wood core facility. Combined premium hardwood & ultra light softwood is laminated together with vertical layers of elastomeric vibration dampeners which increase vibration absorption the fast you ride. RDS 2 Dampening System provides the perfect level of vibration absorption & stability. Elastomeric Underfoot Stabilizers are placed directly below the mounting area in order to increase vibration absorption & high speed performance while also reducing fatigue. Produced exclusively for Never Summer, the high density Durasurf Sintered 4501 Base is extremely fast & will provide unmatched performance & durability. True all-round boards are actually pretty few & far between, which is why those of us who like to think we embrace all aspects of snowboarding end up having more than one board. The combination of the mixed profile, flex, shape, dampening & quality means that this board ticks a lot of boxes. As comfortable pressing boxes as it is dropping backcountry cliffs, the SL is an ideal one board quiver for those of us that can’t pick & choose our days on the hill. The price tag attached to Never Summer snowboards is a reflection of their quality. You get what you pay for & with the extra longevity & the true all-mountain performance the Proto provides, it is e



...

The standard Neversummer SL is an outstanding all rounder with the versatility to hit any line you can get to by lift, helicopter or bootpack.  The addition of touring capability opens up the rest of the rideable terrain in the mountains. The SL Split has a slightly stiffer construction than its non split counterpart thanks to a carbonium topsheet.  This combats the inherent softer nature of a split board, & gives a little more control & stability on more advanced terrain. The dampening system, core construction & base materials used on the SL Split are all uprated over the standard SL   Specification: Construction: Splitboard with full Voile splitboard hardware. Neversummer Superlight Woodcore, Carbonium topsheet, Carbonium Laminate, Durasurf XT Sintered 5501 Base, Sintered P-Tex sidewalls (inner & outer edge), CDS Damping System Length:158cm Running Length: 124cm Waist

Width: 25.4 cm Sidecut Radius: 7.43m (average) Setback: Slight! Flex 1-10 (10 is stiffest): 5.5  

Features: R.C. Technology, as found on all Neversummer snowboards for 2013, refers to their patented camber & sidecut profiles. Neversummer snowboards feature rocker between the binding inserts in the centre of the board & traditional camber outboard of the inserts, before reaching the tip & tail. This is married with a triple radius sidecut, featuring a straight section of edge between the inserts, with a shallow radius in the insert area, & a deep radius in the area between the bindings & the tip/tail. These progressive & variable profiles combine to create a freestyle ‘looseness’ to the ride at lower speeds, but as you ramp up your speed & forces, the board grips the ground like you simply wouldn’t believe, while still giving you the feedback & flexibility to pop, spin & butter until the park closes. The Neversummer Superlight Core is designed specifically for the Neversummer models that feature Carbonium topsheets & lamintaes. This allows less force to be taken by the core, enabling a lighter, more focused core design, made from extremey light woods combined with hardwood for incredible strength to weight ratio. The CDS (carbonium damping system) damping on the SL Split hugely reduces vibration, aiding high speed control & stability. The CDS incorporates elastomer stringers
- essentially long thin strips of rubber like material
- along the edges & beneath the binding inserts, generating a smooth ride under foot, while retaining a lively, snappy feel. The SL Split has a topsheet made from Carbonium, a highly durable, scratch resistant, textured material that is not only fantastic for aiding in construction design, but also grips the bottom of your boots, turning the whole board into a stomp pad! The SL Split also features layers of carbon weave as the top & bottom of the laminate layer of the snowboard.  This provides outstandiung strength to weight for the board in general, & also enables fine tuning of flex & pop zones for the board. Durasurf XT Sintered 5501 Base, manufactured exclusively by Crown plastics, is the fastest most durable base ever seen on a Neversummer board, Manufactured & developed with Crown Plastics, industry leaders of sintered manufacturing. Dependability is ki





...