More From Contributor

£121.95
Featuring Double Crossbow sole, the Decade SL assures a stunning grip on ice & slippery surfaces. At the same time Super lace ...
Archived Product
£149.95
This crowning all mountain freestyle orientated boot is ready to blow! A mix of comfort, flex & technology, all packaged in a boot that delivers pure quality. The TF3 liner keeps your foot protected & warm while the amazing 540 Hell Retention System never lets your foot slip inside. This gives you all the foothold & support you need. Innovative technology provided by the Hypershock sole provides strong holding traction & grip on even the most slippery of surfaces.

Specification Tf 3 Liner 540 Heel Retention System Super Lace SL Flex Window Hypershock Outsole Features The Tf 3 Liner is made from Thermo-Fit Foam. This new advanced lining material with target fit zones moulds to the contours of your foot with a heater or over time from natural body heat. It is anatomically designed & reinforced with injected memory foam for better retention & comfort for the feet. Brand new webbing naturally adapts to the instep, thus permitting the closest fit, & distributing power of transmission all over the liner surface.

Includes::
a Velcro power strap for an even better fit. With the 540 Heel Retention System the bootlaces pass through pre-curved lace loops in the ankle area of the boot. This means that when the laces are pulled to close the boot, they are at the same time pulling the webbings where the lace loops are linked. In this way the webbings shrink around the ankle, increasing heel stability. The more the lace is pulled the more power will be transferred in the ankle area, increasing the heel retention performance & foot stability. Super Lace SL is a Speed Lacing System that allows the closure of two different boot areas, the quarter part & the collar part (upper & lower), in order to allow you to select the perfect feeling on each part & improve comfort & foot stability. Your boot will be closed quickly & will stay tight & perform all day. The Flex Window enhances the comfort & mobility of the foot, & it perfectly combines the balance between the power of transmission & a progressive flex. The sides of the collar area slide on the upper transferring the power in a constant way avoiding any possible overlapping between materials, which could lead to a waste of energy & distortion of the boot shape. The Hypershock Outsole guarantees comfort & high performance with maximum weight reduction. Innovative technology designed by HYPERSHOCK means that you can find strong holding traction even on the most slippery ice. The crossbow system helps you absorb the impact when hitting even the biggest booters in or out of the park. Boots can make of break a days snowboarding. Get it right & you’ll have the time of your life, which is why it’s well worth considering the Devine SL from Northwave. There is no compromising on heel-hold, grip, comfort & support & the feedback we’ve had on them shows it’s worth it! Is it for me? The Devine SL are high quality boots for women looking for the highest performance & comfort.



...
Archived Product
£99.95
The Legend is a masterful blend of lightweight design, durability, fit & flex. It’s as tough as nails, fits like a glove & offers a soft & superb flex... definitely a masterpiece to have!!! It comes with the outstanding Hypershock sole that delivers amazing holding traction power, killing grip & sensational impact resistance when hitting the biggest booters. The TF2 liner permits the closest fit & increases power transmission all over the boot. This legendary boot lives on as a staple for riders who shred the entire mountain.

Specification Tf 2 Liner 540 Heel Retention System Super Lace SL Thermal Welding Construction Hypershock Outsole The Tf 2 Liner is made from Thermo-Fit Foam. This new advanced lining material with target fit zones moulds to the contours of your foot with a heater or over time from natural body heat. It is anatomically designed & reinforced with injected memory foam for better retention & comfort for the feet. Brand new webbing naturally adapts to the instep, thus permitting the closest fit, & distributing power of transmission all over the liner surface. With the 540 Heel Retention System the bootlaces pass through pre-curved lace loops in the ankle area of the boot. This means that when the laces are pulled to close the boot, they are at the same time pulling the webbings where the lace loops are linked. In this way the webbings shrink around the ankle, increasing heel stability. The more the lace is pulled the more power will be transferred in the ankle area, increasing the heel retention performance & foot stability. Super Lace SL is a Speed Lacing System that allows the closure of two different boot areas, the quarter part & the collar part (upper & lower), in order to allow you to select the perfect feeling on each part & improve comfort & foot stability. Your boot will be closed quickly & will stay tight & perform all day. Thermal Welding technology brings Northwave distinct advantages in integrating different materials & creating an ‘element beating’ seamless outsole. This is particularly important in the ankle zone where there is no interruption of the upper boot technology bringing progressive support from the heel to the calf. The visible asymmetrical y differentiates the three zones: it provides a stronger support on the outside for increased control when pressing, buttering & spinning; more flexibility laterally on the inner boot. The Hypershock Outsole guarantees comfort & high performance with maximum weight reduction. Innovative technology designed by HYPERSHOCK means that you can find strong holding traction even on the most slippery ice. The crossbow system helps you absorb the impact when hitting even the biggest booters in or out of the park. The Legend is a whole lot of boot for your money. It’s refreshing to see forward thinking technology go into a boot of this price. From the outsole, to the liner, to the lacing system, Northwave consider the rider at every stage of design. You’ll really appreciate it when you get a pair on your feet! Is it for me? The Legend is Ideal for the snowboarder looking for a low cost boot & doesn’t compromise on comfort & durability.

...
Archived Product
£529.95
Quite possible the finest top quality, best performing & most versatile all-mountain snowboard available. The Cobra is one of the boards in the Never Summer Carobonium Series, as such it features a dual top & bottom Carbon Matrix for incredible power underfoot & a durable, chip resistant Carbpnium topsheet. The Original Rocker Camber Profile & slight set-back of the mounting locations means the Cobra is perfectly proportioned for all conditions. Specification: Profile: Original Rocker Camber Setback: 25mm Flex: Medium   Length CM Effective edge MM Waist Width MM Rider Weightkg 158 1230 253 61-84 161 1260 255 66-88  

Features:
Original Rocker Camber Profile provides the best of both profiles in one. The Rocker in the middle provides floatation, mobility & a forgiving feel, with camber extending from the outside of the binding insert areas to the nose & tail for increased edge hold & pop. This defined profile allows easy un-weighting of the contact points for effortless turns but the power & liveliness of camber when the edge is engaged. The durable, scratch & chip resistant Carbonium Topsheet gives the board a premium look to match its build quality. Not only will it look better for longer but it offers more grip than a regular gloss top sheet due to its texture, so it acts as a built in stomp pad too. Strategically placed Carbonium Laminate Technology in the top & base of board drastically increases power & performance. This lightweight design will keep these boards riding for years to come. Alongside their patented R.C. (Rocker & Camber) profiles, Never Summer has developed their Vario Power Grip Sidecut. This specific sidecut geometry combats the lack of stability & edge hold which is often a side effect of older generation rocker profiles. STS Pre-tensioned Fiberglass is a pre-hardened, layered laminate with added elastomer stringers. This advanced fibreglass provides unmatched strength & performance. Bi-Lite Fiberglass has many of the characteristics of STS Fiberglass with an ultra-light glass fibre matrix. Taking t

...
Archived Product
£369.95
Quite possible the finest top quality, highest performance & most versatile all-mountain snowboard available. The Cobra X is one of the boards in the Never Summer Carobonium Series, as such it features a dual top & bottom Carbon Matrix for incredible power underfoot & a durable, chip resistant Carbpnium topsheet. The Original Rocker Camber Profile & slight set-back of the mounting locations means the Cobra is perfectly proportioned for all conditions. Specification: Profile: Original Rocker Camber Setback: 25mm Flex: Medium Length CM Effective edge MM Waist Width MM Rider Weightkg 161 1260 265 72-95  

Features:
Original Rocker Camber Profile provides the best of both profiles in one. The Rocker in the middle provides floatation, mobility & a forgiving feel, with camber extending from the outside of the binding insert areas to the nose & tail for increased edge hold & pop. This defined profile allows easy un-weighting of the contact points for effortless turns but the power & liveliness of camber when the edge is engaged. The durable, scratch & chip resistant Carbonium Topsheet gives the board a premium look to match its build quality. Not only will it look better for longer but it offers more grip than a regular gloss top sheet due to its texture, so it acts as a built in stomp pad too. Strategically placed Carbonium Laminate Technology in the top & base of board drastically increases power & performance. This lightweight design will keep these boards riding for years to come. Alongside their patented R.C. (Rocker & Camber) profiles, Never Summer has developed their Vario Power Grip Sidecut. This specific sidecut geometry combats the lack of stability & edge hold which is often a side effect of older generation rocker profiles. STS Pre-tensioned Fiberglass is a pre-hardened, layered laminate with added elastomer stringers. This advanced fibreglass provides unmatched strength & performance. Bi-Lite Fiberglass has many of the characteristics of STS Fiberglass with an ultra-light glass fibre matrix. Taking the Custom Flightcore & making it even lighter, the NS Superlight Wood Core has been developed especially for the new Carbonium Series. It blends extremely light wood with durable hardwood for unmatched strength to weight ratio. The lightweight RDS 2 Damping System uses three narrow damping layers that provide the perfect combination of vibration absorption & stability. Elastomeric Underfoot Stabilizers are placed directly below the

...
Archived Product
£317.95
The patented Original Rocker Camber profile is the foundation to making the Infinity such a versatile board. When ridden at slower speeds the rocker section in the middle takes pressure off the tip & tail making for an easy-going catch-free ride. When ridden a little harder & faster the camber sections really take control & provide reliable edge hold & lively pop. As with all Never Summer boards, the build quality is second to none. Specification: Profile: Original Rocker Camber Setback: 0 Flex: Mid-Soft Length CM Effective Edge MM Waist Width MM Rider Weightkg 147 1150 234 41-63 149 1160 236 45-68 151 1180 238 50-73  

Features:
Original Rocker Camber Profile provides the best of both profiles in one. The Rocker in the middle provides floatation, mobility & a forgiving feel, with camber extending from the outside of the binding insert areas to the nose & tail for increased edge hold & pop. This defined profile allows easy un-weighting of the contact points for effortless turns but the power & liveliness of camber when the edge is engaged. Alongside their patented R.C. (Rocker & Camber) profiles, Never Summer has developed their Vario Power Grip Sidecut. This specific sidecut geometry combats the lack of stability & edge hold which is often a side effect of older generation rocker profiles. Bi-Lite Fiberglass has many of the characteristics of STS Fiberglass with an ultra-light glass fibre matrix. Carbon V’s are positioned in the nose & tail of the board, they extend out from the inserts to the effective edge & into the tip & tail. This Carbon VXR configuration stiffens the board torsionally in those areas increasing response & maximising pop while remaining softer between the bindings for torsional control.

...
Archived Product
£519.95
The Extended Transition Rocker Camber Profile was developed specifically for the Proto. The result is enhanced float & glide with effortless edge-to-edge transitions. The Blunted True-Twin Shape & new Low Profile Tip & Tail improve the freestyle capabilities of this board by increasing the effective edge & maximising base contact right to the tip & tail. The Proto HD & HDX are true all-terrain boards that span park, pipe, Jib & freeride. Note: the Proto HDX is a wider version of the standard Proto HD. Specification: Profile: Extended Transition Rocker Camber Setback: 0 Flex: Medium Length CM Effective edge MM Waist Width MM Rider Weight KG  154 1220 251 54-77 157 1250 253 56-79 160 1290 255 65-88 NOTE: DIE CUT BASE COLOUR COMBINATIONS MAY VARY

Features:
Like the Original RC Profile (featured on the Cobra) the Extended Transition Rocker Camber Profile provides the best of both rocker & camber in one. Rocker between your feet offers a forgiving feel, increases floatation & mobility while camber outside of the bindings provides explosive pop & superior edge hold. The difference with the Extended Transition version is a longer transition area where the camber blends into the nose & tail. This decreases the amount of pressure in that area allowing for free-flowing edge transfer whilst still providing solid edge hold when the camber is engaged. The durable, scratch & chip resistant Carbonium Topsheet gives the board a premium look to match its build quality. Not only will it look better for longer but it offers more grip than a regular gloss top sheet due to its texture, so it acts as a built in stomp pad too. Strategically placed Carbonium Laminate Technology in the top & base of board drastically increases power and

...
Archived Product
£519.00
New for 2013/14 is the Extended Transition Rocker Camber Profile which has been developed specifically for the Proto. The result is enhanced float & glide with effortless edge-to-edge transitions. The Blunted True-Twin Shape & new Low Profile Tip & Tail improve the freestyle capabilities of this board by increasing the effective edge & maximising base contact right to the tip & tail. The Proto HD & HDX are true all terrain boards that span park & pipe, Jib, freeride & big mountain.  Note: the HDX is a wider version on the HD. Specification: Profile:  Extended Transition Rocker Camber Running length: 125 Waist
Width: 26.4 Sidecut radius:  Vario 735 – Multiple radius average Setback:  Centred Flex (1 soft, 10 stiff): 5 (Specification based on the 158cm board) Note: Base graphic colours may vary

Features:
Like the Original RC Profile (featured on the SL) the  Extended Transition Rocker Camber Profile provides the best of both profiles in one. The difference with the Extended Transition version is a longer transition area at the end of the effective edge to the nose & tail. This decreases the amount of pressure in that area allowing for free-flowing edge transfer whilst still providing solid edge hold when the camber is engaged. The durable, scratch & chip resistant  Carbonium Topsheet gives the board a premium look to match its build quality. Not only will it look better for longer but it is grippier than a gloss topsheet due to its texture, so it acts as a built in topsheet too. Strategically placed  Carbonium Laminate Technology in the top & base of board drastically increases power & performance. This lightweight design will keep these boards riding for years to come. Alongside their patented R.C. (Rocker & Camber) profiles, Never Summer has developed their  Vario Power Grip Sidecut. This specific sidecut geometry combats the lack of stability & edge hold which is often a side effect of more traditional rocker profiles. The  Low Profile Tip/ Tail Damper maximises the amount of base material in contact with the snow. This helps you to ollie & nollie higher & add stability to landings whilst also providing more float when in deep snow. STS Pre-tensioned Fibreglass is a pre-hardened, layered laminate with added elastomer stringers. This advanced fibreglass provides unmatched strength & performance. Bi-Lite Fibreglass has many of the characteristics of STS Fibreglass with an ultra light glass fibre matrix. Taking the Custom Flightcore & making it even lighter, the NS Superlight Wood Core has been developed especially for the new Carbonium Series. Harmonic Tip/ Tail Dampers reduce the amount of vibration at the nose & tail without affecting the liveliness & a pop of the cambered areas Designed specifically for the Carbonium Series, the CDS Dampening System provides unmatched stability & control at high speeds. Thin elastomeric rubber stringers reduce vibration from the edge & stringers below the inserts & Elastomeric Underfoot Stabilizers are placed directly below the mounting area in order to increase vibration absorption & high speed performance while also reducing fatigue. Whereas conventional ABS Sidewalls have a tenden


...
Archived Product
£519.95
The Extended Transition Rocker Camber Profile was developed specifically for the Proto HD & HDX. The result is enhanced float & glide with effortless edge-to-edge transitions. The Blunted True-Twin Shape & new Low Profile Tip & Tail improve the freestyle capabilities of this board by increasing the effective edge & maximising base contact right to the tip & tail. The Proto HD & HDX are true all terrain boards that span park, pipe, Jib & freeride. Note: the Proto HDX is a wider version of the standard Proto HD. Specification: Profile: Extended Transition Rocker Camber Setback: 0 Flex: Medium Length CM Effective edge MM Waist Width MM Rider Weightkg 158 1250 264 63-86  

Features:
Like the Original RC Profile (featured on the Cobra) the Extended Transition Rocker Camber Profile provides the best of both rocker & camber in one. Rocker between your feet offers a forgiving feel, increases floatation & mobility while camber outside of the bindings provides explosive pop & superior edge hold. The difference with the Extended Transition version is a longer transition area where the camber blends into the nose & tail. This decreases the amount of pressure in that area allowing for free-flowing edge transfer whilst still providing solid edge hold when the camber is engaged. The durable, scratch & chip resistant Carbonium Topsheet gives the board a premium look to match its build quality. Not only will it look better for longer but it offers more grip than a regular gloss top sheet due to its texture, so it acts as a built in stomp pad too. Strategically placed Carbonium Laminate Technology in the top & base of board drastically increases power & performance. This lightweight design will keep these boards riding for years to come. Alongside their patented R.C. (Rocker & Camber) profiles, Never Summer has developed their Vario Power Grip Sidecut. This specific sidecut geometry combats the lack of stability & edge hold which is often a side effect of older generation rocker profiles. The Low Profile Tip/ Tail maximises the amount of base material in contact with the snow. This helps you to ollie & nollie higher & add stability to landings whilst also providing more float when in deep snow. STS Pre-tensioned Fiberglass is a pre-hardened, layered laminate with added elastomer stringers. This advanced fibreglass provides unmatched strength & performance. Bi-Lite Fiberglass has many of the characteristics of STS Fiberglass with an ultra-light glass fibre matrix. Taking the Custom Flightcore

...
Archived Product
£356.95
The Ripsaw is the go-to twin board for the aggressive rider who shred everywhere. Featuring the new Camber Rocker (CR) profile from Never Summer with amplified camber areas that are longer & deeper than the traditional Rocker Camber (RC) boards, you get more edge hold & pop than ever before, whilst retaining float & playfulness. Specification: Profile: Extended Rocker Camber (EXRC) Setback: 0 Flex: Stiff Length CM Effective edge MM Waist Width MM Rider Weightkg 156 1170 252 75-93 159 1200 254 82-100  

Features:
Like the Original RC Profile (featured on the Cobra) the Extended Transition Rocker Camber Profile provides the best of both rocker & camber in one. Rocker between your feet offers a forgiving feel, increases floatation & mobility while camber outside of the bindings provides explosive pop & superior edge hold. The difference with the Extended Transition version is a longer transition area where the camber blends into the nose & tail. This decreases the amount of pressure in that area allowing for free-flowing edge transfer whilst still providing solid edge hold when the camber is engaged. Alongside their patented R.C. (Rocker & Camber) profiles, Never Summer has developed their Vario Power Grip Sidecut. This specific sidecut geometry combats the lack of stability & edge hold which is often a side effect of older generation rocker profiles. Carbon V’s are positioned in the nose & tail of the board, they extend out from the inserts to the effective edge & into the tip & tail. This Carbon VXR configuration stiffens the board torsionally in those areas increasing response & maximising pop while remaining softer between the bindings for torsional control. The Low Profile Tip/ Tail maximises the amount of base material in contact with the snow. This helps you to ollie & nollie higher & add stability to landings whilst also providing more float when in deep snow. STS Pre-tensioned Fiberglass is a pre-hardened, layered laminate with added elastomer stringers. This advanced fiberglass provides unmatched strength & performance. Bi-Lite Fiberglass is an ultra-light glass reinforced fiber matrix that deli

...
Archived Product

Never Summer Funslinger 2015 Snowboard

A soft asymmetrical twin freestyle deck designed to dominate park, the ‘Slinger sets a new standard for twin asymetrical freestyle boards. It features a deeper heelside sidecut, a new Boost Flex Core and Ripsaw profile for MEGA pop and SUPER stability while retaining a forgiving flex. It’s one of the lightest freestyle boards on the market and it comes complete with Never Summer’s legendary stability, snap and durability. Specification: Profile: Ripsaw profile - Extended Rocker Camber (EXRC) Setback: 0 Flex: Soft Length Effective Edge -MM Waist Width - MM 151 1150 248 153 1170 250 156 1190 253 NOTE: DIE CUT BASE COLOURS AND COMBINATIONS MAY VARY Features: Extended Transition Rocker Camber Profile provides the best of both rocker and camber in one. Rocker between your feet offers a
forgiving feel, increases floatation and mobility while camber outside of the bindings provides explosive pop and superior edge hold. The difference with the Extended Transition version is a longer transition area where the camber blends into the nose and tail. This decreases the amount of pressure in that area allowing for free-flowing edge transfer whilst still providing solid edge hold when the camber is engaged. Carbon V’s are positioned in the nose and tail of the board, they extend out from the inserts to the effective edge and into the tip and tail. This Carbon VXR configuration stiffens the board torsionally in those areas increasing response and maximising pop while remaining softer between the bindings for torsional control. Alongside their patented R.C. (Rocker & Camber)
profiles, Never Summer has developed their Vario Power Grip Sidecut. This specific sidecut geometry combats the lack of stability and edge hold which is often a side effect of older generation rocker profiles. The Low Profile Tip/Tail maximises the amount of base material in contact with the snow. This helps you to ollie and nollie higher and add stability to landings whilst also providing more float when in deep snow. STS Pre-tensioned Fiberglass is a pre-hardened, layered laminate with added e
RIP - This product is no longer available on our network. It was last seen on 26.10.2016

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£494.95

Product Description

A soft asymmetrical twin freestyle deck designed to dominate park, the ‘ Slinger sets a new standard for twin asymetrical freestyle boards. It features a deeper heelside sidecut, a new Boost Flex Core & Ripsaw profile for MEGA pop & SUPER stability while retaining a forgiving flex. It’s one of the lightest freestyle boards on the market & it comes complete with Never Summer’s legendary stability, snap & durability. Specification: Profile: Ripsaw profile
- Extended Rocker Camber (EXRC) Setback: 0 Flex: Soft Length Effective Edge -MM Waist Width
- MM 151 1150 248 153 1170 250 156 1190 253 NOTE: DIE CUT BASE COLOURS & COMBINATIONS MAY VARY

Features:
Extended Transition Rocker Camber Profile provides the best of both rocker & camber in one. Rocker between your feet offers a forgiving feel, increases floatation & mobility while camber outside of the bindings provides explosive pop & superior edge hold. The difference with the Extended Transition version is a longer transition area where the camber blends into the nose & tail. This decreases the amount of pressure in that area allowing for free-flowing edge transfer whilst still providing solid edge hold when the camber is engaged. Carbon V’s are positioned in the nose & tail of the board, they extend out from the inserts to the effective edge & into the tip & tail. This Carbon VXR configuration stiffens the board torsionally in those areas increasing response & maximising pop while remaining softer between the bindings for torsional control. Alongside their patented R.C. (Rocker & Camber) profiles, Never Summer has developed their Vario Power Grip Sidecut. This specific sidecut geometry combats the lack of stability & edge hold which is often a side effect of older generation rocker profiles. The Low Profile Tip/ Tail maximises the amount of base material in contact with the snow. This helps you to ollie & nollie higher & add stability to landings whilst also providing more float when in deep snow. STS Pre-tensioned Fiberglass is a pre-hardened, layered laminate with added e

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Carbon - A common element, in its simplest form is coal. The element can take different form from hard diamonds through graphite to soft carbon
Summer - The season between Spring and Autumn. Usually the hottest season of the year
soft - A descriptive word for an item/sound which is gentle to the touch or ears
edge - Enhanced data rates for GSM evolution also known as enhanced GPRS. A mobile phone technology with improved data transmission rates.
edge - The point at which two surfaces meet
Patented - Something that has legal rights not to be copied, unique.
Specification - A description of a product with the details of its attributes.
Snow - Water and vapour in clouds that falls in a white crystal form leaving a white layer.
Width - The measurement of something from one side to the other.
Twin - A pair of people or animals that are born at the same time.
Solid - Something that is firm and not liquid, a hard shape that cannot be changed easily.
Rocker - Someone who enjoys rock music, also a form of chair that rocks backwards and forwards.

Supplier Information

Edge And Wax
Page Updated: 2015-04-11 04:04:33

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu