Specifications CPU compatibility
- Socket LGA775, AM3, AM2+, AM2, 754, 939 & 940 Heatsink

Dimensions
-



...

Better performance, easier installation! These new additions to the famous Zalman 7000 series give guaranteed cooling satisfaction! They offer slightly enhanced performance to the CNPS7700 coolers & are smaller, lighter, have blue LED lighting & offer AM2 socket compatibility. Features
- 1. Same performance as CNPS7700 but more compact & easier installation 2. Incredible thermal efficiency from 0.17 °C/W max 3. 360 degree copper fin design is beautiful & effective 4. 110mm blue LED fan for best airflow & minimal noise 5. FANMATE2 variable fan speed controller included 6. Compatible with Intel LGA1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2/939/940/754 Product differences The CNPS7500 is offered in two versions
- copper (CU) & aluminium/copper hybrid (ALCU). Both coolers are identical except that the CU version is heavier & offers better cooling thanks to the superior conduction of copper versus aluminium. In practice this equates to a lower CPU running temperature of around 3°C for a high-end system. If you crave the lowest possible CPU temperature then we suggest you purchase the CU version, but otherwise the ALCU version still offers excellent performance & is less expensive. Motherboard cooling As with all Zalman's 7000 series coolers, the unique design of the product allows not only the processor to be cooled, but also its surrounding components as shown on the image below. Important components such as the Northbridge chip, RAM, VGA & FET circuitry receive a good share of the cooler's airflow, which increases their reliability & lifespan. Compatibility considerations Socket 775-based motherboards will need to be removed from the chassis to be able to install the CNPS7500. The CNPS7500 is incompatible with Athlon XP (socket A, 462) & Pentium 3 (Socket 370). Specifications
- Compatibility
- Intel LGA1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2/939/940/754 Max TDP
- All except up to 95W for FM1, AM3+, AM3 & AM2+ Installation Method
- Intel
- screws, requires motherboard removal; AMD
- clips, does not require motherboard removal Base material
- Pure Copper Thermal resistanc
- 0.17
- 0.23°C/W * Weight
- 848g Heatsink

Dimensions
- 121 (L) x 121 (W) x 67 (H) mm Surface area
- 3500 sq cm Fan

Dimensions
- 110 x 110 x 25 mm Rotational speed
- 1150
- 2300 RPM * Acoustic noise level
- 17
- 32 d BA * Fan bearing type
- 2-Ball FANMATE2

Dimensions
- 70 (L) x 26 (H) x 26 (W) mm FANMATE2 weight
- 20g FANMATE2 output voltage
- 5
- 11 VDC FANMATE2 maximum fan wattage
- 6 W FANMATE2 cable length
- 800 mm































...

Zalman have updated their premium low-profile cooler, CNPS8000A. The new CNPS8000B now has a 92mm PWM fan & offers better performance than its predecessor. Because CPUs are getting hotter & hotter, we have seen heatsinks getting bigger & bigger to cope with the cooling demands. The problem with very large heatsinks is that they sometimes cannot be used in a lower profile chassis where space is at a premium. Zalman have successfully addressed this problem with the CNPS8000b without sacrificing performance. 1. Noiseless & vibration-free in silent mode, from 20d B 2. Four heatpipes for quicker heat dispersion 3. Optimised fins for high performance & low weight 4. Low profile cooler, only 66mm tall 5. Supplied with a quiet 92mm PWM fan, from 20d BA 6. Compatible with Intel LGA1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 At only 66 mm tall, the CNPS8000b is capable of cooling any CPU with which it is compatible. It does this with the aid of four C-shaped heatpipes that transfer the heat from the copper base to the top edge of the fins. This allows the whole heatsink to be used more efficiently. Attached above the heatsink is a legendary Zalman 92mm PWM fan which has been designed to vary its speed depending on the temperature of the CPU. The minimum noise is only 20 d BA, but when the CPU is pushed to its limit, the fan speed can increase to provide more cooling. Of course this works in reverse; the fan speed will decrease as the temperature of the CPU drops. This method gives the user piece of mind knowing that when the CPU needs it, extra cooling is provided.

Specification
- Compatibility
- Intel LGA1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 Max TDP
- All Installation Method
- Intel & AMD
- backplate, requires motherboard removal

Dimensions
- 108 (L) X 108 (W) X 66 (H)mm Weight
- 330g Materials
- Fins: Aluminium / Base: Copper Dissipation Area
- 2872 cm 2 Heatpipes
- 4 C-Shaped Heatpipes Fan
- 4-pin 92mm PWM Fan Fan RPM
- 1400 to 2800rpm ±10% Noise
- 20 to 32 d BA ±10% Fan Bearing
- FSB (Fluid Shield Bearing)

















...

The Zalman CNPS80G REV.1 CPU Cooler features an ultra quiet 85mm PWM fan, excellent cooling performance & easy installation. The CPU cooler is fully compatible with the latest high performance Intel & AMD processors. Featuring FHS (Flower Heatsink) technology by producing 3 dimensional radial shape finds through the compression process of an aluminium plate. Technical Specifications Socket Type: Intel: LGA115X / 775 / CPUs /LGA1200 AMD: AM4 / AM3+ / AM3 CPUs Dimensions: 123.7 (L) x 102 (W) x 61.4 (H)mm Weight: 180g Materials: Pure Aluminum Heat Dissipation Area: 2, 268&13216; TDP: 65W Bearing Type: Long Life Bearing Fan Speed: 1, 000~2, 000 ± 10% RPM Max Noise Level: 25.3 d BA ± 10% Max Airflow :27.18 CFM Max. Air Pressure :1.51mm H&8322;O Life Span: 50, 000 hours Power Consumption :1.2W Rated Voltage: 12V Rated Current :0.1A Fan Connector Type: 4-Pin PWM ...

Zalman's latest compact 'top down' CPU coolers offer two heat-pipes & copper coated aluminium fins that are designed for maximum cooling while the down draft from the quiet 110mm fan cools not only the CPU but also provides powerful cooling of other motherboard components around the cooler. Features
- 1. Compatible with slim tower / low profile HTPCs, only 60mm tall 2. Automatic fan speed control with PWM enabled fan 3. Patented curved heatpipe design 4. Ultra-thin 0.2mm fins for minimised weight 5. Compatible with Intel LGA1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2

Specification
- Compatibility
- Intel LGA1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 Max TDP
- All Installation Method
- Intel & AMD
- backplate, requires motherboard removal

Dimensions
- 120 (L) x 120 (W) x 60 (H)mm Weight
- 400g Material
- Fin Aluminium, Base Copper Dissipation Area
- 1960 cm 2 Heatpipes
- 2 Fan
- 110mm Black PWM Fan Fan Bearing
- Long Life Bearing Fan RPM
- 1000 to 1500 RPM ±10% Noise
- 19 to 25 d BA ±10% Rated Voltage
- 12V



















...

We are delighted to announce that Zalman have produced a new flagship product
- the CNPS9700 CPU cooler. To look at the cooler,
...

Zalman CNPS9900-DF Dual Fan Ultra Quiet CPU Cooler Sporting high-end cooling performance, dual fan technology, composite heatpipes & broad compatibility, the CNPS9900-DF has a lot going for it & therefore cannot be ignored if you require a great looking/high performance CPU cooler. Features
- 1. New & enhanced CNPS9900 with dual fan technology 2. Triple composite heatpipes for greater cooling 3. Supplied with Zalman ZM-STG2 thermal paste 4. Nickel plated 5. Very quiet from only 19.0 d B (A) 6. Compatible with Intel LGA2011/1366/1155/1156/775 & AMD FM2/FM1/AM3+/AM3/AM2+/AM2 Cross Bending Fin Technology Front & rear airflow incident angles are designed in different directions. This cross bending fin technology produces cooling performance with minimum noise. Triple Composite Heatpipes Three composite heat pipes & pure copper cross bending fins quickly cool down the heat from the CPU. Zalman's ' Composite Heatpipe' features a sintered metal type wick, resulting in outstanding capillary pumping performance & a high thermal conductive design of axial grooves which increases the heat transfer rate by 50% compared to standard heatpipes. Dual Blue LED Fans Cross Bending ultra quiet powerful 120mm front fan & 140mm centre fan produces excellent performance. To top things off both fans produce a beautiful blue LED glow. Mirror Base Zalman's unique sanding process provides excellent heat transfer ability. Compatible with Midi Cases With a height of 154mm & 180mm width the CNPS9900-DF fits in a variety of cases including normal midi cases. High Compatibility Compatible with Intel Socket LGA 2011, 1366, 1155, 1156, 775 & AMD Socket FM2, FM1, AM3+, AM3, AM2+ & AM2. All thanks to the supplied clips & brackets. High Performance thermal Compound ZM-STG2 helps to maximise the heat transfer from CPU to CNPS9900-DF base allowing optimal cooling performance. Specifications
- Compatibility
- Intel LGA2011/1366/1155/1156/775 & AMD FM2/FM1/AM3+/AM3/AM2+/AM2 Max TDP
- All Installation Method
- Intel & AMD
- backplate, requires motherboard removal

Dimensions
- 140 (L) x 100 (W) x 154 (H)mm Weight
- 850g Materials
- Copper (base & fins) Dissipation Area
- 6800 cm 2 Heat pipe QTY
- 3EA Fan Speed
- Front 120mm 1000rpm ±10% (3pin), Centre 140mm 900 ~ 1400rpm ±10% (4pin) Noise Level
- 19 ~ 27d BA ±10% Bearing Type
- Long Life Bearing Control Method
- PWM Control, Auto Restart Input Voltage
- 12V

















...

Powerful Cooling Performance [ Qmax: 300W] Compatible Processors Pentium 4, Celeron D, Pentium D, Core 2 Duo, Core 2 Quad, Core 2 Extreme, Pentium Dual Core, Core i 7, Core i 5, Core i 3, Core i 7 Extreme, Sempron, Athlon, Athlon FX, Opteron, Phenom, Athlon X2, Phenom II, Athlon II Optimally designed pure copper fins effectively disperse heat away from the CPU via composite heatpipes, while the high capacity 135mm fan quickly cools the heatsink for stable operation of high performance CPUs. The entire copper heatsink of CNPS9900 MAX is ˜ Black-Pearl Nickel Plated for long-term corrosion resistance, while the deep ˜ Black-Pearl tone along with the high intensity Blue LEDs reinforce its powerful aesthetics. Specifications

Dimensions
- 94 (L) x 131 (W) x 152 (H)mm Weight
- 755g Materials
- Pure Copper/ Black-Pearl Nickel Plated Fan Bearing
- Long life bearing Fan RPM RC7P Connected
- 900 ~ 1, 500 rpm ± 10% RC7P Not Connected
- 900 ~ 1, 700 rpm ± 10% Noise RC7P Connected
- 18 ~ 27 d BA ± 10% RC7P Not Connected
- 18 ~ 30 d BA ± 10%









...

Specifications CPU socket compatibility
- Socket LGA 1156, 1366, 775, AM2+, AM2, 754, 939 & 940 Intel CPU compatibility
-

...

The Zalman CNPS9X Optima offers a whopping 180 watts TDP despite its compact design. In combination with the enclosed thermal grease ZM-STG2M, this is sufficient even for the fastest Intel & AMD processors. Thanks to the four copper heatpipes running through the base plate, the heat quickly reaches the aluminum fins, through which a direct-fitting, quiet 120 mm fan with white LEDs removes the air. The Zalman CNPS9X Tower cooler with up to 180W TDP cooling capacity Four Ushaped direct-touch copper heatpipes 1x 120mm PWM fan with white LEDs Easy installation Including Zalman thermal grease High compatibility with AMD & Intel Powerful tower cooler with white LEDs The Zalman CNPS9X Optima is a compact tower cooler with four copper U-shaped heatpipes. These run through the bottom plate so that they touch the processor directly. Thus, the contact surface consists of both aluminium & copper. The heat is transferred very quickly into the heatpipes & from there into the aluminium fins of the radiator. The supplied 120 mm fan with white LEDs ensures a quick removal of heat. Zalman equips it with a rifle bearing for a smoother ride & longer life. The shark fin blades reduce vibration & increase airflow. The 120er fan rotates at 600 to 1500 rpmproducing a very low noise level with a maximum volume of 26 db (A) at a delivery volume of 61 CFM. Specification:

Dimensions (with fans): 123 x 156 x 72 mm (W x H x D) Weight (with fan): approx. 594 g

Material: copper (heatpipes), aluminum (base plate, lamellas), plastic (fan) Colour: Silver / Copper (Radiator), Black (Fan) Heatpipes: 4x made from copper 1x 120 mm max 26 d B (A) 600 1, 500 rpm 61 CFM Connection: 4pin PWM Operating voltage: 12V Compatibility: Intel Socket: LGA 775, 115x & 1200 AMD Socket: AM3 (+), AM4, FM2 (+)



...